Qemu currently supports up to 16 CPUs, so increase the default from 4 to 16.
Bload-o-meter shows only an increase of 800 bytes with this change.
Signed-off-by: Helge Deller <deller@gmx.de>

With CONFIG_KALLSYMS_ALL=y, the function is_ksym_addr() is used to
determine if a symbol is from inside the kernel range. For that the
given symbol address is checked if it's inside the _stext to _end range.

Although this is correct, some architectures (e.g. parisc) may have the
init area before the _stext address and as such the check in
is_ksym_addr() fails.  By extending the range check to include the init
section, __is_kernel() will now detect symbols in this range as well.

This fixes an issue on parisc where addresses of kernel functions in
init sections aren't resolved to their symbol names.
Signed-off-by: Helge Deller <deller@gmx.de>

No need to have an own hpmc_stack. Just re-use the toc_stack of the
monarch CPU as either a TOC or a HPMC will happen at the same time.
This reduces the kernel memory footprint by 16k.
Signed-off-by: Helge Deller <deller@gmx.de>

Before this patch, the TOC code used a pre-allocated stack of 16kb for
each possible CPU. That space overhead was the reason why the TOC
feature wasn't enabled by default for 32-bit kernels.

This patch rewrites the TOC code to use a per-cpu stack. That way we use
much less memory now and as such we enable the TOC feature by default on
all kernels.

Additionally the dump of the registers and the stacktrace wasn't
serialized, which led to multiple CPUs printing the stack backtrace at
once which rendered the output unreadable.
Now the backtraces are nicely serialized by a lock.
Signed-off-by: Helge Deller <deller@gmx.de>

This patch fixes the following build error for source file
drivers/scsi/pcmcia/sym53c500_cs.c:

In file included from ./include/linux/bug.h:5,
                 from ./include/linux/cpumask.h:14,
                 from ./include/linux/mm_types_task.h:14,
                 from ./include/linux/mm_types.h:5,
                 from ./include/linux/buildid.h:5,
                 from ./include/linux/module.h:14,
                 from drivers/scsi/pcmcia/sym53c500_cs.c:42:
drivers/scsi/pcmcia/sym53c500_cs.c: In function ‘SYM53C500_intr’:
./arch/parisc/include/asm/bug.h:28:2: error: expected expression before ‘do’
   28 |  do {        \
      |  ^~
./arch/parisc/include/asm/io.h:276:20: note: in expansion of macro ‘BUG’
  276 | #define outb(x, y) BUG()
      |                    ^~~
drivers/scsi/pcmcia/sym53c500_cs.c:124:19: note: in expansion of macro ‘outb’
  124 | #define REG0(x)  (outb(C4_IMG, (x) + CONFIG4))
      |                   ^~~~
drivers/scsi/pcmcia/sym53c500_cs.c:362:2: note: in expansion of macro ‘REG0’
  362 |  REG0(port_base);
      |  ^~~~

Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Helge Deller <deller@gmx.de>

There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field.  Move the parisc pdc_stable sysfs code to use default_groups
field which has been the preferred way since aa30f47c ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.

Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Add a simplistic keyboard driver for usage of PDC I/O functions
with kgdb. This driver makes it possible to use KGDB with QEMU.
Signed-off-by: Helge Deller <deller@gmx.de>

The definitions for pdc_toc_pim_11 and pdc_toc_pim_20 are wrong since they
include an entry for a hversion field which doesn't exist in the specification.

Fix this and clean up some whitespaces so that the whole file will be in
sync with it's copy in the SeaBIOS-hppa sources.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.16

This patch adds two new LWS routines - lws_atomic_xchg and lws_atomic_store.

These are simpler than the CAS routines.  Currently, we use the CAS
routines for atomic stores.  This is inefficient since it requires
both winning the spinlock and a successful CAS operation.

Change has been tested on c8000 and rp3440.

In v2, I moved the code to disble/enable page faults inside the spinlocks.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

The parisc architecture lacks general hardware support for compare and swap.
Particularly for userspace, it is difficult to implement software atomic
support. Page faults in critical regions can cause processes to sleep and
block the forward progress of other processes.  Thus, it is essential that
page faults be disabled in critical regions. For performance reasons, we
also need to disable external interrupts in critical regions.

In order to do this, we need a mechanism to trigger COW breaks outside the
critical region. Fortunately, parisc has the "stbys,e" instruction. When
the leftmost byte of a word is addressed, this instruction triggers all
the exceptions of a normal store but it does not write to memory. Thus,
we can use it to trigger COW breaks outside the critical region without
modifying the data that is to be updated atomically.

COW breaks occur randomly.  So even if we have priviously executed a "stbys,e"
instruction, we still need to disable pagefaults around the critical region.
If a fault occurs in the critical region, we return -EAGAIN. I had to add
a wrapper around _arch_futex_atomic_op_inuser() as I found in testing that
returning -EAGAIN caused problems for some processes even though it is
listed as a possible return value.

The patch implements the above. The code no longer attempts to sleep with
interrupts disabled and I haven't seen any stalls with the change.

I have attempted to merge common code and streamline the fast path.  In the
futex code, we only compute the spinlock address once.

I eliminated some debug code in the original CAS routine that just made the
flow more complicated.

I don't clip the arguments when called from wide mode. As a result, the LWS
routines should work when called from 64-bit processes.

I defined TASK_PAGEFAULT_DISABLED offset for use in the lws_pagefault_disable
and lws_pagefault_enable macros.

Since we now disable interrupts on the gateway page where necessary, it
might be possible to allow processes to be scheduled when they are on the
gateway page.

Change has been tested on c8000 and rp3440. It improves glibc build and test
time by about 10%.

In v2, I removed the lws_atomic_xchg and and lws_atomic_store calls. I
also removed the bug fixes that were not directly related to this patch.

In v3, I removed the code to force interruptions from
arch_futex_atomic_op_inuser(). It is always called with page faults
disabled, so this code had no effect.

In v4, I fixed a typo in depi_safe line.

In v5, I moved the code to disable/enable page faults inside the spinlocks.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

In debugging kernel panics, I believe it is useful to know what type
of page fault caused the termination. "Bad Address" is too vague.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

It is dangerous to call faulthandler_disabled() when user_mode(regs)
is true.  The task pagefault_disabled counter is racy and it is not
updated atomically on parisc. As a result, calling faulthandler_disabled()
may cause erroneous termination.

We now handle execption fixups and termination when user_mode(regs) is
false in handle_interruption(). Thus, we can just remove the
faulthandler_disabled() check from do_page_fault().
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Use register r29 instead of register r8 to signal faults when accessing
user memory. In case of faults, the fixup routine will store -EFAULT in
this register.

This change saves up to 752 bytes on a 32bit kernel, partly because the
compiler doesn't need to save and restore the old r8 value on the stack.

bloat-o-meter results for usage with r29 register:
add/remove: 0/0 grow/shrink: 23/86 up/down: 228/-980 (-752)

bloat-o-meter results for usage with r28 register:
add/remove: 0/0 grow/shrink: 28/83 up/down: 296/-956 (-660)
Signed-off-by: Helge Deller <deller@gmx.de>

In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:

no_context:

        if (!user_mode(regs) && fixup_exception(regs)) {
                return;
        }

        parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);

Apart from the error messages, the two blocks of code perform the same
function.

We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().

Note: I didn't try to fix the formatting of this code block.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

While working on the rewrite to the light-weight syscall and futex code, I
experimented with using a hash index based on the user physical address of
atomic variable. This exposed two problems with the lpa and lpa_user defines.

Because of the copy instruction, the pa argument needs to be an early clobber
argument. This prevents gcc from allocating the va and pa arguments to the same
register.

Secondly, the lpa instruction can cause a page fault so we need to catch
exceptions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Fixes: 116d7533 ("parisc: Use lpa instruction to load physical addresses in driver code")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.2+

The depi instruction is similar to the extru instruction on 64-bit machines.
It leaves the most-significant 32 bits of the target register in an undefined
state.  On 64-bit machines, the macro uses depdi to perform safe deposits in
the least-significant 32 bits.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

As commit 7ae4a78d ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.

Do similar for parisc to clean up the Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix TUI exit screen refresh race condition in 'perf top'.

 - Fix parsing of Intel PT VM time correlation arguments.

 - Honour CPU filtering command line request of a script's switch events
   in 'perf script'.

 - Fix printing of switch events in Intel PT python script.

 - Fix duplicate alias events list printing in 'perf list', noticed on
   heterogeneous arm64 systems.

 - Fix return value of ids__new(), users expect NULL for failure, not
   ERR_PTR(-ENOMEM).

* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf top: Fix TUI exit screen refresh race condition
  perf pmu: Fix alias events list
  perf scripts python: intel-pt-events.py: Fix printing of switch events
  perf script: Fix CPU filtering of a script's switch events
  perf intel-pt: Fix parsing of VM time correlation arguments
  perf expr: Fix return value of ids__new()

Pull i2c fixes from Wolfram Sang:
 "Better input validation for compat ioctls and a documentation bugfix
  for 5.16"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Docs: Fixes link to I2C specification
  i2c: validate user data in compat ioctl

Pull x86 fix from Borislav Petkov:

 - Use the proper CONFIG symbol in a preprocessor check.

* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use the proper name CONFIG_FW_LOADER

When the following command is executed several times, a coredump file is
generated.

	$ timeout -k 9 5 perf top -e task-clock
	*******
	*******
	*******
	0.01%  [kernel]                  [k] __do_softirq
	0.01%  libpthread-2.28.so        [.] __pthread_mutex_lock
	0.01%  [kernel]                  [k] __ll_sc_atomic64_sub_return
	double free or corruption (!prev) perf top --sort comm,dso
	timeout: the monitored command dumped core

When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.

However SLsmg_reinit_smg() maybe be called by another thread.

SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.

SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.comSigned-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: yaowenbin <yaowenbin1@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 0e0ae874 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:

  # perf list
  ...
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  ...

Notice how the events are listed twice.

The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".

Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.

Fixes: 0e0ae874 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull input fixes from Dmitry Torokhov:
 "Two small fixups for spaceball joystick driver and appletouch touchpad
  driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: spaceball - fix parsing of movement data packets
  Input: appletouch - initialize work before device registration

Hugh Dickins reported the following

	My tmpfs swapping load (tweaked to use huge pages more heavily
	than in real life) is far from being a realistic load: but it was
	notably slowed down by your throttling mods in 5.16-rc, and this
	patch makes it well again - thanks.

	But: it very quickly hit NULL pointer until I changed that last
	line to

        if (first_pgdat)
                consider_reclaim_throttle(first_pgdat, sc);

The likely issue is that huge pages are a major component of the test
workload.  When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check

        if (IS_ENABLED(CONFIG_COMPACTION) &&
            sc->order > PAGE_ALLOC_COSTLY_ORDER &&
            compaction_ready(zone, sc)) {
                sc->compaction_ready = true;
                continue;
        }

If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.

Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time.  In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling.  In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.

Commit 69392a40 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse.  Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.

To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback.  If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly.  Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.

Alexey's original case was the most straight forward

	for i in {1..3}; do tail /dev/zero; done

On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.

Alexey's second test case added watching a youtube video while tail runs
10 times.  On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches.  With this
patch applies, the video plays similarly to 5.15.

[lkp@intel.com: Fix W=1 build warning]

Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/Reported-and-tested-by: Alexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: Mike Galbraith <efault@gmx.de>
Reported-and-tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Tracked-by: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a40 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc mm fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm (userfaultfd and damon)"

* akpm:
  mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
  userfaultfd/selftests: fix hugetlb area allocations

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers. The lpfc one doesn't look exploitable,
  but nasty things could happen in string operations if mybuf ends up
  with an on stack unterminated string"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pvscsi: Set residual data length conditionally
  scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()

DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').

Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed.  This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.

Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:

  testing events (fork, remap, remove):
		ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)

The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved.  There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.

Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently.  The issue was uncovered by commit
8ba6e864 ("userfaultfd/selftests: reinitialize test context in each
test").

For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file.  This means that at mmap time, pages are
reserved for the src and dst areas.  At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area.  Then, a child is forked to fault in the dst area.  Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping.  The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.

Fix by not creating reserves for the dst area.  In this way the child
can use free (non-reserved) pages.

Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy.  The test does not do
this.  So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping.  There is no need to create a hugetlb file in the
non-shared case.

Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The link to the I2C specification is broken. Although
"https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is
behind a login-wall. Thus, an additional link has been added (which
doesn't require a login) and the NXP official docs link has been
updated.
Signed-off-by: Deep Majumder <deep@fastmail.in>
[wsa: minor updates to text and commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings

Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb456 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

The spaceball.c module was not properly parsing the movement reports
coming from the device.  The code read axis data as signed 16-bit
little-endian values starting at offset 2.

In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3.  This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf

If this ever worked properly, it was in the time before Git...
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.

This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.

So this patch moves dev->work initialization before registering input
device

Fixes: 5a6eb676 ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull drm fixes from Dave Airlie:
 "This is a bit bigger than I'd like, however it has two weeks of amdgpu
  fixes in it, since they missed last week, which was very small.

  The nouveau regression is probably the biggest fix in here, and it
  needs to go into 5.15 as well, two i915 fixes, and then a scattering
  of amdgpu fixes. The biggest fix in there is for a fencing NULL
  pointer dereference, the rest are pretty minor.

  For the misc team, I've pulled the two misc fixes manually since I'm
  not sure what is happening at this time of year!

  The amdgpu maintainers have the outstanding runpm regression to fix
  still, they are just working through the last bits of it now.

  Summary:

  nouveau:
   - fencing regression fix

  i915:
   - Fix possible uninitialized variable
   - Fix composite fence seqno icrement on each fence creation

  amdgpu:
   - Fencing fix
   - XGMI fix
   - VCN regression fix
   - IP discovery regression fixes
   - Fix runpm documentation
   - Suspend/resume fixes
   - Yellow Carp display fixes
   - MCLK power management fix
   - dma-buf fix"

* tag 'drm-fixes-2021-12-31' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Changed pipe split policy to allow for multi-display pipe split
  drm/amd/display: Fix USB4 null pointer dereference in update_psp_stream_config
  drm/amd/display: Set optimize_pwr_state for DCN31
  drm/amd/display: Send s0i2_rdy in stream_count == 0 optimization
  drm/amd/display: Added power down for DCN10
  drm/amd/display: fix B0 TMDS deepcolor no dislay issue
  drm/amdgpu: no DC support for headless chips
  drm/amdgpu: put SMU into proper state on runpm suspending for BOCO capable platform
  drm/amdgpu: always reset the asic in suspend (v2)
  drm/amd/pm: skip setting gfx cgpg in the s0ix suspend-resume
  drm/i915: Increment composite fence seqno
  drm/i915: Fix possible uninitialized variable in parallel extension
  drm/amdgpu: fix runpm documentation
  drm/nouveau: wait for the exclusive fence after the shared ones v2
  drm/amdgpu: add support for IP discovery gc_info table v2
  drm/amdgpu: When the VCN(1.0) block is suspended, powergating is explicitly enabled
  drm/amd/pm: Fix xgmi link control on aldebaran
  drm/amdgpu: introduce new amdgpu_fence object to indicate the job embedded fence
  drm/amdgpu: fix dropped backing store handling in amdgpu_dma_buf_move_notify

This merges two fixes that haven't been sent to me yet, but I wanted to get in.

One amdgpu fix, but one nouveau regression fixer.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make sure that finish_mount_kattr() is called after mount_kattr was
succesfully built in both the success and failure case to prevent
leaking any references we took when we built it.  We returned early if
path lookup failed thereby risking to leak an additional reference we
took when building mount_kattr when an idmapped mount was requested.

Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 9caccd41 ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from.. Santa?

  No regressions on our radar at this point. The igc problem fixed here
  was the last one I was tracking but it was broken in previous
  releases, anyway. Mostly driver fixes and a couple of largish SMC
  fixes.

  Current release - regressions:

   - xsk: initialise xskb free_list_node, fixup for a -rc7 fix

  Current release - new code bugs:

   - mlx5: handful of minor fixes:

   - use first online CPU instead of hard coded CPU

   - fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'

   - fix skb memory leak when TC classifier action offloads are disabled

   - fix memory leak with rules with internal OvS port

  Previous releases - regressions:

   - igc: do not enable crosstimestamping for i225-V models

  Previous releases - always broken:

   - udp: use datalen to cap ipv6 udp max gso segments

   - fix use-after-free in tw_timer_handler due to early free of stats

   - smc: fix kernel panic caused by race of smc_sock

   - smc: don't send CDC/LLC message if link not ready, avoid timeouts

   - sctp: use call_rcu to free endpoint, avoid UAF in sock diag

   - bridge: mcast: add and enforce query interval minimum

   - usb: pegasus: do not drop long Ethernet frames

   - mlx5e: fix ICOSQ recovery flow for XSK

   - nfc: uapi: use kernel size_t to fix user-space builds"

* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  fsl/fman: Fix missing put_device() call in fman_port_probe
  selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
  Documentation: fix outdated interpretation of ip_no_pmtu_disc
  net/ncsi: check for error return from call to nla_put_u32
  net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
  net: fix use-after-free in tw_timer_handler
  selftests: net: Fix a typo in udpgro_fwd.sh
  selftests/net: udpgso_bench_tx: fix dst ip argument
  net: bridge: mcast: add and enforce startup query interval minimum
  net: bridge: mcast: add and enforce query interval minimum
  ipv6: raw: check passed optlen before reading
  xsk: Initialise xskb free_list_node
  net/mlx5e: Fix wrong features assignment in case of error
  net/mlx5e: TC, Fix memory leak with rules with internal port
  ionic: Initialize the 'lif->dbid_inuse' bitmap
  igc: Fix TX timestamp support for non-MSI-X platforms
  igc: Do not enable crosstimestamping for i225-V models
  net/smc: fix kernel panic caused by race of smc_sock
  net/smc: don't send CDC/LLC message if link not ready
  NFC: st21nfca: Fix memory leak in device probe and remove
  ...

Pull char/misc fixes from Greg KH:
 "Here are two misc driver fixes for 5.16-final:

   - binder accounting fix to resolve reported problem

   - nitro_enclaves fix for mmap assert warning output

  Both of these have been for over a week with no reported issues"

* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
  binder: fix async_free_space accounting for empty parcels

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes for 5.16 to resolve some reported
  problems:

   - mtu3 driver fixes

   - typec ucsi driver fix

   - xhci driver quirk added

   - usb gadget f_fs fix for reported crash

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: ucsi: Only check the contract if there is a connection
  xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
  usb: mtu3: set interval of FS intr and isoc endpoint
  usb: mtu3: fix list_head check warning
  usb: mtu3: add memory barrier before set GPD's HWO
  usb: mtu3: fix interval value for intr and isoc
  usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.