- 05 Jan, 2009 40 commits
-
-
Jan Kara authored
Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Mark Fasheh <mfasheh@suse.com>
-
Jan Kara authored
Signed-off-by:
-
Jan Kara authored
Signed-off-by:
-
Jan Kara authored
Split DQUOT_USR_ENABLED (and DQUOT_GRP_ENABLED) into DQUOT_USR_USAGE_ENABLED and DQUOT_USR_LIMITS_ENABLED. This way we are able to separately enable / disable whether we should: 1) ignore quotas completely 2) just keep uptodate information about usage 3) actually enforce quota limits This is going to be useful when quota is treated as filesystem metadata - we then want to keep quota information uptodate all the time and just enable / disable limits enforcement. Signed-off-by:
-
Jan Kara authored
Upto now, DQUOT_USR_SUSPENDED behaved like a state - i.e., either quota was enabled or suspended or none. Now allowed states are 0, ENABLED, ENABLED | SUSPENDED. This will be useful later when we implement separate enabling of quota usage tracking and limits enforcement because we need to keep track of a state which has been suspended. Signed-off-by:
-
Jan Kara authored
Checks like <= 0 for an unsigned type do not make much sence. The value could be only 0 and that does not happen often enough for the check to be worth it. Signed-off-by:
-
Jan Kara authored
So far quota was fine with quota block limits and inode limits/numbers in a 32-bit type. Now with rapid increase in storage sizes there are coming requests to be able to handle quota limits above 4TB / more that 2^32 inodes. So bump up sizes of types in mem_dqblk structure to 64-bits to be able to handle this. Also update inode allocation / checking functions to use qsize_t and make global structure keep quota limits in bytes so that things are consistent. Signed-off-by:
-
Jan Kara authored
Some filesystems would like to keep private information together with each dquot. Add callbacks alloc_dquot and destroy_dquot allowing filesystem to allocate larger dquots from their private slab in a similar fashion we currently allocate inodes. Signed-off-by:
-
Tao Ma authored
During an xattr set, when we move a xattr which was stored in inode to the outside bucket, we have to delete it and it will use the old value of xis->not_found. xis->not_found is removed by ocfs2_calc_xattr_set_need though, so we must restore it. Signed-off-by:
Tao Ma <tao.ma@oracle.com> Signed-off-by:
-
Tao Ma authored
When we extend one xattr's value to a large size, the old value size might be smaller than the size of a value root. In those cases, we still need to guess the metadata allocation. Reported-by:
Tiger Yang <tiger.yang@oracle.com> Signed-off-by:
-
Mark Fasheh authored
JBD2 is fully backwards compatible with JBD and it's been tested enough with Ocfs2 that we can clean this code up now. Signed-off-by: -
Joel Becker authored
Now that we've centralized the ocfs2_read_virt_blocks() code, let's use it in ocfs2_read_dir_block(). Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Joel Becker authored
The ocfs2_read_dir_block() function really maps an inode's virtual blocks to physical ones before calling ocfs2_read_blocks(). Let's extract that to common code, because other places might want to do that. Other than the block number being virtual, ocfs2_read_virt_blocks() takes the same arguments as ocfs2_read_blocks(). It converts those virtual block numbers to physical before calling ocfs2_read_blocks() directly. If the blocks asked for are discontiguous, this can mean multiple calls to ocfs2_read_blocks(), but this is mostly hidden from the caller. Like ocfs2_read_blocks(), the caller can pass in an existing buffer_head. This is usually done to pick up some readahead I/O. ocfs2_read_virt_blocks() checks the buffer_head's block number against the extent map - it must match. Signed-off-by:
-
Joel Becker authored
Add an optional validation hook to ocfs2_read_blocks(). Now the validation function is only called when a block was actually read off of disk. It is not called when the buffer was in cache. We add a buffer state bit BH_NeedsValidate to flag these buffers. It must always be one higher than the last JBD2 buffer state bit. The dinode, dirblock, extent_block, and xattr_block validators are lifted to this scheme directly. The group_descriptor validator needs to be split into two pieces. The first part only needs the gd buffer and is passed to ocfs2_read_block(). The second part requires the dinode as well, and is called every time. It's only 3 compares, so it's tiny. This also allows us to clean up the non-fatal gd check used by resize.c. It now has no magic argument. Signed-off-by:
-
Joel Becker authored
We weren't consistently checking xattr blocks after we read them. Most places checked the signature, but none checked xb_blkno or xb_fs_signature. Create a toplevel ocfs2_read_xattr_block() that does the read and the validation. Signed-off-by:
-
Joel Becker authored
We have ocfs2_bread() as a vestige of the original ext-based dir code. It's only used by directories, though. Turn it into ocfs2_read_dir_block(), with a prototype matching the other metadata read functions. It's set up to validate dirblocks when the time comes. Signed-off-by:
-
Joel Becker authored
We weren't consistently checking extent blocks after we read them. Most places checked the signature, but none checked h_blkno or h_fs_signature. Create a toplevel ocfs2_read_extent_block() that does the read and the validation. Signed-off-by:
-
Joel Becker authored
Random places in the code would check a group descriptor bh to see if it was valid. The previous commit unified descriptor block reads, validating all block reads in the same place. Thus, these checks are no longer necessary. Rather than eliminate them, however, we change them to BUG_ON() checks. This ensures the assumptions remain true. All of the code paths to these checks have been audited to ensure they come from a validated descriptor read. Signed-off-by:
-
Joel Becker authored
We have a clean call for validating group descriptors, but every place that wants the always does a read_block()+validate() call pair. Create a toplevel ocfs2_read_group_descriptor() that does the right thing. This allows us to leverage the single call point later for fancier handling. We also add validation of gd->bg_generation against the superblock and gd->bg_blkno against the block we thought we read. Signed-off-by:
-
Joel Becker authored
Currently the validation of group descriptors is directly duplicated so that one version can error the filesystem and the other (resize) can just report the problem. Consolidate to one function that takes a boolean. Wrap that function with the old call for the old users. This is in preparation for lifting the read+validate step into a single function. Signed-off-by:
-
Joel Becker authored
Random places in the code would check a dinode bh to see if it was valid. Not only did they do different levels of validation, they handled errors in different ways. The previous commit unified inode block reads, validating all block reads in the same place. Thus, these haphazard checks are no longer necessary. Rather than eliminate them, however, we change them to BUG_ON() checks. This ensures the assumptions remain true. All of the code paths to these checks have been audited to ensure they come from a validated inode read. Signed-off-by:
-
Joel Becker authored
The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by:
-
Tiger Yang authored
This patch adds the Kconfig option "CONFIG_OCFS2_FS_POSIX_ACL" and mount options "acl" to enable acls in Ocfs2. Signed-off-by:
-
Tiger Yang authored
We need to get the parent directories acls and let the new child inherit it. To this, we add additional calculations for data/metadata allocation. Signed-off-by:
-
Tiger Yang authored
This function is used to update acl xattrs during file mode changes. Signed-off-by:
-
Tiger Yang authored
This function is used to enhance permission checking with POSIX ACLs. Signed-off-by:
-
Tiger Yang authored
This patch adds POSIX ACL(access control lists) APIs in ocfs2. We convert struct posix_acl to many ocfs2_acl_entry and regard them as an extended attribute entry. Signed-off-by:
-
Tiger Yang authored
This function does the work of ocfs2_xattr_get under an open lock. Signed-off-by:
-
Tiger Yang authored
Security attributes must be set when creating a new inode. We do this in three steps. - First, get security xattr's name and value by security_operation - Calculate and reserve the meta data and clusters needed by this security xattr before starting transaction - Finally, we set it before add_entry Signed-off-by:
-
Tiger Yang authored
This patch add security xattr set/get/list APIs to support security attributes in Ocfs2. Signed-off-by:
-
Tiger Yang authored
This function is used to set xattr's in a started transaction. It is only called during inode creation inode for initial security/acl xattrs of the new inode. These xattrs could be put into ibody or extent block, so xattr bucket would not be use in this case. Signed-off-by:
-
Tiger Yang authored
Move out inode allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called outside of a transaction. Signed-off-by:
-
Mark Fasheh authored
This patch genericizes the high level handling of extent removal. ocfs2_remove_btree_range() is nearly identical to __ocfs2_remove_inode_range(), except that extent tree operations have been used where necessary. We update ocfs2_remove_inode_range() to use the generic helper. Now extent tree based structures have an easy way to truncate ranges. Signed-off-by:
-
Tao Ma authored
In current ocfs2/xattr, the whole xattr set is divided into many steps are many transaction are used, this make the xattr set process isn't like a real transaction, so this patch try to merge all the transaction into one. Another benefit is that acl can use it easily now. I don't merge the transaction of deleting xattr when we remove an inode. The reason is that if we have a large number of xattrs and every xattrs has large values(large enough for outside storage), the whole transaction will be very huge and it looks like jbd can't handle it(I meet with a jbd complain once). And the old inode removal is also divided into many steps, so I'd like to leave as it is. Note: In xattr set, I try to avoid ocfs2_extend_trans since if the credits aren't enough for the extension, it will commit all the dirty blocks and create a new transaction which may lead to inconsistency in metadata. All ocfs2_extend_trans remained are safe now. Signed-off-by:
-
Tao Ma authored
In ocfs2 xattr set, we reserve metadata and clusters in any place they are needed. It is time-consuming and ineffective, so this patch try to reserve metadata and clusters at the beginning of ocfs2_xattr_set. Signed-off-by:
-
Tao Ma authored
Move clusters free process into dealloc context so that they can be freed after the transaction. Signed-off-by:
-
Tao Ma authored
Now in ocfs2 xattr set, the whole process are divided into many small parts and they are wrapped into diffrent transactions and it make the set doesn't look like a real transaction. So we want to integrate it into a real one. In some cases we will allocate some clusters and free some in just one transaction. e.g, one xattr is larger than inline size, so it and its value root is stored within the inode while the value is outside in a cluster. Then we try to update it with a smaller value(larger than the size of root but smaller than inline size), we may need to free the outside cluster while allocate a new bucket(one cluster) since now the inode may be full. The old solution will lock the global_bitmap(if the local alloc failed in stress test) and then the truncate log. This will cause a ABBA lock with truncate log flush. This patch add the clusters free in dealloc_ctxt, so that we can record the free clusters during the transaction and then free it after we release the global_bitmap in xattr set. Signed-off-by:
-
Tao Ma authored
When the first block of a bucket is filled up with xattr entries, we normally extend the bucket. But if we are just replace one xattr with small length, we don't need to extend it. This is important since we will calculate what we need before the transaction and in this situation no resources will be allocated. Signed-off-by:
-
Tao Ma authored
When we call ocfs2_init_xattr_bucket, we deem that the new buffer head will be written to disk immediately, so we just use sb_getblk. But in some cases the buffer may have already been in ocfs2 uptodate cache, so we only call ocfs2_set_buffer_uptodate if the buffer head isn't in the cache. Signed-off-by:
-
Tao Ma authored
Joel has refactored xattr bucket and make xattr bucket a general wrapper. So in ocfs2_defrag_xattr_bucket, we have already passed the bucket in, so there is no need to allocate a new one and read it. Signed-off-by:
-
