The irq_ack method does not fit our hardware requirements. Edge
interrupts must be cleared before we handle them, and level interrupts
must be cleared after handling them.

We handle the interrupt clearance in our interrupt handler for edge IRQs
and in the unmask method for level IRQs.

Replace the irq_ack method with the no-op method from the dummy irq
chip.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The edge interrupt handling was effectively:

	isr = ISR_reg & enabled;
	if (bank->level_mask)
		level_mask = bank->level_mask & enabled;
	else
		level_mask = 0;

	edge = isr & ~level_mask;

When bank->level_mask is zero, level_mask will be computed as zero
anyway, so the if() statement is redundant.  We are then left with:

	isr = ISR_reg & enabled;
	level_mask = bank->level_mask & enabled;
	edge = isr & ~level_mask;

This can be simplified further to:

	isr = ISR_reg & enabled;
	edge = isr & ~bank->level_mask;

since the second mask with 'enabled' is redundant.

Improve the associated comment as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit c4791bc6 ("gpio: omap: drop omap_gpio_list") removed the
list head and addition to the list head of each gpio bank, but failed
to remove the list_del() call and the node inside struct gpio_bank.
Remove these too.

Fixes: c4791bc6 ("gpio: omap: drop omap_gpio_list")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Commit 384ebe1c ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e89 ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.

This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.

Fixes: 4e962e89 ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation states:

  NOTE: There must be a correlation between the wake-up enable and
  interrupt-enable registers. If a GPIO pin has a wake-up configured
  on it, it must also have the corresponding interrupt enabled (on
  one of the two interrupt lines).

Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt.  This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.

If we do any clearing, clear between the interrupt enable/disable and
trigger setting.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The stmmac driver currently ignores the GPIO flags which are passed via
devicetree because it operates with legacy GPIO numbers instead of GPIO
descriptors. stmmac assumes that the GPIO is "active HIGH" by default.
This can be overwritten by setting "snps,reset-active-low" to make the
reset line "active LOW".

Recent Amlogic SoCs (G12A which includes S905X2 and S905D2 as well as
G12B which includes S922X) use GPIOZ_14 or GPIOZ_15 for the PHY reset
line. These GPIOs are special because they are marked as "3.3V input
tolerant open drain" pins which means they can only drive the pin output
LOW (to reset the PHY) or to switch to input mode (to take the PHY out
of reset).
The GPIO subsystem already supports this with the GPIO_OPEN_DRAIN and
GPIO_OPEN_SOURCE flags in the devicetree bindings.

Add the stmmac PHY reset line specific active low parsing to gpiolib-of
so stmmac can be ported to GPIO descriptors while being backwards
compatible with device trees which use the "old" way of specifying the
polarity.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Keeping the irq_chip definition static shares it with multiple instances
of the altera gpiochip in the system. This is bad and now we get this
warning from gpiolib core:

"detected irqchip that is shared with multiple gpiochips: please fix the
driver."

Hence, move the irq_chip definition from being driver static into the
struct altera_gpio_chips. So a unique irq_chip is used for each gpiochip
instance.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This driver was using the OF GPIO helper API, but barely used any of its
features and it cost more code than it saved. Also, the OF GPIO code is
now deprecated. Convert it to use a more standard setup and use devm
APIs for initialization to avoid the need for a remove function.

Our rationale for this change is that we are using the Xilinx GPIO with
resources injected using the MFD core rather than on the device tree
itself. Using platform rather than OF-specific resources allows this to
work for free.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

FMC has its own GPIO handling, the inclusion of <linux/gpio.h>
is only to reuse some flags that we can just as well provide
using local defines.

Cc: Federico Vaga <federico.vaga@cern.ch>
Cc: Pat Riehecky <riehecky@fnal.gov>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The patch adds k3 am654 compatible, specific properties and
an example.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add new compatible for K3 AM654 SoCs.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add K3 dependencies to enable the driver on K3 platforms.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix the compiler warning with ARM64 config enabled
as the current mask assumes 32 bit by default.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

When a gpio_chip wants to request a descriptor from itself
using gpiochip_request_own_desc() it needs to be able to specify
fully how to use the descriptor, notably line inversion
semantics. The workaround in the gpiolib.c can be removed
and cases (such as SPI CS) where we need at times to request
a GPIO with line inversion semantics directly on a chip for
workarounds, can be fully supported with this call.

Fix up some users of the API that weren't really using the
last flag to set up the line as input or output properly
but instead just calling direction setting explicitly
after requesting the line.

Cc: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

With ReST, [foo]_ means a reference to foo, causing this warning:

    Documentation/driver-api/gpio/driver.rst:419: WARNING: Unknown target name: "devm".

Fix it by using a literal for the name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The TI TCA9539 is a variant of the PCA953x GPIO expander,
with 16 GPIOs and interrupt functionality.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The Freescale SPI chipselects are special: while everyone else
is using "cs-gpios" the Freescale platforms just use "gpios".
Fix this by responding with "gpios" when asking for "cs-gpios"
in a freescale device node, so we hide this pecularity from
the SPI core.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert the Arm PL061 GPIO controller binding to json-schema format.

As I'm the author for all but the gpio-ranges line, make the schema dual
GPL/BSD license.

Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The 'default (active high)' lines are repeated twice. Avoid people stare at
their screens looking for differences.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Use standard functions. Eventually we will be able to drop all
checks and just assign irq_domain_translate_twocell() to this
callback.

Cc: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This fixes up some of my own mistakes when I stressed to refresh
the documentation.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This feature is deprecated, it is helpful to inform users about
this. I'm resisting the temptation to add "depends on BROKEN"
to this, but saving that for later.
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Simplify error checking code by replacing multiple ERR macros with a
call to PTR_ERR_OR_ZERO. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull tracing warning fix from Steven Rostedt:
 "Make the GCC 9 warning for sub struct memset go away.

  GCC 9 now warns about calling memset() on partial structures when it
  goes across multiple fields. This adds a helper for the place in
  tracing that does this type of clearing of a structure"

* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Silence GCC 9 array bounds warning

Pull KVM fixes from Paolo Bonzini:
 "The usual smattering of fixes and tunings that came in too late for
  the merge window, but should not wait four months before they appear
  in a release.

  I also travelled a bit more than usual in the first part of May, which
  didn't help with picking up patches and reports promptly"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
  KVM: x86: fix return value for reserved EFER
  tools/kvm_stat: fix fields filter for child events
  KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
  kvm: selftests: aarch64: compile with warnings on
  kvm: selftests: aarch64: fix default vm mode
  kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
  KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
  KVM: x86/pmu: do not mask the value that is written to fixed PMUs
  KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
  x86/kvm/pmu: Set AMD's virt PMU version to 1
  KVM: x86: do not spam dmesg with VMCS/VMCB dumps
  kvm: Check irqchip mode before assign irqfd
  kvm: svm/avic: fix off-by-one in checking host APIC ID
  KVM: selftests: do not blindly clobber registers in guest asm
  KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
  KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
  KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
  kvm: vmx: Fix -Wmissing-prototypes warnings
  KVM: nVMX: Fix using __this_cpu_read() in preemptible context
  kvm: fix compilation on s390
  ...

Pull /dev/random fix from Ted Ts'o:
 "Fix a soft lockup regression when reading from /dev/random in early
  boot"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: fix soft lockup when trying to read from an uninitialized blocking pool

Fixes: eb9d1bf0: "random: only read from /dev/random after its pool has received 128 bits"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.

Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:

    In function 'memset',
        inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
    ./include/linux/string.h:344:9: warning: '__builtin_memset' offset
    [8505, 8560] from the object at 'iter' is out of the bounds of
    referenced subobject 'seq' with type 'struct trace_seq' at offset
    4368 [-Warray-bounds]
      344 |  return __builtin_memset(p, c, size);
          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.

Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.

Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.comSigned-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull ext4 fixes from Ted Ts'o:
 "Bug fixes (including a regression fix) for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix dcache lookup of !casefolded directories
  ext4: do not delete unlinked inode from orphan list on failed truncate
  ext4: wait for outstanding dio during truncate in nojournal mode
  ext4: don't perform block validity checks on the journal inode

Pull libnvdimm fixes from Dan Williams:

 - Fix a regression that disabled device-mapper dax support

 - Remove unnecessary hardened-user-copy overhead (>30%) for dax
   read(2)/write(2).

 - Fix some compilation warnings.

* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
  dax: Arrange for dax_supported check to span multiple devices
  libnvdimm: Fix compilation warnings with W=1

Pull tracing fixes from Steven Rostedt:
 "Tom Zanussi sent me some small fixes and cleanups to the histogram
  code and I forgot to incorporate them.

  I also added a small clean up patch that was sent to me a while ago
  and I just noticed it"

* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  kernel/trace/trace.h: Remove duplicate header of trace_seq.h
  tracing: Add a check_val() check before updating cond_snapshot() track_val
  tracing: Check keys for variable references in expressions too
  tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts

Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk.  it was introduced in the last iteration of the
case-insensitive patch.

d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.

Fixes: b886ee3e ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull SCSI fixes from James Bottomley:
 "This is the same set of patches sent in the merge window as the final
  pull except that Martin's read only rework is replaced with a simple
  revert of the original change that caused the regression.

  Everything else is an obvious fix or small cleanup"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  Revert "scsi: sd: Keep disk read-only when re-reading partition"
  scsi: bnx2fc: fix incorrect cast to u64 on shift operation
  scsi: smartpqi: Reporting unhandled SCSI errors
  scsi: myrs: Fix uninitialized variable
  scsi: lpfc: Update lpfc version to 12.2.0.2
  scsi: lpfc: add check for loss of ndlp when sending RRQ
  scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
  scsi: lpfc: resolve lockdep warnings
  scsi: qedi: remove set but not used variables 'cdev' and 'udev'
  scsi: qedi: remove memset/memcpy to nfunc and use func instead
  scsi: qla2xxx: Add cleanup for PCI EEH recovery

Pull block fixes from Jens Axboe:

 - NVMe pull request from Keith, with fixes from a few folks.

 - bio and sbitmap before atomic barrier fixes (Andrea)

 - Hang fix for blk-mq freeze and unfreeze (Bob)

 - Single segment count regression fix (Christoph)

 - AoE now has a new maintainer

 - tools/io_uring/ Makefile fix, and sync with liburing (me)

* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
  tools/io_uring: sync with liburing
  tools/io_uring: fix Makefile for pthread library link
  blk-mq: fix hang caused by freeze/unfreeze sequence
  block: remove the bi_seg_{front,back}_size fields in struct bio
  block: remove the segment size check in bio_will_gap
  block: force an unlimited segment size on queues with a virt boundary
  block: don't decrement nr_phys_segments for physically contigous segments
  sbitmap: fix improper use of smp_mb__before_atomic()
  bio: fix improper use of smp_mb__before_atomic()
  aoe: list new maintainer for aoe driver
  nvme-pci: use blk-mq mapping for unmanaged irqs
  nvme: update MAINTAINERS
  nvme: copy MTFA field from identify controller
  nvme: fix memory leak for power latency tolerance
  nvme: release namespace SRCU protection before performing controller ioctls
  nvme: merge nvme_ns_ioctl into nvme_ioctl
  nvme: remove the ifdef around nvme_nvm_ioctl
  nvme: fix srcu locking on error return in nvme_get_ns_from_disk
  nvme: Fix known effects
  nvme-pci: Sync queues on reset
  ...

Merge tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - Two fixes to regressions introduced in kselftest Makefile test run
   output refactoring work (Kees Cook)

 - Adding Atom support to syscall_arg_fault test (Tong Bo)

* tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/timers: Add missing fflush(stdout) calls
  selftests: Remove forced unbuffering for test running
  selftests/x86: Support Atom for syscall_arg_fault test

Pull Devicetree fixes from Rob Herring:

 - Update checkpatch.pl to use DT vendor-prefixes.yaml

 - Fix DT binding references to files converted to DT schema

 - Clean-up Arm CPU binding examples to match schema

 - Add Sifive block versioning scheme documentation

 - Pass binding directory base to validation tools for reference lookups

* tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  checkpatch.pl: Update DT vendor prefix check
  dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml
  dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example
  dt-bindings: arm: Clean up CPU binding examples
  dt: fix refs that were renamed to json with the same file name
  dt-bindings: Pass binding directory to validation tools
  dt-bindings: sifive: describe sifive-blocks versioning

Pule more SPDX updates from Greg KH:
 "Here is another set of reviewed patches that adds SPDX tags to
  different kernel files, based on a set of rules that are being used to
  parse the comments to try to determine that the license of the file is
  "GPL-2.0-or-later".

  Only the "obvious" versions of these matches are included here, a
  number of "non-obvious" variants of text have been found but those
  have been postponed for later review and analysis.

  These patches have been out for review on the linux-spdx@vger mailing
  list, and while they were created by automatic tools, they were
  hand-verified by a bunch of different people, all whom names are on
  the patches are reviewers"

* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
  treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
  ...

The kernel test robot has reported that the use of __this_cpu_add()
causes bug messages like:

  BUG: using __this_cpu_add() in preemptible [00000000] code: ...

Given the imprecise nature of the count and the possibility of resetting
the count and doing the measurement again, this is not really a big
problem to use the unprotected __this_cpu_*() functions.

To make the preemption checking code happy, the this_cpu_*() functions
will be used if CONFIG_DEBUG_PREEMPT is defined.

The imprecise nature of the locking counts are also documented with
the suggestion that we should run the measurement a few times with the
counts reset in between to get a better picture of what is going on
under the hood.

Fixes: a8654596 ("locking/rwsem: Enable lock event counting")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>