TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().

This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:

TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.

TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.

TCA_ACT_FLAGS_REPLACE  replaces 'ovr' in most contexts,
means we are replacing an existing action.

TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.

The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.

I have tested this patch with tdc and I do not see any
failure related to this patch.
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In three places, the driver calls of_get_property and reads the property
length although the length is not used. Update the calls to not request
the length.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrii Nakryiko says:

====================
bpf-next 2021-07-30

We've added 64 non-merge commits during the last 15 day(s) which contain
a total of 83 files changed, 5027 insertions(+), 1808 deletions(-).

The main changes are:

1) BTF-guided binary data dumping libbpf API, from Alan.

2) Internal factoring out of libbpf CO-RE relocation logic, from Alexei.

3) Ambient BPF run context and cgroup storage cleanup, from Andrii.

4) Few small API additions for libbpf 1.0 effort, from Evgeniy and Hengqi.

5) bpf_program__attach_kprobe_opts() fixes in libbpf, from Jiri.

6) bpf_{get,set}sockopt() support in BPF iterators, from Martin.

7) BPF map pinning improvements in libbpf, from Martynas.

8) Improved module BTF support in libbpf and bpftool, from Quentin.

9) Bpftool cleanups and documentation improvements, from Quentin.

10) Libbpf improvements for supporting CO-RE on old kernels, from Shuyi.

11) Increased maximum cgroup storage size, from Stanislav.

12) Small fixes and improvements to BPF tests and samples, from various folks.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
  tools: bpftool: Complete metrics list in "bpftool prog profile" doc
  tools: bpftool: Document and add bash completion for -L, -B options
  selftests/bpf: Update bpftool's consistency script for checking options
  tools: bpftool: Update and synchronise option list in doc and help msg
  tools: bpftool: Complete and synchronise attach or map types
  selftests/bpf: Check consistency between bpftool source, doc, completion
  tools: bpftool: Slightly ease bash completion updates
  unix_bpf: Fix a potential deadlock in unix_dgram_bpf_recvmsg()
  libbpf: Add btf__load_vmlinux_btf/btf__load_module_btf
  tools: bpftool: Support dumping split BTF by id
  libbpf: Add split BTF support for btf__load_from_kernel_by_id()
  tools: Replace btf__get_from_id() with btf__load_from_kernel_by_id()
  tools: Free BTF objects at various locations
  libbpf: Rename btf__get_from_id() as btf__load_from_kernel_by_id()
  libbpf: Rename btf__load() as btf__load_into_kernel()
  libbpf: Return non-null error on failures in libbpf_find_prog_btf_id()
  bpf: Emit better log message if bpf_iter ctx arg btf_id == 0
  tools/resolve_btfids: Emit warnings and patch zero id for missing symbols
  bpf: Increase supported cgroup storage value size
  libbpf: Fix race when pinning maps in parallel
  ...
====================

Link: https://lore.kernel.org/r/20210730225606.1897330-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicting commits, all resolutions pretty trivial:

drivers/bus/mhi/pci_generic.c
  5c2c8531 ("bus: mhi: pci-generic: configurable network interface MRU")
  56f6f4c4 ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean")

drivers/nfc/s3fwrn5/firmware.c
  a0302ff5 ("nfc: s3fwrn5: remove unnecessary label")
  46573e3a ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")
  801e541c ("nfc: s3fwrn5: fix undefined parameter values in dev_err()")

MAINTAINERS
  7d901a1e ("net: phy: add Maxlinear GPY115/21x/24x driver")
  8a7b46fa ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
  (mac80211) and netfilter trees.

  Current release - regressions:

   - mac80211: fix starting aggregation sessions on mesh interfaces

  Current release - new code bugs:

   - sctp: send pmtu probe only if packet loss in Search Complete state

   - bnxt_en: add missing periodic PHC overflow check

   - devlink: fix phys_port_name of virtual port and merge error

   - hns3: change the method of obtaining default ptp cycle

   - can: mcba_usb_start(): add missing urb->transfer_dma initialization

  Previous releases - regressions:

   - set true network header for ECN decapsulation

   - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
     LRO

   - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
     PHY

   - sctp: fix return value check in __sctp_rcv_asconf_lookup

  Previous releases - always broken:

   - bpf:
       - more spectre corner case fixes, introduce a BPF nospec
         instruction for mitigating Spectre v4
       - fix OOB read when printing XDP link fdinfo
       - sockmap: fix cleanup related races

   - mac80211: fix enabling 4-address mode on a sta vif after assoc

   - can:
       - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
       - j1939: j1939_session_deactivate(): clarify lifetime of session
         object, avoid UAF
       - fix number of identical memory leaks in USB drivers

   - tipc:
       - do not blindly write skb_shinfo frags when doing decryption
       - fix sleeping in tipc accept routine"

* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  gve: Update MAINTAINERS list
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
  bpf: Fix leakage due to insufficient speculative store bypass mitigation
  bpf: Introduce BPF nospec instruction for mitigating Spectre v4
  sis900: Fix missing pci_disable_device() in probe and remove
  net: let flow have same hash in two directions
  nfc: nfcsim: fix use after free during module unload
  tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
  sctp: fix return value check in __sctp_rcv_asconf_lookup
  nfc: s3fwrn5: fix undefined parameter values in dev_err()
  net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
  net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
  net/mlx5: Unload device upon firmware fatal error
  net/mlx5e: Fix page allocation failure for ptp-RQ over SF
  net/mlx5e: Fix page allocation failure for trap-RQ over SF
  ...

Pull ACPI fixes from Rafael Wysocki:
 "These revert a recent IRQ resources handling modification that turned
  out to be problematic, fix suspend-to-idle handling on AMD platforms
  to take upcoming systems into account properly and fix the retrieval
  of the DPTF attributes of the PCH FIVR.

  Specifics:

   - Revert recent change of the ACPI IRQ resources handling that
     attempted to improve the ACPI IRQ override selection logic, but
     introduced serious regressions on some systems (Hui Wang).

   - Fix up quirks for AMD platforms in the suspend-to-idle support code
     so as to take upcoming systems using uPEP HID AMDI007 into account
     as appropriate (Mario Limonciello).

   - Fix the code retrieving DPTF attributes of the PCH FIVR so that it
     agrees on the return data type with the ACPI control method
     evaluated for this purpose (Srinivas Pandruvada)"

* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: DPTF: Fix reading of attributes
  Revert "ACPI: resources: Add checks for ACPI IRQ override"
  ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007

Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.

In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already.  Doing
extraneous wakeups will only cause potential thundering herd problems.

However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it".  Even if there was no edge in sight.

Quoting Sandeep Patil:
 "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup
  logic') changed pipe write logic to wakeup readers only if the pipe
  was empty at the time of write. However, there are libraries that
  relied upon the older behavior for notification scheme similar to
  what's described in [1]

  One such library 'realm-core'[2] is used by numerous Android
  applications. The library uses a similar notification mechanism as GNU
  Make but it never drains the pipe until it is full. When Android moved
  to v5.10 kernel, all applications using this library stopped working.

  The library has since been fixed[3] but it will be a while before all
  applications incorporate the updated library"

Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong.  Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.

So add the extraneous wakeup, to approximate the old behavior.

[ I say "approximate", because the exact old behavior was to do a wakeup
  not for each write(), but for each pipe buffer chunk that was filled
  in. The behavior introduced by this change is not that - this is just
  "every write will cause a wakeup, whether necessary or not", which
  seems to be sufficient for the broken library use. ]

It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.

See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".

Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1]
Link: https://github.com/realm/realm-core [2]
Link: https://github.com/realm/realm-core/issues/4666 [3]
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4]
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Quentin Monnet says:

====================

To work with the different program types, map types, attach types etc.
supported by eBPF, bpftool needs occasional updates to learn about the new
features supported by the kernel. When such types translate into new
keyword for the command line, updates are expected in several locations:
typically, the help message displayed from bpftool itself, the manual page,
and the bash completion file should be updated. The options used by the
different commands for bpftool should also remain synchronised at those
locations.

Several omissions have occurred in the past, and a number of types are
still missing today. This set is an attempt to improve the situation. It
brings up-to-date the lists of types or options in bpftool, and also adds a
Python script to the BPF selftests to automatically check that most of
these lists remain synchronised.

v2:
- Reformat some lines in the bash completion file.
- Do not reformat attach types, to preserve git-blame history.
- Do not call Python script from tools/testing/selftests/bpf/Makefile.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Profiling programs with bpftool was extended some time ago to support
two new metrics, namely itlb_misses and dtlb_misses (misses for the
instruction/data translation lookaside buffer). Update the manual page
and bash completion accordingly.

Fixes: 450d060e ("bpftool: Add {i,d}tlb_misses support for bpftool profile")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-8-quentin@isovalent.com

The -L|--use-loader option for using loader programs when loading, or
when generating a skeleton, did not have any documentation or bash
completion. Same thing goes for -B|--base-btf, used to pass a path to a
base BTF object for split BTF such as BTF for kernel modules.

This patch documents and adds bash completion for those options.

Fixes: 75fa1777 ("tools/bpftool: Add bpftool support for split BTF")
Fixes: d510296d ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-7-quentin@isovalent.com

Update the script responsible for checking that the different types used
at various places in bpftool are synchronised, and extend it to check
the consistency of options between the help messages in the source code
and the manual pages.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-6-quentin@isovalent.com

All bpftool commands support the options for JSON output and debug from
libbpf. In addition, some commands support additional options
corresponding to specific use cases.

The list of options described in the man pages for the different
commands are not always accurate. The messages for interactive help are
mostly limited to HELP_SPEC_OPTIONS, and are even less representative of
the actual set of options supported for the commands.

Let's update the lists:

- HELP_SPEC_OPTIONS is modified to contain the "default" options (JSON
  and debug), and to be extensible (no ending curly bracket).
- All commands use HELP_SPEC_OPTIONS in their help message, and then
  complete the list with their specific options.
- The lists of options in the man pages are updated.
- The formatting of the list for bpftool.rst is adjusted to match
  formatting for the other man pages. This is for consistency, and also
  because it will be helpful in a future patch to automatically check
  that the files are synchronised.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-5-quentin@isovalent.com

Update bpftool's list of attach type names to tell it about the latest
attach types, or the "ringbuf" map. Also update the documentation, help
messages, and bash completion when relevant.

These missing items were reported by the newly added Python script used
to help maintain consistency in bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-4-quentin@isovalent.com

Whenever the eBPF subsystem gains new elements, such as new program or
map types, it is necessary to update bpftool if we want it able to
handle the new items.

In addition to the main arrays containing the names of these elements in
the source code, there are also multiple locations to update:

- The help message in the do_help() functions in bpftool's source code.
- The RST documentation files.
- The bash completion file.

This has led to omissions multiple times in the past. This patch
attempts to address this issue by adding consistency checks for all
these different locations. It also verifies that the bpf_prog_type,
bpf_map_type and bpf_attach_type enums from the UAPI BPF header have all
their members present in bpftool.

The script requires no argument to run, it reads and parses the
different files to check, and prints the mismatches, if any. It
currently reports a number of missing elements, which will be fixed in a
later patch:

  $ ./test_bpftool_synctypes.py
  Comparing [...]/linux/tools/bpf/bpftool/map.c (map_type_name) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_MAP_CREATE_TYPES): {'ringbuf'}
  Comparing BPF header (enum bpf_attach_type) and [...]/linux/tools/bpf/bpftool/common.c (attach_type_name): {'BPF_TRACE_ITER', 'BPF_XDP_DEVMAP', 'BPF_XDP', 'BPF_SK_REUSEPORT_SELECT', 'BPF_XDP_CPUMAP', 'BPF_SK_REUSEPORT_SELECT_OR_MIGRATE'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/prog.c (do_help() ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/Documentation/bpftool-prog.rst (ATTACH_TYPE): {'skb_verdict'}
  Comparing [...]/linux/tools/bpf/bpftool/prog.c (attach_type_strings) and [...]/linux/tools/bpf/bpftool/bash-completion/bpftool (BPFTOOL_PROG_ATTACH_TYPES): {'skb_verdict'}

Note that the script does NOT check for consistency between the list of
program types that bpftool claims it accepts and the actual list of
keywords that can be used. This is because bpftool does not "see" them,
they are ELF section names parsed by libbpf. It is not hard to parse the
section_defs[] array in libbpf, but some section names are associated
with program types that bpftool cannot load at the moment. For example,
some programs require a BTF target and an attach target that bpftool
cannot handle. The script may be extended to parse the array and check
only relevant values in the future.

The script is not added to the selftests' Makefile, because doing so
would require all patches with BPF UAPI change to also update bpftool.
Instead it is to be added to the CI.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-3-quentin@isovalent.com

Bash completion for bpftool gets two minor improvements in this patch.

Move the detection of attach types for "bpftool cgroup attach" outside
of the "case/esac" bloc, where we cannot reuse our variable holding the
list of supported attach types as a pattern list. After the change, we
have only one list of cgroup attach types to update when new types are
added, instead of the former two lists.

Also rename the variables holding lists of names for program types, map
types, and attach types, to make them more unique. This can make it
slightly easier to point people to the relevant variables to update, but
the main objective here is to help run a script to check that bash
completion is up-to-date with bpftool's source code.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730215435.7095-2-quentin@isovalent.com

Leon Romanovsky says:

====================
Clean devlink net namespace operations

This short series continues my work on devlink core code to make devlink
reload less prone to errors and harden it from API abuse.

Despite first patch being a clear fix, I would ask you to apply it to
net-next anyway, because the fixed patch is anyway old and it will
help us to eliminate merge conflicts that will arise for following
patches or even for the second one.
====================

Link: https://lore.kernel.org/r/cover.1627578998.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is no need in extra call indirection and check from impossible
flow where someone tries to set namespace without prior call
to devlink_alloc().

Instead of this extra logic and additional EXPORT_SYMBOL, use specialized
devlink allocation function that receives net namespace as an argument.

Such specialized API allows clear view when devlink initialized in wrong
net namespace and/or kernel users don't try to change devlink namespace
under the hood.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.

 * ip netns add n1
 * devlink dev reload pci/0000:00:09.0 netns n1

 ==================================================================
 BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
 Read of size 4 at addr ffff888009d04308 by task devlink/275

 CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x93/0xc2
  print_address_description.constprop.0+0x18/0x140
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  kasan_report.cold+0x7c/0xd8
  ? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
  devlink_nl_param_fill+0x1c8/0xe80
  ? __free_pages_ok+0x37a/0x8a0
  ? devlink_flash_update_timeout_notify+0xd0/0xd0
  ? lock_acquire+0x1a9/0x6d0
  ? fs_reclaim_acquire+0xb7/0x160
  ? lock_is_held_type+0x98/0x110
  ? 0xffffffff81000000
  ? lock_release+0x1f9/0x6c0
  ? fs_reclaim_release+0xa1/0xf0
  ? lock_downgrade+0x6d0/0x6d0
  ? lock_is_held_type+0x98/0x110
  ? lock_is_held_type+0x98/0x110
  ? memset+0x20/0x40
  ? __build_skb_around+0x1f8/0x2b0
  devlink_param_notify+0x6d/0x180
  devlink_reload+0x1c3/0x520
  ? devlink_remote_reload_actions_performed+0x30/0x30
  ? mutex_trylock+0x24b/0x2d0
  ? devlink_nl_cmd_reload+0x62b/0x1070
  devlink_nl_cmd_reload+0x66d/0x1070
  ? devlink_reload+0x520/0x520
  ? devlink_get_from_attrs+0x1bc/0x260
  ? devlink_nl_pre_doit+0x64/0x4d0
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  ? mutex_lock_io_nested+0x1130/0x1130
  ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
  ? security_capable+0x51/0x90
  genl_rcv_msg+0x27f/0x4a0
  ? genl_get_cmd+0x3c0/0x3c0
  ? lock_acquire+0x1a9/0x6d0
  ? devlink_reload+0x520/0x520
  ? lock_release+0x6c0/0x6c0
  netlink_rcv_skb+0x11d/0x340
  ? genl_get_cmd+0x3c0/0x3c0
  ? netlink_ack+0x9f0/0x9f0
  ? lock_release+0x1f9/0x6c0
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  ? netlink_attachskb+0x730/0x730
  ? _copy_from_iter_full+0x178/0x650
  ? __alloc_skb+0x113/0x2b0
  netlink_sendmsg+0x6f1/0xbd0
  ? netlink_unicast+0x700/0x700
  ? lock_is_held_type+0x98/0x110
  ? netlink_unicast+0x700/0x700
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  ? __x64_sys_getpeername+0xb0/0xb0
  ? do_sys_openat2+0x10b/0x370
  ? __up_read+0x1a1/0x7b0
  ? do_user_addr_fault+0x219/0xdc0
  ? __x64_sys_openat+0x120/0x1d0
  ? __x64_sys_open+0x1a0/0x1a0
  __x64_sys_sendto+0xdd/0x1b0
  ? syscall_enter_from_user_mode+0x1d/0x50
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7fc69d0af14a
 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
 RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
 RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
 RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

 Allocated by task 146:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x99/0xc0
  mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
  mlx5_load+0xd2/0x180 [mlx5_core]
  mlx5_init_one+0x2f6/0x450 [mlx5_core]
  probe_one+0x47d/0x6e0 [mlx5_core]
  pci_device_probe+0x2a0/0x4a0
  really_probe+0x20a/0xc90
  driver_probe_device+0xd8/0x380
  device_driver_attach+0x1df/0x250
  __driver_attach+0xff/0x240
  bus_for_each_dev+0x11e/0x1a0
  bus_add_driver+0x309/0x570
  driver_register+0x1ee/0x380
  0xffffffffa06b8062
  do_one_initcall+0xd5/0x410
  do_init_module+0x1c8/0x760
  load_module+0x6d8b/0x9650
  __do_sys_finit_module+0x118/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 Freed by task 275:
  kasan_save_stack+0x1b/0x40
  kasan_set_track+0x1c/0x30
  kasan_set_free_info+0x20/0x30
  __kasan_slab_free+0x102/0x140
  slab_free_freelist_hook+0x74/0x1b0
  kfree+0xd7/0x2a0
  mlx5_unload+0x16/0xb0 [mlx5_core]
  mlx5_unload_one+0xae/0x120 [mlx5_core]
  mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
  devlink_reload+0x141/0x520
  devlink_nl_cmd_reload+0x66d/0x1070
  genl_family_rcv_msg_doit+0x1e9/0x2f0
  genl_rcv_msg+0x27f/0x4a0
  netlink_rcv_skb+0x11d/0x340
  genl_rcv+0x24/0x40
  netlink_unicast+0x433/0x700
  netlink_sendmsg+0x6f1/0xbd0
  sock_sendmsg+0xb0/0xe0
  __sys_sendto+0x193/0x240
  __x64_sys_sendto+0xdd/0x1b0
  do_syscall_64+0x2d/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xae

 The buggy address belongs to the object at ffff888009d04300
  which belongs to the cache kmalloc-128 of size 128
 The buggy address is located 8 bytes inside of
  128-byte region [ffff888009d04300, ffff888009d04380)
 The buggy address belongs to the page:
 page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
 head:0000000086a64ecc order:1 compound_mapcount:0
 flags: 0x4000000000010200(slab|head)
 raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
 raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                       ^
  ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ==================================================================

The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.

Fixes: 070c63f2 ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As Eric noticed, __unix_dgram_recvmsg() may acquire u->iolock
too, so we have to release it before calling this function.

Fixes: 9825d866 ("af_unix: Implement unix_dgram_bpf_recvmsg()")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>

Add two new APIs: btf__load_vmlinux_btf and btf__load_module_btf.
btf__load_vmlinux_btf is just an alias to the existing API named
libbpf_find_kernel_btf, rename to be more precisely and consistent
with existing BTF APIs. btf__load_module_btf can be used to load
module BTF, add it for completeness. These two APIs are useful for
implementing tracing tools and introspection tools. This is part
of the effort towards libbpf 1.0 ([0]).

  [0] Closes: https://github.com/libbpf/libbpf/issues/280Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210730114012.494408-1-hengqi.chen@gmail.com

If skb_dst_set_noref() is invoked with a NULL dst, the 'slow_gro'
field is cleared, too. That could lead to wrong behavior if
the skb later enters the GRO stage.

Fix the potential issue replacing preserving a non-zero value of
the 'slow_gro' field.

Additionally, fix a comment typo.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 8a886b14 ("sk_buff: track dst status in slow_gro")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/aa42529252dc8bb02bd42e8629427040d1058537.1627662501.git.pabeni@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

* acpi-resources:
  Revert "ACPI: resources: Add checks for ACPI IRQ override"

* acpi-dptf:
  ACPI: DPTF: Fix reading of attributes

Pull block fixes from Jens Axboe:

 - gendisk freeing fix (Christoph)

 - blk-iocost wake ordering fix (Tejun)

 - tag allocation error handling fix (John)

 - loop locking fix. While this isn't the prettiest fix in the world,
   nobody has any good alternatives for 5.14. Something to likely
   revisit for 5.15. (Tetsuo)

* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  block: delay freeing the gendisk
  blk-iocost: fix operation ordering in iocg_wake_fn()
  blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
  loop: reintroduce global lock for safe loop_validate_file() traversal

Pull io_uring fixes from Jens Axboe:

 - A fix for block backed reissue (me)

 - Reissue context hardening (me)

 - Async link locking fix (Pavel)

* tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  io_uring: fix poll requests leaking second poll entries
  io_uring: don't block level reissue off completion path
  io_uring: always reissue from task_work context
  io_uring: fix race in unified task_work running
  io_uring: fix io_prep_async_link locking

Pull libata fixlets from Jens Axboe:

 - A fix for PIO highmem (Christoph)

 - Kill HAVE_IDE as it's now unused (Lukas)

* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
  arch: Kconfig: clean up obsolete use of HAVE_IDE
  libata: fix ata_pio_sector for CONFIG_HIGHMEM

Pull btrfs fixes from David Sterba:

 - fix -Warray-bounds warning, to help external patchset to make it
   default treewide

 - fix writeable device accounting (syzbot report)

 - fix fsync and log replay after a rename and inode eviction

 - fix potentially lost error code when submitting multiple bios for
   compressed range

* tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: calculate number of eb pages properly in csum_tree_block
  btrfs: fix rw device counting in __btrfs_free_extra_devids
  btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
  btrfs: mark compressed range uptodate only if all bio succeed

Pull HID fixes from Jiri Kosina:

 - resume timing fix for intel-ish driver (Ye Xiang)

 - fix for using incorrect MMIO register in amd_sfh driver (Dylan
   MacKenzie)

 - Cintiq 24HDT / 27QHDT regression fix and touch processing fix for
   Wacom driver (Jason Gerecke)

 - device removal bugfix for ft260 driver (Michael Zaidman)

 - other small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: ft260: fix device removal due to USB disconnect
  HID: wacom: Skip processing of touches with negative slot values
  HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT
  HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"
  HID: apple: Add support for Keychron K1 wireless keyboard
  HID: fix typo in Kconfig
  HID: ft260: fix format type warning in ft260_word_show()
  HID: amd_sfh: Use correct MMIO register for DMA address
  HID: asus: Remove check for same LED brightness on set
  HID: intel-ish-hid: use async resume function

Merge misc fixes from Andrew Morton:
 "7 patches.

  Subsystems affected by this patch series: lib, ocfs2, and mm (slub,
  migration, and memcg)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
  slub: fix unreclaimable slab stat for bulk free
  mm/migrate: fix NR_ISOLATED corruption on 64-bit
  mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
  ocfs2: issue zeroout to EOF blocks
  ocfs2: fix zero out valid data
  lib/test_string.c: move string selftest in the Runtime Testing menu

Merge tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-07-30

The first patch is by me and adds Yasushi SHOJI as a reviewer for the
Microchip CAN BUS Analyzer Tool driver.

Dan Carpenter's patch fixes a signedness bug in the hi311x driver.

Pavel Skripkin provides 4 patches, the first targets the mcba_usb
driver by adding the missing urb->transfer_dma initialization, which
was broken in a previous commit. The last 3 patches fix a memory leak
in the usb_8dev, ems_usb and esd_usb2 driver.

* tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  can: esd_usb2: fix memory leak
  can: ems_usb: fix memory leak
  can: usb_8dev: fix memory leak
  can: mcba_usb_start(): add missing urb->transfer_dma initialization
  can: hi311x: fix a signedness bug in hi3110_cmd()
  MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
====================

Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When I use kfree_rcu() to free a large memory allocated by kmalloc_node(),
the following dump occurs.

  BUG: kernel NULL pointer dereference, address: 0000000000000020
  [...]
  Oops: 0000 [#1] SMP
  [...]
  Workqueue: events kfree_rcu_work
  RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline]
  RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline]
  RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363
  [...]
  Call Trace:
    kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293
    kfree_bulk include/linux/slab.h:413 [inline]
    kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300
    process_one_work+0x207/0x530 kernel/workqueue.c:2276
    worker_thread+0x320/0x610 kernel/workqueue.c:2422
    kthread+0x13d/0x160 kernel/kthread.c:313
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

When kmalloc_node() a large memory, page is allocated, not slab, so when
freeing memory via kfree_rcu(), this large memory should not be used by
memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for
slab.

Using page_objcgs_check() instead of page_objcgs() in
memcg_slab_free_hook() to fix this bug.

Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com
Fixes: 270c6a71 ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB uses page allocator for higher order allocations and update
unreclaimable slab stat for such allocations.  At the moment, the bulk
free for SLUB does not share code with normal free code path for these
type of allocations and have missed the stat update.  So, fix the stat
update by common code.  The user visible impact of the bug is the
potential of inconsistent unreclaimable slab stat visible through
meminfo and vmstat.

Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com
Fixes: 6a486c0a ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similar to commit 2da9f630 ("mm/vmscan: fix NR_ISOLATED_FILE
corruption on 64-bit") avoid using unsigned int for nr_pages.  With
unsigned int type the large unsigned int converts to a large positive
signed long.

Symptoms include CMA allocations hanging forever due to
alloc_contig_range->...->isolate_migratepages_block waiting forever in
"while (unlikely(too_many_isolated(pgdat)))".

Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com
Fixes: c5fc5c3a ("mm: migrate: account THP NUMA migration counters correctly")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Dan Carpenter reports:

    The patch 2d146aa3: "mm: memcontrol: switch to rstat" from Apr
    29, 2021, leads to the following static checker warning:

	    kernel/cgroup/rstat.c:200 cgroup_rstat_flush()
	    warn: sleeping in atomic context

    mm/memcontrol.c
      3572  static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
      3573  {
      3574          unsigned long val;
      3575
      3576          if (mem_cgroup_is_root(memcg)) {
      3577                  cgroup_rstat_flush(memcg->css.cgroup);
			    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    This is from static analysis and potentially a false positive.  The
    problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold()
    which holds an rcu_read_lock().  And the cgroup_rstat_flush() function
    can sleep.

      3578                  val = memcg_page_state(memcg, NR_FILE_PAGES) +
      3579                          memcg_page_state(memcg, NR_ANON_MAPPED);
      3580                  if (swap)
      3581                          val += memcg_page_state(memcg, MEMCG_SWAP);
      3582          } else {
      3583                  if (!swap)
      3584                          val = page_counter_read(&memcg->memory);
      3585                  else
      3586                          val = page_counter_read(&memcg->memsw);
      3587          }
      3588          return val;
      3589  }

__mem_cgroup_threshold() indeed holds the rcu lock.  In addition, the
thresholding code is invoked during stat changes, and those contexts
have irqs disabled as well.  If the lock breaking occurs inside the
flush function, it will result in a sleep from an atomic context.

Use the irqsafe flushing variant in mem_cgroup_usage() to fix this.

Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org
Fixes: 2d146aa3 ("mm: memcontrol: switch to rstat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster.  But since ->writepage will ignore EOF
pages, those zeros will not be flushed.

This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't.  The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.

When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again.  That made
writeback ignore them forever.  That will cause data corruption.  Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.

To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more.  The fix is to avoid zero EOF blocks with buffer
write.

The following code snippet from qemu-img could trigger the corruption.

  656   open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
  ...
  660   fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...>
  660   fallocate(11, 0, 2275868672, 327680) = 0
  658   pwrite64(11, "

Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.

Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes: 6bba4471 ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

STRING_SELFTEST is presented in the "Library routines" menu.  Move it in
Kernel hacking > Kernel Testing and Coverage > Runtime Testing together
with other similar tests found in lib/

	--- Runtime Testing
	<*>   Test functions located in the hexdump module at runtime
	<*>   Test string functions (NEW)
	<*>   Test functions located in the string_helpers module at runtime
	<*>   Test strscpy*() family of functions at runtime
	<*>   Test kstrto*() family of functions at runtime
	<*>   Test printf() family of functions at runtime
	<*>   Test scanf() family of functions at runtime

Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.comSigned-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The team maintaining the gve driver has undergone some changes,
this updates the MAINTAINERS file accordingly.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

lockdep_genl_is_held() and its caller arm not used now, just remove them.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210729074854.8968-1-yajun.deng@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Krzysztof Kozlowski says:

====================
nfc: constify pointed data - missed part

This was previously sent [1] but got lost. It was a prerequisite to part two of NFC const [2].

Changes since v2:
1. Drop patch previously 7/8 which cases new warnings "warning: Using
   plain integer as NULL pointer".

Changes since v1:
1. Add patch 1/8 fixing up nfcmrvl_spi_parse_dt()

[1] https://lore.kernel.org/lkml/20210726145224.146006-1-krzysztof.kozlowski@canonical.com/
[2] https://lore.kernel.org/linux-nfc/20210729104022.47761-1-krzysztof.kozlowski@canonical.com/T/#m199fbdde180fa005a10addf28479fcbdc6263eab
====================

Link: https://lore.kernel.org/r/20210730144202.255890-1-krzysztof.kozlowski@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No need for multiple spaces in variable declaration (the code does not
use them in other places).  No functional change.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>