Instead of having the logic that does trace_pid_list open coded, wrap it in
abstract functions. This will allow a rewrite of the logic that implements
the trace_pid_list without affecting the users.

Note, this causes a change in behavior. Every time a pid is written into
the set_*_pid file, it creates a new list and uses RCU to update it. If
pid_max is lowered, but there was a pid currently in the list that was
higher than pid_max, those pids will now be removed on updating the list.
The old behavior kept that from happening.

The rewrite of the pid_list logic will no longer depend on pid_max,
and will return the old behavior.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In x86, the fake return address on the stack saved by
__kretprobe_trampoline() will be replaced with the real return
address after returning from trampoline_handler(). Before fixing
the return address, the real return address can be found in the
'current->kretprobe_instances'.

However, since there is a window between updating the
'current->kretprobe_instances' and fixing the address on the stack,
if an interrupt happens at that timing and the interrupt handler
does stacktrace, it may fail to unwind because it can not get
the correct return address from 'current->kretprobe_instances'.

This will eliminate that window by fixing the return address
right before updating 'current->kretprobe_instances'.

Link: https://lkml.kernel.org/r/163163057094.489837.9044470370440745866.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ftrace shows "[unknown/kretprobe'd]" indicator all addresses in the
kretprobe_trampoline, but the modified address by kretprobe should
be only kretprobe_trampoline+0.

Link: https://lkml.kernel.org/r/163163056044.489837.794883849706638013.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since the kretprobe replaces the function return address with
the kretprobe_trampoline on the stack, x86 unwinders can not
continue the stack unwinding at that point, or record
kretprobe_trampoline instead of correct return address.

To fix this issue, find the correct return address from task's
kretprobe_instances as like as function-graph tracer does.

With this fix, the unwinder can correctly unwind the stack
from kretprobe event on x86, as below.

           <...>-135     [003] ...1     6.722338: r_full_proxy_read_0: (vfs_read+0xab/0x1a0 <- full_proxy_read)
           <...>-135     [003] ...1     6.722377: <stack trace>
 => kretprobe_trace_func+0x209/0x2f0
 => kretprobe_dispatcher+0x4a/0x70
 => __kretprobe_trampoline_handler+0xca/0x150
 => trampoline_handler+0x44/0x70
 => kretprobe_trampoline+0x2a/0x50
 => vfs_read+0xab/0x1a0
 => ksys_read+0x5f/0xe0
 => do_syscall_64+0x33/0x40
 => entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lkml.kernel.org/r/163163055130.489837.5161749078833497255.stgit@devnote2Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Change __kretprobe_trampoline() to push the address of the
__kretprobe_trampoline() as a fake return address at the bottom
of the stack frame. This fake return address will be replaced
with the correct return address in the trampoline_handler().

With this change, the ORC unwinder can check whether the return
address is modified by kretprobes or not.

Link: https://lkml.kernel.org/r/163163054185.489837.14338744048957727386.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since the ORC unwinder from pt_regs requires setting up regs->ip
correctly, set the correct return address to the regs->ip before
calling user kretprobe handler.

This allows the kretrprobe handler to trace stack from the
kretprobe's pt_regs by stack_trace_save_regs() (eBPF will do
this), instead of stack tracing from the handler context by
stack_trace_save() (ftrace will do this).

Link: https://lkml.kernel.org/r/163163053237.489837.4272653874525136832.stgit@devnote2Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since arm's __kretprobe_trampoline() saves partial 'pt_regs' on the
stack, 'regs->ARM_pc' (instruction pointer) is not accessible from
the kretprobe handler. This means if instruction_pointer_set() is
used from kretprobe handler, it will break the data on the stack.

Make space for instruction pointer (ARM_pc) on the stack in the
__kretprobe_trampoline() for fixing this problem.

Link: https://lkml.kernel.org/r/163163052262.489837.10327621053231461255.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add instruction_pointer_set() API for ia64.

Link: https://lkml.kernel.org/r/163163051195.489837.1039597819838213481.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add instruction_pointer_set() API for arc.

Link: https://lkml.kernel.org/r/163163050148.489837.15187799269793560256.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add UNWIND_HINT_FUNC on __kretprobe_trampoline() code so that ORC
information is generated on the __kretprobe_trampoline() correctly.
Also, this uses STACK_FRAME_NON_STANDARD_FP(), CONFIG_FRAME_POINTER-
-specific version of STACK_FRAME_NON_STANDARD().

Link: https://lkml.kernel.org/r/163163049242.489837.11970969750993364293.stgit@devnote2Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

If a function is ignored, also ignore its hints.  This is useful for the
case where the function ignore is conditional on frame pointers, e.g.
STACK_FRAME_NON_STANDARD_FP().

Link: https://lkml.kernel.org/r/163163048317.489837.10988954983369863209.stgit@devnote2Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a CONFIG_FRAME_POINTER-specific version of
STACK_FRAME_NON_STANDARD() for the case where a function is
intentionally missing frame pointer setup, but otherwise needs
objtool/ORC coverage when frame pointers are disabled.

Link: https://lkml.kernel.org/r/163163047364.489837.17377799909553689661.stgit@devnote2Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Introduce kretprobe_find_ret_addr() and is_kretprobe_trampoline().
These APIs will be used by the ORC stack unwinder and ftrace, so that
they can check whether the given address points kretprobe trampoline
code and query the correct return address in that case.

Link: https://lkml.kernel.org/r/163163046461.489837.1044778356430293962.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since now there is kretprobe_trampoline_addr() for referring the
address of kretprobe trampoline code, we don't need to access
kretprobe_trampoline directly.

Make it harder to refer by renaming it to __kretprobe_trampoline().

Link: https://lkml.kernel.org/r/163163045446.489837.14510577516938803097.stgit@devnote2Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The __kretprobe_trampoline_handler() callback, called from low level
arch kprobes methods, has the 'trampoline_address' parameter, which is
entirely superfluous as it basically just replicates:

  dereference_kernel_function_descriptor(kretprobe_trampoline)

In fact we had bugs in arch code where it wasn't replicated correctly.

So remove this superfluous parameter and use kretprobe_trampoline_addr()
instead.

Link: https://lkml.kernel.org/r/163163044546.489837.13505751885476015002.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function:

  3d7e3382: ("jprobes: make jprobes a little safer for users")

But this is just open-coded dereference_symbol_descriptor() in essence, and
its obscure nature was causing bugs.

Just use the real thing and remove arch_deref_entry_point().

Link: https://lkml.kernel.org/r/163163043630.489837.7924988885652708696.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The following commit:

   Commit e792ff80 ("ia64: kprobes: Use generic kretprobe trampoline handler")

Passed the wrong trampoline address to __kretprobe_trampoline_handler(): it
passes the descriptor address instead of function entry address.

Pass the right parameter.

Also use correct symbol dereference function to get the function address
from 'kretprobe_trampoline' - an IA64 special.

Link: https://lkml.kernel.org/r/163163042696.489837.12551102356265354730.stgit@devnote2

Fixes: e792ff80 ("ia64: kprobes: Use generic kretprobe trampoline handler")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: X86 ML <x86@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use the 'bool' type instead of 'int' for the functions which
returns a boolean value, because this makes clear that those
functions don't return any error code.

Link: https://lkml.kernel.org/r/163163041649.489837.17311187321419747536.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since get_optimized_kprobe() is only used inside kprobes,
it doesn't need to use 'unsigned long' type for 'addr' parameter.
Make it use 'kprobe_opcode_t *' for the 'addr' parameter and
subsequent call of arch_within_optimized_kprobe() also should use
'kprobe_opcode_t *'.

Note that MAX_OPTIMIZED_LENGTH and RELATIVEJUMP_SIZE are defined
by byte-size, but the size of 'kprobe_opcode_t' depends on the
architecture. Therefore, we must be careful when calculating
addresses using those macros.

Link: https://lkml.kernel.org/r/163163040680.489837.12133032364499833736.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add assertions for required locks instead of comment it
so that the lockdep can inspect locks automatically.

Link: https://lkml.kernel.org/r/163163039572.489837.18011973177537476885.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use IS_ENABLED(CONFIG_KPROBES) instead of kprobes_built_in().
This inline function is introduced only for avoiding #ifdef.
But since now we have IS_ENABLED(), it is no longer needed.

Link: https://lkml.kernel.org/r/163163038581.489837.2805250706507372658.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix coding style issues reported by checkpatch.pl and update
comments to quote variable names and add "()" to function
name.
One TODO comment in __disarm_kprobe() is removed because
it has been done by following commit.

Link: https://lkml.kernel.org/r/163163037468.489837.4282347782492003960.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

This clean up the error/notification messages in kprobes related code.
Basically this defines 'pr_fmt()' macros for each files and update
the messages which describes

 - what happened,
 - what is the kernel going to do or not do,
 - is the kernel fine,
 - what can the user do about it.

Also, if the message is not needed (e.g. the function returns unique
error code, or other error message is already shown.) remove it,
and replace the message with WARN_*() macros if suitable.

Link: https://lkml.kernel.org/r/163163036568.489837.14085396178727185469.stgit@devnote2Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

arch_check_ftrace_location() was introduced as a weak function in
commit f7f242ff ("kprobes: introduce weak
arch_check_ftrace_location() helper function") to allow architectures
to handle kprobes call site on their own.

Recently, the only architecture (csky) to implement
arch_check_ftrace_location() was migrated to using the common
version.

As a result, further cleanup the code to drop the weak attribute and
rename the function to remove the architecture specific
implementation.

Link: https://lkml.kernel.org/r/163163035673.489837.2367816318195254104.stgit@devnote2Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The csky specific arch_check_ftrace_location() shadows a weak
implementation of the function in core code that offers the same
functionality but with additional error checking.

Drop the architecture specific function as a step towards further
cleanup in core code.

Link: https://lkml.kernel.org/r/163163034617.489837.7789033031868135258.stgit@devnote2Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The function prepare_kprobe() is called during kprobe registration and
is responsible for ensuring any architecture related preparation for
the kprobe is done before returning.

One of two versions of prepare_kprobe() is chosen depending on the
availability of KPROBE_ON_FTRACE in the kernel configuration.

Simplify the code by dropping the version when KPROBE_ON_FTRACE is not
selected - instead relying on kprobe_ftrace() to return false when
KPROBE_ON_FTRACE is not set.

No functional change.

Link: https://lkml.kernel.org/r/163163033696.489837.9264661820279300788.stgit@devnote2Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The "enabled" file provides a debugfs interface to arm / disarm
kprobes in the kernel. In order to parse the buffer containing the
values written from userspace, the callback manually parses the user
input to convert it to a boolean value.

As taking a string value from userspace and converting it to boolean
is a common operation, a helper kstrtobool_from_user() is already
available in the kernel. Update the callback to use the common helper
to parse the write buffer from userspace.

Link: https://lkml.kernel.org/r/163163032637.489837.10678039554832855327.stgit@devnote2Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

debugfs_create_file() takes a pointer argument that can be used during
file operation callbacks (accessible via i_private in the inode
structure). An obvious requirement is for the pointer to refer to
valid memory when used.

When creating the debugfs file to dynamically enable / disable
kprobes, a pointer to local variable is passed to
debugfs_create_file(); which will go out of scope when the init
function returns. The reason this hasn't triggered random memory
corruption is because the pointer is not accessed during the debugfs
file callbacks.

Since the enabled state is managed by the kprobes_all_disabled global
variable, the local variable is not needed. Fix the incorrect (and
unnecessary) usage of local variable during debugfs_file_create() by
passing NULL instead.

Link: https://lkml.kernel.org/r/163163031686.489837.4476867635937014973.stgit@devnote2

Fixes: bf8f6e5b ("Kprobes: The ON/OFF knob thru debugfs")
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode

Pull thermal fixes from Daniel Lezcano:

 - Fix thermal shutdown after a suspend/resume due to a wrong TCC value
   restored on Intel platform (Antoine Tenart)

 - Fix potential buffer overflow when building the list of policies. The
   buffer size is not updated after writing to it (Dan Carpenter)

 - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)

* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
  thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
  thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Prevent sending the wrong signal when protection keys are enabled
     and the kernel handles a fault in the vsyscall emulation.

   - Invoke early_reserve_memory() before invoking e820_memory_setup()
     which is required to make the Xen dom0 e820 hooks work correctly.

   - Use the correct data type for the SETZ operand in the EMQCMDS
     instruction wrapper.

   - Prevent undefined behaviour to the potential unaligned accesss in
     the instruction decoder library"

* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
  x86/asm: Fix SETZ size enqcmds() build failure
  x86/setup: Call early_reserve_memory() earlier
  x86/fault: Fix wrong signal when vsyscall fails with pkey

Pull timer fix from Thomas Gleixner:
 "A single fix for the recently introduced regression in posix CPU
  timers which failed to stop the timer when requested. That caused
  unexpected signals to be sent to the process/thread causing
  malfunction"

* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Prevent spuriously armed 0-value itimer

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Work around a bad GIC integration on a Renesas platform which can't
     handle byte-sized MMIO access

   - Plug a potential memory leak in the GICv4 driver

   - Fix a regression in the Armada 370-XP IPI code which was caused by
     issuing EOI instack of ACK.

   - A couple of small fixes here and there"

* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Work around broken Renesas integration
  irqchip/renesas-rza1: Use semicolons instead of commas
  irqchip/gic-v3-its: Fix potential VPE leak on error
  irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
  irqchip/mbigen: Repair non-kernel-doc notation
  irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
  irqchip/armada-370-xp: Fix ack/eoi breakage
  Documentation: Fix irq-domain.rst build warning

Merge misc fixes from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
  lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
  debug, and pagemap)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix uninitialized use in overcommit_policy_handler
  mm/memory_failure: fix the missing pte_unmap() call
  kasan: always respect CONFIG_KASAN_STACK
  sh: pgtable-3level: fix cast to pointer from integer of different size
  mm/debug: sync up latest migrate_reason to migrate_reason_names
  mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
  mm: fs: invalidate bh_lrus for only cold path
  lib/zlib_inflate/inffast: check config in C to avoid unused function warning
  tools/vm/page-types: remove dependency on opt_file for idle page tracking
  scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
  ocfs2: drop acl cache for directories too
  mm/shmem.c: fix judgment error in shmem_is_huge()
  xtensa: increase size of gcc stack frame check
  mm/damon: don't use strnlen() with known-bogus source length
  kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
  mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

Pull io_uring fixes from Jens Axboe:
 "This one looks a bit bigger than it is, but that's mainly because 2/3
  of it is enabling IORING_OP_CLOSE to close direct file descriptors.

  We've had a few folks using them and finding it confusing that the way
  to close them is through using -1 for file update, this just brings
  API symmetry for direct descriptors. Hence I think we should just do
  this now and have a better API for 5.15 release. There's some room for
  de-duplicating the close code, but we're leaving that for the next
  merge window.

  Outside of that, just small fixes:

   - Poll race fixes (Hao)

   - io-wq core dump exit fix (me)

   - Reschedule around potentially intensive tctx and buffer iterators
     on teardown (me)

   - Fix for always ending up punting files update to io-wq (me)

   - Put the provided buffer meta data under memcg accounting (me)

   - Tweak for io_write(), removing dead code that was added with the
     iterator changes in this release (Pavel)"

* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  io_uring: make OP_CLOSE consistent with direct open
  io_uring: kill extra checks in io_write()
  io_uring: don't punt files update to io-wq unconditionally
  io_uring: put provided buffer meta data under memcg accounting
  io_uring: allow conditional reschedule for intensive iterators
  io_uring: fix potential req refcount underflow
  io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
  io_uring: fix race between poll completion and cancel_hash insertion
  io-wq: ensure we exit if thread group is exiting

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - keep ctrl->namespaces ordered (Christoph Hellwig)
      - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
        Grimberg)
      - handled updated hw_queues in nvme-fc more carefully (Daniel
        Wagner, James Smart)

 - md lock order fix (Christoph)

 - fallocate locking fix (Ming)

 - blktrace UAF fix (Zhihao)

 - rq-qos bio tracking fix (Ming)

* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  block: hold ->invalidate_lock in blkdev_fallocate
  blktrace: Fix uaf in blk_trace access after removing by sysfs
  block: don't call rq_qos_ops->done_bio if the bio isn't tracked
  md: fix a lock order reversal in md_alloc
  nvme: keep ctrl->namespaces ordered
  nvme-tcp: fix incorrect h2cdata pdu offset accounting
  nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
  nvme-fc: avoid race between time out and tear down
  nvme-fc: update hardware queues before using them

Pull xen fixes from Juergen Gross:
 "Some minor cleanups and fixes of some theoretical bugs, as well as a
  fix of a bug introduced in 5.15-rc1"

* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: fix PV trap handling on secondary processors
  xen/balloon: fix balloon kthread freezing
  swiotlb-xen: this is PV-only on x86
  xen/pci-swiotlb: reduce visibility of symbols
  PCI: only build xen-pcifront in PV-enabled environments
  swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
  Xen/gntdev: don't ignore kernel unmapping error
  xen/x86: drop redundant zeroing from cpu_initialize_context()