- 16 Oct, 2021 26 commits
-
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use an array on the stack, then call eth_hw_addr_set(). eth_hw_addr_set() is after error checking, this should be fine, error propagates all the way to failing probe. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address apart into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. macaddr[] is a module param, and int, so copy the address into an array of u8 on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jean Sacren authored
The last argument of device_create() call should be a template string. The tap_name variable should be the argument to the string, but not the argument of the call itself. We should add the template string and turn tap_name into its argument. Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Signed-off-by:
-
Jean Sacren authored
The last argument of device_create() call should be a template string. The tap_name variable should be the argument to the string, but not the argument of the call itself. We should add the template string and turn tap_name into its argument. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-updates-2021-10-15 1) From Rongwei Liu: Use system_image_guid and native_port_num when bonding. Don't relay on PCIe ids anymore. With some specific NIC, the physical devices may have PCIe IDs like 0001:01:00.0/1 and 0002:02:00.0/1. All of these devices should have the same system_image_guid and device index can be queried from native_port_num. For matching sibling devices/port of the same HCA, compare the HCA GUID reported on each device rather than just assuming PCIe ids have similar attributes. 2) From Amir Tzin: Use HCA defined Timouts Replace hard coded timeouts with values stored by firmware in default timeouts register (DTOR). Timeouts are read during driver load. If DTOR is not supported by firmware then fallback to hard coded defaults instead. 3) From Shay Drory: Disable roce at HCA level Disable RoCE in Firmware when devlink roce parameter is set to off. 4) A small set of trivial cleanups ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-14 Maciej Machnikowski says: Extend the driver implementation to support PTP pins on E810-T and derivative devices. E810-T adapters are equipped with: - 2 external bidirectional SMA connectors - 1 internal TX U.FL shared with SMA1 - 1 internal RX U.FL shared with SMA2 The SMA and U.FL configuration is controlled by the external multiplexer. E810-T Derivatives are equipped with: - 2 1PPS outputs on SDP20 and SDP22 - 2 1PPS inputs on SDP21 and SDP23 --- v2: - Remove defensive programming check and simplify return statement (Patch 3) - Remove unnecessary parentheses (Patch 4) ==================== Signed-off-by: -
David S. Miller authored
Mat Martineau says: ==================== mptcp: A few fixes This set has three separate changes for the net-next tree: Patch 1 guarantees safe handling and a warning if a NULL value is encountered when gathering subflow data for the MPTCP_SUBFLOW_ADDRS socket option. Patch 2 increases the default number of subflows allowed per MPTCP connection. Patch 3 makes an existing function 'static'. ==================== Signed-off-by: -
Mat Martineau authored
This function is only used within pm_netlink.c now. Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support") Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
The current default does not allowing additional subflows, mostly as a safety restriction to avoid uncontrolled resource consumption on busy servers. Still the system admin and/or the application have to opt-in to MPTCP explicitly. After that, they need to change (increase) the default maximum number of additional subflows. Let set that to reasonable default, and make end-users life easier. Additionally we need to update some self-tests accordingly. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Tim Gardner authored
Coverity complains of a possible NULL dereference in mptcp_getsockopt_subflow_addrs(): 861 } else if (sk->sk_family == AF_INET6) { 3. returned_null: inet6_sk returns NULL. [show details] 4. var_assigned: Assigning: np = NULL return value from inet6_sk. 862 const struct ipv6_pinfo *np = inet6_sk(sk); Fix this by checking for NULL. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/231 Fixes: c11c5906 ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support") Cc: Florian Westphal <fw@strlen.de> Signed-off-by:Tim Gardner <tim.gardner@canonical.com> [mjm: Added WARN_ON_ONCE() to the unexpected case] Signed-off-by:
-
Rongwei Liu authored
With specific NICs, the PFs may have different PCIe ids like 0001:01:00.0/1 and 0002:02:00:00/1. For PFs with the same system_image_guid, driver should consider them under the same physical NIC and they are legal to bond together. If firmware doesn't support system_image_guid, set it to zero and fallback to use PCIe ids. Signed-off-by:
Rongwei Liu <rongweil@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Rongwei Liu authored
Using "native_port_num" can support more NICs. Fallback to PCIe IDs if "native_port_num" query fails. Signed-off-by:
-
Rongwei Liu authored
Downstream patches. Signed-off-by:
-
Rongwei Liu authored
When querying system_image_guid from firmware, we should check return value first. The buffer content is valid only if query succeed. Signed-off-by:
-
Len Baker authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, refactor the code a bit to use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by:
Len Baker <len.baker@gmx.com> Signed-off-by:
-
Abhiram R N authored
As multiple places EOPNOTSUPP and EINVAL is returned from driver it becomes difficult to understand the reason only with error code. With the netlink extack message exact reason will be known and will aid in debugging. Signed-off-by:
Abhiram R N <abhiramrn@gmail.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Paul Blakey authored
If CT fails to initialize it's rhashtables, it doesn't destroy the ct nat global table. Destroy the ct nat global table on ct init failure. Fixes: d7cade51 ("net/mlx5e: check return value of rhashtable_init") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
-
Shay Drory authored
Currently, when a user disables roce via the devlink param, this change isn't passed down to the device. If device allows disabling RoCE at device level, make use of it. This instructs the device to skip memory allocations related to RoCE functionality which otherwise is done by the device. Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
Moosa Baransi authored
Enable steering IPoIB packets via ethtool, the same way it is done today for Ethernet packets. Signed-off-by:
Moosa Baransi <moosab@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Currently, SMFS mode doesn't support rx-loopback flows which causes bridge egress rules to be rejected because without hint rules for both rx and tx destinations are created by default. Provide explicit flow source hints for compatibility with SMFS. Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Amir Tzin authored
Replace hard coded timeouts with values stored by firmware in default timeouts register (DTOR). Timeouts are read during driver load. If DTOR is not supported by firmware then fallback to hard coded defaults instead. Signed-off-by:
Amir Tzin <amirtz@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Amir Tzin authored
Replace hard coded timeouts with values stored in firmware's init segment. Timeouts are read from init segment during driver load. If init segment timeouts are not supported then fallback to hard coded defaults instead. Also move pre initialization timeouts which cannot be read from firmware to the new mechanism. Signed-off-by:
Amir Tzin <amirtz@mellanox.com> Reviewed-by:
-
Amir Tzin authored
Add needed structures and defines for DTOR (default timeouts register). This will be used to get timeouts values from FW instead of hard coded values in the driver code thus enabling support for slower devices which need longer timeouts. Signed-off-by:
-
- 15 Oct, 2021 14 commits
-
-
Maciej Fijalkowski authored
Go through the code base and use ice_for_each_* macros. While at it, introduce ice_for_each_xdp_txq() macro that can be used for looping over xdp_rings array. Commit is not introducing any new functionality. Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Maciej Fijalkowski authored
Under rare circumstances there might be a situation where a requirement of having XDP Tx queue per CPU could not be fulfilled and some of the Tx resources have to be shared between CPUs. This yields a need for placing accesses to xdp_ring inside a critical section protected by spinlock. These accesses happen to be in the hot path, so let's introduce the static branch that will be triggered from the control plane when driver could not provide Tx queue dedicated for XDP on each CPU. Currently, the design that has been picked is to allow any number of XDP Tx queues that is at least half of a count of CPUs that platform has. For lower number driver will bail out with a response to user that there were not enough Tx resources that would allow configuring XDP. The sharing of rings is signalled via static branch enablement which in turn indicates that lock for xdp_ring accesses needs to be taken in hot path. Approach based on static branch has no impact on performance of a non-fallback path. One thing that is needed to be mentioned is a fact that the static branch will act as a global driver switch, meaning that if one PF got out of Tx resources, then other PFs that ice driver is servicing will suffer. However, given the fact that HW that ice driver is handling has 1024 Tx queues per each PF, this is currently an unlikely scenario. Signed-off-by:
George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by:
-
Maciej Fijalkowski authored
Optimize Tx descriptor cleaning for XDP. Current approach doesn't really scale and chokes when multiple flows are handled. Introduce two ring fields, @next_dd and @next_rs that will keep track of descriptor that should be looked at when the need for cleaning arise and the descriptor that should have the RS bit set, respectively. Note that at this point the threshold is a constant (32), but it is something that we could make configurable. First thing is to get away from setting RS bit on each descriptor. Let's do this only once NTU is higher than the currently @next_rs value. In such case, grab the tx_desc[next_rs], set the RS bit in descriptor and advance the @next_rs by a 32. Second thing is to clean the Tx ring only when there are less than 32 free entries. For that case, look up the tx_desc[next_dd] for a DD bit. This bit is written back by HW to let the driver know that xmit was successful. It will happen only for those descriptors that had RS bit set. Clean only 32 descriptors and advance the DD bit. Actual cleaning routine is moved from ice_napi_poll() down to the ice_xmit_xdp_ring(). It is safe to do so as XDP ring will not get any SKBs in there that would rely on interrupts for the cleaning. Nice side effect is that for rare case of Tx fallback path (that next patch is going to introduce) we don't have to trigger the SW irq to clean the ring. With those two concepts, ring is kept at being almost full, but it is guaranteed that driver will be able to produce Tx descriptors. This approach seems to work out well even though the Tx descriptors are produced in one-by-one manner. Test was conducted with the ice HW bombarded with packets from HW generator, configured to generate 30 flows. Xdp2 sample yields the following results: <snip> proto 17: 79973066 pkt/s proto 17: 80018911 pkt/s proto 17: 80004654 pkt/s proto 17: 79992395 pkt/s proto 17: 79975162 pkt/s proto 17: 79955054 pkt/s proto 17: 79869168 pkt/s proto 17: 79823947 pkt/s proto 17: 79636971 pkt/s </snip> As that sample reports the Rx'ed frames, let's look at sar output. It says that what we Rx'ed we do actually Tx, no noticeable drops. Average: IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s %ifutil Average: ens4f1 79842324.00 79842310.40 4678261.17 4678260.38 0.00 0.00 0.00 38.32 with tx_busy staying calm. When compared to a state before: Average: IFACE rxpck/s txpck/s rxkB/s txkB/s rxcmp/s txcmp/s rxmcst/s %ifutil Average: ens4f1 90919711.60 42233822.60 5327326.85 2474638.04 0.00 0.00 0.00 43.64 it can be observed that the amount of txpck/s is almost doubled, meaning that the performance is improved by around 90%. All of this due to the drops in the driver, previously the tx_busy stat was bumped at a 7mpps rate. Signed-off-by:
-
Maciej Fijalkowski authored
With rings being split, it is now convenient to introduce a pointer to XDP ring within the Rx ring. For XDP_TX workloads this means that xdp_rings array access will be skipped, which was executed per each processed frame. Also, read the XDP prog once per NAPI and if prog is present, set up the local xdp_ring pointer. Reading prog a single time was discussed in [1] with some concern raised by Toke around dispatcher handling and having the need for going through the RCU grace period in the ndo_bpf driver callback, but ice currently is torning down NAPI instances regardless of the prog presence on VSI. Although the pointer to XDP ring introduced to Rx ring makes things a lot slimmer/simpler, I still feel that single prog read per NAPI lifetime is beneficial. Further patch that will introduce the fallback path will also get a profit from that as xdp_ring pointer will be set during the XDP rings setup. [1]: https://lore.kernel.org/bpf/87k0oseo6e.fsf@toke.dk/Signed-off-by:
-
Maciej Fijalkowski authored
xdp_frame is not needed for XDP_TX data path in ice driver case. For this data path cleaning of sent descriptor will not happen anywhere outside of the driver, which means that carrying the information about the underlying memory model via xdp_frame will not be used. Therefore, this conversion can be simply dropped, which would relieve CPU a bit. Signed-off-by:
-
Maciej Fijalkowski authored
There has been a long lasting issue of improper xdp_rings indexing for XDP_TX and XDP_REDIRECT actions. Given that currently rx_ring->q_index is mixed with smp_processor_id(), there could be a situation where Tx descriptors are produced onto XDP Tx ring, but tail is never bumped - for example pin a particular queue id to non-matching IRQ line. Address this problem by ignoring the user ring count setting and always initialize the xdp_rings array to be of num_possible_cpus() size. Then, always use the smp_processor_id() as an index to xdp_rings array. This provides serialization as at given time only a single softirq can run on a particular CPU. Signed-off-by:
-
Maciej Fijalkowski authored
While it was convenient to have a generic ring structure that served both Tx and Rx sides, next commits are going to introduce several Tx-specific fields, so in order to avoid hurting the Rx side, let's pull out the Tx ring onto new ice_tx_ring and ice_rx_ring structs. Rx ring could be handled by the old ice_ring which would reduce the code churn within this patch, but this would make things asymmetric. Make the union out of the ring container within ice_q_vector so that it is possible to iterate over newly introduced ice_tx_ring. Remove the @size as it's only accessed from control path and it can be calculated pretty easily. Change definitions of ice_update_ring_stats and ice_fetch_u64_stats_per_ring so that they are ring agnostic and can be used for both Rx and Tx rings. Sizes of Rx and Tx ring structs are 256 and 192 bytes, respectively. In Rx ring xdp_rxq_info occupies its own cacheline, so it's the major difference now. Signed-off-by:
-
Maciej Fijalkowski authored
Currently ice_container_type is scoped only for ice_ethtool.c. Next commit that will split the ice_ring struct onto Rx/Tx specific ring structs is going to also modify the type of linked list of rings that is within ice_ring_container. Therefore, the functions that are taking the ice_ring_container as an input argument will need to be aware of a ring type that will be looked up. Embed ice_container_type within ice_ring_container and initialize it properly when allocating the q_vectors. Signed-off-by:
-
Maciej Fijalkowski authored
This field is dead and driver is not making any use of it. Simply remove it. Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add support for IRQ coalescing This patch set adds support for interrupts coalescing in dpaa2-eth. The first patches add support for the hardware level configuration of the IRQ coalescing in the dpio driver, while the ones that touch the dpaa2-eth driver are responsible for the ethtool user interraction. With the adaptive IRQ coalescing in place and enabled we have observed the following changes in interrupt rates on one A72 core @2.2GHz (LX2160A) while running a Rx TCP flow. The TCP stream is sent on a 10Gbit link and the only cpu that does Rx is fully utilized. IRQ rate (irqs / sec) before: 4.59 Gbits/sec 24k after: 5.67 Gbits/sec 1.3k ==================== Signed-off-by: -
Ioana Ciornei authored
Add support for adaptive interrupt coalescing to the dpaa2-eth driver. First of all, ETHTOOL_COALESCE_USE_ADAPTIVE_RX is defined as a supported coalesce parameter and the requested state is configured through the dpio APIs added in the previous patch. Besides the ethtool API interaction, we keep track of how many bytes and frames are dequeued per CDAN (Channel Data Availability Notification) and update the Net DIM instance through the dpaa2_io_update_net_dim() API. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Use the generic dynamic interrupt moderation (dim) framework to implement adaptive interrupt coalescing on Rx. With the per-packet interrupt scheme, a high interrupt rate has been noted for moderate traffic flows leading to high CPU utilization. The dpio driver exports new functions to enable/disable adaptive IRQ coalescing on a DPIO object, to query the state or to update Net DIM with a new set of bytes and frames dequeued. Signed-off-by:
-
Ioana Ciornei authored
Use the newly exported dpio driver API to manually configure the IRQ coalescing parameters requested by the user. The .get_coalesce() and .set_coalesce() net_device callbacks are implemented and directly export or setup the rx-usecs on all the channels configured. Signed-off-by:
-
Ioana Ciornei authored
In DPAA2 based SoCs, the IRQ coalesing support per software portal has 2 configurable parameters: - the IRQ timeout period (QBMAN_CINH_SWP_ITPR): how many 256 QBMAN cycles need to pass until a dequeue interrupt is asserted. - the IRQ threshold (QBMAN_CINH_SWP_DQRR_ITR): how many dequeue responses in the DQRR ring would generate an IRQ. Add support for setting up and querying these IRQ coalescing related parameters. Signed-off-by:
-
