- 26 Nov, 2014 1 commit
-
-
Varka Bhadram authored
Signed-off-by:
Varka Bhadram <varkab@cdac.in> Acked-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
- 19 Nov, 2014 6 commits
-
-
Amitkumar Karwar authored
Host sleep status flag should be reset when there is an interrupt from device. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Cathy Luo <cluo@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
-
Amitkumar Karwar authored
This can be used to have GPIO host wakeup method suitable for the platform and configurable GAP for host sleep handshake. Signed-off-by:
-
Amitkumar Karwar authored
Calibration data can be downloaded through device tree method. This patch adds the documentation. Also, instead of searching device tree node by name using of_find_node_by_name() API, let's use for_each_compatible_node(). Signed-off-by:
-
Johan Hedberg authored
This patch converts the hdev->link_keys list to be protected through RCU, thereby eliminating the need to hold the hdev lock while accessing the list. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Johan Hedberg authored
When a connection is requested the conn->pending_sec_level value gets set to whatever level the user requested the connection to be. During the pairing process there are various sanity checks to try to ensure that the right length PIN or right IO Capability is used to satisfy the target security level. However, when we finally get hold of the link key that is to be used we should still set the actual final security level from the key type. This way when we eventually get an Encrypt Change event the correct value gets copied to conn->sec_level. Signed-off-by:
-
Johan Hedberg authored
In __hci_cmd_sync_ev() and __hci_req_sync() if the hci_req_run() call fails and we return from the functions we should ensure that the state doesn't remain in TASK_INTERRUPTIBLE that we just set it to. This patch fixes missing calls to set_current_state(TASK_RUNNING) in both places. Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
-
- 18 Nov, 2014 4 commits
-
-
Fabio K authored
This variant requires the flag BTUSB_BCM_PATCHRAM to work. Relevant details from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3404 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=240A646F1XXX C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) The firmware was extracted from a Windows 8.1 64-bit installation and converted from 'hex' to 'hcd' for use in Linux. Under Windows it also identifies itself as BCM20702A0, but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex" and is located in "%SYSTEMROOT%\system32\drivers\" (md5 67cf6bfdae61c4bb819a66da984f7913) (sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f) The same firmware file is also available as a download at http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All marked as "Bluetooth driver ver:12.0.0.7820" 'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd" inside the firmware directory (e.g. "/lib/firmware") Signed-off-by:
Fabio K <healthkit@gmail.com> Signed-off-by:
-
Johan Hedberg authored
Doing things like hci_conn_hash_flush() while holding the hdev lock is risky since its synchronous pending work cancellation could cause the L2CAP layer to try to reacquire the hdev lock. Right now there doesn't seem to be any obvious places where this would for certain happen but it's already enough to cause lockdep to start warning against the hdev and the work struct locks being taken in the "wrong" order: [ +0.000373] mgmt-tester/1603 is trying to acquire lock: [ +0.000292] ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181 [ +0.000270] but task is already holding lock: [ +0.000000] (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359 [ +0.000000] which lock already depends on the new lock. [ +0.000000] the existing dependency chain (in reverse order) is: [ +0.000000] -> #1 (&hdev->lock){+.+.+.}: [ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156 [ +0.000000] [<c140c663>] mutex_lock_nested+0x54/0x375 [ +0.000000] [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c [ +0.000000] [<c13d7ca4>] process_pending_rx+0x50/0x5e [ +0.000000] [<c1041a3f>] process_one_work+0x21c/0x436 [ +0.000000] [<c1041e3d>] worker_thread+0x1be/0x251 [ +0.000000] [<c1045a22>] kthread+0x94/0x99 [ +0.000000] [<c140f801>] ret_from_kernel_thread+0x21/0x30 [ +0.000000] -> #0 ((&conn->pending_rx_work)){+.+.+.}: [ +0.000000] [<c105e158>] __lock_acquire+0xa07/0xc89 [ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156 [ +0.000000] [<c1042696>] flush_work+0x29/0x181 [ +0.000000] [<c1042864>] __cancel_work_timer+0x76/0x8f [ +0.000000] [<c104288c>] cancel_work_sync+0xf/0x11 [ +0.000000] [<c13d4c18>] l2cap_conn_del+0x72/0x183 [ +0.000000] [<c13d8953>] l2cap_disconn_cfm+0x49/0x55 [ +0.000000] [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3 [ +0.000000] [<c13b9af6>] hci_dev_do_close+0x1dc/0x359 [ +0.012038] [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3 [ +0.000000] [<c12d33c1>] vhci_release+0x28/0x47 [ +0.000000] [<c10dd6a9>] __fput+0xd6/0x154 [ +0.000000] [<c10dd757>] ____fput+0xd/0xf [ +0.000000] [<c1044bb2>] task_work_run+0x6b/0x8d [ +0.000000] [<c1001bd2>] do_notify_resume+0x3c/0x3f [ +0.000000] [<c140fa70>] work_notifysig+0x29/0x31 [ +0.000000] other info that might help us debug this: [ +0.000000] Possible unsafe locking scenario: [ +0.000000] CPU0 CPU1 [ +0.000000] ---- ---- [ +0.000000] lock(&hdev->lock); [ +0.000000] lock((&conn->pending_rx_work)); [ +0.000000] lock(&hdev->lock); [ +0.000000] lock((&conn->pending_rx_work)); [ +0.000000] *** DEADLOCK *** Fully fixing this would require some quite heavy refactoring to change how the hdev lock and hci_conn instances are handled together. A simpler solution for now which this patch takes is to try ensure that the hdev workqueue is empty before proceeding with the various cleanup calls, including hci_conn_hash_flush(). Signed-off-by: -
Johan Hedberg authored
The common short form of "randomizer" is "rand" in many places (including the Bluetooth specification). The shorter version also makes for easier to read code with less forced line breaks. This patch renames all occurences of "randomizer" to "rand" in the Bluetooth subsystem code. Signed-off-by:
-
Johan Hedberg authored
For now the mgmt commands dealing with remote OOB data are strictly BR/EDR-only. This patch fixes missing checks for the passed address type so that any non-BR/EDR value triggers the appropriate error response. Signed-off-by:
-
- 17 Nov, 2014 13 commits
-
-
Alexander Aring authored
This patch changes the byteorder handling for short and panid handling. We now except to get little endian in nl802154 for these attributes. Signed-off-by:
-
Alexander Aring authored
This patch moves the 802.15.4 constraints WPAN_NUM_ defines into "net/ieee802154.h" which should contain all necessary 802.15.4 related information. Also rename these defines to a common name which is IEEE802154_MAX_CHANNEL and IEEE802154_MAX_PAGE. Signed-off-by:
-
Alexander Aring authored
This patch adds support for deleting a wpan interface via nl802154. Signed-off-by:
-
Alexander Aring authored
This patch adds support for setting an extended address while registration a new interface. If ieee802154_is_valid_extended_addr getting as parameter and invalid extended address then the perm address is fallback. This is useful to make some default handling while for example default registration of a wpan interface while phy registration. Signed-off-by:
-
Alexander Aring authored
This patch adds a new nl802154 command for adding a new interface according to a wpan phy via nl802154. Signed-off-by:
-
Alexander Aring authored
This parameter was grabbed from wireless implementation with the identically wireless dev struct. We don't need this right now and so we remove it. Maybe we will add it later again if we found any real reason to have such parameter. Signed-off-by:
-
Alexander Aring authored
This patch replace the depracted IEEE802154_DEV to the new introduced NL802154_IFTYPE_NODE types. There is a backwards compatibility to have the identical types for both enum definitions. Also remove some inlcude issue with "linux/nl802154.h", because the export nl_policy inside this header it was always necessary to have an include of "net/rtnetlink.h" before. The reason for this is more complicated. Nevertheless we removed this now, because "linux/nl802154.h" is the depracted netlink interface. Signed-off-by:
-
Alexander Aring authored
We don't and we can't name it zigbee anymore. This patch removes deprecated information for project website. Signed-off-by:
-
Alexander Aring authored
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Alexander Aring authored
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by:
-
Alexander Aring authored
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by:
-
Alexander Aring authored
This patch fix an copy&paste issue in the comment of setting symbol duration. These comments are more correct according the at86rf212 datasheet now. Signed-off-by:
-
Alexander Aring authored
This patch removes some prototypes which are not used anymore. Signed-off-by:
-
- 15 Nov, 2014 9 commits
-
-
Johan Hedberg authored
When passed BDADDR_ANY the Remove Remote OOB Data comand is specified to clear all entries. This patch adds the necessary check and calls hci_remote_oob_data_clear() when necessary. Signed-off-by:
-
Johan Hedberg authored
This patch adds some extra debug logs to L2CAP related code. These are mainly to help track locking issues but will probably be useful for debugging other types of issues as well. Signed-off-by:
-
Johan Hedberg authored
Now that the SMP related key lists are converted to RCU there is nothing in smp_cmd_sign_info() or smp_cmd_ident_addr_info() that would require taking the hdev lock (including the smp_distribute_keys call). This patch removes this unnecessary locking. Signed-off-by:
-
Johan Hedberg authored
This patch set converts the hdev->identity_resolving_keys list to use RCU to eliminate the need to use hci_dev_lock/unlock. An additional change that must be done is to remove use of CRYPTO_ALG_ASYNC for the hdev-specific AES crypto context. The reason is that this context is used for matching RPAs and the loop that does the matching is under the RCU read lock, i.e. is an atomic section which cannot sleep. Signed-off-by:
-
Johan Hedberg authored
This patch set converts the hdev->long_term_keys list to use RCU to eliminate the need to use hci_dev_lock/unlock. Signed-off-by:
-
Johan Hedberg authored
The insufficient authentication/encryption errors indicate to the L2CAP client that it should try to elevate the security level. Since there really isn't any exception to this rule it makes sense to fully handle it on the kernel side instead of pushing the responsibility to user space. This patch adds special handling of these two error codes and calls smp_conn_security() with the elevated security level if necessary. Signed-off-by:
-
Johan Hedberg authored
So far smp_sufficient_security() has returned false if we're encrypted with an STK but do have an LTK available. However, for the sake of LE CoC servers we do want to let the incoming connection through even though we're only encrypted with the STK. This patch adds a key preference parameter to smp_sufficient_security() with two possible values (enum used instead of bool for readability). Signed-off-by:
-
Johan Hedberg authored
For LE CoC L2CAP servers we don't do security level elevation during the BT_CONNECT2 state (instead LE CoC simply sends an immediate error response if the security level isn't high enough). Therefore if we get a security level change while an LE CoC channel is in the BT_CONNECT2 state we should simply do nothing. Signed-off-by:
-
Fabian Frederick authored
use memdup_user for rd_data import. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
- 13 Nov, 2014 6 commits
-
-
Johan Hedberg authored
Server channels in BT_LISTEN state should use L2CAP_NESTING_PARENT. This patch fixes the nesting value for the 6lowpan channel. Signed-off-by:
-
Johan Hedberg authored
There's no reason why all users of L2CAP would need to worry about initializing chan->nesting to L2CAP_NESTING_NORMAL (which is important since 0 is the same as NESTING_SMP). This patch moves the initialization to the common place that's used to create all new channels, i.e. the l2cap_chan_create() function. Signed-off-by:
-
Johan Hedberg authored
The teardown callback for L2CAP channels is problematic in that it is explicitly called for all types of channels from l2cap_chan_del(), meaning it's not possible to hard-code a nesting level when taking the socket lock. The simplest way to have a correct nesting level for the socket locking is to use the same value as for the chan. This also means that the other places trying to lock parent sockets need to be update to use the chan value (since L2CAP_NESTING_PARENT is defined as 2 whereas SINGLE_DEPTH_NESTING has the value 1). Signed-off-by:
-
Johan Hedberg authored
By default lockdep considers all L2CAP channels equal. This would mean that we get warnings if a channel is locked when another one's lock is tried to be acquired in the same thread. This kind of inter-channel locking dependencies exist in the form of parent-child channels as well as any channel wishing to elevate the security by requesting procedures on the SMP channel. To eliminate the chance for these lockdep warnings we introduce a nesting level for each channel and use that when acquiring the channel lock. For now there exists the earlier mentioned three identified categories: SMP, "normal" channels and parent channels (i.e. those in BT_LISTEN state). The nesting level is defined as atomic_t since we need access to it before the lock is actually acquired. Signed-off-by:
-
Alexander Aring authored
This patch removes the interframe spacing time workaround from at86rf230 driver and use the mac802154 one. The interframe spacing time differs at at86rf212 and channel setting. This patch fix this handling which is also a new workaround and should be moved into mac802154 while channel setting. Signed-off-by:
-
Alexander Aring authored
This patch adds a new interframe spacing time handling into mac802154 layer. Interframe spacing time is a time period between each transmit. This patch adds a high resolution timer into mac802154 and starts on xmit complete with corresponding interframe spacing expire time if ifs_handling is true. We make it variable because it depends if interframe spacing time is handled by transceiver or mac802154. At the timer complete function we wake the netdev queue again. This avoids new frame transmit in range of interframe spacing time. For synced driver we add no handling of interframe spacing time. This is currently a lack of support in all synced xmit drivers. I suppose it's working because the latency of workqueue which is needed to call spi_sync. Signed-off-by:
-
- 12 Nov, 2014 1 commit
-
-
Johan Hedberg authored
The mgmt_user_passkey_request and related functions do not do anything else except read access to hdev->id. This member never changes after the hdev creation so there is no need to acquire a lock to read it. Signed-off-by:
-
