To consolidate all gvt private MMIO definition in one place,
this moves some not yet used in i915 to reg.h.
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Caught by W=1 to fix left wrong function comment doc.
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Make kvmgt_dma_map/unmap_guest_page as static function.
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

if a context is a restore inhibit context, gfx hw only load the first page
for ring context, so we only need to copy from guest the 1 page too.

v3: use "return" instead of "goto" for inhibit case. (zhenyu wang)
v2: move judgement of restore inhibit to a macro in  mmio_context.h
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Acked-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

MI_NOOP is a common command appearing in almost all command buffers, put it
into a fastpath can improve perfomance, especially in command buffers
contains lots of MI_NOOPs (0s).

Take glmark2 as an example, 3% performance increase is observed after
introduced this patch. Meanwhile, in case where abundant in MI_NOOPs,
up to 12% performance increase is measured.

v2: use lowercase for index of MI_NOOP in cmd_info (zhenyu wang)
Signed-off-by: Li Weinan <weinan.z.li@intel.com>
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This helps initramfs builder and other tools to know the full dependencies
of i915 and have gvt module loaded with i915.

v2: add condition and change to pre-dependency (Chris)
v3: move declaration to gvt.c. (Chris)
v4: remove xengt (Zhenyu)
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

BXT supports EDP. However since GVT-g only simulate DP monitor
to guest and handles EDP_PSR_IMR and EDP_PSR_IIR as default MMIO
r/w. If guest r/w these IMR/IIR, GVT-g won't simulate the real
HW behavior and below warning is printed:
--------
Interrupt register 0x64838 is not zero: 0xffffffff
WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/i915_irq.c:161
gen3_assert_iir_is_zero+0x34/0xa0

Call Trace:
gen8_de_irq_postinstall+0xad/0x330
gen8_irq_postinstall+0x23/0x80
drm_irq_install+0xb5/0x130
i915_driver_load+0xafd/0xf70
--------
Since GVT-g won't simulate EDP to guest, always set EDP_PSR_IMR
and EDP_PSR_IIR IMR/IIR to 0.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Now GVTg supports shadowing both 2M/64K huge gtt pages. So let's turn on
the cap info bit VGT_CAPS_HUGE_GTT.

v2: Split changes in i915 side into a separated patch.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Don't forget to free allocated spt if shadowing failed.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

If the guest update the 64K gtt entry before changing IPS bit of PDE, we
need to re-shadow the whole page table. Because we have ignored all
updates to unused entries.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This add 2M huge gtt support for GVTg. Unlike 64K gtt entry, we can
shadow 2M guest entry with real huge gtt. But before that, we have to
check memory physical continuous, alignment and if it is supported on
the host. We can get all supported page sizes from
intel_device_info.page_sizes.

Finally we must split the 2M page into smaller pages if we cannot
satisfy guest Huge Page.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

To support huge gtt, we need to support huge pages in kvmgt first.
This patch adds a 'size' param to the intel_gvt_mpt::dma_map_guest_page
API and implements it in kvmgt.

v2: rebase.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Finally, this add the first huge gtt support for GVTg - 64K pages. Since
64K page and 4K page cannot be mixed on the same page table, so we always
split a 64K entry into small 4K page. And when unshadow guest 64K entry,
we need ensure all the shadowed entries in shadow page table also get
cleared.

For page table which has 64K gtt entry, only PTE#0, PTE#16, PTE#32, ...
PTE#496 are used. Unused PTEs update should be ignored.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

64K PTE is special, only PTE#0, PTE#16, PTE#32, ... PTE#496 are used in
the page table.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

We need a interface to allocate a pure shadow page which doesn't have
a guest page associated with. Such shadow page is used to shadow 2M
huge gtt entry.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Add clear_pse operation in case we need to split huge gtt into small pages.

v2: correct description.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This add a software PTE flag on the Ignored bit of PTE. It will be used
to identify splited 64K shadow entries.

v2: fix mask definition.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

This change help us detect the real entry type per PSE and IPS setting.
For 64K entry, we also need to check reg GEN8_GAMW_ECO_DEV_RW_IA.

v2: Extend IPS mmio control to Gen10. (Matthew Auld)
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

The register RENDER_HWS_PGA_GEN7 is renamed to GEN8_GAMW_ECO_DEV_RW_IA
from GEN8 which can control IPS enabling.

v3: MMIO control for IPS is not removed from gen9 but gen10 (Matthew Auld)
v2: IPS of all engines must be enabled together for gen9.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Add three IPS operation functions to test/set/clear IPS in PDE.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Add a new entry type GTT_TYPE_PPGTT_PTE_64K_ENTRY. 64K entry is very
different from 2M/1G entry. 64K entry is controlled by IPS bit in upper
PDE. To leverage the current logic, I take IPS bit as 'PSE' for PTE
level. Which means, 64K entries can also processed by get_pse_type().

v2: Make it bisectable.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Enable KVMGT for BXT.
is_supported_device() acting as the gatekeeper of GVT-g init.
If all supported platforms share the same configurations for some
specific feature, platform check will rely on this check only.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Leverage most SKL/KBL mmio init info and add different mmio to
BXT specific function init_bxt_mmio_info().
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Handle dma_buf on BXT as SKL and KBL.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Virtual monitor on BXT start from port B.
Unlike SKL/KBL, digital display port connectivity is detected via
GEN8_DE_PORT_ISR so emulate monitor state change by setting it.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

BXT forcewake is handled in the same way as SKL/KBL.

v2: Add missing inhibit_context restore for BXT.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Handle BXT cmd_parser as SKL/KBL.

v2: All supported platforms share the same routines.
    Remove the platform check by now and let is_supported_device()
    be the gate keeper.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Handle pending tlb flush, mocs/mmio switch and context as KBL.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Initialize BXT irq handler as SKL/KBL.

v2: All supported platforms share the same irq ops and map.
    Remove the platform check by now and let is_supported_device()
    be the gate keeper.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Initialize BXT gtt as SKL/KBL.

v2: All supported platforms share the same gtt ops.
    Remove the platform check by now and let is_supported_device()
    be the gate keeper.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Initialize BXT device info as SKL/KBL.

v2: All supported platforms share the same device configuration.
    Remove the platform check by now and let is_supported_device()
    be the gate keeper.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

As referred in PRM for Broxton Graphics on 01.org
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Broxton belongs to GEN9 family so add to SKL and GEN9 plus.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Array 'pdp_pair' of size 1 may use index value(s) 1..7.
Changed to pdps[8] to avoid confusion.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

type is already checked in the function entry. So it is unnecessary
to check it again.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Add sanity check for up_irq_info.
Signed-off-by: Xinyun Liu <xinyun.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Backmerge for recent request->hw_context change and
new vGPU huge page capability definition.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The macro declared the ppgtt parameter but implicitly used the local vm
instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606205128.25952-1-chris@chris-wilson.co.uk

When we reach the magic value and do inject a fault into our module load,
mark the module option as being hit. Since we fail from inside pci
probe, the module load isn't actually aborted and the module (and
parameters) are left lingering. igt can then inspect the parameter on its
synchronous completion of modprobe to see if the fault injection was
successful, and will keeping on injecting new faults until the module
succeeds in loading having surpassed the number of fault points.

v2: Reset to 0 after being hit;
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606144153.4244-1-chris@chris-wilson.co.uk