So that it can return enum variable_match_type to be propagated to the
find_data_type_die().  Also update the debug message to show the result
of the check_matching_type().

  chk [dd] reg0 offset=0 ok=1 kind=1  : Good!
or
  chk [177] reg4 offset=0x138 ok=0 kind=0 cfa : no type information
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-6-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that it can show a proper debug message in the right place.  The
check_variable() is used in other places which don't want to print the
message.

  $ perf --debug type-profile annotate --data-type

Before:
  -----------------------------------------------------------
  find data type for 0x140(reg14) at update_blocked_averages+0x2db
  CU for kernel/sched/fair.c (die:0x12dd892)
  frame base: cfa=1 fbreg=7
  no pointer or no type                                         <<<--- removed
  check variable "__mptr" failed (die: 0x13022f1)
   variable location: base=reg14, offset=0x140
   type='void*' size=0x8 (die:0x12dd8f9)

After:
  -----------------------------------------------------------
  find data type for 0x140(reg14) at update_blocked_averages+0x2db
  CU for kernel/sched/fair.c (die:0x12dd892)
  frame base: cfa=1 fbreg=7
  found "__mptr" (die: 0x13022f1) in scope=4/4 (die: 0x13022e8) failed: no/void pointer  <<<--- here
   variable location: base=reg14, offset=0x140
   type='void*' size=0x8 (die:0x12dd8f9)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-5-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

And let check_variable() return the enum value so that callers can know
what was the problem.  This will be used by the later patch to update
the statistics correctly and print the error message in a right place.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-4-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The location list will have entries with half-open addressing like
[start, end) which means it doesn't include the end address.  So it
should skip entries at the end address and match to the next entry.

An example location list looks like this (from readelf -wo):

    00237876 ffffffff8110d32b (base address)
    0023787f v000000000000000 v000000000000002 views at 00237868 for:
             ffffffff8110d32b ffffffff8110d4eb (DW_OP_reg3 (rbx))     <<<--- 1
    00237885 v000000000000002 v000000000000000 views at 0023786a for:
             ffffffff8110d4eb ffffffff8110d50b (DW_OP_reg14 (r14))    <<<--- 2
    0023788c v000000000000000 v000000000000001 views at 0023786c for:
             ffffffff8110d50b ffffffff8110d7c4 (DW_OP_reg3 (rbx))
    00237893 v000000000000000 v000000000000000 views at 0023786e for:
             ffffffff8110d806 ffffffff8110d854 (DW_OP_reg3 (rbx))
    0023789a v000000000000000 v000000000000000 views at 00237870 for:
             ffffffff8110d876 ffffffff8110d88e (DW_OP_reg3 (rbx))

The first entry at 0023787f has [8110d32b, 8110d4eb) (omitting the
ffffffff at the beginning), and the second one has [8110d4eb, 8110d50b).

Fixes: 2bc3cf57 ("perf annotate-data: Improve debug message with location info")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-3-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It missed to call check_allowed_ops() in __die_collect_vars_cb() so it
can take variables with complex location expression incorrectly.

For example, I found some variable has this expression.

    015d8df8 ffffffff81aacfb3 (base address)
    015d8e01 v000000000000004 v000000000000000 views at 015d8df2 for:
             ffffffff81aacfb3 ffffffff81aacfd2 (DW_OP_fbreg: -176; DW_OP_deref;
						DW_OP_plus_uconst: 332; DW_OP_deref_size: 4;
						DW_OP_lit1; DW_OP_shra; DW_OP_const1u: 64;
						DW_OP_minus; DW_OP_stack_value)
    015d8e14 v000000000000000 v000000000000000 views at 015d8df4 for:
             ffffffff81aacfd2 ffffffff81aacfd7 (DW_OP_reg3 (rbx))
    015d8e19 v000000000000000 v000000000000000 views at 015d8df6 for:
             ffffffff81aacfd7 ffffffff81aad020 (DW_OP_fbreg: -176; DW_OP_deref;
						DW_OP_plus_uconst: 332; DW_OP_deref_size: 4;
						DW_OP_lit1; DW_OP_shra; DW_OP_const1u: 64;
						DW_OP_minus; DW_OP_stack_value)
    015d8e2c <End of list>

It looks like '((int *)(-176(%rbp) + 332) >> 1) - 64' but the current
code thought it's just -176(%rbp) and processed the variable incorrectly.
It should reject such a complex expression if check_allowed_ops()
doesn't like it. :)

Fixes: 932dcc2c ("perf dwarf-aux: Add die_collect_vars()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-2-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the latest perf-tools merge for 6.11, i.e. to have the
current perf tools branch that is getting into 6.11 with the
perf-tools-next that is geared towards 6.12.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently we'll only print metric headers for metric leader in
aggregration mode. This will make `perf iostat` header not shown
since it'll aggregrated globally but don't have metric events:

  root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
   Performance counter stats for 'system wide':
      port
  0000:00                    0                    0                    0                    0
  0000:80                    0                    0                    0                    0
  [...]

Fix this by excluding the iostat in the check of printing metric
headers. Then we can see the headers:

  root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
   Performance counter stats for 'system wide':
      port             Inbound Read(MB)    Inbound Write(MB)    Outbound Read(MB)   Outbound Write(MB)
  0000:00                    0                    0                    0                    0
  0000:80                    0                    0                    0                    0
  [...]

Fixes: 193a9e30 ("perf stat: Don't display metric header for non-leader uncore events")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: linuxarm@huawei.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/20240802065800.48774-1-yangyicong@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When perf_time__parse_str() fails in perf_sched__timehist(),
need to free session that was previously created, fix it.

Fixes: 853b7407 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull block fixes from Jens Axboe:

 - Fix corruption issues with s390/dasd (Eric, Stefan)

 - Fix a misuse of non irq locking grab of a lock (Li)

 - MD pull request with a single data corruption fix for raid1 (Yu)

* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
  block: Fix lockdep warning in blk_mq_mark_tag_wait
  md/raid1: Fix data corruption for degraded array with slow disk
  s390/dasd: fix error recovery leading to data corruption on ESE devices
  s390/dasd: Remove DMA alignment

Pull io_uring fixes from Jens Axboe:

 - Fix a comment in the uapi header using the wrong member name (Caleb)

 - Fix KCSAN warning for a debug check in sqpoll (me)

 - Two more NAPI tweaks (Olivier)

* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
  io_uring: fix user_data field name in comment
  io_uring/sqpoll: annotate debug task == current with data_race()
  io_uring/napi: remove duplicate io_napi_entry timeout assignation
  io_uring/napi: check napi_enabled in io_napi_add() before proceeding

Pull devicetree fixes from Rob Herring:

 - Fix a possible (but unlikely) out-of-bounds read in interrupts
   parsing code

 - Add AT25 EEPROM "fujitsu,mb85rs256" compatible

 - Update Konrad Dybcio's email

* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Prevent device address out-of-bounds read in interrupt map walk
  dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
  dt-bindings: Batch-update Konrad Dybcio's email

Pull thermal control fix from Rafael Wysocki:
 "Fix a Bang-bang thermal governor issue causing it to fail to reset the
  state of cooling devices if they are 'on' to start with, but the
  thermal zone temperature is always below the corresponding trip point
  (Rafael Wysocki)"

* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_bang_bang: Use governor_data to reduce overhead
  thermal: gov_bang_bang: Add .manage() callback
  thermal: gov_bang_bang: Split bang_bang_control()
  thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Pull ACPI fix from Rafael Wysocki:
 "Fix an issue related to the ACPI EC device handling that causes the
  _REG control method to be evaluated for EC operation regions that are
  not expected to be used.

  This confuses the platform firmware and provokes various types of
  misbehavior on some systems (Rafael Wysocki)"

* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Evaluate _REG outside the EC scope more carefully
  ACPICA: Add a depth argument to acpi_execute_reg_methods()
  Revert "ACPI: EC: Evaluate orphan _REG under EC device"

Pull libnvdimm fix from Ira Weiny:
 "Commit f467fee4 ("block: move the dax flag to queue_limits") broke
  the DAX tests by skipping over the legacy pmem mapping pages case.

  Set the DAX flag in this case as well"

* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases

io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull rust fixes from Miguel Ojeda:

 - Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
   upstream Rust for the upcoming 1.82.0).

 - Fix support for the latest version of rust-analyzer due to a change
   on rust-analyzer config file semantics (considered a fix since most
   developers use the latest version of the tool, which is the only one
   actually supported by upstream). I am discussing stability of the
   config file with upstream -- they may be able to start versioning it.

 - Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
   libclang (bindgen).

 - A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
   suppress error messages in a foreign architecture chroot and to use a
   proper default format.

 - Clean 'rust-analyzer' target warning due to missing recursive make
   invocation mark.

 - Clean Clippy warning due to missing indentation in docs.

 - Clean LLVM 19 build warning due to removed 3dnow feature upstream.

* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
  rust: x86: remove `-3dnow{,a}` from target features
  kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
  rust: add intrinsics to fix `-Os` builds
  kbuild: rust: skip -fmin-function-alignment in bindgen flags
  rust: Support latest version of `rust-analyzer`
  rust: macros: indent list item in `module!`'s docs
  rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
  rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT

Pull RISC-V fixes from Palmer Dabbelt:

 - reintroduce the text patching global icache flush

 - fix syscall entry code to correctly initialize a0, which manifested
   as a strace bug

 - XIP kernels now map the entire kernel, which fixes boot under at
   least DEBUG_VIRTUAL=y

 - initialize all nodes in the acpi_early_node_map initializer

 - fix OOB access in the Andes vendor extension probing code

 - A new key for scalar misaligned access performance in hwprobe, which
   correctly treat the values as an enum (as opposed to a bitmap)

* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
  RISC-V: hwprobe: Add SCALAR to misaligned perf defines
  RISC-V: hwprobe: Add MISALIGNED_PERF key
  RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  riscv: change XIP's kernel_map.size to be size of the entire kernel
  riscv: entry: always initialize regs->a0 to -ENOSYS
  riscv: Re-introduce global icache flush in patch_text_XXX()

Pull tracing fixes from Steven Rostedt:
 "A couple of fixes for tracing:

   - Prevent a NULL pointer dereference in the error path of RTLA tool

   - Fix an infinite loop bug when reading from the ring buffer when
     closed. If there's a thread trying to read the ring buffer and it
     gets closed by another thread, the one reading will go into an
     infinite loop when the buffer is empty instead of exiting back to
     user space"

* tag 'trace-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/osnoise: Prevent NULL dereference in error handling
  tracing: Return from tracing_buffers_read() if the file has been closed

Merge tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull key fixes from Jarkko Sakkinen:
 "Two bug fixes for a memory corruption bug and a memory leak bug in the
  DCP trusted keys type.

  Just as a reminder DCP was a crypto coprocessor in i.MX SoCs"

* tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: dcp: fix leak of blob encryption key
  KEYS: trusted: fix DCP blob payload length assignment

Merge tag 'for-6.11/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mikulas Patocka:

 - fix misbehavior if suspend or resume is interrupted by a signal

 - fix wrong indentation in dm-crypt.rst

 - fix memory allocation failure in dm-persistent-data

* tag 'for-6.11/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm persistent data: fix memory allocation failure
  Documentation: dm-crypt.rst warning + error fix
  dm resume: don't return EINVAL when signalled
  dm suspend: return -ERESTARTSYS instead of -EINTR

Pull iommu fixes from Joerg Roedel:

 - Bring back a lost return statement in io-page-fault code

 - Remove an unused function declaration

* tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu: Remove unused declaration iommu_sva_unbind_gpasid()
  iommu: Restore lost return in iommu_report_device_fault()

Pull gpio fix from Bartosz Golaszewski:

 - add the shutdown() callback to gpio-mlxbf3 in order to disable
   interrupts during graceful reboot

* tag 'gpio-fixes-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf3: Support shutdown() function

Pull sound fixes from Takashi Iwai:
 "All small fixes, mostly for usual suspects, HD-audio and USB-audio
  device-specific fixes / quirks. The Cirrus codec support took the
  update of SPI header as well. Other than that, there is a regression
  fix in the sanity check of ALSA timer code"

* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: Use correct endian conversion
  ALSA: usb-audio: Support Yamaha P-125 quirk entry
  ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda/tas2781: fix wrong calibrated data order
  ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
  ALSA: hda/realtek: Add support for new HP G12 laptops
  ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
  ALSA: timer: Relax start tick time check for slave timer elements
  spi: Add empty versions of ACPI functions

Pull drm fixes from Dave Airlie:
 "Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
  new IP block introduced in rc1, so should be fine. The xe fixes
  contain some missed fixes from the end of the previous round along
  with some fixes which required precursor changes, but otherwise
  everything seems fine,

  mediatek:
   - fix cursor crash

  amdgpu:
   - Fix MES ring buffer overflow
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP MST fix
   - Cursor fixes
   - JPEG fixes
   - Context ops validation
   - MES 12 fixes
   - VCN 5.0 fix
   - HDP fix

  panel:
   - dt bindings style fix
   - orientation quirks

  rockchip:
   - inno-hdmi: fix infoframe upload

  v3d:
   - fix OOB access in v3d_csd_job_run()

  xe:
   - Validate user fence during creation
   - Fix use after free when client stats are captured
   - SRIOV fixes
   - Runtime PM fixes"

* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
  drm/xe: Hold a PM ref when GT TLB invalidations are inflight
  drm/xe: Drop xe_gt_tlb_invalidation_wait
  drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
  drm/xe/pf: Fix VF config validation on multi-GT platforms
  drm/xe: Build PM into GuC CT layer
  drm/xe/vf: Fix register value lookup
  drm/xe: Fix use after free when client stats are captured
  drm/xe: Take a ref to xe file when user creates a VM
  drm/xe: Add ref counting for xe_file
  drm/xe: Move part of xe_file cleanup to a helper
  drm/xe: Validate user fence during creation
  drm/rockchip: inno-hdmi: Fix infoframe upload
  drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
  drm/amdgpu: Update kmd_fw_shared for VCN5
  drm/amd/amdgpu: command submission parser for JPEG
  drm/amdgpu/mes12: fix suspend issue
  drm/amdgpu/mes12: sw/hw fini for unified mes
  drm/amdgpu/mes12: configure two pipes hardware resources
  drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
  drm/amdgpu/mes12: add mes pipe switch support
  ...

After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.

For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.

However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.

To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net

After recent changes, the Bang-bang governor may not adjust the
initial configuration of cooling devices to the actual situation.

Namely, if a cooling device bound to a certain trip point starts in
the "on" state and the thermal zone temperature is below the threshold
of that trip point, the trip point may never be crossed on the way up
in which case the state of the cooling device will never be adjusted
because the thermal core will never invoke the governor's
.trip_crossed() callback.  [Note that there is no issue if the zone
temperature is at the trip threshold or above it to start with because
.trip_crossed() will be invoked then to indicate the start of thermal
mitigation for the given trip.]

To address this, add a .manage() callback to the Bang-bang governor
and use it to ensure that all of the thermal instances managed by the
governor have been initialized properly and the states of all of the
cooling devices involved have been adjusted to the current zone
temperature as appropriate.

Fixes: 530c932b ("thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()")
Link: https://lore.kernel.org/linux-pm/1bfbbae5-42b0-4c7d-9544-e98855715294@piie.net/
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/8419356.T7Z3S40VBb@rjwysocki.net

Move the setting of the thermal instance target state from
bang_bang_control() into a separate function that will be also called
in a different place going forward.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/3313587.aeNJFYEL58@rjwysocki.net

Instead of clearing the "updated" flag for each cooling device
affected by the trip point crossing in bang_bang_control() and
walking all thermal instances to run thermal_cdev_update() for all
of the affected cooling devices, call __thermal_cdev_update()
directly for each of them.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/13583081.uLZWGnKmhe@rjwysocki.net

Merge tag 'mediatek-drm-fixes-20240805' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes

Mediatek DRM Fixes - 20240805

1. Set sensible cursor width/height values to fix crash
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240810084605.3435-1-chunkuang.hu@kernel.org

- Validate user fence during creation (Brost)
- Fix use after free when client stats are captured (Umesh)
- SRIOV fixes (Michal)
- Runtime PM fixes (Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zr4KWF5nM1YvnT8H@intel.com

Merge tag 'drm-misc-fixes-2024-08-15' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

panel:
- dt-bindings style fixes

panel-orientation:
- add quirk for Any Loki Max
- add quirk for Any Loki Zero

rockchip:
- inno-hdmi: fix infoframe upload

v3d:
- fix OOB access in v3d_csd_job_run()
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240815131751.GA151031@linux.fritz.box

Lockdep reported a warning in Linux version 6.6:

[  414.344659] ================================
[  414.345155] WARNING: inconsistent lock state
[  414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[  414.346221] --------------------------------
[  414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[  414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[  414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[  414.351204] {IN-SOFTIRQ-W} state was registered at:
[  414.351751]   lock_acquire+0x18d/0x460
[  414.352218]   _raw_spin_lock_irqsave+0x39/0x60
[  414.352769]   __wake_up_common_lock+0x22/0x60
[  414.353289]   sbitmap_queue_wake_up+0x375/0x4f0
[  414.353829]   sbitmap_queue_clear+0xdd/0x270
[  414.354338]   blk_mq_put_tag+0xdf/0x170
[  414.354807]   __blk_mq_free_request+0x381/0x4d0
[  414.355335]   blk_mq_free_request+0x28b/0x3e0
[  414.355847]   __blk_mq_end_request+0x242/0xc30
[  414.356367]   scsi_end_request+0x2c1/0x830
[  414.345155] WARNING: inconsistent lock state
[  414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted
[  414.346221] --------------------------------
[  414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[  414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes:
[  414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[  414.351204] {IN-SOFTIRQ-W} state was registered at:
[  414.351751]   lock_acquire+0x18d/0x460
[  414.352218]   _raw_spin_lock_irqsave+0x39/0x60
[  414.352769]   __wake_up_common_lock+0x22/0x60
[  414.353289]   sbitmap_queue_wake_up+0x375/0x4f0
[  414.353829]   sbitmap_queue_clear+0xdd/0x270
[  414.354338]   blk_mq_put_tag+0xdf/0x170
[  414.354807]   __blk_mq_free_request+0x381/0x4d0
[  414.355335]   blk_mq_free_request+0x28b/0x3e0
[  414.355847]   __blk_mq_end_request+0x242/0xc30
[  414.356367]   scsi_end_request+0x2c1/0x830
[  414.356863]   scsi_io_completion+0x177/0x1610
[  414.357379]   scsi_complete+0x12f/0x260
[  414.357856]   blk_complete_reqs+0xba/0xf0
[  414.358338]   __do_softirq+0x1b0/0x7a2
[  414.358796]   irq_exit_rcu+0x14b/0x1a0
[  414.359262]   sysvec_call_function_single+0xaf/0xc0
[  414.359828]   asm_sysvec_call_function_single+0x1a/0x20
[  414.360426]   default_idle+0x1e/0x30
[  414.360873]   default_idle_call+0x9b/0x1f0
[  414.361390]   do_idle+0x2d2/0x3e0
[  414.361819]   cpu_startup_entry+0x55/0x60
[  414.362314]   start_secondary+0x235/0x2b0
[  414.362809]   secondary_startup_64_no_verify+0x18f/0x19b
[  414.363413] irq event stamp: 428794
[  414.363825] hardirqs last  enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200
[  414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50
[  414.365629] softirqs last  enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2
[  414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0
[  414.367425]
               other info that might help us debug this:
[  414.368194]  Possible unsafe locking scenario:
[  414.368900]        CPU0
[  414.369225]        ----
[  414.369548]   lock(&sbq->ws[i].wait);
[  414.370000]   <Interrupt>
[  414.370342]     lock(&sbq->ws[i].wait);
[  414.370802]
                *** DEADLOCK ***
[  414.371569] 5 locks held by kworker/u10:3/1152:
[  414.372088]  #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0
[  414.373180]  #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0
[  414.374384]  #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00
[  414.375342]  #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0
[  414.376377]  #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0
[  414.378607]
               stack backtrace:
[  414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6
[  414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[  414.381177] Workqueue: writeback wb_workfn (flush-253:0)
[  414.381805] Call Trace:
[  414.382136]  <TASK>
[  414.382429]  dump_stack_lvl+0x91/0xf0
[  414.382884]  mark_lock_irq+0xb3b/0x1260
[  414.383367]  ? __pfx_mark_lock_irq+0x10/0x10
[  414.383889]  ? stack_trace_save+0x8e/0xc0
[  414.384373]  ? __pfx_stack_trace_save+0x10/0x10
[  414.384903]  ? graph_lock+0xcf/0x410
[  414.385350]  ? save_trace+0x3d/0xc70
[  414.385808]  mark_lock.part.20+0x56d/0xa90
[  414.386317]  mark_held_locks+0xb0/0x110
[  414.386791]  ? __pfx_do_raw_spin_lock+0x10/0x10
[  414.387320]  lockdep_hardirqs_on_prepare+0x297/0x3f0
[  414.387901]  ? _raw_spin_unlock_irq+0x28/0x50
[  414.388422]  trace_hardirqs_on+0x58/0x100
[  414.388917]  _raw_spin_unlock_irq+0x28/0x50
[  414.389422]  __blk_mq_tag_busy+0x1d6/0x2a0
[  414.389920]  __blk_mq_get_driver_tag+0x761/0x9f0
[  414.390899]  blk_mq_dispatch_rq_list+0x1780/0x1ee0
[  414.391473]  ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10
[  414.392070]  ? sbitmap_get+0x2b8/0x450
[  414.392533]  ? __blk_mq_get_driver_tag+0x210/0x9f0
[  414.393095]  __blk_mq_sched_dispatch_requests+0xd99/0x1690
[  414.393730]  ? elv_attempt_insert_merge+0x1b1/0x420
[  414.394302]  ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10
[  414.394970]  ? lock_acquire+0x18d/0x460
[  414.395456]  ? blk_mq_run_hw_queue+0x637/0xa00
[  414.395986]  ? __pfx_lock_acquire+0x10/0x10
[  414.396499]  blk_mq_sched_dispatch_requests+0x109/0x190
[  414.397100]  blk_mq_run_hw_queue+0x66e/0xa00
[  414.397616]  blk_mq_flush_plug_list.part.17+0x614/0x2030
[  414.398244]  ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10
[  414.398897]  ? writeback_sb_inodes+0x241/0xcc0
[  414.399429]  blk_mq_flush_plug_list+0x65/0x80
[  414.399957]  __blk_flush_plug+0x2f1/0x530
[  414.400458]  ? __pfx___blk_flush_plug+0x10/0x10
[  414.400999]  blk_finish_plug+0x59/0xa0
[  414.401467]  wb_writeback+0x7cc/0x920
[  414.401935]  ? __pfx_wb_writeback+0x10/0x10
[  414.402442]  ? mark_held_locks+0xb0/0x110
[  414.402931]  ? __pfx_do_raw_spin_lock+0x10/0x10
[  414.403462]  ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[  414.404062]  wb_workfn+0x2b3/0xcf0
[  414.404500]  ? __pfx_wb_workfn+0x10/0x10
[  414.404989]  process_scheduled_works+0x432/0x13f0
[  414.405546]  ? __pfx_process_scheduled_works+0x10/0x10
[  414.406139]  ? do_raw_spin_lock+0x101/0x2a0
[  414.406641]  ? assign_work+0x19b/0x240
[  414.407106]  ? lock_is_held_type+0x9d/0x110
[  414.407604]  worker_thread+0x6f2/0x1160
[  414.408075]  ? __kthread_parkme+0x62/0x210
[  414.408572]  ? lockdep_hardirqs_on_prepare+0x297/0x3f0
[  414.409168]  ? __kthread_parkme+0x13c/0x210
[  414.409678]  ? __pfx_worker_thread+0x10/0x10
[  414.410191]  kthread+0x33c/0x440
[  414.410602]  ? __pfx_kthread+0x10/0x10
[  414.411068]  ret_from_fork+0x4d/0x80
[  414.411526]  ? __pfx_kthread+0x10/0x10
[  414.411993]  ret_from_fork_asm+0x1b/0x30
[  414.412489]  </TASK>

When interrupt is turned on while a lock holding by spin_lock_irq it
throws a warning because of potential deadlock.

blk_mq_prep_dispatch_rq
 blk_mq_get_driver_tag
  __blk_mq_get_driver_tag
   __blk_mq_alloc_driver_tag
    blk_mq_tag_busy -> tag is already busy
    // failed to get driver tag
 blk_mq_mark_tag_wait
  spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait)
  __add_wait_queue(wq, wait) -> wait queue active
  blk_mq_get_driver_tag
  __blk_mq_tag_busy
-> 1) tag must be idle, which means there can't be inflight IO
   spin_lock_irq(&tags->lock) -> lock B (hctx->tags)
   spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally
-> 2) context must be preempt by IO interrupt to trigger deadlock.

As shown above, the deadlock is not possible in theory, but the warning
still need to be fixed.

Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq.

Fixes: 4f1731df ("blk-mq: fix potential io hang by wrong 'wake_batch'")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240815024736.2040971-1-lilingfeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'amd-drm-fixes-6.11-2024-08-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.11-2024-08-14:

amdgpu:
- Fix MES ring buffer overflow
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP MST fix
- Cursor fixes
- JPEG fixes
- Context ops validation
- MES 12 fixes
- VCN 5.0 fix
- HDP fix
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814213846.1331827-1-alexander.deucher@amd.com

Merge tag 'perf-tools-fixes-for-v6.11-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Namhyung Kim:
 "The usual header file sync-ups and one more build fix:

   - Add README file to explain why we copy the headers

   - Sync UAPI and other header files with kernel source

   - Fix build on MIPS 32-bit"

* tag 'perf-tools-fixes-for-v6.11-2024-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf daemon: Fix the build on 32-bit architectures
  tools/include: Sync arm64 headers with the kernel sources
  tools/include: Sync x86 headers with the kernel sources
  tools/include: Sync filesystem headers with the kernel sources
  tools/include: Sync network socket headers with the kernel sources
  tools/include: Sync uapi/asm-generic/unistd.h with the kernel sources
  tools/include: Sync uapi/sound/asound.h with the kernel sources
  tools/include: Sync uapi/linux/perf.h with the kernel sources
  tools/include: Sync uapi/linux/kvm.h with the kernel sources
  tools/include: Sync uapi/drm/i915_drm.h with the kernel sources
  perf tools: Add tools/include/uapi/README

The fixdep binary is being compiled and linked in one step. While the
host linker flags are passed to the compiler the host compiler flags are
missed.

That leads to build errors at least on x86_64, arm64 and s390 as result
of the compiler vs linker flags inconsistency. For example, during RPM
package build redhat-hardened-ld script is provided to gcc, while
redhat-hardened-cc1 script is missed.

Provide both KBUILD_HOSTCFLAGS and KBUILD_HOSTLDFLAGS to avoid that.

Fixes: ea974028 ("tools build: Avoid circular .fixdep-in.o.cmd issues")
Closes: https://lore.kernel.org/lkml/99ae0d34-ed76-4ca0-a9fd-c337da33c9f9@leemhuis.info/Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240815072046.1002837-1-agordeev@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'md-6.11-20240815' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.11

Pull MD fix from Song:

"This patch fixes a potential data corruption in degraded raid0 array
 with slow (WriteMostly) drives. This issue was introduced in upstream
 6.9 kernel."

* tag 'md-6.11-20240815' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md/raid1: Fix data corruption for degraded array with slow disk

read_balance() will avoid reading from slow disks as much as possible,
however, if valid data only lands in slow disks, and a new normal disk
is still in recovery, unrecovered data can be read:

raid1_read_request
 read_balance
  raid1_should_read_first
  -> return false
  choose_best_rdev
  -> normal disk is not recovered, return -1
  choose_bb_rdev
  -> missing the checking of recovery, return the normal disk
 -> read unrecovered data

Root cause is that the checking of recovery is missing in
choose_bb_rdev(). Hence add such checking to fix the problem.

Also fix similar problem in choose_slow_rdev().

Cc: stable@vger.kernel.org
Fixes: 9f3ced79 ("md/raid1: factor out choose_bb_rdev() from read_balance()")
Fixes: dfa8ecd1 ("md/raid1: factor out choose_slow_rdev() from read_balance()")
Reported-and-tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Closes: https://lore.kernel.org/all/9952f532-2554-44bf-b906-4880b2e88e3a@o2.pl/Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240803091137.3197008-1-yukuai1@huaweicloud.comSigned-off-by: Song Liu <song@kernel.org>

Evan Green <evan@rivosinc.com> says:

The CPUPERF0 hwprobe key was documented and identified in code as
a bitmask value, but its contents were an enum. This produced
incorrect behavior in conjunction with the WHICH_CPUS hwprobe flag.
The first patch in this series fixes the bitmask/enum problem by
creating a new hwprobe key that returns the same data, but is
properly described as a value instead of a bitmask. The second patch
renames the value definitions in preparation for adding vector misaligned
access info. As of this version, the old defines are kept in place to
maintain source compatibility with older userspace programs.

* b4-shazam-merge:
  RISC-V: hwprobe: Add SCALAR to misaligned perf defines
  RISC-V: hwprobe: Add MISALIGNED_PERF key

Link: https://lore.kernel.org/r/20240809214444.3257596-1-evan@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The out-of-bounds access is reported by UBSAN:

[    0.000000] UBSAN: array-index-out-of-bounds in ../arch/riscv/kernel/vendor_extensions.c:41:66
[    0.000000] index -1 is out of range for type 'riscv_isavendorinfo [32]'
[    0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.11.0-rc2ubuntu-defconfig #2
[    0.000000] Hardware name: riscv-virtio,qemu (DT)
[    0.000000] Call Trace:
[    0.000000] [<ffffffff94e078ba>] dump_backtrace+0x32/0x40
[    0.000000] [<ffffffff95c83c1a>] show_stack+0x38/0x44
[    0.000000] [<ffffffff95c94614>] dump_stack_lvl+0x70/0x9c
[    0.000000] [<ffffffff95c94658>] dump_stack+0x18/0x20
[    0.000000] [<ffffffff95c8bbb2>] ubsan_epilogue+0x10/0x46
[    0.000000] [<ffffffff95485a82>] __ubsan_handle_out_of_bounds+0x94/0x9c
[    0.000000] [<ffffffff94e09442>] __riscv_isa_vendor_extension_available+0x90/0x92
[    0.000000] [<ffffffff94e043b6>] riscv_cpufeature_patch_func+0xc4/0x148
[    0.000000] [<ffffffff94e035f8>] _apply_alternatives+0x42/0x50
[    0.000000] [<ffffffff95e04196>] apply_boot_alternatives+0x3c/0x100
[    0.000000] [<ffffffff95e05b52>] setup_arch+0x85a/0x8bc
[    0.000000] [<ffffffff95e00ca0>] start_kernel+0xa4/0xfb6

The dereferencing using cpu should actually not happen, so remove it.

Fixes: 23c996fc ("riscv: Extend cpufeature.c to detect vendor extensions")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240814192619.276794-1-alexghiti@rivosinc.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Trusted keys unseal the key blob on load, but keep the sealed payload in
the blob field so that every subsequent read (export) will simply
convert this field to hex and send it to userspace.

With DCP-based trusted keys, we decrypt the blob encryption key (BEK)
in the Kernel due hardware limitations and then decrypt the blob payload.
BEK decryption is done in-place which means that the trusted key blob
field is modified and it consequently holds the BEK in plain text.
Every subsequent read of that key thus send the plain text BEK instead
of the encrypted BEK to userspace.

This issue only occurs when importing a trusted DCP-based key and
then exporting it again. This should rarely happen as the common use cases
are to either create a new trusted key and export it, or import a key
blob and then just use it without exporting it again.

Fix this by performing BEK decryption and encryption in a dedicated
buffer. Further always wipe the plain text BEK buffer to prevent leaking
the key via uninitialized memory.

Cc: stable@vger.kernel.org # v6.10+
Fixes: 2e8a0f40 ("KEYS: trusted: Introduce NXP DCP-backed trusted keys")
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>