- 02 Apr, 2021 33 commits
-
-
Wan Jiabing authored
struct btf_type is declared twice. One is declared at 35th line. The below one is not needed, hence remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210401072037.995849-1-wanjiabing@vivo.com
-
Wan Jiabing authored
struct bpf_prog is declared twice. There is one declaration which is independent on the macro at 18th line. So the below one is not needed though. Remove the duplicate. Signed-off-by:
-
He Fengqing authored
'stack' parameter is not used in ___bpf_prog_run() after f696b8f4 ("bpf: split bpf core interpreter"), the base address have been set to FP reg. So consequently remove it. Signed-off-by:
He Fengqing <hefengqing@huawei.com> Signed-off-by:
-
John Fastabend authored
With a relatively recent clang master branch test_map skips a section, libbpf: elf: skipping unrecognized data section(5) .rodata.str1.1 the cause is some pointless strings from bpf_printks in the BPF program loaded during testing. After just removing the prints to fix above error Daniel points out the program is a bit pointless and could be simply the empty program returning SK_PASS. Here we do just that and return simply SK_PASS. This program is used with test_maps selftests to test insert/remove of a program into the sockmap and sockhash maps. Its not testing actual functionality of the TCP sockmap programs, these are tested from test_sockmap. So we shouldn't lose in test coverage and fix above warnings. This original test was added before test_sockmap existed and has been copied around ever since, clean it up now. Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Group all the often used fields in the first cache line, to reduce cache line misses. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Order fields to increase locality for most used protocols. udplite and icmp are moved at the end. Same for proc_net_devsnmp6 which is not used in fast path. This potentially saves one cache line miss for typical TCP/UDP over IPv4/IPv6. Signed-off-by:
-
Dan Carpenter authored
If the "type_a->nfcid_len" is too large then it would lead to memory corruption in pn533_target_found_type_a() when we do: memcpy(nfc_tgt->nfcid1, tgt_type_a->nfcid_data, nfc_tgt->nfcid1_len); Fixes: c3b1e1e8 ("NFC: Export NFCID1 from pn533") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add rx copybreak support DMA unmapping, allocating a new buffer and DMA mapping it back on the refill path is really not that efficient. Proper buffer recycling (page pool, flipping the page and using the other half) cannot be done for DPAA2 since it's not a ring based controller but it rather deals with multiple queues which all get their buffers from the same buffer pool on Rx. To circumvent these limitations, add support for Rx copybreak in dpaa2-eth. Below you can find a summary of the tests that were run to end up with the default rx copybreak value of 512. A bit about the setup - a LS2088A SoC, 8 x Cortex A72 @ 1.8GHz, IPfwd zero loss test @ 20Gbit/s throughput. I tested multiple frame sizes to get an idea where is the break even point. Here are 2 sets of results, (1) is the baseline and (2) is just allocating a new skb for all frames sizes received (as if the copybreak was even to the MTU). All numbers are in Mpps. 64 128 256 512 640 768 896 (1) 3.23 3.23 3.24 3.21 3.1 2.76 2.71 (2) 3.95 3.88 3.79 3.62 3.3 3.02 2.65 It seems that even for 512 bytes frame sizes it's comfortably better when allocating a new skb. After that, we see diminishing rewards or even worse. Changes in v2: - properly marked dpaa2_eth_copybreak as static ==================== Signed-off-by: -
Ioana Ciornei authored
It's useful, especially for debugging purposes, to have the Rx copybreak value changeable at runtime. Export it as an ethtool tunable. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Ioana Ciornei authored
DMA unmapping, allocating a new buffer and DMA mapping it back on the refill path is really not that efficient. Proper buffer recycling (page pool, flipping the page and using the other half) cannot be done for DPAA2 since it's not a ring based controller but it rather deals with multiple queues which all get their buffers from the same buffer pool on Rx. To circumvent these limitations, add support for Rx copybreak. For small sized packets instead of creating a skb around the buffer in which the frame was received, allocate a new sk buffer altogether, copy the contents of the frame and release the initial page back into the buffer pool. Signed-off-by:
-
Ioana Ciornei authored
Rename the dpaa2_eth_xdp_release_buf function into dpaa2_eth_recycle_buf since in the next patches we'll be using the same recycle mechanism for the normal stack path beside for XDP_DROP. Also, rename the array which holds the buffers to be recycled so that it does not have any reference to XDP. Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== MPTCP: Miscellaneous changes Here is a collection of patches from the MPTCP tree: Patches 1 and 2 add some helpful MIB counters for connection information. Patch 3 cleans up some unnecessary checks. Patch 4 is a new feature, support for the MP_TCPRST option. This option is used when resetting one subflow within a MPTCP connection, and provides a reason code that the recipient can use when deciding how to adapt to the lost subflow. Patches 5-7 update the existing MPTCP selftests to improve timeout handling and to share better information when tests fail. ==================== Signed-off-by: -
Matthieu Baerts authored
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once! Here we provide more details in case of errors with mptcp_join.sh script like it was done with mptcp_connect.sh, see commit 767389c8 ("selftests: mptcp: dump more info on errors") Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Matthieu Baerts authored
Not to be impacted by packets sent between sub-tests. Signed-off-by:
-
Matthieu Baerts authored
'mptcp_connect' already has a timeout for poll() but in some cases, it is not enough. With "timeout" tool, we will force the command to fail if it doesn't finish on time. Thanks to that, the script will continue and display details about the current state before marking the test as failed. Displaying this state is very important to be able to understand the issue. Best to have our CI reporting the issue than just "the test hanged". Note that in mptcp_connect.sh, we were using a long timeout to validate the fact we cannot create a socket if a sysctl is set. We don't need this timeout. In diag.sh, we want to send signals to mptcp_connect instances that have been started in the netns. But we cannot send this signal to 'timeout' otherwise that will stop the timeout and messages telling us SIGUSR1 has been received will be printed. Instead of trying to find the right PID and storing them in an array, we can simply use the output of 'ip netns pids' which is all the PIDs we want to send signal to. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160Signed-off-by:
-
Florian Westphal authored
The MPTCP reset option allows to carry a mptcp-specific error code that provides more information on the nature of a connection reset. Reset option data received gets stored in the subflow context so it can be sent to userspace via the 'subflow closed' netlink event. When a subflow is closed, the desired error code that should be sent to the peer is also placed in the subflow context structure. If a reset is sent before subflow establishment could complete, e.g. on HMAC failure during an MP_JOIN operation, the mptcp skb extension is used to store the reset information. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Paolo Abeni authored
Currently we explicitly check for the first subflow being NULL in a couple of places, even if we don't need any special actions in such scenario. Just drop the unneeded checks, to avoid confusion. Signed-off-by:
-
Paolo Abeni authored
We are not currently tracking the active MPTCP connection attempts. Let's add the related counters. Signed-off-by:
-
Paolo Abeni authored
If the MPTCP protocol is unable to create a new token, the socket fallback to plain TCP, let's keep track of such events via a specific MIB. Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: add PTP and hw clock support This patchset adds support for accessing the DSC hardware clock and for offloading PTP timestamping. Tx packet timestamping happens through a separate Tx queue set up with expanded completion descriptors that can report the timestamp. Rx timestamping can happen either on all queues, or on a separate timestamping queue when specific filtering is requested. Again, the timestamps are reported with the expanded completion descriptors. The timestamping offload ability is advertised but not enabled until an OS service asks for it. At that time the driver's queues are reconfigured to use the different completion descriptors and the private processing queues as needed. Reading the raw clock value comes through a new pair of values in the device info registers in BAR0. These high and low values are interpreted with help from new clock mask, mult, and shift values in the device identity information. First we add the ability to detect new queue features, then the handling of the new descriptor sizes. After adding the new interface structures, we start adding the support code, saving the advertising to the stack for last. ==================== Signed-off-by: -
Shannon Nelson authored
Let the network stack know we've got support for timestamping the packets. Signed-off-by:
Allen Hubbe <allenbh@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Add the new hwstamp stats to our ethtool stats output. Signed-off-by:
-
Shannon Nelson authored
Add the get_ts_info() callback for ethtool support of timestamping information. Signed-off-by:
-
Shannon Nelson authored
The Tx and Rx timestamped packets are handled through separate queues. Here we set them up, service them, and tear them down along with the normal Tx and Rx queues. Signed-off-by:
-
Shannon Nelson authored
We do hardware timestamping through a separate Tx queue, and optionally through a separate Rx queue. These queues are allocated, freed, and tracked separately from the basic queue arrays. Signed-off-by:
-
Shannon Nelson authored
Add handling of the new Rx packet classification filter type. This simple bit of classification allows for steering packets to a separate Rx queue for processing. Signed-off-by:
-
Shannon Nelson authored
These are changes to compile and link the new code, but no new feature support is available or advertised yet. Signed-off-by:
-
Shannon Nelson authored
This adds the file of code for supporting Tx and Rx hardware timestamps and the raw clock interface, but does not yet link it in for compiling or use. Signed-off-by:
-
Shannon Nelson authored
Split the wait part out of adminq_post_wait() into a separate function so that a caller can have finer grain control over the sequencing of operations and locking. Signed-off-by:
-
Shannon Nelson authored
The interface for hardware timestamping includes a new FW request, device identity fields, Tx and Rx queue feature bits, a new Rx filter type, the beginnings of Rx packet classifications, and hardware timestamp registers. If the IONIC_ETH_HW_TIMESTAMP bit is shown in the ionic_lif_config features bit string, then we have support for the hw clock registers. If the IONIC_RXQ_F_HWSTAMP and IONIC_TXQ_F_HWSTAMP features are shown in the ionic_q_identity features, then the queues can support HW timestamps on packets. Signed-off-by:
-
Shannon Nelson authored
In preparating for hardware timestamping, we need to support large Tx and Rx completion descriptors. Here we add the new queue feature ids and handling for the completion descriptor sizes. We only are adding support for the Rx 2x sized completion descriptors in the general Rx queues for now as we will be using it for PTP Rx support, and we don't have an immediate use for the large descriptors in the general Tx queues yet; it will be used in a special Tx queues added in one of the next few patches. Signed-off-by:
-
Shannon Nelson authored
Add queue feature extensions to prepare for features that can be queue specific, in addition to the general queue features already defined. While we're here, change the existing feature ids from #defines to enum. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-04-01 The following pull-request contains BPF updates for your *net-next* tree. We've added 68 non-merge commits during the last 7 day(s) which contain a total of 70 files changed, 2944 insertions(+), 1139 deletions(-). The main changes are: 1) UDP support for sockmap, from Cong. 2) Verifier merge conflict resolution fix, from Daniel. 3) xsk selftests enhancements, from Maciej. 4) Unstable helpers aka kernel func calling, from Martin. 5) Batches ops for LPM map, from Pedro. 6) Fix race in bpf_get_local_storage, from Yonghong. ==================== Signed-off-by:
-
- 01 Apr, 2021 7 commits
-
-
Phillip Potter authored
Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=00371c73c72f72487c1d0bfe0cc9d00de339d5aa Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com Signed-off-by:
Phillip Potter <phil@philpotter.co.uk> Signed-off-by:
-
Florian Fainelli authored
All Gigabit PHYs use the same register layout as far as fetching statistics goes. Fast Ethernet PHYs do not all support statistics, and the BCM54616S would require some switching between the coper and fiber modes to fetch the appropriate statistics which is not supported yet. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Otto Hollmann authored
If there is overlapp between ip_local_port_range and ip_local_reserved_ports with a huge reserved block, it will affect probability of selecting ephemeral ports, see file net/ipv4/inet_hashtables.c:723 int __inet_hash_connect( ... for (i = 0; i < remaining; i += 2, port += 2) { if (unlikely(port >= high)) port -= remaining; if (inet_is_local_reserved_port(net, port)) continue; E.g. if there is reserved block of 10000 ports, two ports right after this block will be 5000 more likely selected than others. If this was intended, we can/should add note into documentation as proposed in this commit, otherwise we should think about different solution. One option could be mapping table of continuous port ranges. Second option could be letting user to modify step (port+=2) in above loop, e.g. using new sysctl parameter. Signed-off-by:Otto Hollmann <otto.hollmann@suse.com> Signed-off-by:
-
Yang Yingliang authored
Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Lu Wei authored
Fix some typos. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Lu Wei <luwei32@huawei.com> Signed-off-by:
-
Wan Jiabing authored
struct smc_clc_msg_local is declared twice. One is declared at 301st line. The blew one is not needed. Remove the duplicate. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Wan Jiabing authored
struct ctl_table_header is declared twice. One is declared at 46th line. The blew one is not needed. Remove the duplicate. Signed-off-by:
-
