Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm80xx_hwi.c:918: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:954: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm80xx_hwi.c:1717: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_enable'
 drivers/scsi/pm8001/pm80xx_hwi.c:1735: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_interrupt_disable'
 drivers/scsi/pm8001/pm80xx_hwi.c:4830: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_start_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4872: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_stop_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_ha' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'pm8001_dev' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4892: warning: Function parameter or member 'flag' not described in 'pm80xx_chip_reg_dev_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phyId' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Function parameter or member 'phy_op' not described in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'num' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:4966: warning: Excess function parameter 'phy_id' description in 'pm80xx_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Function parameter or member 'vec' not described in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'irq' description in 'pm80xx_chip_isr'
 drivers/scsi/pm8001/pm80xx_hwi.c:5006: warning: Excess function parameter 'stat' description in 'pm80xx_chip_isr'

Link: https://lore.kernel.org/r/20200721164148.2617584-18-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Provide lots of missing descriptions, remove some superfluous ones
(probably due to docrot) and demote one header which does not provide many
descriptions, and the ones it does provide are incorrect.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_hwi.c:339: warning: Function parameter or member 'number' not described in 'update_inbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:360: warning: Function parameter or member 'number' not described in 'update_outbnd_queue_table'
 drivers/scsi/pm8001/pm8001_hwi.c:480: warning: Function parameter or member 'interval' not described in 'mpi_set_open_retry_interval_reg'
 drivers/scsi/pm8001/pm8001_hwi.c:1238: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1256: warning: Function parameter or member 'int_vec_idx' not described in 'pm8001_chip_msix_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:1270: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_enable'
 drivers/scsi/pm8001/pm8001_hwi.c:1284: warning: Function parameter or member 'vec' not described in 'pm8001_chip_interrupt_disable'
 drivers/scsi/pm8001/pm8001_hwi.c:4508: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_start_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4544: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_stop_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4564: warning: Function parameter or member 'flag' not described in 'pm8001_chip_reg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4624: warning: Function parameter or member 'device_id' not described in 'pm8001_chip_dereg_dev_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phyId' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Function parameter or member 'phy_op' not described in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'num' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4650: warning: Excess function parameter 'phy_id' description in 'pm8001_chip_phy_ctl_req'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Function parameter or member 'vec' not described in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'irq' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4687: warning: Excess function parameter 'stat' description in 'pm8001_chip_isr'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'pm8001_dev' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'task_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Function parameter or member 'cmd_tag' not described in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4727: warning: Excess function parameter 'task' description in 'pm8001_chip_abort_task'
 drivers/scsi/pm8001/pm8001_hwi.c:4966: warning: Function parameter or member 'tag' not described in 'pm8001_chip_fw_flash_update_build'

Link: https://lore.kernel.org/r/20200721164148.2617584-17-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also remove 'tstate' which became unused after this patch.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_handle_seqint’:
 drivers/scsi/aic7xxx/aic79xx_core.c:1907:32: warning: variable ‘targ_info’ set but not used [-Wunused-but-set-variable]
 1907 | struct ahd_initiator_tinfo *targ_info;
 | ^~~~~~~~~
 drivers/scsi/pm8001/pm8001_hwi.c: In function ‘mpi_set_phys_g3_with_ssc’:
 drivers/scsi/pm8001/pm8001_hwi.c:413:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]
 413 | u32 value, offset, i;
 | ^~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-16-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

'qla4_83xx_reg_tbl' is only used in 'drivers/scsi/qla4xxx/ql4_os.c', move
it there.

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_init.c:9:
 At top level:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 In file included from drivers/scsi/qla4xxx/ql4_def.h:46,
 from drivers/scsi/qla4xxx/ql4_mbx.c:9:
 drivers/scsi/qla4xxx/ql4_83xx.h:90:23: warning: ‘qla4_83xx_reg_tbl’ defined but not used [-Wunused-const-variable=]
 90 | static const uint32_t qla4_83xx_reg_tbl[] = {
 | ^~~~~~~~~~~~~~~~~
 [...]
 NB: Lots of these - snipped for brevity.

Link: https://lore.kernel.org/r/20200721164148.2617584-15-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

pci_set_mwi() has 'warn_unused_result' so the result should be checked.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]

And if 'status' is removed:

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
 drivers/scsi/qla4xxx/ql4_init.c:666:2: warning: ignoring return value of ‘pci_set_mwi’, declared with attribute warn_unused_result [-Wunused-result]
 666 | pci_set_mwi(ha->pdev);
 | ^~~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-14-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
 drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200721164148.2617584-13-lee.jones@linaro.org
Cc: QLogic-Storage-Upstream@qlogic.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Clean-up some whitespace issues too whilst we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_ctl.c:102: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:331: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show'
 drivers/scsi/pm8001/pm8001_ctl.c:400: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:433: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show'
 drivers/scsi/pm8001/pm8001_ctl.c:464: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show'
 drivers/scsi/pm8001/pm8001_ctl.c:623: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show'

Link: https://lore.kernel.org/r/20200721164148.2617584-12-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Functions must follow directly after the header that documents them.

Fixes the following W=1 kernel build warning(s):

from  drivers/scsi/pm8001/pm8001_sas.c:41:
inlined from ‘pm8001_issue_ssp_tmf’ at  drivers/scsi/pm8001/pm8001_sas.c:919:2:
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Function parameter or member 'pm8001_dev' not described in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'task' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'num' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'gfp_flags' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'is_tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'tmf' description in 'DEV_IS_GONE'
 drivers/scsi/pm8001/pm8001_sas.c:583: warning: Function parameter or member 'device_id' not described in 'pm8001_find_dev'
 drivers/scsi/pm8001/pm8001_sas.c:1000: warning: Function parameter or member 'dev' not described in 'pm8001_I_T_nexus_reset'

Link: https://lore.kernel.org/r/20200721164148.2617584-11-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_tmf.c:685: warning: Function parameter or member 'task' not described in 'asd_query_task'

Link: https://lore.kernel.org/r/20200721164148.2617584-9-lee.jones@linaro.org
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p5' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'p6' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'status' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r1' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r2' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r3' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Function parameter or member 'r4' not described in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:203: warning: Excess function parameter 'ret' description in 'src_sync_cmd'
 drivers/scsi/aacraid/src.c:609: warning: Function parameter or member 'dev' not described in 'aac_src_ioremap'
 drivers/scsi/aacraid/src.c:639: warning: Function parameter or member 'dev' not described in 'aac_srcv_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-8-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Kerneldoc expects attributes/parameters to be in '@*.: ' format.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic94xx/aic94xx_dev.c:246: warning: Function parameter or member 'dev' not described in 'asd_init_sata_pm_port_ddb'
 drivers/scsi/aic94xx/aic94xx_dev.c:290: warning: Function parameter or member 'dev' not described in 'asd_init_sata_pm_ddb'

Link: https://lore.kernel.org/r/20200721164148.2617584-7-lee.jones@linaro.org
Cc: Luben Tuikov <luben_tuikov@adaptec.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/nark.c:31: warning: Function parameter or member 'dev' not described in 'aac_nark_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-6-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

And clean-up a couple of whitespace issues while we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/rkt.c:64: warning: Function parameter or member 'dev' not described in 'aac_rkt_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-5-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Also clean-up some white space issues while we're here.

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p2' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p3' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p4' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p5' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'p6' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r1' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r2' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r3' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:147: warning: Function parameter or member 'r4' not described in 'sa_sync_cmd'
 drivers/scsi/aacraid/sa.c:290: warning: Function parameter or member 'dev' not described in 'aac_sa_ioremap'

Link: https://lore.kernel.org/r/20200721164148.2617584-4-lee.jones@linaro.org
Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com>
Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_dump_sglist’:
 drivers/scsi/aic7xxx/aic79xx_core.c:1738:14: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
 1738 | uint32_t len;
 | ^~~
 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_handle_seqint’:
 drivers/scsi/aic7xxx/aic79xx_core.c:1911:26: warning: variable ‘tinfo’ set but not used [-Wunused-but-set-variable]
 1911 | struct ahd_transinfo *tinfo;
 | ^~~~~
 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_handle_transmission_error’:
 drivers/scsi/aic7xxx/aic79xx_core.c:2672:8: warning: variable ‘lqistat2’ set but not used [-Wunused-but-set-variable]
 2672 | u_int lqistat2;
 | ^~~~~~~~
 drivers/scsi/aic7xxx/aic79xx_core.c: In function ‘ahd_update_pending_scbs’:
 drivers/scsi/aic7xxx/aic79xx_core.c:4221:31: warning: variable ‘tinfo’ set but not used [-Wunused-but-set-variable]
 4221 | struct ahd_initiator_tinfo *tinfo;
 | ^~~~~

Link: https://lore.kernel.org/r/20200721164148.2617584-3-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to LKP, commit 18bc435e ("scsi: arcmsr: Remove some set but
unused variables") can be furthered to remove the entire statement and not
just the unused variable read into.

Snipped LKP report:

 config: x86_64-randconfig-m001-20200719
 compiler: gcc-9 (Debian 9.3.0-14) 9.3.0

 New smatch warnings:
  drivers/scsi/arcmsr/arcmsr_hba.c:1490 arcmsr_done4abort_postqueue() warn: statement has no effect 8
  drivers/scsi/arcmsr/arcmsr_hba.c:2459 arcmsr_hbaD_postqueue_isr() warn: statement has no effect 8
  drivers/scsi/arcmsr/arcmsr_hba.c:3526 arcmsr_hbaD_polling_ccbdone() warn: statement has no effect 8

 1a4f550a Nick Cheng  2007-09-13  1401  static void arcmsr_done4abort_postqueue(struct AdapterControlBlock *acb)
 1a4f550a Nick Cheng  2007-09-13  1402  {
 [...]
 18bc435e Lee Jones   2020-07-13 @1490                             pmu->done_qbuffer[doneq_index & 0xFFF].addressHigh;
                                                                         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 Delete this line.
 [...]

Link: https://lore.kernel.org/r/20200721164148.2617584-2-lee.jones@linaro.org
Cc: support@areca.com.tw
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes coccicheck warning:

./drivers/scsi/dpt_i2o.c:3070:11-29: WARNING:
 dma_alloc_coherent use in sys_tbl already zeroes out memory, so memset is not needed
./drivers/scsi/dpt_i2o.c:2780:10-28: WARNING:
 dma_alloc_coherent use in status already zeroes out memory, so memset is not needed
./drivers/scsi/dpt_i2o.c:2834:20-38: WARNING:
 dma_alloc_coherent use in pHba -> reply_pool already zeroes out memory, so memset is not needed
./drivers/scsi/dpt_i2o.c:1328:10-28: WARNING:
 dma_alloc_coherent use in status already zeroes out memory, so memset is not needed

Link: https://lore.kernel.org/r/20200718123224.1202-1-wanghai38@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

No need to allocate buffer every loop iteration. Allocate buffer once and
reuse it.

Link: https://lore.kernel.org/r/20200717090921.29243-2-yebin10@huawei.comSigned-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The scsi_host_block() case was missing in commit 4dea170f ("scsi: core:
Fix incorrect usage of shost_for_each_device").

Link: https://lore.kernel.org/r/20200717090921.29243-1-yebin10@huawei.com
Fixes: 2bb95584 ("scsi: core: add scsi_host_(block,unblock) helper function")
Fixes: 4dea170f ("scsi: core: Fix incorrect usage of shost_for_each_device")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi_host_find_tag() is used by the drivers to return a scsi command based
on the command tag. Typically it's used from the interrupt handler to fetch
the command associated with a value returned from hardware. Some drivers
like fnic or qla4xxx, however, also use it also to traverse outstanding
commands.  With the current implementation scsi_host_find_tag() will return
commands even if they are not started (i.e. passed to the driver).  This
will result in random errors with those drivers.  With this patch
scsi_host_find_tag() will only return 'started' commands (i.e. commands
which have been passed to the drivers) thus avoiding the above issue.  The
other use cases will be unaffected as the interrupt handler naturally will
only ever return 'started' requests.

Link: https://lore.kernel.org/r/20200622063022.67891-1-hare@suse.deSigned-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use eth_zero_addr() to clear mac address insetad of memset().

Link: https://lore.kernel.org/r/1595234344-13955-1-git-send-email-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use eth_broadcast_addr() to assign broadcast address insetad of memset().

Link: https://lore.kernel.org/r/1595233498-13628-1-git-send-email-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The variable 'status' is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Link: https://lore.kernel.org/r/20200723142614.991416-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

'tdata' pointer will never be NULL so remove NULL checks.

Link: https://lore.kernel.org/r/1595505391-3335-1-git-send-email-varun@chelsio.comReported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus
results in EH measures and a panic:

[   25.499838] mesh: configured for synchronous 5 MB/s
[   25.787154] mesh: performing initial bus reset...
[   29.867115] scsi host0: MESH
[   29.929527] mesh: target 0 synchronous at 3.6 MB/s
[   29.998763] scsi 0:0:0:0: Direct-Access     CONNER   CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS
[   31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB)
[   32.070975] sd 0:0:0:0: [sda] Write Protect is off
[   32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08
[   32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.332708]  sda: [mac] sda1 sda2 sda3
[   32.417733] sd 0:0:0:0: [sda] Attached SCSI disk
... snip ...
[   76.687067] mesh_abort((ptrval))
[   76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   76.810798]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   76.880720]     dma stat=84e0 cmdptr=1f73d000
[   76.941387]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.005567]     dma_st=1 dma_ct=0 n_msgout=0
[   77.065456]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.130512] mesh_abort((ptrval))
[   77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval)
[   77.255594]     ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85
[   77.325778]     dma stat=84e0 cmdptr=1f73d000
[   77.387239]     phase=4 msgphase=0 conn_tgt=0 data_ptr=24576
[   77.453665]     dma_st=1 dma_ct=0 n_msgout=0
[   77.515900]     target 0: req=(ptrval) goes_out=0 saved_ptr=0
[   77.582902] mesh_host_reset
[   88.187083] Kernel panic - not syncing: mesh: double DMA start !
[   88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1
[   88.323302] Call Trace:
[   88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable)
[   88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414
[   88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70
[   88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384
[   88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8
[   88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178
[   88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8
[   88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520
[   88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8
[   88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c
[   89.044112] Rebooting in 180 seconds..

In theory, a panic can happen after a bus or host reset with dma_started
flag set. Fix this by halting the DMA before reinitializing the host.
Don't assume that ms->current_req is set when halt_dma() is invoked as it
may not hold for bus or host reset.

BTW, this particular Conner drive can be made to work by inhibiting
disconnect/reselect with 'mesh.resel_targets=0'.

Link: https://lore.kernel.org/r/3952bc691e150a7128b29120999b6092071b039a.1595460351.git.fthain@telegraphics.com.au
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: Paul Mackerras <paulus@ozlabs.org>
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The variable 'res' is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is redundant
and can be removed.

Link: https://lore.kernel.org/r/20200722154404.959267-1-colin.king@canonical.comReviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unused value")

libata currently attempts to reset even if the SATA disk is unplugged.  To
avoid the meaningless reset of a missing disk, libsas should report offline
status to libata. libata already provides a .prereset callback for this
purpose. This is called by ata_eh_reset() and can be used to influence
whether a reset attempt should be made.

Add sas_ata_preset callback to check status of phy and disk. If the disk is
already offline or phy is disabled, we return -ENOENT to libata to avoid
the reset.

Link: https://lore.kernel.org/r/1595408643-63011-3-git-send-email-luojiaxing@huawei.comReviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

sas_sata_ops uses ata_std_postreset as .postreset callback. However,
ata_std_postreset() calls sata_scr_read()/sata_scr_write() which need to
access the ATA SCR register. This register not available in the libsas case
and the functions always return -EOPNOTSUPP.

Drop the .postreset callback.

Link: https://lore.kernel.org/r/1595408643-63011-2-git-send-email-luojiaxing@huawei.comReviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Since commit 317aeb83 ("scsi: lpfc: Add blk_io_poll support for latency
improvment"), the lpfc driver depends on CPUFREQ. Without it, builds fail
with

drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_init_idle_stat_hb':
drivers/scsi/lpfc/lpfc_sli.c:7329:26: error:
	implicit declaration of function 'get_cpu_idle_time'

Add the missing dependency.

Link: https://lore.kernel.org/r/20200722023027.36866-1-linux@roeck-us.net
Fixes: 317aeb83 ("scsi: lpfc: Add blk_io_poll support for latency improvment")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <jsmart2021@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove superfluous breaks, as there is a "return" before them.

Link: https://lore.kernel.org/r/1594724371-11677-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove superfluous breaks, as there is a "return" before them.

Link: https://lore.kernel.org/r/1594724367-11593-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 05d18ae1 ("scsi: pm: Balance pm_only counter of request queue
during system resume") fixed a problem in the block layer's runtime-PM
code: blk_set_runtime_active() failed to call blk_clear_pm_only().
However, the commit's implementation was awkward; it forced the SCSI
system-resume handler to choose whether to call blk_post_runtime_resume()
or blk_set_runtime_active(), depending on whether or not the SCSI device
had previously been runtime suspended.

This patch simplifies the situation considerably by adding the missing
function call directly into blk_set_runtime_active() (under the condition
that the queue is not already in the RPM_ACTIVE state).  This allows the
SCSI routine to revert back to its original form.  Furthermore, making this
change reveals that blk_post_runtime_resume() (in its success pathway) does
exactly the same thing as blk_set_runtime_active().  The duplicate code is
easily removed by making one routine call the other.

No functional changes are intended.

Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu
CC: Can Guo <cang@codeaurora.org>
CC: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add support for Qualcomm Inline Crypto Engine (ICE) to ufs-qcom.

The standards-compliant parts, such as querying the crypto capabilities and
enabling crypto for individual UFS requests, are already handled by
ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
However, ICE requires vendor-specific init, enable, and resume logic, and
it requires that keys be programmed and evicted by vendor-specific SMC
calls.  Make the ufs-qcom driver handle these details.

I tested this on Dragonboard 845c, which is a publicly available
development board that uses the Snapdragon 845 SoC and runs the upstream
Linux kernel.  This is the same SoC used in the Pixel 3 and Pixel 3 XL
phones.  This testing included (among other things) verifying that the
expected ciphertext was produced, both manually using ext4 encryption and
automatically using a block layer self-test I've written.

I've also tested that this driver works nearly as-is on the Snapdragon 765
and Snapdragon 865 SoCs.  And others have tested it on Snapdragon 850,
Snapdragon 855, and Snapdragon 865 (see the Tested-by tags).

This is based very loosely on the vendor-provided driver in the kernel
source code for the Pixel 3, but I've greatly simplified it.  Also, for now
I've only included support for major version 3 of ICE, since that's all I
have the hardware to test with the mainline kernel.  Plus it appears that
version 3 is easier to use than older versions of ICE.

For now, only allow using AES-256-XTS.  The hardware also declares support
for AES-128-XTS, AES-{128,256}-ECB, and AES-{128,256}-CBC (BitLocker
variant).  But none of these others are really useful, and they'd need to
be individually tested to be sure they worked properly.

This commit also changes the name of the loadable module from "ufs-qcom" to
"ufs_qcom", as this is necessary to compile it from multiple source files
(unless we were to rename ufs-qcom.c).

Link: https://lore.kernel.org/r/20200710072013.177481-6-ebiggers@kernel.org
Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630
Tested-by: Thara Gopinath <thara.gopinath@linaro.org> # db845c, sm8150-mtp, sm8250-mtp
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

On Snapdragon SoCs, the Linux kernel isn't permitted to directly access the
standard UFS crypto configuration registers.  Instead, programming and
evicting keys must be done through vendor-specific SMC calls.

To support this hardware, add a ->program_key() method to 'struct
ufs_hba_variant_ops'.  This allows overriding the UFS standard key
programming / eviction procedure.

Link: https://lore.kernel.org/r/20200710072013.177481-5-ebiggers@kernel.orgReviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In preparation for adding another optional register range to the ufs-qcom
driver, name the existing optional register range "dev_ref_clk_ctrl_mem".
This allows the driver to refer to the optional register ranges by name
rather than index.

No device-tree files actually have to be updated due to this change, since
none of them actually declares these registers.

Link: https://lore.kernel.org/r/20200710072013.177481-3-ebiggers@kernel.orgReviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add support for the Inline Crypto Engine (ICE) key programming interface
that's needed for the ufs-qcom driver to use inline encryption on
Snapdragon SoCs.  This interface consists of two SCM calls: one to program
a key into a keyslot, and one to invalidate a keyslot.

Although the UFS specification defines a standard way to do this, on these
SoCs the Linux kernel isn't permitted to access the needed crypto
configuration registers directly; these SCM calls must be used instead.

Link: https://lore.kernel.org/r/20200710072013.177481-2-ebiggers@kernel.orgAcked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

ahd_linux_queue_abort_cmd() calls ahd_save_modes() without calling
ahd_restore_modes() before exiting.

Link: https://lore.kernel.org/r/20200714160301.4482-1-hare@suse.deSigned-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

To avoid a warning in free_irq, clear the affinity hint.

Link: https://lore.kernel.org/r/20200709133144.8363-1-thenzl@redhat.com
Fixes: f0b9e7bd ("scsi: megaraid_sas: Set affinity for high IOPS reply queues")
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Link: https://lore.kernel.org/r/159528198909.24772.9189002306398058371.stgit@brunhildaReviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The controller can become slow to respond to SCSI INQUIRY requests
resulting in the SCSI midlayer offlining the controller device.

Increase the timeout value for commands sent to the controller device.

Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhildaReviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>