Fix for the x86_64 kernel mapping code.  Without this patch the update path
only inits one pmd_page worth of memory and tramples any entries on it.  now
the calling convention to phys_pmd_init and phys_init is to always pass a
[pmd/pud] page not an offset within a page.

Signed-off-by: Keith Mannthey<kmannth@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

Implement pause_on_oops() on x86_64.

AK: I redid the patch to do the oops_enter/exit in the existing
oops_begin()/end(). This makes it much shorter.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>

Right now the kernel on x86-64 has a 100% lazy fpu behavior: after *every*
context switch a trap is taken for the first FPU use to restore the FPU
context lazily.  This is of course great for applications that have very
sporadic or no FPU use (since then you avoid doing the expensive
save/restore all the time).  However for very frequent FPU users...  you
take an extra trap every context switch.

The patch below adds a simple heuristic to this code: After 5 consecutive
context switches of FPU use, the lazy behavior is disabled and the context
gets restored every context switch.  If the app indeed uses the FPU, the
trap is avoided.  (the chance of the 6th time slice using FPU after the
previous 5 having done so are quite high obviously).

After 256 switches, this is reset and lazy behavior is returned (until
there are 5 consecutive ones again).  The reason for this is to give apps
that do longer bursts of FPU use still the lazy behavior back after some
time.

[akpm@osdl.org: place new task_struct field next to jit_keyring to save space]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

This patch enables ACPI based physical CPU hotplug support for x86_64.
Implements acpi_map_lsapic() and acpi_unmap_lsapic() to support physical cpu
hotplug.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@muc.de>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

Make an mmconfig warning print the bus id with a regular format.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

cyrix_identify() should be __init because transmeta_identify() is.
tsc_init() is only called from setup_arch() which is marked as __init.

These two section mismatches have been detected using running modpost on
a vmlinux image compiled with CONFIG_RELOCATABLE=y.
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>

There is no need to duplicate the topology_init() function.
Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>

Now for a completely different but trivial approach.
I just boot tested it with 255 CPUS and everything worked.

Currently everything (except module data) we place in
the per cpu area we know about at compile time.  So
instead of allocating a fixed size for the per_cpu area
allocate the number of bytes we need plus a fixed constant
for to be used for modules.

It isn't perfect but it is much less of a pain to
work with than what we are doing now.

AK: fixed warning
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>

The implementation comes from Zach's [RFC, PATCH 10/24] i386 Vmi
descriptor changes:

Descriptor and trap table cleanups.  Add cleanly written accessors for
IDT and GDT gates so the subarch may override them.  Note that this
allows the hypervisor to transparently tweak the DPL of the descriptors
as well as the RPL of segments in those descriptors, with no unnecessary
kernel code modification.  It also allows the hypervisor implementation
of the VMI to tweak the gates, allowing for custom exception frames or
extra layers of indirection above the guest fault / IRQ handlers.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

And add proper CFI annotation to it which was previously
impossible. This prevents "stuck" messages by the dwarf2 unwinder
when reaching the top of a kernel stack.

Includes feedback from Jan Beulich

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

enable_local_apic can now become static.

Cc: len.brown@intel.com
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>

acpi_force can become static.

Cc: len.brown@intel.com
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>

It's needed for external debuggers and overhead is very small.

Also make the actual notifier chain they use static

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

It's needed for external debuggers and overhead is very small.

Also make the actual notifier chain they use static

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

Fix

linux/arch/i386/kernel/mpparse.c: In function #MP_bus_info#:
linux/arch/i386/kernel/mpparse.c:232: warning: comparison is always false due to limited range of data type
Signed-off-by: Andi Kleen <ak@suse.de>

Since it's all zero.

Actually I think gcc 4+ will do that automatically, but earlier compilers won't
Signed-off-by: Andi Kleen <ak@suse.de>

Improve Kconfig description of CONFIG_CRASH_DUMP. Previously
it was too brief to be useful.

Cc: vgoyal@in.ibm.com
Cc: ebiederm@xmission.com
Signed-off-by: Andi Kleen <ak@suse.de>

I've noticed some erratic behavior while testing the X86_64 version
of monotonic_clock().

While spinning in a loop reading monotonic clock values (pinned to a
single cpu) I noticed that the difference between subsequent values
occasionally went negative (time going backwards).

I found that in the following code:
                this_offset = get_cycles_sync();
                /* FIXME: 1000 or 1000000? */
-->             offset = (this_offset - last_offset)*1000 / cpu_khz;
        }
        return base + offset;

the offset sometimes turns out to be 0, even though
this_offset > last_offset.

+Added fix From: Toyo Abe <toyoa@mvista.com>

The x86_64-mm-monotonic-clock.patch in 2.6.18-rc4-mm2 made a change to
the updating of monotonic_base. It now uses cycles_2_ns().

I suggest that a set_cyc2ns_scale() should be done prior to the setup_irq().
Because cycles_2_ns() can be called from the timer ISR right after the irq0
is enabled.
Signed-off-by: Toyo Abe <toyoa@mvista.com>
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>

This patch moves the entry.S:error_entry to .kprobes.text section,
since code marked unsafe for kprobes jumps directly to entry.S::error_entry,
that must be marked unsafe as well.
This patch also moves all the ".previous.text" asm directives to ".previous"
for kprobes section.

AK: Following a similar i386 patch from Chuck Ebbert
AK: Also merged Jeremy's fix in.

+From: Jeremy Fitzhardinge <jeremy@goop.org>

KPROBE_ENTRY does a .section .kprobes.text, and expects its users to
do a .previous at the end of the function.

Unfortunately, if any code within the function switches sections, for
example .fixup, then the .previous ends up putting all subsequent code
into .fixup.  Worse, any subsequent .fixup code gets intermingled with
the code its supposed to be fixing (which is also in .fixup).  It's
surprising this didn't cause more havok.

The fix is to use .pushsection/.popsection, so this stuff nests
properly.  A further cleanup would be to get rid of all
.section/.previous pairs, since they're inherently fragile.

+From: Chuck Ebbert <76306.1226@compuserve.com>

Because code marked unsafe for kprobes jumps directly to
entry.S::error_code, that must be marked unsafe as well.
The easiest way to do that is to move the page fault entry
point to just before error_code and let it inherit the same
section.

Also moved all the ".previous" asm directives for kprobes
sections to column 1 and removed ".text" from them.
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>

We have a test that looks for invalid pairings of certain athlon/durons
that weren't designed for SMP, and taint accordingly (with 'S') if we find
such a configuration.  However, this test shouldn't fire if there's only
a single CPU present. It's perfectly valid for an SMP kernel to boot on UP
hardware for example.

AK: changed to num_possible_cpus()
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Fix a very dubious piece of code in
arch/i386/kernel/cpu/common.c:cpu_init().  This clears out %fs and
%gs, but clobbers %eax in the process without telling gcc.  It turns
out that gcc happens to be not using %eax at that point anyway so it
doesn't matter much, but it looks like a bomb waiting to go off.

This does end up saving an instruction, because gcc wants %eax==0 for
the set_debugreg()s below.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andi Kleen <ak@suse.de>

Now that stacktrace supports dwarf2 don't force frame pointers for lockdep anymore

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

Following x86-64 patches. Reuses code from them in fact.

Convert the standard backtracer to do all output using
callbacks.   Use the x86-64 stack tracer implementation
that uses these callbacks to implement the stacktrace interface.

This allows to use the new dwarf2 unwinder for stacktrace
and get better backtraces.

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

This unifies the standard backtracer and the new stacktrace
in memory backtracer. The standard one is converted to use callbacks
and then reimplement stacktrace using new callbacks.

The main advantage is that stacktrace can now use the new dwarf2 unwinder
and avoid false positives in many cases.

I kept it simple to make sure the standard backtracer stays reliable.

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

Needed for use of the unwinder in lockdep, because lockdep runs really
early too.

Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>

Lockdep can call the dwarf2 unwinder early, and the dwarf2 code
uses safe_smp_processor_id which tries to access the local APIC page.
But that doesn't work before the APIC code has set up its fixmap.

Check for this case and always return boot cpu then.

Cc: jbeulich@novell.com
Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

The new dwarf2 unwinder needs to take locks to do backtraces
inside modules. This patch makes sure lockdep which calls
stacktrace is not reentered.

Thanks to Ingo for suggesting this simpler approach.

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

- Remove unused all_contexts parameter
No caller used it
- Move skip argument into the structure (needed for
followon patches)

Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

tce_cache_blast_stress was useful during bringup to stress the IOMMU's
cache flushing. Now that we quiesce DMAs on every cache flush, using
_stress() brings the machine down to its knees once you put it under
load. Remove this debug / bringup code that isn't useful anymore
completely.
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Introduce new function verify_bit_range(). Define two versions, one
for CONFIG_IOMMU_DEBUG enabled and one for disabled. Previously we
were checking that the bitmap was consistent every time we allocated
or freed an entry in the TCE table, which is good for debugging but
incurs an unnecessary penalty on non debug builds.
Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>

is_at_popf() needs to test for the iret instruction as well as
popf.  So add that test and rename it to is_setting_trap_flag().

Also change max insn length from 16 to 15 to match reality.

LAHF / SAHF can't affect TF, so the comment in x86_64 is removed.
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>

And move one into proto.h

Cc: len.brown@intel.com
Signed-off-by: Andi Kleen <ak@suse.de>

The combination of "local_save_flags" and "local_irq_disable" seems to be
equivalent to "local_irq_save" (see code snips below). Consequently, replace
occurrences of local_save_flags+local_irq_disable with local_irq_save.

* local_irq_save
#define raw_local_irq_save(flags) \
                do { (flags) = __raw_local_irq_save(); } while (0)

static inline unsigned long __raw_local_irq_save(void)
{
        unsigned long flags = __raw_local_save_flags();

        raw_local_irq_disable();

        return flags;
}

* local_save_flags
#define raw_local_save_flags(flags) \
                do { (flags) = __raw_local_save_flags(); } while (0)
Signed-off-by: Fernando Vazquez <fernando@intellilink.co.jp>
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

Mostly by adding casts.

I didn't touch the "invalid access past ..." which are caused
by the sigset conversion.
Signed-off-by: Andi Kleen <ak@suse.de>