- 26 Aug, 2013 5 commits
-
-
Srivatsa Vaddagiri authored
kvm_hc_kick_cpu allows the calling vcpu to kick another vcpu out of halt state. the presence of these hypercalls is indicated to guest via kvm_feature_pv_unhalt. Fold pv_unhalt flag into GET_MP_STATE ioctl to aid migration During migration, any vcpu that got kicked but did not become runnable (still in halted state) should be runnable after migration. Signed-off-by:
Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by:
Suzuki Poulose <suzuki@in.ibm.com> [Raghu: Apic related changes, folding pvunhalted into vcpu_runnable Added flags for future use (suggested by Gleb)] [ Raghu: fold pv_unhalt flag as suggested by Eric Northup] Signed-off-by:
Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Acked-by:
Gleb Natapov <gleb@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Raghavendra K T authored
this is needed by both guest and host. Originally-from: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by:
-
David Daney authored
We need to use more of the Macros in asm.h to allow kvm_locore.S to build in a 64-bit kernel. For 32-bit there is no change in the generated object code. Signed-off-by:
David Daney <david.daney@cavium.com> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
David Daney authored
There are: .set push .set noreorder .set noat . . . .set pop Sequences all over the place in this file, but in some places the final ".set pop" is erroneously converted to ".set push", so none of these really do what they appear to. Clean up the whole mess by moving ".set noreorder", ".set noat" to the top, and get rid of everything else. Generated object code is unchanged. Signed-off-by:
-
David Daney authored
No code changes, just reflowing some comments and consistently using tabs and spaces. Object code is verified to be unchanged. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
- 13 Aug, 2013 1 commit
-
-
Jan Kiszka authored
Add decoding for INVEPT and reorder the list according to the reason numbers. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
- 07 Aug, 2013 21 commits
-
-
Arthur Chunqi Li authored
Advertise VM_EXIT_SAVE_IA32_PAT and VM_EXIT_LOAD_IA32_PAT. Signed-off-by:
Arthur Chunqi Li <yzt356@gmail.com> Signed-off-by:
-
Jan Kiszka authored
Do not report that we can enter the guest in 64-bit mode if the host is 32-bit only. This is not supported by KVM. Signed-off-by:
-
Jan Kiszka authored
At least WB must be possible. Signed-off-by:
-
Jan Kiszka authored
When asking vmx to load the PAT MSR for us while switching from L1 to L2 or vice versa, we have to update arch.pat as well as it may later be used again to load or read out the MSR content. Reviewed-by:
-
Nadav Har'El authored
Some trivial code cleanups not really related to nested EPT. Reviewed-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by:
Nadav Har'El <nyh@il.ibm.com> Signed-off-by:
Jun Nakajima <jun.nakajima@intel.com> Signed-off-by:
Xinhao Xu <xinhao.xu@intel.com> Reviewed-by:
Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by:
-
Nadav Har'El authored
Some additional comments to preexisting code: Explain who (L0 or L1) handles EPT violation and misconfiguration exits. Don't mention "shadow on either EPT or shadow" as the only two options. Reviewed-by:
-
Nadav Har'El authored
This is the last patch of the basic Nested EPT feature, so as to allow bisection through this patch series: The guest will not see EPT support until this last patch, and will not attempt to use the half-applied feature. Reviewed-by:
-
Nadav Har'El authored
If we let L1 use EPT, we should probably also support the INVEPT instruction. In our current nested EPT implementation, when L1 changes its EPT table for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in the course of this modification already calls INVEPT. But if last level of shadow page is unsync not all L1's changes to EPT12 are intercepted, which means roots need to be synced when L1 calls INVEPT. Global INVEPT should not be different since roots are synced by kvm_mmu_load() each time EPTP02 changes. Reviewed-by:
-
Nadav Har'El authored
KVM's existing shadow MMU code already supports nested TDP. To use it, we need to set up a new "MMU context" for nested EPT, and create a few callbacks for it (nested_ept_*()). This context should also use the EPT versions of the page table access functions (defined in the previous patch). Then, we need to switch back and forth between this nested context and the regular MMU context when switching between L1 and L2 (when L1 runs this L2 with EPT). Reviewed-by:
-
Yang Zhang authored
Inject nEPT fault to L1 guest. This patch is original from Xinhao. Reviewed-by:
-
Gleb Natapov authored
need_remote_flush() assumes that shadow page is in PT64 format, but with addition of nested EPT this is no longer always true. Fix it by bits definitions that depend on host shadow page type. Reported-by:
-
Yang Zhang authored
Since nEPT doesn't support A/D bit, so we should not set those bit when build shadow page table. Reviewed-by:
-
Nadav Har'El authored
This is the first patch in a series which adds nested EPT support to KVM's nested VMX. Nested EPT means emulating EPT for an L1 guest so that L1 can use EPT when running a nested guest L2. When L1 uses EPT, it allows the L2 guest to set its own cr3 and take its own page faults without either of L0 or L1 getting involved. This often significanlty improves L2's performance over the previous two alternatives (shadow page tables over EPT, and shadow page tables over shadow page tables). This patch adds EPT support to paging_tmpl.h. paging_tmpl.h contains the code for reading and writing page tables. The code for 32-bit and 64-bit tables is very similar, but not identical, so paging_tmpl.h is #include'd twice in mmu.c, once with PTTTYPE=32 and once with PTTYPE=64, and this generates the two sets of similar functions. There are subtle but important differences between the format of EPT tables and that of ordinary x86 64-bit page tables, so for nested EPT we need a third set of functions to read the guest EPT table and to write the shadow EPT table. So this patch adds third PTTYPE, PTTYPE_EPT, which creates functions (prefixed with "EPT") which correctly read and write EPT tables. Reviewed-by:
-
Gleb Natapov authored
Some guest paging modes do not support A/D bits. Add support for such modes in shadow page code. For such modes PT_GUEST_DIRTY_MASK, PT_GUEST_ACCESSED_MASK, PT_GUEST_DIRTY_SHIFT and PT_GUEST_ACCESSED_SHIFT should be set to zero. Reviewed-by:
-
Gleb Natapov authored
This patch makes guest A/D bits definition to be dependable on paging mode, so when EPT support will be added it will be able to define them differently. Reviewed-by:
-
Nadav Har'El authored
For preparation, we just move gpte_access(), prefetch_invalid_gpte(), s_rsvd_bits_set(), protect_clean_gpte() and is_dirty_gpte() from mmu.c to paging_tmpl.h. Reviewed-by:
-
Nadav Har'El authored
kvm_set_cr3() attempts to check if the new cr3 is a valid guest physical address. The problem is that with nested EPT, cr3 is an *L2* physical address, not an L1 physical address as this test expects. As the comment above this test explains, it isn't necessary, and doesn't correspond to anything a real processor would do. So this patch removes it. Note that this wrong test could have also theoretically caused problems in nested NPT, not just in nested EPT. However, in practice, the problem was avoided: nested_svm_vmexit()/vmrun() do not call kvm_set_cr3 in the nested NPT case, and instead set the vmcb (and arch.cr3) directly, thus circumventing the problem. Additional potential calls to the buggy function are avoided in that we don't trap cr3 modifications when nested NPT is enabled. However, because in nested VMX we did want to use kvm_set_cr3() (as requested in Avi Kivity's review of the original nested VMX patches), we can't avoid this problem and need to fix it. Reviewed-by:
Orit Wasserman <owasserm@redhat.com> Reviewed-by:
-
Nadav Har'El authored
The existing code for handling cr3 and related VMCS fields during nested exit and entry wasn't correct in all cases: If L2 is allowed to control cr3 (and this is indeed the case in nested EPT), during nested exit we must copy the modified cr3 from vmcs02 to vmcs12, and we forgot to do so. This patch adds this copy. If L0 isn't controlling cr3 when running L2 (i.e., L0 is using EPT), and whoever does control cr3 (L1 or L2) is using PAE, the processor might have saved PDPTEs and we should also save them in vmcs12 (and restore later). Reviewed-by:
-
Nadav Har'El authored
Recent KVM, since http://kerneltrap.org/mailarchive/linux-kvm/2010/5/2/6261577 switch the EFER MSR when EPT is used and the host and guest have different NX bits. So if we add support for nested EPT (L1 guest using EPT to run L2) and want to be able to run recent KVM as L1, we need to allow L1 to use this EFER switching feature. To do this EFER switching, KVM uses VM_ENTRY/EXIT_LOAD_IA32_EFER if available, and if it isn't, it uses the generic VM_ENTRY/EXIT_MSR_LOAD. This patch adds support for the former (the latter is still unsupported). Nested entry and exit emulation (prepare_vmcs_02 and load_vmcs12_host_state, respectively) already handled VM_ENTRY/EXIT_LOAD_IA32_EFER correctly. So all that's left to do in this patch is to properly advertise this feature to L1. Note that vmcs12's VM_ENTRY/EXIT_LOAD_IA32_EFER are emulated by L0, by using vmx_set_efer (which itself sets one of several vmcs02 fields), so we always support this feature, regardless of whether the host supports it. Reviewed-by:
-
Xiao Guangrong authored
Current code always uses arch.mmu to check the reserved bits on guest gpte which is valid only for L1 guest, we should use arch.nested_mmu instead when we translate gva to gpa for the L2 guest Fix it by using @mmu instead since it is adapted to the current mmu mode automatically The bug can be triggered when nested npt is used and L1 guest and L2 guest use different mmu mode Reported-by:
-
Gleb Natapov authored
After commit 21feb4eb tr base is zeroed during vmexit. Set it to L1's HOST_TR_BASE. This should fix https://bugzilla.kernel.org/show_bug.cgi?id=60679Reported-by:
Yongjie Ren <yongjie.ren@intel.com> Reviewed-by:
-
- 29 Jul, 2013 11 commits
-
-
Gleb Natapov authored
During nested vmentry into vm86 mode a vcpu state is found to be incorrect because rflags does not have VM flag set since it is read from the cache and has L1's value instead of L2's. If emulate_invalid_guest_state=1 L0 KVM tries to emulate it, but emulation does not work for nVMX and it never should happen anyway. Fix that by using vmx_set_rflags() to set rflags during nested vmentry which takes care of updating register cache. Signed-off-by:
-
Dominik Dingel authored
Current common code uses PAGE_OFFSET to indicate a bad host virtual address. As this check won't work on architectures that don't map kernel and user memory into the same address space (e.g. s390), such architectures can now provide their own KVM_HVA_ERR_BAD defines. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Thomas Huth authored
Introduced a helper function for setting the CC in the guest PSW to improve the readability of the code. Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Huth authored
sparse complained about the missing UL postfix for long constants. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Michael Mueller authored
The patch renames the array holding the HW facility bitmaps. This allows to interprete the variable as set of virtual machine specific "virtual" facilities. The basic idea is to make virtual facilities externally managable in future. An availability test for virtual facilites has been added as well. Signed-off-by:
Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The gmap_map_segment function uses PGDIR_SIZE in the check for the maximum address in the tasks address space. This incorrectly limits the amount of memory usable for a kvm guest to 4TB. The correct limit is (1UL << 53). As the TASK_SIZE has different values (4TB vs 8PB) dependent on the existance of the fourth page table level, create a new define 'TASK_MAX_SIZE' for (1UL << 53). Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Improve the code to upgrade the standard 2K page tables to 4K page tables with PGSTEs to allow the operation to happen when the program is already multi-threaded. Signed-off-by:
-
Paolo Bonzini authored
This lets debugging work better during emulation of invalid guest state. This time the check is done after emulation, but before writeback of the flags; we need to check the flags *before* execution of the instruction, we cannot check singlestep_rip because the CS base may have already been modified. Signed-off-by: -
Paolo Bonzini authored
This lets debugging work better during emulation of invalid guest state. The check is done before emulating the instruction, and (in the case of guest debugging) reuses EMULATE_DO_MMIO to exit with KVM_EXIT_DEBUG. Signed-off-by: -
Paolo Bonzini authored
The next patch will reuse it for other userspace exits than MMIO, namely debug events. Signed-off-by: -
Paolo Bonzini authored
kvm_io_bus_sort_cmp is used also directly, not just as a callback for sort and bsearch. In these cases, it is handy to have a type-safe variant. This patch introduces such a variant, __kvm_io_bus_sort_cmp, and uses it throughout kvm_main.c. Signed-off-by:
-
- 25 Jul, 2013 2 commits
-
-
Jan Kiszka authored
Both have no users anymore. Signed-off-by:
-
Jan Kiszka authored
If posted interrupts are enabled, we can no longer track if an IRQ was coalesced based on IRR. So drop this logic also from the classic software path and simplify apic_test_and_set_irr to apic_set_irr. Signed-off-by:
-
