We have uses of CONFIG_UPROBE_EVENT and CONFIG_KPROBE_EVENT as
well as CONFIG_UPROBE_EVENTS and CONFIG_KPROBE_EVENTS.

Consistently use the plurals.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: davem@davemloft.net
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20170216060050.20866-1-anton@ozlabs.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Fix to the exception table entry check by using probed address
instead of the address of copied instruction.

This bug may cause unexpected kernel panic if user probe an address
where an exception can happen which should be fixup by __ex_table
(e.g. copy_from_user.)

Unless user puts a kprobe on such address, this doesn't
cause any problem.

This bug has been introduced years ago, by commit:

  46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently").
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 46484688 ("x86/kprobes: Fix a bug which can modify kernel code permanently")
Link: http://lkml.kernel.org/r/148829899399.28855.12581062400757221722.stgit@devboxSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull IPMI updates from Corey Minyard:
 "This is a few small fixes to the main IPMI driver, make some things
  const, fix typos, etc.

  The last patch came in about a week ago, but IMHO it's best to go in
  now. It is not for the main driver, it's for the bt-bmc driver, which
  runs on the managment controller side, not on the host side, so the
  scope is limited and the change is necessary"

* tag 'for-linus-4.11' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: bt-bmc: Use a regmap for register access
  char: ipmi: constify ipmi_smi_handlers structures
  acpi:ipmi: Make IPMI user handler const
  ipmi: make ipmi_usr_hndl const
  Documentation: Fix a typo in IPMI.txt.

Pull IDR rewrite from Matthew Wilcox:
 "The most significant part of the following is the patch to rewrite the
  IDR & IDA to be clients of the radix tree. But there's much more,
  including an enhancement of the IDA to be significantly more space
  efficient, an IDR & IDA test suite, some improvements to the IDR API
  (and driver changes to take advantage of those improvements), several
  improvements to the radix tree test suite and RCU annotations.

  The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
  for most of the last cycle. Coupled with the IDR test suite, I feel
  pretty confident that any remaining bugs are quite hard to hit. 0-day
  did a great job of watching my git tree and pointing out problems; as
  it hit them, I added new test-cases to be sure not to be caught the
  same way twice"

Willy goes on to expand a bit on the IDR rewrite rationale:
 "The radix tree and the IDR use very similar data structures.

  Merging the two codebases lets us share the memory allocation pools,
  and results in a net deletion of 500 lines of code. It also opens up
  the possibility of exposing more of the features of the radix tree to
  users of the IDR (and I have some interesting patches along those
  lines waiting for 4.12)

  It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
  will shrink a fair few data structures that embed an IDR"

* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
  radix tree test suite: Add config option for map shift
  idr: Add missing __rcu annotations
  radix-tree: Fix __rcu annotations
  radix-tree: Add rcu_dereference and rcu_assign_pointer calls
  radix tree test suite: Run iteration tests for longer
  radix tree test suite: Fix split/join memory leaks
  radix tree test suite: Fix leaks in regression2.c
  radix tree test suite: Fix leaky tests
  radix tree test suite: Enable address sanitizer
  radix_tree_iter_resume: Fix out of bounds error
  radix-tree: Store a pointer to the root in each node
  radix-tree: Chain preallocated nodes through ->parent
  radix tree test suite: Dial down verbosity with -v
  radix tree test suite: Introduce kmalloc_verbose
  idr: Return the deleted entry from idr_remove
  radix tree test suite: Build separate binaries for some tests
  ida: Use exceptional entries for small IDAs
  ida: Move ida_bitmap to a percpu variable
  Reimplement IDR and IDA using the radix tree
  radix-tree: Add radix_tree_iter_delete
  ...

Pull IOMMU fixes from Joerg Roedel:
 "Fix an issue introduced this merge window into the AMD and Intel IOMMU
  drivers that causes an oops when the vendor-specific sysfs-entries are
  accessed.

  The reason for this issue is that I forgot to update the sysfs code in
  the drivers when moving the iommu 'struct device' to the iommu-core"

* tag 'iommu-fix-v4.11-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix crash when accessing AMD-Vi sysfs entries
  iommu/vt-d: Fix crash when accessing VT-d sysfs entries

Pull nfsd updates from Bruce Fields:
 "The nfsd update this round is mainly a lot of miscellaneous cleanups
  and bugfixes.

  A couple changes could theoretically break working setups on upgrade.
  I don't expect complaints in practice, but they seem worth calling out
  just in case:

   - NFS security labels are now off by default; a new security_label
     export flag reenables it per export. But, having them on by default
     is a disaster, as it generally only makes sense if all your clients
     and servers have similar enough selinux policies. Thanks to Jason
     Tibbitts for pointing this out.

   - NFSv4/UDP support is off. It was never really supported, and the
     spec explicitly forbids it. We only ever left it on out of
     laziness; thanks to Jeff Layton for finally fixing that"

* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd: Fix display of the version string
  nfsd: fix configuration of supported minor versions
  sunrpc: don't register UDP port with rpcbind when version needs congestion control
  nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
  sunrpc: flag transports as having congestion control
  sunrpc: turn bitfield flags in svc_version into bools
  nfsd: remove superfluous KERN_INFO
  nfsd: special case truncates some more
  nfsd: minor nfsd_setattr cleanup
  NFSD: Reserve adequate space for LOCKT operation
  NFSD: Get response size before operation for all RPCs
  nfsd/callback: Drop a useless data copy when comparing sessionid
  nfsd/callback: skip the callback tag
  nfsd/callback: Cleanup callback cred on shutdown
  nfsd/idmap: return nfserr_inval for 0-length names
  SUNRPC/Cache: Always treat the invalid cache as unexpired
  SUNRPC: Drop all entries from cache_detail when cache_purge()
  svcrdma: Poll CQs in "workqueue" mode
  svcrdma: Combine list fields in struct svc_rdma_op_ctxt
  svcrdma: Remove unused sc_dto_q field
  ...

Pull ceph updates from Ilya Dryomov:
 "This time around we have:

   - support for rbd data-pool feature, which enables rbd images on
     erasure-coded pools (myself). CEPH_PG_MAX_SIZE has been bumped to
     allow erasure-coded profiles with k+m up to 32.

   - a patch for ceph_d_revalidate() performance regression introduced
     in 4.9, along with some cleanups in the area (Jeff Layton)

   - a set of fixes for unsafe ->d_parent accesses in CephFS (Jeff
     Layton)

   - buffered reads are now processed in rsize windows instead of rasize
     windows (Andreas Gerstmayr). The new default for rsize mount option
     is 64M.

   - ack vs commit distinction is gone, greatly simplifying ->fsync()
     and MOSDOpReply handling code (myself)

  ... also a few filesystem bug fixes from Zheng, a CRUSH sync up (CRUSH
  computations are still serialized though) and several minor fixes and
  cleanups all over"

* tag 'ceph-for-4.11-rc1' of git://github.com/ceph/ceph-client: (52 commits)
  libceph, rbd, ceph: WRITE | ONDISK -> WRITE
  libceph: get rid of ack vs commit
  ceph: remove special ack vs commit behavior
  ceph: tidy some white space in get_nonsnap_parent()
  crush: fix dprintk compilation
  crush: do is_out test only if we do not collide
  ceph: remove req from unsafe list when unregistering it
  rbd: constify device_type structure
  rbd: kill obj_request->object_name and rbd_segment_name_cache
  rbd: store and use obj_request->object_no
  rbd: RBD_V{1,2}_DATA_FORMAT macros
  rbd: factor out __rbd_osd_req_create()
  rbd: set offset and length outside of rbd_obj_request_create()
  rbd: support for data-pool feature
  rbd: introduce rbd_init_layout()
  rbd: use rbd_obj_bytes() more
  rbd: remove now unused rbd_obj_request_wait() and helpers
  rbd: switch rbd_obj_method_sync() to ceph_osdc_call()
  libceph: pass reply buffer length through ceph_osdc_call()
  rbd: do away with obj_request in rbd_obj_read_sync()
  ...

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

Pull x86 fixes from Ingo Molnar:
 "Two documentation updates, plus a debugging annotation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Update the stale comment in reserve_crashkernel()
  x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
  Documentation, x86, resctrl: Recommend locking for resctrlfs

Pull scheduler fixes from Ingo Molnar:
 "Two rq-clock warnings related fixes, plus a cgroups related crash fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cgroup: Move sched_online_group() back into css_online() to fix crash
  sched/fair: Update rq clock before changing a task's CPU affinity
  sched/core: Fix update_rq_clock() splat on hotplug (and suspend/resume)

Pull perf fixes from Ingo Molnar:
 "Misc fixes on the kernel and tooling side - nothing in particular
  stands out"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf/core: Fix the perf_cpu_time_max_percent check
  perf/core: Fix perf_event_enable_on_exec() timekeeping (again)
  perf/core: Remove confusing comment and move put_ctx()
  perf record: Honor --quiet option properly
  perf annotate: Add -q/--quiet option
  perf diff: Add -q/--quiet option
  perf report: Add -q/--quiet option
  perf utils: Check verbose flag properly
  perf utils: Add perf_quiet_option()
  perf record: Add -a as default target
  perf stat: Add -a as default target
  perf tools: Fail on using multiple bits long terms without value
  perf tools: Move new_term arguments into struct parse_events_term template
  perf build: Add special fixdep cleaning rule
  perf tools: Replace _SC_NPROCESSORS_CONF with max_present_cpu in cpu_topology_map
  perf header: Make build_cpu_topology skip offline/absent CPUs
  perf cpumap: Add cpu__max_present_cpu()
  perf session: Fix DEBUG=1 build with clang
  tools lib traceevent: It's preempt not prempt
  perf python: Filter out -specs=/a/b/c from the python binding cc options
  ...

Pull locking fixes from Ingo Molnar:
 "The main change is the uninlining of large refcount_t APIs, plus a
  header dependency fix.

  Note that the uninlining allowed us to enable the underflow/overflow
  warnings unconditionally and remove the debug Kconfig switch: this
  might trigger new warnings in buggy code and turn
  crashes/use-after-free bugs into less harmful memory leaks"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Add missing kernel.h header to have UINT_MAX defined
  locking/refcounts: Out-of-line everything

Pull objtool fixes from Ingo Molnar:
 "A handful of objtool fixes related to unreachable code, plus a build
  fix for out of tree modules"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Enclose contents of unreachable() macro in a block
  objtool: Prevent GCC from merging annotate_unreachable()
  objtool: Improve detection of BUG() and other dead ends
  objtool: Fix CONFIG_STACK_VALIDATION=y warning for out-of-tree modules

Pull IDE updates from David Miller:
 "Just one actual change here this time around, adding some init data
  annotations. The other change was bogus and got reverted"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: palm_bk3710: add __initdata to palm_bk3710_port_info
  Revert "ide: Fix interface autodetection in legacy IDE driver (trial #2)"
  ide: Fix interface autodetection in legacy IDE driver (trial #2)

Pull networking fixes from David Miller:

 1) Don't save TIPC header values before the header has been validated,
    from Jon Paul Maloy.

 2) Fix memory leak in RDS, from Zhu Yanjun.

 3) We miss to initialize the UID in the flow key in some paths, from
    Julian Anastasov.

 4) Fix latent TOS masking bug in the routing cache removal from years
    ago, also from Julian.

 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
    fix from Xin Long.

 6) Missing module ref count drop in packet scheduler actions, from
    Roman Mashak.

 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.

 8) Fix use after free which happens because L2TP's ipv4 support returns
    non-zero values from it's backlog_rcv function which ipv4 interprets
    as protocol values. Fix from Paul Hüber.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  qed: Don't use attention PTT for configuring BW
  qed: Fix race with multiple VFs
  l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
  xfrm: provide correct dst in xfrm_neigh_lookup
  rhashtable: Fix RCU dereference annotation in rht_bucket_nested
  rhashtable: Fix use before NULL check in bucket_table_free
  net sched actions: do not overwrite status of action creation.
  rxrpc: Kernel calls get stuck in recvmsg
  net sched actions: decrement module reference count after table flush.
  lib: Allow compile-testing of parman
  ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
  sctp: set sin_port for addr param when checking duplicate address
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
  netfilter: nft_set_bitmap: incorrect bitmap size
  net: s2io: fix typo argumnet argument
  net: vxge: fix typo argumnet argument
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
  ipv4: mask tos for input route
  ipv4: add missing initialization for flowi4_uid
  lib: fix spelling mistake: "actualy" -> "actually"
  ...

The link between the iommu sysfs-device and the struct
amd_iommu is no longer stored as driver-data. Update the
code to the new correct way of getting from device to
amd_iommu.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The link between the iommu sysfs-device and the struct
intel_iommu is no longer stored as driver-data. Update the
code to use the new access method.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 39ab9555 ('iommu: Add sysfs bindings for struct iommu_device')
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Merge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to indicate}' into for-linus

Round the initrd memblock reservation to page boundaries to prevent
other data sharing the initrd pages.  This prevents an allocation
possibly overlapping with the initrd, which would later get trampled
on in free_initrd_mem().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Rather than repeatedly testing phys_initrd_size to see if the initrd
is still enabled, return from the new function to avoid executing the
remaining initialisation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Move the ARM initrd initialisation code out of arm_memblock_init() into
its own function, so it can be cleaned up.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The tegra DRM driver produces a harmless warning when built for NOMMU:

drivers/gpu/drm/tegra/gem.c: In function 'tegra_drm_mmap':
drivers/gpu/drm/tegra/gem.c:508:12: unused variable 'prot'

This is because pgprot_writecombine() on ARM returns a constant and
ignores its argument. The version in asm-generic doesn't have that
problem, so let's use that one instead. We don't actually care
about the value on NOMMU, and this is consistent with what some
other architectures do.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The decompress.c file contains a declaration for strstr() so we can
include some compression library code.

With the updated LZ4 implementation, we run into the same problem again
for strlen():

In file included from ../include/linux/rcupdate.h:40:0,
                 from ../include/linux/srcu.h:33,
                 from ../include/linux/notifier.h:15,
                 from ../include/linux/memory_hotplug.h:6,
                 from ../include/linux/mmzone.h:749,
                 from ../include/linux/gfp.h:5,
                 from ../include/linux/kmod.h:22,
                 from ../include/linux/module.h:13,
                 from ../arch/arm/boot/compressed/../../../../lib/lz4/lz4_decompress.c:39,
                 from ../arch/arm/boot/compressed/../../../../lib/decompress_unlz4.c:13,
                 from ../arch/arm/boot/compressed/decompress.c:55:
include/linux/cpumask.h: In function 'cpumask_parse':
include/linux/cpumask.h:592:53: error: implicit declaration of function 'strlen';did you mean 'strstr'? [-Werror=implicit-function-declaration]

This adds another declaration to work around the new problem.

Fixes: ce83d9ab80d6 ("lib: update LZ4 compressor module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Now, the active way setup function is called with a fixed value zero
for the second argument.  The code can be simpler.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Nothing in this header file depends on <linux/types.h>.
Rather, <linux/errno.h> should be included for -ENODEV.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

According to the spec 'ELF for the ARM Architecture' (IHI 0044E),
addends for R_ARM_PREL31 relocations are 31-bit signed quantities,
so we need to sign extend the value to 32 bits before it can be used
as an offset in the calculation of the relocated value.

We have not been bitten by this because these relocations are usually
emitted against the start of a section, which means the addends never
assume negative values in practice. But it is a bug nonetheless, so fix
it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Now that exception based address is handled dynamically for
processors with CP15, remove Hivecs configuration in assembly.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

VECTORS_BASE displays the exception base address. Now on no-MMU as
the exception base address is dynamically estimated, define
VECTORS_BASE to the variable holding it.

As it is the case, limit VECTORS_BASE constant definition to MMU.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

No-MMU dynamic exception base address configuration on CP15
processors. In the case of low vectors, decision based on whether
security extensions are enabled & whether remap vectors to RAM
CONFIG option is selected.

For no-MMU without CP15, current default value of 0x0 is retained.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro
definition will suffice.

For no-MMU, exception base address is dynamically determined in
subsequent patches. To preserve bisectability, now make the
macro applicable for no-MMU scenario too.

Thanks to 0-DAY kernel test infrastructure that found the
bisectability issue. This macro will be restricted to MMU case upon
dynamically determining exception base address for no-MMU.

Once exception address is handled dynamically for no-MMU,
VECTORS_BASE can be removed from Kconfig.
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Similar to c68b0274 ("ARM: reduce "Booted secondary processor"
message to debug level"), demote the "CPU: shutdown" pr_notice() into a
pr_debug().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

All low-level PM/SMP code using virt_to_phys() should actually use
__pa_symbol() against kernel symbols. Update code where relevant to move
away from virt_to_phys().
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on
virt_to_phys calls. The goal is to catch users who are calling
virt_to_phys on non-linear addresses immediately. This includes caller
using __virt_to_phys() on image addresses instead of __pa_symbol(). This
is a generally useful debug feature to spot bad code (particulary in
drivers).
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

In preparation for adding CONFIG_DEBUG_VIRTUAL support, define a set of
common constants: KERNEL_START and KERNEL_END which abstract
CONFIG_XIP_KERNEL vs. !CONFIG_XIP_KERNEL. Update the code where
relevant.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

In preparation for defining KERNEL_START on ARM, rename KERNEL_START to
PART_KERNEL_START, and to be consistent, do this for all
partition-related constants.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

adjust_lowmem_bounds is responsible for setting up the boundary for
lowmem/highmem. This needs to be setup before memblock reservations can
occur. At the time memblock reservations can occur, memory can also be
removed from the system. The lowmem/highmem boundary and end of memory
may be affected by this but it is currently not recalculated. On some
systems this may be harmless, on others this may result in incorrect
ranges being passed to the main memory allocator. Correct this by
recalculating the lowmem/highmem boundary after all reservations have
been made.
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The logic for sanity_check_meminfo has become difficult to
follow. Clean up the code so it's more obvious what the code
is actually trying to do. Additionally, meminfo is now removed
so rename the function to better describe its purpose.
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Merge yet more updates from Andrew Morton:

 - a few MM remainders

 - misc things

 - autofs updates

 - signals

 - affs updates

 - ipc

 - nilfs2

 - spelling.txt updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
  mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()
  mm: add arch-independent testcases for RODATA
  hfs: atomically read inode size
  mm: clarify mm_struct.mm_{users,count} documentation
  mm: use mmget_not_zero() helper
  mm: add new mmget() helper
  mm: add new mmgrab() helper
  checkpatch: warn when formats use %Z and suggest %z
  lib/vsprintf.c: remove %Z support
  scripts/spelling.txt: add some typo-words
  scripts/spelling.txt: add "followings" pattern and fix typo instances
  scripts/spelling.txt: add "therfore" pattern and fix typo instances
  scripts/spelling.txt: add "overwriten" pattern and fix typo instances
  scripts/spelling.txt: add "overwritting" pattern and fix typo instances
  scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances
  scripts/spelling.txt: add "disassocation" pattern and fix typo instances
  scripts/spelling.txt: add "omited" pattern and fix typo instances
  scripts/spelling.txt: add "explictely" pattern and fix typo instances
  scripts/spelling.txt: add "applys" pattern and fix typo instances
  scripts/spelling.txt: add "configuartion" pattern and fix typo instances
  ...

Pull ktest updates from Steven Rostedt:
 "These are various fixes that I have made and never got around to
  pushing. I've been asked to get the upstream repo back up-to-date"

* tag 'ktest-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add variable run_command_status to save status of commands executed
  ktest.pl: Powercycle the box on reboot if no connection can be made
  ktest: Add timeout to ssh command
  ktest: Fix child exit code processing
  ktest: Have POST_TEST run after the test has totally completed