remove mt6359_platform_driver_remove due to it is
useless.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1605068096-12587-1-git-send-email-shane.chien@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Deferred probe is an expected return value for snd_soc_register_card().
Given that the driver deals with it properly, there's no need to output
a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20201111103245.152189-1-jonathanh@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

This series is a prepraration for using generic graph driver for Tegra210
audio. Tegra audio graph series will be sent in a separate series because
it has some dependency over other series for documentation work. This
series can focus on the generic ASoC driver updates. Below are the summary
of changes done.

 * Support multiple instances of a component. For example there can be
   multiple I2S devices which can use the same component driver.

 * Support open platforms with empty Codec endpoint. Customers can plug
   their own HW and can populate codec endpoint.

 * In a component model there can be many components which can be
   connected together. In such cases Identify no-pcm DPCM DAI links which
   can be used in BE<->BE connections.

 * Expose structures or helpers to be re-used by other similar graph
   drivers.

The series is based on following references where DPCM usgae for Tegra
Audio and simple-card driver proposal were discussed.

 * https://lkml.org/lkml/2020/4/30/519 (DPCM for Tegra)
 * https://lkml.org/lkml/2020/6/27/4 (simple-card driver)

Changelog
=========

v4 -> v5
--------
 * No changes in the core/audio-graph driver patches which are
   part of the current series.
 * Dropped Tegra audio patches and doc patches. This will be
   sent separately once the doc depdendencies are resolved.

v3 -> v4
--------
 * Added new patches to convert graph.txt and audio-graph-card.txt
   to corresponding json-schema files. Later these references
   are used in Tegra audio graph schema.

 * AHUB component binding docs are updated to reflect the usage
   of ports/port/endpoint

 * More common stuff is moved into graph_parse_of() and this is
   used by both generic and Tegra audio graph.

 * DT binding for Tegra audio graph is updated to included "ports { }"

 * As per the suggestion 'void *data' member is dropped from
   'asoc_simple_priv' and instead container method is used to
   maintain required custom data internal to Tegra audio graph.

v2 -> v3
--------
 * Dropped new compatible addition in generic graph driver
   after reviewing it with Morimoto-san. Instead added Tegra
   audio graph driver and new compatibles are added in the same.
 * Added new patches to expose new members for customization
   in audio graph driver.
 * Added new patch for Tegra audio graph driver and related
   documentation.
 * Minor change in below commit where mutex version of helper is used
   "ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM"
 * DT binding is updated to use the newly exposed compatibles
 * No changes in other patches

v1 -> v2
--------
 * Re-organized ports/endpoints description for ADMAIF and XBAR.
   Updated DT patches accordingly.
 * After above change, multiple Codec endpoint support is not
   required and hence dropped for now. This will be considered
   separately if at all required in future.
 * Re-ordered patches in the series.

Sameer Pujar (7):
  ASoC: soc-core: Fix component name_prefix parsing
  ASoC: soc-pcm: Get all BEs along DAPM path
  ASoC: audio-graph: Use of_node and DAI for DPCM DAI link names
  ASoC: audio-graph: Identify 'no_pcm' DAI links for DPCM
  ASoC: audio-graph: Support empty Codec endpoint
  ASoC: audio-graph: Expose new members for asoc_simple_priv
  ASoC: audio-graph: Expose helpers from audio graph

 include/sound/graph_card.h           |  16 ++++
 include/sound/simple_card_utils.h    |   3 +
 include/sound/soc.h                  |   1 +
 sound/soc/generic/audio-graph-card.c | 175 ++++++++++++++++++++++++-----------
 sound/soc/soc-core.c                 |   3 +-
 sound/soc/soc-pcm.c                  |   3 +-
 6 files changed, 143 insertions(+), 58 deletions(-)
 create mode 100644 include/sound/graph_card.h

--
2.7.4

There are two issues in this function.

1) We can't drop the refrences on "cpu", "codec" and "platform" before
   we take the reference.  This doesn't cause a problem on the first
   iteration because those pointers start as NULL so the of_node_put()
   is a no-op.  But on the subsequent iterations, it will lead to a use
   after free.

2) If the devm_kzalloc() allocation failed then the code returned
   directly instead of cleaning up.

Fixes: c1e6414c ("ASoC: qcom: common: Fix refcount imbalance on error")
Fixes: 1e36ea36 ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201105125154.GA176426@mwandaSigned-off-by: Mark Brown <broonie@kernel.org>

The break condition copied by mistake as same
as loop condition in the previous version, but must
be the opposite. So fix it.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/20201102161810.902464-1-viorel.suman@oss.nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

This commit exposes following functions which can be used by a sound
card driver based on generic audio graph driver. Idea is vendors can
have a thin driver and re-use common stuff from audio graph driver.

 - graph_card_probe()
 - graph_parse_of()

In doing so a new header file is added for above. The graph_probe()
function is simplified by moving more common stuff to graph_parse_of().
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-8-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add new members in struct 'asoc_simple_priv'. Idea is to leverage
simple or graph card driver as much as possible and vendor can
maintain a thin driver to control the behavior by populating these
newly exposed members.

Following are the members added in 'asoc_simple_priv':

  - 'ops' struct: In some cases SoC vendor drivers may want to
    implement 'snd_soc_ops' callbacks differently. In such cases
    custom callbacks would be used.

  - 'force_dpcm' flag: Right now simple or graph card drivers
    detect DAI links as DPCM links if:

      * The dpcm_selectable is set AND
      * Codec is connected to multiple CPU endpoints or aconvert
        property is used for rate/channels.

    So there is no way to directly specify usage of DPCM alone. So a
    flag is exposed to mark all links as DPCM. Vendor driver can
    set this if required.

  - 'dpcm_selectable': Currently simple or audio graph drivers
    provide a way to enable this for specific compatibles. However
    vendor driver may want to define some additional info. Thus
    expose this variable where vendor drivers can set this if
    required.

Audio graph driver is updated to consider above flags or callbacks.
Subsequent patches in the series illustrate usage for above.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-7-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

For open platforms, which can support pluggable audio cards, Codec
endpoint is not fixed always. It actually depends on the compatible
HW module that is going to be connected. From SoC side the given I/O
interface is always available. Hence such links have fixed CPU endpoint
but no Codec endpoint. This patch helps to support such links where
user can populate Codec endpoint only and its fields in Platform DT
depending on the plugged HW.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-6-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

PCM devices are created for FE dai links with 'no-pcm' flag as '0'.
Such DAI links have CPU component which implement either pcm_construct()
or pcm_new() at component or dai level respectively. Based on this,
current patch exposes a helper function to identify such components
and populate 'no_pcm' flag for DPCM DAI link.

This helps to have BE<->BE component links where PCM devices need
not be created for CPU component involved in such links.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-5-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

For multiple instances of components, using DAI name alone for DAI links
is causing conflicts. Components can define multiple DAIs and hence using
just a device name won't help either. Thus DT device node reference and
DAI names are used to uniquely represent DAI link names.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1604329814-24779-4-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

dpcm_end_walk_at_be() stops the graph walk when first BE is found for
the given FE component. In a component model we may want to connect
multiple DAIs from different components. A new flag is introduced in
'snd_soc_card', which when set allows DAI/component chaining. Later
PCM operations can be called for all these listed components for a
valid DAPM path.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1604329814-24779-3-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "prefix" can be defined in DAI link node or it can be specified as
part of the component node itself. Currently "sound-name-prefix" defined
in a component is not taking effect. Actually the property is not getting
parsed. It can be fixed by parsing "sound-name-prefix" property whenever
"prefix" is missing in DAI link Codec node.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1604329814-24779-2-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "Modify documentation and machine driver for SC7180 sound card" from Ajye Huang <ajye.huang@gmail.com>:

Note:
- The patch is made by the collaboration of
 Ajye Huang <ajye_huang@compal.corp-partner.google.com>
 Cheng-Yi Chiang <cychiang@chromium.org>

v6:
- Documentation: Addressed suggestions from Rob Herring.
  - Define "maxItems: 1" in dmic-gpios property.
  - Only keep one example and add dmic-gpios property in.
v5:
- Machine driver:
  - Fix a format string warning (Reported-by: kernel test robot <lkp@intel.com>).
    detailed info at https://lore.kernel.org/patchwork/patch/1331087/

v4:
- Machine driver: Addressed suggestions from Tzung-Bi.
  - Remove redundant judgments in dmic_set() and dmic_get().
  - Remove 1 level indent of judgment of IS_ERR(data->dmic_sel).

v3:
- Machine driver: Addressed suggestions from Tzung-Bi.
  - Move variables "dmic_switch" and "dmic_sel" into struct sc7180_snd_data.
  - Remove redundant judgments in dmic_set().

v2:
- Documentation: Modify the dimc-gpios property description and examples.
- Machine driver:
  - Remove "qcom,sc7180-sndcard-rt5682-m98357-2mic" compatible
  - See gpio property and use anadditional control.

Thanks for the review!

Ajye Huang (2):
  ASoC: google: dt-bindings: modify machine bindings for two MICs case
  ASoC: qcom: sc7180: Modify machine driver for 2mic

 .../bindings/sound/google,sc7180-trogdor.yaml |  8 ++-
 sound/soc/qcom/sc7180.c                       | 61 +++++++++++++++++++
 2 files changed, 68 insertions(+), 1 deletion(-)

--
2.25.1

"Shane.Chien" <shane.chien@mediatek.com>:

From: "Shane.Chien" <shane.chien@mediatek.com>

This series of patches is to fix vaud18 power leakage problem.
vaud18 will be enable only when mt6359 audio path is turned on.

Change since v2:
 - fix dt-binnding syntex error

Change since v1:
 - use dapm regulator supply widget for vaud18 control.
 - add vaud18 regulator property in mt6359 dt-binding.

Shane.Chien (2):
  ASoC: Fix vaud18 power leakage of mt6359
  dt-bindings: mediatek: mt6359: Add new property for mt6359

 .../devicetree/bindings/sound/mt6359.yaml          |    9 +++++++
 sound/soc/codecs/mt6359.c                          |   25 +-------------------
 sound/soc/codecs/mt6359.h                          |    8 -------
 3 files changed, 10 insertions(+), 32 deletions(-)

--
1.7.9.5

Merge series "ASoC: soc-compress: tidyup STREAM vs COMPRESS" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

These are v2 of tidyup patch-set for SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx.
soc-compress is using both SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx, but mixed use.
This is confusable, but no problem. Because these are defined as UAPI and
are using same value.
This patch-set make sure these are same value.

v1 -> v2
	- checks COMPRESS vs PCM_STREAM by using BUILD_BUG_ON()

Link: https://lore.kernel.org/r/87wnzcfnkk.wl-kuninori.morimoto.gx@renesas.com

Kuninori Morimoto (2):
  ASoC: soc-compress: tidyup STREAM vs COMPRESS
  ASoC: soc-compress: assume SNDRV_PCM_STREAM_xxx and SND_COMPRESS_xxx are same

 sound/soc/soc-compress.c | 63 +++++++++++++++-------------------------
 1 file changed, 23 insertions(+), 40 deletions(-)

--
2.25.1

This patch is to revise the power event of EN_PIN dapm widget for symmetry.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20201110095823.3512447-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add codec driver for Nuvoton NAU8315.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201102023212.594137-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

soc-compress.c is using both SND_COMPRESS_xxx and SND_PCM_STREAM_xxx.
These are defined as UAPI, and has same value.

	enum {
		SNDRV_PCM_STREAM_PLAYBACK = 0,
		SNDRV_PCM_STREAM_CAPTURE,
		...
	};

	enum snd_compr_direction {
		SND_COMPRESS_PLAYBACK = 0,
		SND_COMPRESS_CAPTURE
	};

Essentially both COMPRESS and PCM_STREAM definitions are identical,
and can be never different because of ABI compatibility,
which means it's safe to mix both variants in the code.

This patch checks it by BUILD_BUG_ON(), and merge to use.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87361wmsyg.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

snd_soc_runtime_activate() and
snd_soc_dai_digital_mute() need SNDRV_PCM_STREAM_xxx
instead of SND_COMPRESS_xxx.

These are bug but nothing happen because these are same value.

	enum {
		SNDRV_PCM_STREAM_PLAYBACK = 0,
		SNDRV_PCM_STREAM_CAPTURE,
		...
	};

	enum snd_compr_direction {
		SND_COMPRESS_PLAYBACK = 0,
		SND_COMPRESS_CAPTURE
	};

This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kmcmsyn.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

In addition, having mixer control to switch between DMICs by
using "dmic-gpios" property.

Refer to this one as an example,
commit b7a742cf ("ASoC: AMD: Use mixer control to switch between DMICs")
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201106061433.1483129-3-ajye_huang@compal.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a property "dmic-gpios" for switching between two MICs.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201106061433.1483129-2-ajye_huang@compal.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch add "LDO_VAUD18-supply" property to
control vaud18 regulator. It is labeled as required
due to mt6359 audio path always need to enable vaud18.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-3-git-send-email-shane.chien@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

vaud18 is power of mt6359 audio path. It
should only enable when audio is used,
instead of in boot up stage.
Once mt6359 audio path is enabled or disabled,
vaud18 is controlled by regulator supply widget
"LDO_VAUD18". Due to vaud18 is controlled by
regulator dapm macro instead of regmap, the macro
MT6359_LDO_VAUD18_CON0 and variable avdd_reg
is no used and removed from mt6359.h.
Signed-off-by: Shane.Chien <shane.chien@mediatek.com>
Link: https://lore.kernel.org/r/1604975492-6142-2-git-send-email-shane.chien@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: ti: davinci-mcasp: Handle incomplete DT node gracefully" from Peter Ujfalusi <peter.ujfalusi@ti.com>:

Hi,

The series is inspired by the effort to standardize TI's arm64 dtsi files to keep
all nodes in 'okay' state and let the board dts files disable not needed
peripherals (and not properly configured):
https://lore.kernel.org/lkml/20201104224356.18040-1-nm@ti.com/

In the unlikely (or likely?) event when the dts misses to disable the McASP node
which is not configured we currenly and luckily just manage to not crash as we
had fixup code in place for legacy pdata boots.
This however prints out a message which does not really help to identify the
issue.

This series will reduce some of the noise during boot (first patch) then
adds the needed changes to handle the variations of 'okay':
A - have all required DT properties for audio
B - gpiochip is enabled

A && !B  -> everything is OK for audio, no gpiochip registered
A && B   -> everything is OK for audio, gpiochip is registered
!A && B  -> audio is not OK, gpiochip is registered. dev_dbg() for audio and do
            not register SOC DAI and PCM
!A && !B ->  audio is not OK, no gpiochip. dev_err() and fail the probe

Regards,
Peter
---
Peter Ujfalusi (4):
  ASoC: ti: davinci-mcasp: Use platform_get_irq_byname_optional
  ASoC: ti: davinci-mcasp: Remove legacy dma_request parsing
  ASoC: ti: davinci-mcasp: Simplify the configuration parameter handling
  ASoC: ti: davinci-mcasp: Handle missing required DT properties

 sound/soc/ti/davinci-mcasp.c | 294 ++++++++++++++---------------------
 1 file changed, 119 insertions(+), 175 deletions(-)

--
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

platform_get_irq() would print error message internally, so dev_err()
after platform_get_irq() is not needed
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1604715643-29507-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use PM ops snd_soc_pm_ops to handle suspend/resume like other machine
drivers.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20201109103415.607495-1-cychiang@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Modification for calibration to get better performance.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20201109062958.16917-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

McASP needs three required properties to be usable for audio:
op-mode, tdm-slots and the serial-dir array.

Instead of probing the driver even without the needed information we should
make sure that all the parameters are provided for operation.

The fact that McASP can act as a GPIO controller for it's pins complicates
this a bit, but as a general rule we can:
- we fail the probe if McASP is not configured to be used as gpiochip
- we will not register the DAI (and PCM) if gpiochip is defined
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-5-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Replace the davinci_mcasp_set_pdata_from_of() function which returned a
pdata pointer with davinci_mcasp_get_config() to return an actual error
code and handle all pdata validation and private mcasp struct setup in
there.

Drop the unused ram-size-playback and sram-size-capture query from DT at
the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-4-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

The legacy dma_request (which was holding the DMA request number) is no
longer in use for a long time.
All legacy platforms has been converted to dma_slave_map.

Remove it along with the DT parsing to get tx_dma_channel and
rx_dma_channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-3-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Depending on the integration of McASP either the 'common' or the
'rx' and 'tx' or only the 'tx' interrupt number is valid, provided.

By switching to platform_get_irq_byname_optional() we can clean up the
bootlog from messages like:

davinci-mcasp 2ba0000.mcasp: IRQ common not found

The irq number == 0 is not valid, fix the check at the same time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201106072551.689-2-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Rob, Mark
Cc: Sameer

These are v6 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.

v5 -> v6
	- add Acked-by/Reviewed-by on each patch
	- remove "audio-graph-card,xxx" property
	- remove un-needed if "ok"

v4 -> v5
	- move "endpoint" under "port"

v3 -> v4
	- fixuped yamllint warnings/errors

v2 -> v3
	- fixuped Rob's pointed points

v1 -> v2
	- upgrade dt-schema, and fixup errors for [2/2] patch

Kuninori Morimoto (3):
  dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support

 .../bindings/sound/audio-graph-card.txt       | 337 ------------
 .../bindings/sound/audio-graph-card.yaml      | 153 ++++++
 .../bindings/sound/renesas,rsnd.txt           | 520 ------------------
 .../bindings/sound/renesas,rsnd.yaml          | 451 +++++++++++++++
 4 files changed, 604 insertions(+), 857 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

--
2.25.1

Document R-Car M3-W+ (R8A77961) SoC bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87a6vwbavq.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87blgcbaw4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/87d00sbawh.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The AUD2HTX is a digital module that provides a bridge between
the Audio Subsystem and the HDMI RTX Subsystem. This module
includes intermediate storage to queue SDMA transactions prior
to being synchronized and passed to the HDMI RTX Subsystem over
the Audio Link.

The AUD2HTX contains a DMA request routed to the SDMA module.
This DMA request is controlled based on the watermark level in
the 32-entry sample buffer.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1604281947-26874-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
IP module found on i.MX8MP.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1604281947-26874-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

ecause clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter, so the additional checks are unnecessary, just
remove them.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20201029090104.29552-1-vulab@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Because clk_disable_unprepare() already checked NULL clock parameter,
so the additional check is unnecessary, just remove it.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20201029084137.28771-1-vulab@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

This patch fixes below warning when module is compiled with W=1 C=1

sound/soc/qcom/qdsp6/q6afe-clocks.c:122:18: warning: symbol 'q6afe_clks'
was not declared. Should it be static?

Fixes: 520a1c39 ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201105114435.22860-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>