- 22 Dec, 2016 4 commits
-
-
Karl Beldan authored
[ Upstream commit f6d7c1b5 ] This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9 ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e5 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Cc: <stable@vger.kernel.org> Signed-off-by:
Karl Beldan <kbeldan@baylibre.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Rob Clark authored
[ Upstream commit 89f82cbb ] Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Cc: stable@vger.kernel.org Reported-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Pawel Moll authored
[ Upstream commit 4e486cba ] The "Miscellaneous Node" fell through cracks of node initialisation, as its ID is shared with HN-I. This patch treats MN as a special case (which it is), adding separate validation check for it and pre-defining the node ID in relevant events descriptions. That way one can simply run: # perf stat -a -e ccn/mn_ecbarrier/ <workload> Additionally, direction in the MN pseudo-events XP watchpoint definitions is corrected to be "TX" (1) as they are defined from the crosspoint point of view (thus barriers are transmitted from XP to MN). Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
Pawel Moll authored
[ Upstream commit 8f06c51f ] Since 688d4dfc "perf tools: Support parsing parameterized events" the perf userspace tools understands "argument=?" syntax in the events file, making sure that required arguments are provided by the user and not defaulting to 0, causing confusion. This patch adds the required arguments lists for CCN events. Signed-off-by:
-
- 29 Nov, 2016 1 commit
-
-
Sasha Levin authored
Signed-off-by:
-
- 26 Nov, 2016 28 commits
-
-
Sebastian Andrzej Siewior authored
[ Upstream commit 8ae94224 ] Debian started to build the gcc with -fPIE by default so the kernel build ends before it starts properly with: |kernel/bounds.c:1:0: error: code model kernel does not support PIC mode Also add to KBUILD_AFLAGS due to: |gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S |arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Stefan Richter authored
[ Upstream commit e9300a4b ] RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Cc: stable@vger.kernel.org Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
[ Upstream commit 667121ac ] The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by:
Eyal Itkin <eyal.itkin@gmail.com> Reviewed-by:
-
John David Anglin authored
[ Upstream commit 6ed51832 ] We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Cc: <stable@vger.kernel.org> Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Miklos Szeredi authored
[ Upstream commit 641089c1 ] Make sure the copied up file hits the disk before renaming to the final destination. If this is not done then the copy-up may corrupt the data in the file in case of a crash. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 34563769 ] Commit c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e79 ("virtio: console: add locks around buffer removal in port unplug path") Cc: stable@vger.kernel.org Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 1217e1d1 ] mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Cc: stable@vger.kernel.org (v3.7+) Reported-by:
Viswesh <viswesh.vichu@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 5ed1df2e ] There can be a small window between the moment that recovery actually writes the last block and the time when various sysfs and /proc/mdstat attributes report that it has finished. During this time, 'sync_completed' can have the wrong value. This can confuse monitoring software. So: - don't set curr_resync_completed beyond the end of the devices, - set it correctly when resync/recovery has completed. Signed-off-by:
-
Ching Huang authored
[ Upstream commit 2bf7dc84 ] The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: <stable@vger.kernel.org> Signed-off-by:
Ching Huang <ching2048@areca.com.tw> Reported-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit 4d2b496f ] map_storep was not being vfree()'d in the module_exit call. Cc: <stable@vger.kernel.org> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 7dc86ef5 ] Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 4da5caa6 ] Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Carlos Santa <carlos.santa@intel.com> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
-
Dave Airlie authored
[ Upstream commit ccf03d69 ] This just removes the magic number. Acked-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 36e3fa6a ] The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666Signed-off-by:
-
James Hogan authored
[ Upstream commit e1e575f6 ] The advancing of the PC when completing an MMIO load is done before re-entering the guest, i.e. before restoring the guest ASID. However if the load is in a branch delay slot it may need to access guest code to read the prior branch instruction. This isn't safe in TLB mapped code at the moment, nor in the future when we'll access unmapped guest segments using direct user accessors too, as it could read the branch from host user memory instead. Therefore calculate the resume PC in advance while we're still in the right context and save it in the new vcpu->arch.io_pc (replacing the no longer needed vcpu->arch.pending_load_cause), and restore it on MMIO completion. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
James Hogan authored
[ Upstream commit ede5f3e7 ] The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 537b4b46 ] The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
-
Kashyap Desai authored
[ Upstream commit 1e793f6f ] Commit 02b01e01 ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e01 CC: stable@vger.kernel.org Signed-off-by:
Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by:
Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Michel Dänzer authored
[ Upstream commit 9dc79965 ] This reverts commit 1a738347. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857 Cc: stable@vger.kernel.org Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Sasha Levin authored
[ Upstream commit 80f23935 ] PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this instance the code comes directly from ISA v2.07, including the cmp, but cmpd is correct. Backport to stable so that new toolchains can build old kernels. Fixes: 948cf67c ("powerpc: Add NAP mode support on Power7 in HV mode") Cc: stable@vger.kernel.org # v3.0 Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Tom St Denis authored
[ Upstream commit fb9a5b0c ] Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Alex Deucher authored
[ Upstream commit 670bb4fd ] Add clock quirks for Jet parts. Reviewed-by:
Sonny Jiang <sonny.jiang@amd.com> Tested-by:
-
Johan Hovold authored
[ Upstream commit de24e0a1 ] The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Patrick Scheuring authored
[ Upstream commit da25311c ] The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by:
Patrick Scheuring <patrick.scheuring.dev@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit ef85f299 ] AZX_DCAPS_RIRB_PRE_DELAY is always tied with AZX_DCAPS_CTX_WORKAROUND, which is Creative's XFi specific. So, we can replace it and reduce one more bit free for DCAPS. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit ea720935 ] In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Cc: stable@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Richard Weinberger authored
[ Upstream commit a00052a2 ] Commit c83ed4c9 ("ubifs: Abort readdir upon error") broke overlayfs support because the fix exposed an internal error code to VFS. Reported-by:
Peter Rosin <peda@axentia.se> Tested-by:
Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Gerald Schaefer authored
[ Upstream commit a7a7aeef ] When interrupting an application which was allocating DMAable memory, it was possible, that the DMA memory was deallocated twice, leading to the error symptoms below. Thanks to Gerald, who analyzed the problem and provided this patch. I agree with his analysis of the problem: ddcb_cmd_fixups() -> genwqe_alloc_sync_sgl() (fails in f/lpage, but sgl->sgl != NULL and f/lpage maybe also != NULL) -> ddcb_cmd_cleanup() -> genwqe_free_sync_sgl() (double free, because sgl->sgl != NULL and f/lpage maybe also != NULL) In this scenario we would have exactly the kind of double free that would explain the WARNING / Bad page state, and as expected it is caused by broken error handling (cleanup). Using the Ubuntu git source, tag Ubuntu-4.4.0-33.52, he was able to reproduce the "Bad page state" issue, and with the patch on top he could not reproduce it any more. ------------[ cut here ]------------ WARNING: at /build/linux-o03cxz/linux-4.4.0/arch/s390/include/asm/pci_dma.h:141 Modules linked in: qeth_l2 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common genwqe_card qeth crc_itu_t qdio ccwgroup vmur dm_multipath dasd_eckd_mod dasd_mod CPU: 2 PID: 3293 Comm: genwqe_gunzip Not tainted 4.4.0-33-generic #52-Ubuntu task: 0000000032c7e270 ti: 00000000324e4000 task.ti: 00000000324e4000 Krnl PSW : 0404c00180000000 0000000000156346 (dma_update_cpu_trans+0x9e/0xa8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000324e7bcd 0000000000c3c34a 0000000027628298 000000003215b400 0000000000000400 0000000000001fff 0000000000000400 0000000116853000 07000000324e7b1e 0000000000000001 0000000000000001 0000000000000001 0000000000001000 0000000116854000 0000000000156402 00000000324e7a38 Krnl Code: 000000000015633a: 95001000 cli 0(%r1),0 000000000015633e: a774ffc3 brc 7,1562c4 #0000000000156342: a7f40001 brc 15,156344 >0000000000156346: 92011000 mvi 0(%r1),1 000000000015634a: a7f4ffbd brc 15,1562c4 000000000015634e: 0707 bcr 0,%r7 0000000000156350: c00400000000 brcl 0,156350 0000000000156356: eb7ff0500024 stmg %r7,%r15,80(%r15) Call Trace: ([<00000000001563e0>] dma_update_trans+0x90/0x228) [<00000000001565dc>] s390_dma_unmap_pages+0x64/0x160 [<00000000001567c2>] s390_dma_free+0x62/0x98 [<000003ff801310ce>] __genwqe_free_consistent+0x56/0x70 [genwqe_card] [<000003ff801316d0>] genwqe_free_sync_sgl+0xf8/0x160 [genwqe_card] [<000003ff8012bd6e>] ddcb_cmd_cleanup+0x86/0xa8 [genwqe_card] [<000003ff8012c1c0>] do_execute_ddcb+0x110/0x348 [genwqe_card] [<000003ff8012c914>] genwqe_ioctl+0x51c/0xc20 [genwqe_card] [<000000000032513a>] do_vfs_ioctl+0x3b2/0x518 [<0000000000325344>] SyS_ioctl+0xa4/0xb8 [<00000000007b86c6>] system_call+0xd6/0x264 [<000003ff9e8e520a>] 0x3ff9e8e520a Last Breaking-Event-Address: [<0000000000156342>] dma_update_cpu_trans+0x9a/0xa8 ---[ end trace 35996336235145c8 ]--- BUG: Bad page state in process jbd2/dasdb1-8 pfn:3215b page:000003d100c856c0 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x3fffc0000000000() page dumped because: nonzero _count Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 24 Nov, 2016 7 commits
-
-
Alexander Polakov authored
[ Upstream commit 1bc11d70 ] As described in https://bugzilla.kernel.org/show_bug.cgi?id=177821: After some analysis it seems to be that the problem is in alloc_super(). In case list_lru_init_memcg() fails it goes into destroy_super(), which calls list_lru_destroy(). And in list_lru_init() we see that in case memcg_init_list_lru() fails, lru->node is freed, but not set NULL, which then leads list_lru_destroy() to believe it is initialized and call memcg_destroy_list_lru(). memcg_destroy_list_lru() in turn can access lru->node[i].memcg_lrus, which is NULL. [akpm@linux-foundation.org: add comment] Signed-off-by:
Alexander Polakov <apolyakov@beget.ru> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chris Mason authored
[ Upstream commit 570dd450 ] btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the list because it knows all of the waiters are patiently waiting for the commit to finish. But, there's a small race where btrfs_sync_log can remove itself from the list if it finds a log commit is already done. Also, it uses list_del_init() to remove itself from the list, but there's no way to know if btrfs_remove_all_log_ctxs has already run, so we don't know for sure if it is safe to call list_del_init(). This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and just calls it with the proper locking. This is part two of the corruption fixed by cbd60aa7. I should have done this in the first place, but convinced myself the optimizations were safe. A 12 hour run of dbench 2048 will eventually trigger a list debug WARN_ON for the list_del_init() in btrfs_sync_log(). Fixes: d1433debReported-by:
Dave Jones <davej@codemonkey.org.uk> cc: stable@vger.kernel.org # 3.15+ Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Scot Doyle authored
[ Upstream commit 009e39ae ] When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.comReported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Scot Doyle <lkml14@scotdoyle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dmitry Vyukov authored
[ Upstream commit 32b2921e ] Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by:
-
Marcel Hasler authored
[ Upstream commit bdc3478f ] The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
David Howells authored
[ Upstream commit 03dab869 ] This fixes CVE-2016-7042. Fix a short sprintf buffer in proc_keys_show(). If the gcc stack protector is turned on, this can cause a panic due to stack corruption. The problem is that xbuf[] is not big enough to hold a 64-bit timeout rendered as weeks: (gdb) p 0xffffffffffffffffULL/(60*60*24*7) $2 = 30500568904943 That's 14 chars plus NUL, not 11 chars plus NUL. Expand the buffer to 16 chars. I think the unpatched code apparently works if the stack-protector is not enabled because on a 32-bit machine the buffer won't be overflowed and on a 64-bit machine there's a 64-bit aligned pointer at one side and an int that isn't checked again on the other side. The panic incurred looks something like: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81352ebe CPU: 0 PID: 1692 Comm: reproducer Not tainted 4.7.2-201.fc24.x86_64 #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 0000000000000086 00000000fbbd2679 ffff8800a044bc00 ffffffff813d941f ffffffff81a28d58 ffff8800a044bc98 ffff8800a044bc88 ffffffff811b2cb6 ffff880000000010 ffff8800a044bc98 ffff8800a044bc30 00000000fbbd2679 Call Trace: [<ffffffff813d941f>] dump_stack+0x63/0x84 [<ffffffff811b2cb6>] panic+0xde/0x22a [<ffffffff81352ebe>] ? proc_keys_show+0x3ce/0x3d0 [<ffffffff8109f7f9>] __stack_chk_fail+0x19/0x30 [<ffffffff81352ebe>] proc_keys_show+0x3ce/0x3d0 [<ffffffff81350410>] ? key_validate+0x50/0x50 [<ffffffff8134db30>] ? key_default_cmp+0x20/0x20 [<ffffffff8126b31c>] seq_read+0x2cc/0x390 [<ffffffff812b6b12>] proc_reg_read+0x42/0x70 [<ffffffff81244fc7>] __vfs_read+0x37/0x150 [<ffffffff81357020>] ? security_file_permission+0xa0/0xc0 [<ffffffff81246156>] vfs_read+0x96/0x130 [<ffffffff81247635>] SyS_read+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Reported-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Long Li authored
[ Upstream commit 407a3aee ] The host keeps sending heartbeat packets independent of the guest responding to them. Even though we respond to the heartbeat messages at interrupt level, we can have situations where there maybe multiple heartbeat messages pending that have not been responded to. For instance this occurs when the VM is paused and the host continues to send the heartbeat messages. Address this issue by draining and responding to all the heartbeat messages that maybe pending. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
