- 22 May, 2022 9 commits
-
-
Christophe Leroy authored
The following PPC_INST_XXX macros are not used anymore outside ppc-opcode.h: - PPC_INST_LD - PPC_INST_STD - PPC_INST_ADDIS - PPC_INST_ADD - PPC_INST_DIVD Remove them. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8c28636126f69141419953b5638b4a908c184dc1.1652074503.git.christophe.leroy@csgroup.eu
-
Christophe Leroy authored
Convert last users of PPC_INST_BL to PPC_RAW_BL() And remove PPC_INST_BL. Signed-off-by:
-
Christophe Leroy authored
Use PPC_LI_MASK and PPC_LI() instead of opencoding. Signed-off-by:
-
Christophe Leroy authored
Convert last users of PPC_INST_BRANCH to PPC_RAW_BRANCH() And remove PPC_INST_BRANCH. Signed-off-by:
-
Christophe Leroy authored
module_trampoline_target() is quite a hot path used when activating/deactivating function tracer. Avoid the heavy copy_from_kernel_nofault() by doing four calls to copy_inst_from_kernel_nofault(). Use __copy_inst_from_kernel_nofault() for the 3 last calls. First call is done to copy_from_kernel_nofault() to check address is within kernel space. No risk to wrap out the top of kernel space because the last page is never mapped so if address is in last page the first copy will fails and the other ones will never be performed. And also make it notrace just like all functions that call it. Signed-off-by:
-
Christophe Leroy authored
On the same model as get_user() versus __get_user(), introduce __copy_inst_from_kernel_nofault() which doesn't check address. To be used by callers that have already checked that the adress is a kernel address. Signed-off-by:
-
Christophe Leroy authored
A lot of #ifdefs can be replaced by IS_ENABLED() Do so. Signed-off-by:
-
Christophe Leroy authored
Avoid ifdefs around expected_nop_sequence(). While at it make it a bool. Signed-off-by:
-
Christophe Leroy authored
0x80000000 is SZ_2G. Use it. Signed-off-by:
-
- 19 May, 2022 30 commits
-
-
Christophe Leroy authored
PPC_RAW_xxx() macros are self explanatory and less error prone than open coding. Use them in ftrace.c Signed-off-by:
-
Christophe Leroy authored
To make it explicit, use BRANCH_SET_LINK instead of value 1 when calling create_branch(). Signed-off-by:
-
Christophe Leroy authored
ftrace_plt_tramps table is never filled so it is useless. Remove it. Signed-off-by:
-
Christophe Leroy authored
Since commit 0c0c5230 ("powerpc: Only support DYNAMIC_FTRACE not static"), CONFIG_DYNAMIC_FTRACE is always selected when CONFIG_FUNCTION_TRACER is selected. To avoid confusion and have the reader wonder what's happen when CONFIG_FUNCTION_TRACER is selected and CONFIG_DYNAMIC_FTRACE is not, use CONFIG_FUNCTION_TRACER in ifdefs instead of CONFIG_DYNAMIC_FTRACE. As CONFIG_FUNCTION_GRAPH_TRACER depends on CONFIG_FUNCTION_TRACER, ftrace.o doesn't need to appear for both symbols in Makefile. Then as ftrace.o is built only when CONFIG_FUNCTION_TRACER is selected ifdef CONFIG_FUNCTION_TRACER is not needed in ftrace.c, and since it implies CONFIG_DYNAMIC_FTRACE, CONFIG_DYNAMIC_FTRACE is not needed in ftrace.c Signed-off-by:
-
Christophe Leroy authored
Since commit 7bea7ac0 ("powerpc/syscalls: Fix syscall tracing") ftrace.o is not needed anymore for CONFIG_FTRACE_SYSCALLS. Signed-off-by:
-
Christophe Leroy authored
Since c93d4f6e ("powerpc/ftrace: Add module_trampoline_target() for PPC32"), __ftrace_make_nop() for PPC32 is very similar to the one for PPC64. Same for __ftrace_make_call(). Make them common. Signed-off-by:
-
Christophe Leroy authored
Now that we have CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2, get rid of all indirect detection of ABI version. Signed-off-by:
-
Christophe Leroy authored
Replace all uses of PPC64_ELF_ABI_v1 and PPC64_ELF_ABI_v2 by resp CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2. Signed-off-by:
-
Christophe Leroy authored
At the time being, we use CONFIG_CPU_LITTLE_ENDIAN and CONFIG_CPU_BIG_ENDIAN to pass -mabi=elfv1 or elfv2 to compiler, then define a PPC64_ELF_ABI_v1 or PPC64_ELF_ABI_v2 macro in asm/types.h based on _CALL_ELF define set by the compiler. Make it more straight forward with a CONFIG option that is directly usable. Signed-off-by:
-
Christophe Leroy authored
Instead of returning -EPERM when patch_instruction() fails, just return what patch_instruction returns. That simplifies ftrace_modify_code(): 0: 94 21 ff c0 stwu r1,-64(r1) 4: 93 e1 00 3c stw r31,60(r1) 8: 7c 7f 1b 79 mr. r31,r3 c: 40 80 00 30 bge 3c <ftrace_modify_code+0x3c> 10: 93 c1 00 38 stw r30,56(r1) 14: 7c 9e 23 78 mr r30,r4 18: 7c a4 2b 78 mr r4,r5 1c: 80 bf 00 00 lwz r5,0(r31) 20: 7c 1e 28 40 cmplw r30,r5 24: 40 82 00 34 bne 58 <ftrace_modify_code+0x58> 28: 83 c1 00 38 lwz r30,56(r1) 2c: 7f e3 fb 78 mr r3,r31 30: 83 e1 00 3c lwz r31,60(r1) 34: 38 21 00 40 addi r1,r1,64 38: 48 00 00 00 b 38 <ftrace_modify_code+0x38> 38: R_PPC_REL24 patch_instruction Before: 0: 94 21 ff c0 stwu r1,-64(r1) 4: 93 e1 00 3c stw r31,60(r1) 8: 7c 7f 1b 79 mr. r31,r3 c: 40 80 00 4c bge 58 <ftrace_modify_code+0x58> 10: 93 c1 00 38 stw r30,56(r1) 14: 7c 9e 23 78 mr r30,r4 18: 7c a4 2b 78 mr r4,r5 1c: 80 bf 00 00 lwz r5,0(r31) 20: 7c 08 02 a6 mflr r0 24: 90 01 00 44 stw r0,68(r1) 28: 7c 1e 28 40 cmplw r30,r5 2c: 40 82 00 48 bne 74 <ftrace_modify_code+0x74> 30: 7f e3 fb 78 mr r3,r31 34: 48 00 00 01 bl 34 <ftrace_modify_code+0x34> 34: R_PPC_REL24 patch_instruction 38: 80 01 00 44 lwz r0,68(r1) 3c: 20 63 00 00 subfic r3,r3,0 40: 83 c1 00 38 lwz r30,56(r1) 44: 7c 63 19 10 subfe r3,r3,r3 48: 7c 08 03 a6 mtlr r0 4c: 83 e1 00 3c lwz r31,60(r1) 50: 38 21 00 40 addi r1,r1,64 54: 4e 80 00 20 blr It improves ftrace activation/deactivation duration by about 3%. Modify patch_instruction() return on failure to -EPERM in order to match with ftrace expectations. Other users of patch_instruction() do not care about the exact error value returned. Signed-off-by:
-
Christophe Leroy authored
Inlining ftrace_modify_code(), it increases a bit the size of ftrace code but brings 5% improvment on ftrace activation. Usually in C files we let gcc decide what to do but here it really help to 'help' gcc to decide to inline, thought we don't want to force it with an __always_inline that would be too much for CONFIG_CC_OPTIMIZE_FOR_SIZE. Signed-off-by:
-
Christophe Leroy authored
create_branch() is a good candidate for inlining because: - Flags can be folded in. - Range tests are likely to be already done. Hence reducing the create_branch() to only a set of instructions. So inline it. It improves ftrace activation by 10%. Signed-off-by:
-
Christophe Leroy authored
Use is_offset_in_branch_range() instead of create_branch() to check if a target is within branch range. This patch together with the previous one improves ftrace activation time by 7% Signed-off-by:
-
Christophe Leroy authored
Test in is_offset_in_branch_range() and is_offset_in_cond_branch_range() are simple tests that are worth inlining. Signed-off-by:
-
Christophe Leroy authored
Since commit d5937db1 ("powerpc/code-patching: Fix patch_branch() return on out-of-range failure") patch_branch() fails with -ERANGE when trying to branch out of range. No need to perform the test twice. Remove redundant create_branch() calls. Signed-off-by:
-
Christophe Leroy authored
When we have CONFIG_DYNAMIC_FTRACE_WITH_ARGS, prepare_ftrace_return() is called by ftrace_graph_func() otherwise prepare_ftrace_return() is called from assembly. Refactor prepare_ftrace_return() into a static __prepare_ftrace_return() that will be called by both prepare_ftrace_return() and ftrace_graph_func(). It will allow GCC to fold __prepare_ftrace_return() inside ftrace_graph_func(). Signed-off-by:
-
Nicholas Piggin authored
rtas_call must not be called with the MMU disabled because in case of rtas error, log_error is called which requires MMU enabled. Add a test and warning for this. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
PAPR specifies that RTAS may be called with MSR[RI] enabled if the calling context is recoverable, and RTAS will manage RI as necessary. Call the rtas entry point with RI enabled, and add a check to ensure the caller has RI enabled. Signed-off-by:
-
Nicholas Piggin authored
On 64-bit, PACA is saved in a SPRG so it does not need to be saved on stack. We also don't need to mask off the top bits for real mode addresses because the architecture does this for us. Signed-off-by:
-
Nicholas Piggin authored
Disable MSR[EE] in C code rather than asm. Signed-off-by:
-
Nicholas Piggin authored
The code was moved verbatim including whitespace cruft. Fix that. Signed-off-by:
-
Nicholas Piggin authored
This symbol is marked nokprobe on 32-bit but not 64-bit, add it. Signed-off-by:
-
Nicholas Piggin authored
This makes working on the code a bit easier. Signed-off-by:
-
Nicholas Piggin authored
Implement the AT_MINSIGSTKSZ AUXV entry, allowing userspace to dynamically size stack allocations in a manner forward-compatible with new processor state saved in the signal frame For now these statically find the maximum signal frame size rather than doing any runtime testing of features to minimise the size. glibc 2.34 will take advantage of this, as will applications that use use _SC_MINSIGSTKSZ and _SC_SIGSTKSZ. Reviewed-by:
Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
The sad tale of SIGSTKSZ and MINSIGSTKSZ is documented in glibc.git commit f7c399cff5bd ("PowerPC SIGSTKSZ"), which explains why glibc does not use the kernel defines for these constants. Since then in fact there has been a further expansion of the signal stack frame size on little-endian with linux commit 573ebfa6 ("powerpc: Increase stack redzone for 64-bit userspace to 512 bytes"), which has caused it to exceed even the glibc defines. See kernel commit 63dee5df ("powerpc: Allow 4224 bytes of stack expansion for the signal frame") for more details of the history of the expansion. Increase MINSIGSTKSZ to 8192 which is double the current glibc value and fits the current stack frame with room to grow. SIGSTKSZ is set to 4x the minimum as convention. glibc will have to be updated as well. Reviewed-by: -
Nathan Chancellor authored
The PowerPC vDSO uses $(CC) to link, which differs from the rest of the kernel, which uses $(LD) directly. As a result, the default linker of the compiler is used, which may differ from the linker requested by the builder. For example: $ make ARCH=powerpc LLVM=1 mrproper defconfig arch/powerpc/kernel/vdso/ ... $ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg File: arch/powerpc/kernel/vdso/vdso32.so.dbg String dump of section '.comment': [ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37) File: arch/powerpc/kernel/vdso/vdso64.so.dbg String dump of section '.comment': [ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37) LLVM=1 sets LD=ld.lld but ld.lld is not used to link the vDSO; GNU ld is because "ld" is the default linker for clang on most Linux platforms. This is a problem for Clang's Link Time Optimization as implemented in the kernel because use of GNU ld with LTO requires the LLVMgold plugin, which is not technically supported for ld.bfd per https://llvm.org/docs/GoldPlugin.html. Furthermore, if LLVMgold.so is missing from a user's system, the build will fail, even though LTO as it is implemented in the kernel requires ld.lld to avoid this dependency in the first place. Ultimately, the PowerPC vDSO should be converted to compiling and linking with $(CC) and $(LD) respectively but there were issues last time this was tried, potentially due to older but supported tool versions. To avoid regressing GCC + binutils, use the compiler option '-fuse-ld', which tells the compiler which linker to use when it is invoked as both the compiler and linker. Use '-fuse-ld=lld' when LD=ld.lld has been specified (CONFIG_LD_IS_LLD) so that the vDSO is linked with the same linker as the rest of the kernel. $ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg File: arch/powerpc/kernel/vdso/vdso32.so.dbg String dump of section '.comment': [ 0] Linker: LLD 14.0.0 [ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37) File: arch/powerpc/kernel/vdso/vdso64.so.dbg String dump of section '.comment': [ 0] Linker: LLD 14.0.0 [ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37) LD can be a full path to ld.lld, which will not be handled properly by '-fuse-ld=lld' if the full path to ld.lld is outside of the compiler's search path. '-fuse-ld' can take a path to the linker but it is deprecated in clang 12.0.0; '--ld-path' is preferred for this scenario. Use '--ld-path' if it is supported, as it will handle a full path or just 'ld.lld' properly. See the LLVM commit below for the full details of '--ld-path'. Signed-off-by:Nathan Chancellor <nathan@kernel.org> Tested-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
-
Nathan Chancellor authored
When linking vdso{32,64}.so.dbg with ld.lld, there is a warning about not finding _start for the starting address: ld.lld: warning: cannot find entry symbol _start; not setting start address ld.lld: warning: cannot find entry symbol _start; not setting start address Looking at GCC + GNU ld, the entry point address is 0x0: $ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):" File: vdso32.so.dbg Entry point address: 0x0 File: vdso64.so.dbg Entry point address: 0x0 This matches what ld.lld emits: $ powerpc64le-linux-gnu-readelf -p .comment vdso{32,64}.so.dbg File: vdso32.so.dbg String dump of section '.comment': [ 0] Linker: LLD 14.0.0 [ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37) File: vdso64.so.dbg String dump of section '.comment': [ 0] Linker: LLD 14.0.0 [ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37) $ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):" File: vdso32.so.dbg Entry point address: 0x0 File: vdso64.so.dbg Entry point address: 0x0 Remove ENTRY to remove the warning, as it is unnecessary for the vDSO to function correctly. Signed-off-by: -
Kevin Hao authored
When the mmu_feature_keys[] was introduced in the commit c12e6f24 ("powerpc: Add option to use jump label for mmu_has_feature()"), it is unlikely that it would be used either directly or indirectly in the out of tree modules. So we exported it as GPL only. But with the evolution of the codes, especially the PPC_KUAP support, it may be indirectly referenced by some primitive macro or inline functions such as get_user() or __copy_from_user_inatomic(), this will make it impossible to build many non GPL modules (such as ZFS) on ppc architecture. Fix this by exposing the mmu_feature_keys[] to the non-GPL modules too. Fixes: 7613f5a6 ("powerpc/64s/kuap: Use mmu_has_feature()") Reported-by:
Nathaniel Filardo <nwfilardo@gmail.com> Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Guilherme G. Piccoli authored
The panic notifiers infrastructure is a bit limited in the scope of the callbacks - basically every kind of functionality is dropped in a list that runs in the same point during the kernel panic path. This is not really on par with the complexities and particularities of architecture / hypervisors' needs, and a refactor is ongoing. As part of this refactor, it was observed that powerpc has 2 notifiers, with mixed goals: one is just a KASLR offset dumper, whereas the other aims to hard-disable IRQs (necessary on panic path), warn firmware of the panic event (fadump) and run low-level platform-specific machinery that might stop kernel execution and never come back. Clearly, the 2nd notifier has opposed goals: disable IRQs / fadump should run earlier while low-level platform actions should run late since it might not even return. Hence, this patch decouples the notifiers splitting them in three: - First one is responsible for hard-disable IRQs and fadump, should run early; - The kernel KASLR offset dumper is really an informative notifier, harmless and may run at any moment in the panic path; - The last notifier should run last, since it aims to perform low-level actions for specific platforms, and might never return. It is also only registered for 2 platforms, pseries and ps3. The patch better documents the notifiers and clears the code too, also removing a useless header. Currently no functionality change should be observed, but after the planned panic refactor we should expect more panic reliability with this patch. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Merge our KVM topic branch.
-
- 18 May, 2022 1 commit
-
-
Fabiano Rosas authored
We removed most of the vcore logic from the P9 path but there's still a tracepoint that tried to dereference vc->runner. Fixes: ecb6a720 ("KVM: PPC: Book3S HV P9: Remove most of the vcore logic") Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by:
-
