With ARCH=arm, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/cppi41.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-arm-drivers-dma-ti-v1-1-496d243158dd@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

With ARCH=loongarch, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/virt-dma.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240616-md-loongarch-drivers-dma-virt-dma-v1-1-70ed3dcbf8aa@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Unlike other channel counts in CAPx registers, BCDMA BCHAN CNT doesn't
include UHC and HC BC channels. So include them explicitly to arrive at
total BC channel in the instance.

Fixes: 88448980 ("dmaengine: ti: k3-udma: Add support for BCDMA channel TPL handling")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20240607-bcdma_chan_cnt-v2-1-bf1a55529d91@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix the below lockdep assert warning by holding vc.lock for
vchan_get_all_descriptors().

WARNING: virt-dma.h:188 rz_dmac_terminate_all
pc : rz_dmac_terminate_all
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240625170119.173595-1-biju.das.jz@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Dmaengine topic
 - New device_prep_peripheral_dma_vec, documentation and user

Document the dmaengine_prep_peripheral_dma_vec() API function, the
device_prep_peripheral_dma_vec() backend function, and the dma_vec
struct.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240620122726.41232-8-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add implementation of the .device_prep_peripheral_dma_vec() callback.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240620122726.41232-3-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

This function can be used to initiate a scatter-gather DMA transfer,
where the address and size of each segment is located in one entry of
the dma_vec array.

The major difference with dmaengine_prep_slave_sg() is that it supports
specifying the lengths of each DMA transfer; as trying to override the
length of the transfer with dmaengine_prep_slave_sg() is a very tedious
process. The introduction of a new API function is also justified by the
fact that scatterlists are on their way out.

Note that dmaengine_prep_interleaved_dma() is not helpful either in that
case, as it assumes that the address of each segment will be higher than
the one of the previous segment, which we just cannot guarantee in case
of a scatter-gather transfer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240620122726.41232-2-paul@crapouillou.netSigned-off-by: Vinod Koul <vkoul@kernel.org>

The calls write_lock/unlock_irq() disables and re-enables the IRQs.
Calling spin_lock_irqsave() and spin_lock_restore() when the IRQs are
already disabled doesn't do anything and just makes the code confusing.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/8be473eb-65e0-42b4-b574-e61c3a7f62d8@moroto.mountainSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
that both source and destination addresses need pass through the IOMMU.
Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
only one of the source or destination to go through it.

Set "is_remote" to true to ensure both source and destination
addresses pass through the IOMMU.

iMX8 Spec define "Local" and "Remote" bus as below.
Local bus: bypass IOMMU to directly access other peripheral register,
such as FIFO.
Remote bus: go through IOMMU to access system memory.

The test fail log as follow:
[ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
[ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)

Fixes: 72f5801a ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

'reg_info' was never used since it's initial
commit 5d0c3533 ("dmaengine: qcom: Add GPI dma driver")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240517234024.231477-1-linux@treblig.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove unused struct 'moxart_filter_data'
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240516152825.262578-1-linux@treblig.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert binding doc from txt to yaml.

Re-order interrupt-names to align example.
Add #dma-cell in example.
Change 'reg' in example to 32bit address.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240528163734.2471268-1-Frank.Li@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The 'idle' in fsl_chan is redundant as it's equivalent to
'status != DMA_IN_PROGRESS'. So remote it to simple code logic.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240603152317.69917-2-Frank.Li@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The edma feature individual IRQs for each DMA channel at some devices.
Given the presence of numerous eDMA instances, each with multiple channels,
IRQ request during probe results in an extensive list at /proc/interrupts.
However, a significant portion of these channels remains unused by the
system.

Request irq only when a DMA client driver requests a DMA channel.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240603152317.69917-1-Frank.Li@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

On STM32 DMA3, channels can be reserved, so they are non available for
Linux. This non-availability creates a mismatch between dma_chan id and
DMA3 channel id.

Use dma_async_device_channel_register() to register the channels
after controller registration and change the default channel name, so that
it can match the name in the Reference Manual and ease requesting a channel
thanks to its name.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-12-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Channel device name is used for sysfs, but also by dmatest filter function.

With dynamic channel registration, channels can be registered after dma
controller registration. Users may want to have specific channel names.

If name is NULL, the channel name relies on previous implementation,
dma<controller_device_id>chan<channel_device_id>.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-11-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Implement own device_tx_status ops to compute the residue with a finer
granularity, up to bytes.
STM32 DMA3 has a bitfield, BNDT, in CxTR1 register which reflects the
number of bytes read from the source.
It also has a bitfield, FIFOL, in CxSR register which reflects the FIFO
level in units of programmed destination data width.
The channel is briefly suspended to get a coherent snapshot of registers.
It is possible to correct the fifo level when packing/unpacking is enabled
with destination increment.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-10-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

STM32 DMA3 controller is able to suspend an ongoing transfer (the transfer
is suspended after the ongoing burst is flushed to the destination) and
resume it from the point it was suspended. No need to reconfigure any
register.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-9-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add DMA_MEMCPY capability and relative device_prep_dma_memcpy ops with
stm32_dma3_prep_dma_memcpy(). It reuses stm32_dma3_chan_prep_hw() and
stm32_dma3_prep_hwdesc() helpers.
As this driver relies on both device_config and of_xlate ops to
pre-configure the channel for transfer, add a new helper
(stm32_dma3_init_chan_config_for_memcpy) in case the channel is used
without being pre-configured (with DT and/or dmaengine_slave_config()).
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-8-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add DMA_CYCLIC capability and relative device_prep_dma_cyclic ops with
stm32_dma3_prep_dma_cyclic(). It reuses stm32_dma3_chan_prep_hw() and
stm32_dma3_chan_prep_hwdesc() helpers.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-7-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

STM32 DMA3 driver supports the 3 hardware configurations of the STM32 DMA3
controller:
- LPDMA (Low Power): 4 channels, no FIFO
- GPDMA (General Purpose): 16 channels, FIFO from 8 to 32 bytes
- HPDMA (High Performance): 16 channels, FIFO from 8 to 256 bytes
Hardware configuration of the channels is retrieved from the hardware
configuration registers.

The client can specify its channel requirements through device tree.
STM32 DMA3 channels can be individually reserved either because they are
secure, or dedicated to another CPU.
Indeed, channels availability depends on Resource Isolation Framework
(RIF) configuration. RIF grants access to buses with Compartment ID (CID)
filtering, secure and privilege level. It also assigns DMA channels to one
or several processors.
DMA channels used by Linux should be CID-filtered and statically assigned
to CID1 or shared with other CPUs but using semaphore. In case CID
filtering is not configured, dma-channel-mask property can be used to
specify available DMA channels to the kernel, otherwise such channels
will be marked as reserved and can't be used by Linux.

STM32 DMA3 is a new STM32 DMA controller, not a new version of an existing
one.
stm32-dma is not considered for reuse because register layout is completely
different and doesn't rely on descriptors mechanism.
stm32-mdma is based on descriptors mechanism but there are significant
differences in register layout and descriptors structure.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-6-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The STM32 DMA3 is a Direct Memory Access controller with different features
depending on its hardware configuration.
The channels have not the same capabilities, some have a larger FIFO, so
their performance is higher.
This patch describes STM32 DMA3 bindings, used to select a channel that
fits client requirements, and to pre-configure the channel depending on
the client needs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-5-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add an entry to make myself a maintainer of STM32 DMA controllers drivers
and documentation.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-4-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Gather the STM32 DMA controllers under drivers/dma/stm32/
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-3-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Gather the STM32 DMA controllers bindings under ./dma/stm32/.
Then fix reference to old path in spi/st,stm32-spi.yaml: update the dmas
property description by referring to all STM32 DMA controllers bindings.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20240531150712.2503554-2-amelie.delaunay@foss.st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove list_del call in msgdma_chan_desc_cleanup, this should be the role
of msgdma_free_descriptor. In consequence replace list_add_tail with
list_move_tail in msgdma_free_descriptor.

This fixes the path:
   msgdma_free_chan_resources -> msgdma_free_descriptors ->
   msgdma_free_desc_list -> msgdma_free_descriptor

which does not correctly free the descriptors as first nodes were not
removed from the list.
Signed-off-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Tested-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Link: https://lore.kernel.org/r/20240608213216.25087-3-olivierdautricourt@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

msgdma_chan_desc_cleanup iterates the done list for each completed
descriptor while we need to do it once after all descriptors are
completed.

This fixes a Sparse warning because we first take the lock in
msgdma_tasklet.
- Move locking to msgdma_chan_desc_cleanup.
- Move call to msgdma_chan_desc_cleanup outside of the critical section of
msgdma_tasklet.

Inspired by: commit 16ed0ef3 ("dmaengine: zynqmp_dma: cleanup after
                                   completing all descriptors")
Signed-off-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Tested-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Suggested-by: Eric Schwarz <eas@sw-optimization.com>
Link: https://lore.kernel.org/r/20240608213216.25087-2-olivierdautricourt@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

As we first take the lock with spin_lock_irqsave in msgdma_tasklet, Lockdep
might complain about this. Inspired by commit 9558cf4a
("dmaengine: zynqmp_dma: fix lockdep warning in tasklet")
Signed-off-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Tested-by: Olivier Dautricourt <olivierdautricourt@gmail.com>
Suggested-by: Eric Schwarz <eas@sw-optimization.com>
Link: https://lore.kernel.org/r/20240608213216.25087-1-olivierdautricourt@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/qcom/hdma_mgmt.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/qcom/hdma.o

Add the missing invocations of the MODULE_DESCRIPTION() macro, using
the descriptions from the associated Kconfig items.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240603-md-drivers-dma-qcom-v1-1-d1bd919352bf@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The SDMA firmware is optional and a usable fallback to the internal
ROM firmware is present in the driver. There is already a message
printed informing the user that the internal firmware is used, so
there is no need to print a scary warning for what is normal operation
on most systems.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20240516102532.213874-2-l.stach@pengutronix.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Device drivers with optional firmware may still want to use the
asynchronous firmware loading interface. To avoid printing a
warning into the kernel log when the optional firmware is
absent, add a nowarn variant of this interface.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240516102532.213874-1-l.stach@pengutronix.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert the fsl i.MX DMA controller bindings to DT schema. Remove old
and deprecated properties #dma-channels and #dma-requests.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240605003356.46458-1-animeshagarwal28@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240604130714.185681-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/idxd/idxd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ti/omap-dma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/dmatest.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/dma/ioat/ioatdma.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240606-md-drivers-dma-v2-1-0770dfdf74dd@quicinc.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts