- 22 Oct, 2015 39 commits
-
-
Guenter Roeck authored
commit 728d2940 upstream. The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by:
Grazvydas Ignotas <notasas@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dominik Dingel authored
commit 00cc1633 upstream. Commit 2ee507c4 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f7819512 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ezequiel Garcia authored
commit 8a340dbb upstream. Commit c631f200 ("watchdog: imgpdc: Add reboot support") introduced a restart handler but forgot to unregister it on driver removal. Fix it. Fixes: c631f200 ("watchdog: imgpdc: Add reboot support") Reported-by:
Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Francesco Lavra authored
commit 0919e444 upstream. Commit f2147de3 ("watchdog: sunxi: support parameterized compatible strings") introduced a regression in sunxi_wdt_start(), by which the system reset function of the watchdog is not enabled upon starting the watchdog. As a result, the system is not reset when the watchdog expires. Fix it. Fixes: f2147de3 ("watchdog: sunxi: support parameterized compatible strings") Signed-off-by:
Francesco Lavra <francescolavra.fl@gmail.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by:
-
Vineet Gupta authored
commit 3ebb0540 upstream. Newer bitfiles needs the reduced clk even for SMP builds Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 266fa2b2 upstream. We have map_groups__find_by_name() to look at the list of modules that are in place for a given machine, so use it instead of traversing the machine dso list, which also includes DSOs for userspace. When merging the user and kernel DSO lists a bug was introduced where 'perf probe' stopped being able to add probes to modules using its short name: # perf probe -m usbnet --add usbnet_start_xmit usbnet_start_xmit is out of .text, skip it. Error: Failed to add events. # With this fix it works again: # perf probe -m usbnet --add usbnet_start_xmit Added new event: probe:usbnet_start_xmit (on usbnet_start_xmit in usbnet) You can now use it in all perf tools, such as: perf record -e probe:usbnet_start_xmit -aR sleep 1 # Reported-by:
Wang Nan <wangnan0@huawei.com> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Fixes: 3d39ac53 ("perf machine: No need to have two DSOs lists") Link: http://lkml.kernel.org/r/20150924015008.GE1897@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit caa47047 upstream. The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: fbe96f29 ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/20150911153323.GP23511@kernel.orgSigned-off-by:
-
Jiri Olsa authored
commit 5ad4da43 upstream. Following commit changed parse_events_add_pmu interface: 36adec85 perf tools: Change parse_events_add_pmu interface but forgot to change one caller. Because of lessen compilation rules for the bison parser, the compiler did not warn on that. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: 36adec85 ("perf tools: Change parse_events_add_pmu interface") Link: http://lkml.kernel.org/r/1441180605-24737-2-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Ben Hutchings authored
commit 93df8a1e upstream. perf currently fails to build on MIPS as there is no tools/perf/arch/mips/Build file. Adding an empty file fixes this as there are no MIPS-specific sources to build. It looks like the same is needed for Alpha and PA-RISC, though I haven't been able to test those. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 5e8c0fb6 ("perf build: Add arch x86 objects building") Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1438704627.7315.2.camel@decadent.org.ukSigned-off-by:
-
Wang Nan authored
commit 5a023b57 upstream. Commit 7b6ff0bd ("perf probe ppc64le: Fixup function entry if using kallsyms lookup") adds 'struct map' into probe-event.h but not forward declares it. This patch fixes it. Signed-off-by:
-
Kan Liang authored
commit 601083cf upstream. print_aggr() fails to print per-core/per-socket statistics after commit 582ec082 ("perf stat: Fix per-socket output bug for uncore events") if events have differnt cpus. Because in print_aggr(), aggr_get_id needs index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be used to get aggregated id. Here is an example: Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has cpumask 0,18) $ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2 Without this patch, it failes to get CPU 18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 7526851 cycles S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/ S1-C0 0 <not counted> cycles S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/ With this patch, it can get both CPU0 and CPU18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 6327768 cycles S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/ S1-C0 1 330228 cycles S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/ Signed-off-by:
Kan Liang <kan.liang@intel.com> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 582ec082 ("perf stat: Fix per-socket output bug for uncore events") Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit e8e6d37e upstream. When we introduce a new sort key, we need to update the hists__calc_col_len() function accordingly, otherwise the width will be limited to strlen(header). We can't update it when obtaining a line value for a column (for instance, in sort__srcline_cmp()), because we reset it all when doing a resort (see hists__output_recalc_col_len()), so we need to, from what is in the hist_entry fields, set each of the column widths. Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 409a8be6 ("perf tools: Add sort by src line/number") Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.orgSigned-off-by:
-
Stephen Boyd authored
commit 8ded1e1a upstream. For PPI based PMUs, we bail out early in of_pmu_irq_cfg() without setting the PMU's supported_cpus bitmap. This causes the smp_call_function_any() in armv7_probe_num_events() to fail. Set the bitmap to be all CPUs so that we properly probe PMUs that use PPIs. Fixes: cc88116d ("arm: perf: treat PMUs as CPU affine") Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Adrian Hunter authored
commit b5cabbcb upstream. A copy of /proc/kcore containing the kernel text can be made to the buildid cache. e.g. perf buildid-cache -v -k /proc/kcore To workaround objdump limitations, a copy is also made when annotating against /proc/kcore. The copying process stops working from libelf about v1.62 onwards (the problem was found with v1.63). The cause is that a call to gelf_getphdr() in kcore__add_phdr() fails because additional validation has been added to gelf_getphdr(). The use of gelf_getphdr() is a misguided attempt to get default initialization of the Gelf_Phdr structure. That should not be necessary because every member of the Gelf_Phdr structure is subsequently assigned. So just remove the call to gelf_getphdr(). Similarly, a call to gelf_getehdr() in gelf_kcore__init() can be removed also. Committer notes: Note to stable@kernel.org, from Adrian in the cover letter for this patchkit: The "Fix copying of /proc/kcore" problem goes back to v3.13 if you think it is important enough for stable. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1443089122-19082-3-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Peter Zijlstra authored
commit a6b27785 upstream. Only emit the test-and-set fallback for Hypervisors lacking PARAVIRT_SPINLOCKS support when building for guests. Suggested-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
commit 43b3f028 upstream. Dave ran into horrible performance on a VM without PARAVIRT_SPINLOCKS set and Linus noted that the test-and-set implementation was retarded. One should spin on the variable with a load, not a RMW. While there, remove 'queued' from the name, as the lock isn't queued at all, but a simple test-and-set. Suggested-by:
Dave Chinner <david@fromorbit.com> Tested-by:
-
Peter Zijlstra authored
commit ebfb4988 upstream. Sasha reported that we can get here with .idx==-1, and cpuc->event_constraints unallocated. Suggested-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Azael Avalos authored
commit 53147b6c upstream. Commit a2b3471b ("toshiba_acpi: Use the Hotkey Event Type function for keymap choosing") changed the *setup_keyboard function to query for the Hotkey Event Type to help choose the correct keymap, but turns out that here are certain Toshiba models out there not implementing this feature, and thus, failing to continue the input device registration and leaving such laptops without hotkey support. This patch changes such check, and instead of returning an error if the Hotkey Event Type is not present, we simply inform userspace about it, changing the message printed from err to notice, making the function responsible for registering the input device to continue. This issue was found on a Toshiba Portege Z30-B, but there might be some other models out there affected by this regression as well. Signed-off-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Jenny Derzhavetz authored
commit 3e03c4b0 upstream. The iscsi target core teardown sequence calls wait_conn for all active commands to finish gracefully by: - move the queue-pair to error state - drain all the completions - wait for the core to finish handling all session commands However, when tearing down a session while there are sequenced commands that are still waiting for unsolicited data outs, we can block forever as these are missing an extra reference put. We basically need the equivalent of iscsit_free_queue_reqs_for_conn() which is called after wait_conn has returned. Address this by an explicit walk on conn_cmd_list and put the extra reference. Signed-off-by:
Jenny Derzhavetz <jennyf@mellanox.com> Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Jenny Derzhavetz authored
commit a4c15cd9 upstream. As documented in iscsit_sequence_cmd: /* * Existing callers for iscsit_sequence_cmd() will silently * ignore commands with CMDSN_LOWER_THAN_EXP, so force this * return for CMDSN_MAXCMDSN_OVERRUN as well.. */ We need to silently finish a command when it's in ISTATE_REMOVE. This fixes an teardown hang we were seeing where a mis-behaved initiator (triggered by allocation error injections) sent us a cmdsn which was lower than expected. Signed-off-by:
-
Nicholas Bellinger authored
commit 3ccd6e83 upstream. This patch fixes a v4.2+ regression introduced by commit 79dc9c9e where lookup of t10_pr_registration->pr_reg_deve and associated ->pr_kref get was missing from __core_scsi3_do_alloc_registration(), which is responsible for setting DEF_PR_REG_ACTIVE. This would result in REGISTER operations completing successfully, but subsequent core_scsi3_pr_seq_non_holder() checking would fail with !DEF_PR_REG_ACTIVE -> RESERVATION CONFLICT status. Update __core_scsi3_add_registration() to drop ->pr_kref reference after registration and any optional ALL_TG_PT=1 processing has completed. Update core_scsi3_decode_spec_i_port() to release the new parent local_pr_reg->pr_kref as well. Also, update __core_scsi3_check_aptpl_registration() to perform the same target_nacl_find_deve() lookup + ->pr_kref get, now that __core_scsi3_add_registration() expects to drop the reference. Finally, since there are cases when se_dev_entry->se_lun_acl can still be dereferenced in core_scsi3_lunacl_undepend_item() while holding ->pr_kref, go ahead and move explicit rcu_assign_pointer() NULL assignments within core_disable_device_list_for_node() until after orig->pr_comp finishes. Reported-by:
Scott L. Lykens <scott@lykens.org> Tested-by:
-
Nicholas Bellinger authored
commit 4416f89b upstream. This patch is a >= v4.1 regression bug-fix where control CDB emulation logic in commit 38b57f82 now expects a se_cmd->se_sess pointer to exist when determining T10-PI support is to be exposed for initiator host ports. To address this bug, go ahead and add locally generated se_cmd descriptors for copy-offload block-copy to it's own stand-alone se_session nexus, while the parent EXTENDED_COPY se_cmd descriptor remains associated with it's originating se_cmd->se_sess nexus. Note a valid se_cmd->se_sess is also required for future support of WRITE_INSERT and READ_STRIP software emulation when submitting backend I/O to se_device that exposes T10-PI suport. Reported-by:
Alex Gorbachev <ag@iss-integration.com> Tested-by:
-
Michal Hocko authored
commit 537b604c upstream. b9d5c6b7 ("[SCSI] cleanup setting task state in scsi_error_handler()") has introduced a race between scsi_error_handler and scsi_host_dev_release resulting in the hang when the device goes away because scsi_error_handler might miss a wake up: CPU0 CPU1 scsi_error_handler scsi_host_dev_release kthread_stop() kthread_should_stop() test_bit(KTHREAD_SHOULD_STOP) set_bit(KTHREAD_SHOULD_STOP) wake_up_process() wait_for_completion() set_current_state(TASK_INTERRUPTIBLE) schedule() The most straightforward solution seems to be to invert the ordering of the set_current_state and kthread_should_stop. The issue has been noticed during reboot test on a 3.0 based kernel but the current code seems to be affected in the same way. [jejb: additional comment added] Reported-and-debugged-by:
Mike Mayer <Mike.Meyer@teradata.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Andy Grover authored
commit 76c28f1f upstream. Revert commit 1997e625, which causes double brackets on ipv6 inaddr_any addresses. Since we have np_sockaddr, if we need a textual representation we can use "%pISc". Change iscsit_add_network_portal() and iscsit_add_np() signatures to remove *ip_str parameter. Fix and extend some comments earlier in the function. Tested to work for :: and ::1 via iscsiadm, previously :: failed, see https://bugzilla.redhat.com/show_bug.cgi?id=1249107 . Signed-off-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
-
John Stultz authored
commit 2619d7e9 upstream. The internal clocksteering done for fine-grained error correction uses a logarithmic approximation, so any time adjtimex() adjusts the clock steering, timekeeping_freqadjust() quickly approximates the correct clock frequency over a series of ticks. Unfortunately, the logic in timekeeping_freqadjust(), introduced in commit: dc491596 ("timekeeping: Rework frequency adjustments to work better w/ nohz") used the abs() function with a s64 error value to calculate the size of the approximated adjustment to be made. Per include/linux/kernel.h: "abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()". Thus on 32-bit platforms, this resulted in the clocksteering to take a quite dampended random walk trying to converge on the proper frequency, which caused the adjustments to be made much slower then intended (most easily observed when large adjustments are made). This patch fixes the issue by using abs64() instead. Reported-by:
Nuno Gonçalves <nunojpg@gmail.com> Tested-by:
John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1441840051-20244-1-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
Paolo Bonzini authored
commit 625422f6 upstream. This reverts commit e098223b, which has a dependency on other commits being reverted. Signed-off-by:
-
Paolo Bonzini authored
commit fc07e76a upstream. This reverts commit 3c2e7f7d. Initializing the mapping from MTRR to PAT values was reported to fail nondeterministically, and it also caused extremely slow boot (due to caching getting disabled---bug 103321) with assigned devices. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Reported-by:
Sebastian Schuette <dracon@ewetel.net> Signed-off-by:
-
Paolo Bonzini authored
commit 606decd6 upstream. This reverts commit fd717f11. It was reported to cause Machine Check Exceptions (bug 104091). Reported-by: harn-solo@gmx.de Signed-off-by:
-
Gautham R. Shenoy authored
commit 7e022e71 upstream. In guest_exit_cont we call kvmhv_commence_exit which expects the trap number as the argument. However r3 doesn't contain the trap number at this point and as a result we would be calling the function with a spurious trap number. Fix this by copying r12 into r3 before calling kvmhv_commence_exit as r12 contains the trap number. Fixes: eddb60fbSigned-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Thomas Huth authored
commit 3eb4ee68 upstream. Access to the kvm->buses (like with the kvm_io_bus_read() and -write() functions) has to be protected via the kvm->srcu lock. The kvmppc_h_logical_ci_load() and -store() functions are missing this lock so far, so let's add it there, too. This fixes the problem that the kernel reports "suspicious RCU usage" when lock debugging is enabled. Fixes: 99342cf8Signed-off-by:
Thomas Huth <thuth@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 3afb1121 upstream. These have roughly the same purpose as the SMRR, which we do not need to implement in KVM. However, Linux accesses MSR_K8_TSEG_ADDR at boot, which causes problems when running a Xen dom0 under KVM. Just return 0, meaning that processor protection of SMRAM is not in effect. Reported-by:
M A Young <m.a.young@durham.ac.uk> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Igor Mammedov authored
commit ebae871a upstream. When INIT/SIPI sequence is sent to VCPU which before that was in use by OS, VMRUN might fail with: KVM: entry failed, hardware error 0xffffffff EAX=00000000 EBX=00000000 ECX=00000000 EDX=000006d3 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=00000000 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 00000000 0000ffff 00009300 CS =9a00 0009a000 0000ffff 00009a00 [...] CR0=60000010 CR2=b6f3e000 CR3=01942000 CR4=000007e0 [...] EFER=0000000000000000 with corresponding SVM error: KVM: FAILED VMRUN WITH VMCB: [...] cpl: 0 efer: 0000000000001000 cr0: 0000000080010010 cr2: 00007fd7fe85bf90 cr3: 0000000187d0c000 cr4: 0000000000000020 [...] What happens is that VCPU state right after offlinig: CR0: 0x80050033 EFER: 0xd01 CR4: 0x7e0 -> long mode with CR3 pointing to longmode page tables and when VCPU gets INIT/SIPI following transition happens CR0: 0 -> 0x60000010 EFER: 0x0 CR4: 0x7e0 -> paging disabled with stale CR3 However SVM under the hood puts VCPU in Paged Real Mode* which effectively translates CR0 0x60000010 -> 80010010 after svm_vcpu_reset() -> init_vmcb() -> kvm_set_cr0() -> svm_set_cr0() but from kvm_set_cr0() perspective CR0: 0 -> 0x60000010 only caching bits are changed and commit d81135a5 ("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed")' regressed svm_vcpu_reset() which relied on MMU being reset. As result VMRUN after svm_vcpu_reset() tries to run VCPU in Paged Real Mode with stale MMU context (longmode page tables), which causes some AMD CPUs** to bail out with VMEXIT_INVALID. Fix issue by unconditionally resetting MMU context at init_vmcb() time. * AMD64 Architecture Programmerâ€
™ s Manual, Volume 2: System Programming, rev: 3.25 15.19 Paged Real Mode ** Opteron 1216 Signed-off-by:Igor Mammedov <imammedo@redhat.com> Fixes: d81135a5Signed-off-by:
-
Marc Zyngier authored
commit 688bc577 upstream. When running a guest with the architected timer disabled (with QEMU and the kernel_irqchip=off option, for example), it is important to make sure the timer gets turned off. Otherwise, the guest may try to enable it anyway, leading to a screaming HW interrupt. The fix is to unconditionally turn off the virtual timer on guest exit. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Jason Wang authored
commit eefd6b06 upstream. We register wildcard mmio eventfd on two buses, once for KVM_MMIO_BUS and once on KVM_FAST_MMIO_BUS but with a single iodev instance. This will lead to an issue: kvm_io_bus_destroy() knows nothing about the devices on two buses pointing to a single dev. Which will lead to double free[1] during exit. Fix this by allocating two instances of iodevs then registering one on KVM_MMIO_BUS and another on KVM_FAST_MMIO_BUS. CPU: 1 PID: 2894 Comm: qemu-system-x86 Not tainted 3.19.0-26-generic #28-Ubuntu Hardware name: LENOVO 2356BG6/2356BG6, BIOS G7ET96WW (2.56 ) 09/12/2013 task: ffff88009ae0c4b0 ti: ffff88020e7f0000 task.ti: ffff88020e7f0000 RIP: 0010:[<ffffffffc07e25d8>] [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP: 0018:ffff88020e7f3bc8 EFLAGS: 00010292 RAX: dead000000200200 RBX: ffff8801ec19c900 RCX: 000000018200016d RDX: ffff8801ec19cf80 RSI: ffffea0008bf1d40 RDI: ffff8801ec19c900 RBP: ffff88020e7f3bd8 R08: 000000002fc75a01 R09: 000000018200016d R10: ffffffffc07df6ae R11: ffff88022fc75a98 R12: ffff88021e7cc000 R13: ffff88021e7cca48 R14: ffff88021e7cca50 R15: ffff8801ec19c880 FS: 00007fc1ee3e6700(0000) GS:ffff88023e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f389d8000 CR3: 000000023dc13000 CR4: 00000000001427e0 Stack: ffff88021e7cc000 0000000000000000 ffff88020e7f3be8 ffffffffc07e2622 ffff88020e7f3c38 ffffffffc07df69a ffff880232524160 ffff88020e792d80 0000000000000000 ffff880219b78c00 0000000000000008 ffff8802321686a8 Call Trace: [<ffffffffc07e2622>] ioeventfd_destructor+0x12/0x20 [kvm] [<ffffffffc07df69a>] kvm_put_kvm+0xca/0x210 [kvm] [<ffffffffc07df818>] kvm_vcpu_release+0x18/0x20 [kvm] [<ffffffff811f69f7>] __fput+0xe7/0x250 [<ffffffff811f6bae>] ____fput+0xe/0x10 [<ffffffff81093f04>] task_work_run+0xd4/0xf0 [<ffffffff81079358>] do_exit+0x368/0xa50 [<ffffffff81082c8f>] ? recalc_sigpending+0x1f/0x60 [<ffffffff81079ad5>] do_group_exit+0x45/0xb0 [<ffffffff81085c71>] get_signal+0x291/0x750 [<ffffffff810144d8>] do_signal+0x28/0xab0 [<ffffffff810f3a3b>] ? do_futex+0xdb/0x5d0 [<ffffffff810b7028>] ? __wake_up_locked_key+0x18/0x20 [<ffffffff810f3fa6>] ? SyS_futex+0x76/0x170 [<ffffffff81014fc9>] do_notify_resume+0x69/0xb0 [<ffffffff817cb9af>] int_signal+0x12/0x17 Code: 5d c3 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 83 ec 08 48 8b 7f 20 e8 06 d6 a5 c0 48 8b 43 08 48 8b 13 48 89 df 48 89 42 08 <48> 89 10 48 b8 00 01 10 00 00 RIP [<ffffffffc07e25d8>] ioeventfd_release+0x28/0x60 [kvm] RSP <ffff88020e7f3bc8> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Jason Wang authored
commit 85da11ca upstream. This patch factors out core eventfd assign/deassign logic and leaves the argument checking and bus index selection to callers. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jason Wang authored
commit 8f4216c7 upstream. Currently, if we had a zero length mmio eventfd assigned on KVM_MMIO_BUS. It will never be found by kvm_io_bus_cmp() since it always compares the kvm_io_range() with the length that guest wrote. This will cause e.g for vhost, kick will be trapped by qemu userspace instead of vhost. Fixing this by using zero length if an iodevice is zero length. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jason Wang authored
commit 8453fecb upstream. We only want zero length mmio eventfd to be registered on KVM_FAST_MMIO_BUS. So check this explicitly when arg->len is zero to make sure this. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Wanpeng Li authored
commit 04bb92e4 upstream. Reference SDM 28.1: The current VPID is 0000H in the following situations: - Outside VMX operation. (This includes operation in system-management mode under the default treatment of SMIs and SMM with VMX operation; see Section 34.14.) - In VMX root operation. - In VMX non-root operation when the “enable VPID” VM-execution control is 0. The VPID should never be 0000H in non-root operation when "enable VPID" VM-execution control is 1. However, commit 34a1cd60 ("kvm: x86: vmx: move some vmx setting from vmx_init() to hardware_setup()") remove the codes which reserve 0000H for VMX root operation. This patch fix it by again reserving 0000H for VMX root operation. Fixes: 34a1cd60Reported-by:
Wincy Van <fanwenyi0529@gmail.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
-
Marek Majtyka authored
commit ca09f02f upstream. A critical bug has been found in device memory stage1 translation for VMs with more then 4GB of address space. Once vm_pgoff size is smaller then pa (which is true for LPAE case, u32 and u64 respectively) some more significant bits of pa may be lost as a shift operation is performed on u32 and later cast onto u64. Example: vm_pgoff(u32)=0x00210030, PAGE_SHIFT=12 expected pa(u64): 0x0000002010030000 produced pa(u64): 0x0000000010030000 The fix is to change the order of operations (casting first onto phys_addr_t and then shifting). Reviewed-by:
Marek Majtyka <marek.majtyka@tieto.com> Signed-off-by:
-
- 03 Oct, 2015 1 commit
-
-
Greg Kroah-Hartman authored
-
