Using struct jr_outentry to specify the layout of JobR output ring is
not appropriate for all 64-bit SoC, since some of them, like i.MX8MQ,
use 32-bit pointers there which doesn't match 64-bit
dma_addr_t. Convert existing code to use explicit helper functions to
access any of the JobR output ring elements, so that the support for
i.MX8MQ can be added later. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Instead of selecting the implementation of
cpu_to_caam_dma()/caam_dma_to_cpu() at build time using the
preprocessor, convert the code to do that at run-time using IS_ENABLED
macro. This is needed to add support for i.MX8MQ. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to be able to configure CAAM pointer size at run-time, which
needed to support i.MX8MQ, which is 64-bit SoC with 32-bit pointer
size, convert CAAM_PTR_SZ to refer to a global variable of the same
name ("caam_ptr_sz") and adjust the rest of the code accordingly. No
functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Both qi.h and cammalg_qi2.h seem to define identical versions of
MAX_SDLEN. Move it to desc_constr.h to avoid duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since 32-bit of both wr_reg64 and rd_reg64 now use 64-bit IO helpers,
these functions should no longer be necessary. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Following the same transformation logic as outlined in previous commit
converting wr_reg64, convert rd_reg64 to use helpers from
<linux/io-64-nonatomic-hi-lo.h> first. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to be able to unify 64 and 32 bit implementations of
wr_reg64, let's convert it to use helpers from
<linux/io-64-nonatomic-hi-lo.h> first. Here are the steps of the
transformation:

1. Inline wr_reg32 helpers:

	if (!caam_imx && caam_little_end) {
		if (caam_little_end) {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		} else {
			iowrite32be(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32be(data, (u32 __iomem *)(reg));
		}
	} else {
		if (caam_little_end) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite32be(data >> 32, (u32 __iomem *)(reg));
			iowrite32be(data, (u32 __iomem *)(reg) + 1);
		}
	}

2. Transfrom the conditionals such that the check for
'caam_little_end' is at the top level:

	if (caam_little_end) {
		if (!caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		} else {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		}
	} else {
		iowrite32be(data >> 32, (u32 __iomem *)(reg));
		iowrite32be(data, (u32 __iomem *)(reg) + 1);
	}

3. Invert the check for !caam_imx:

	if (caam_little_end) {
		if (caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite32(data >> 32, (u32 __iomem *)(reg) + 1);
			iowrite32(data, (u32 __iomem *)(reg));
		}
	} else {
		iowrite32be(data >> 32, (u32 __iomem *)(reg));
		iowrite32be(data, (u32 __iomem *)(reg) + 1);
	}

4. Make use of iowrite64* helpers from <linux/io-64-nonatomic-hi-lo.h>

	if (caam_little_end) {
		if (caam_imx) {
			iowrite32(data >> 32, (u32 __iomem *)(reg));
			iowrite32(data, (u32 __iomem *)(reg) + 1);
		} else {
			iowrite64(data, reg);
		}
	} else {
		iowrite64be(data, reg);
	}

No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In order to avoid any risk of JR IRQ request being handled while some
of the resources used for that are not yet allocated move the code
requesting said IRQ to the endo of caam_jr_init().
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devres to allocate all of the resources in caam_jr_init() (DMA
coherent and regular memory, IRQs) drop calls to corresponding
deallocation routines. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify clock initialization code by converting it to use clk-bulk,
devres and soc_device_match() match table. No functional change
intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Exactly the same code to figure out DMA mask is repeated twice in the
driver code. To avoid repetition, move that logic into a standalone
subroutine in intern.h. While at it re-shuffle the code to make it
more readable with early returns.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use print_hex_dump_debug function to print debug messages, instead of
print_hex_dump inside #ifdef DEBUG.

Fixes: 6e005503 ("crypto: caam - print debug messages at debug level")
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Until now, the inside-secure driver required a set of firmware images
supplied by the silicon vendor, typically under NDA, to be present in
/lib/firmware/inside-secure in order to be able to function.
This patch removes the dependence on this official vendor firmware by
falling back to generic "mini" FW - developed specifically for this
driver - that can be provided under GPL 2.0 through linux-firmwares.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds support for a PCIE development board with FPGA from Xilinx,
to facilitate pre-silicon driver development by both Inside Secure and its
IP customers. Since Inside Secure neither produces nor has access to actual
silicon, this is required functionality to allow us to contribute.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This removes some code determine which engine has which algorithms which
was effectively redundant (may have been forward-looking?) due to always
enabling all algorithms for all currently supported engines.
A future patch will use a different, more scalable approach to achieve
this. This is removed now because otherwise the next patch will add new
hardware which would otherwise have to be added to all algorithms, so
now is a convenient time to just get rid of this.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While being a generic EIP97/EIP197 driver, the driver was only selectable
for Marvell Armada hardware. This fix makes the driver selectable for any
Device Tree supporting kernel configuration, allowing it to be used for
other compatible hardware by just adding the correct device tree entry.

It also allows the driver to be selected for PCI(E) supporting kernel con-
figurations, to be able to use it with PCIE based FPGA development boards
for pre-silicon driver development by both Inside Secure and its IP custo-
mers.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Align the s5p ctr(aes) implementation with other implementations
of the same mode, by setting the block size to 1.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The s5p skcipher driver returns -EINVAL for zero length inputs, which
deviates from the behavior of the generic ECB template, and causes fuzz
tests to fail. In cases where the input is not a multiple of the AES
block size (and the chaining mode is not CTR), it prints an error to
the kernel log, which is a thing we usually try to avoid in response
to situations that can be triggered by unprivileged users.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add an accelerated version of the 'essiv(cbc(aes),sha256)' skcipher,
which is used by fscrypt or dm-crypt on systems where CBC mode is
signficantly more performant than XTS mode (e.g., when using a h/w
accelerator which supports the former but not the latter) This avoids
a separate call into the AES cipher for every invocation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The plain CBC driver and the CTS one share some code that iterates over
a scatterwalk and invokes the CBC asm code to do the processing. The
upcoming ESSIV/CBC mode will clone that pattern for the third time, so
let's factor it out first.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a test vector for the ESSIV mode that is the most widely used,
i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes
(the latter is used by tcrypt to encapsulate the authenc template
or h/w instantiations of the same)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When building the new aegis128 NEON code in big endian mode, Clang
complains about the const uint8x16_t permute vectors in the following
way:

  crypto/aegis128-neon-inner.c:58:40: warning: vector initializers are not
      compatible with NEON intrinsics in big endian mode
      [-Wnonportable-vector-initialization]
                static const uint8x16_t shift_rows = {
                                                     ^
  crypto/aegis128-neon-inner.c:58:40: note: consider using vld1q_u8() to
      initialize a vector from memory, or vcombine_u8(vcreate_u8(), vcreate_u8())
      to initialize from integer constants

Since the same issue applies to the uint8x16x4_t loads of the AES Sbox,
update those references as well. However, since GCC does not implement
the vld1q_u8_x4() intrinsic, switch from IS_ENABLED() to a preprocessor
conditional to conditionally include this code.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The help section says that the module will be called 'pipcoxcell_crypto'.
This is likely a typo.
Use 'picoxcell_crypto' instead
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch removes the variable flags which is now unused thanks
to the new DES helpers.

Fixes: 9d574ae8 ("crypto: talitos/des - switch to new...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix build breakage caused by the DES library refactor.

Fixes: d4b90dbc ("crypto: n2/des - switch to new verification routines")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a typo XTS_BLOCKSIZE -> XTS_BLOCK_SIZE, causing the build to
break.

Fixes: ce68acbc ("crypto: s390/xts-aes - invoke fallback for...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Drop the duplicate generic sha256 (and sha224) implementation from
crypto/sha256_generic.c and use the implementation from
lib/crypto/sha256.c instead.

"diff -u lib/crypto/sha256.c sha256_generic.c" shows that the core
sha256_transform function from both implementations is identical and
the other code is functionally identical too.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add sha224 support to the lib/crypto/sha256 library code. This will allow
us to replace both the sha256 and sha224 parts of crypto/sha256_generic.c
when we remove the code duplication in further patches in this series.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:

* Export interesting symbols
* Add  -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
  avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use get/put_unaligned_be32 in lib/crypto/sha256.c to load / store data
so that it can be used with unaligned buffers too, making it more generic.

And use memzero_explicit for better clearing of sensitive data.

Note unlike other patches in this series this commit actually makes
functional changes to the sha256 code as used by the purgatory code.

This fully aligns the lib/crypto/sha256.c sha256 implementation with the
one from crypto/sha256_generic.c allowing us to remove the latter in
further patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Generic crypto implementations belong under lib/crypto not directly in
lib, likewise the header should be in include/crypto, not include/linux.

Note that the code in lib/crypto/sha256.c is not yet available for
generic use after this commit, it is still only used by the s390 and x86
purgatory code. Making it suitable for generic use is done in further
patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a bunch of missing spaces after commas and arround operators.

Note the main goal of this is to make sha256_transform and its helpers
identical in formatting too the duplcate implementation in lib/sha256.c,
so that "diff -u" can be used to compare them to prove that no functional
changes are made when further patches in this series consolidate the 2
implementations into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For some reason after the first 15 steps the last statement of each
step ends with "t1+t2", missing spaces around the "+". This commit
fixes this. This was done with a 's/= t1+t2/= t1 + t2/' to make sure
no functional changes are introduced.

Note the main goal of this is to make lib/sha256.c's sha256_transform
and its helpers identical in formatting too the duplcate implementation
in crypto/sha256_generic.c so that "diff -u" can be used to compare them
to prove that no functional changes are made when further patches in
this series consolidate the 2 implementations into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.

Since the Power8 implementation already has a fallback skcipher standby
for other purposes, let's use it for this purpose as well. If ciphertext
stealing use cases ever become a bottleneck, we can always revisit this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For correctness and compliance with the XTS-AES specification, we are
adding support for ciphertext stealing to XTS implementations, even
though no use cases are known that will be enabled by this.

Since the s390 implementation already has a fallback skcipher standby
for other purposes, let's use it for this purpose as well. If ciphertext
stealing use cases ever become a bottleneck, we can always revisit this.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Align the x86 code with the generic XTS template, which now supports
ciphertext stealing as described by the IEEE XTS-AES spec P1619.
Tested-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a printk format warning by replacing %p with %#llx
for dma_addr_t.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Some legacy code in the CIFS driver uses single DES to calculate
some password hash, and uses the crypto cipher API to do so. Given
that there is no point in invoking an accelerated cipher for doing
56-bit symmetric encryption on a single 8-byte block of input, the
flexibility of the crypto cipher API does not add much value here,
and so we're much better off using a library call into the generic
C implementation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>