To disable the use of the Nested Paging feature even if it is available in
hardware this patch adds a module parameter. Nested Paging can be disabled by
passing npt=0 to the kvm_amd module.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Let SVM detect if the Nested Paging feature is available on the hardware.
Disable it to keep this patch series bisectable.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

By moving the SVM feature detection from the each_cpu code to the hardware
setup code it runs only once. As an additional advance the feature check is now
available earlier in the module setup process.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch makes the EFER register accessible on a 32bit KVM host. This is
necessary to boot 32 bit PAE guests under SVM.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

To allow access to the EFER register in 32bit KVM the EFER specific code has to
be exported to the x86 generic code. This patch does this in a backwards
compatible manner.

[avi: add check for EFER-less hosts]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch aligns the bits the guest can set in the EFER register with the
features in the host processor. Currently it lets EFER.NX disabled if the
processor does not support it and enables EFER.LME and EFER.LMA only for KVM on
64 bit hosts.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This patch give the SVM and VMX implementations the ability to add some bits
the guest can set in its EFER register.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

With CONFIG_PREEMPT=n, this is needed in order to disable the fault-in
code from sleeping.
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This allows kvm_host.h to be #included even when struct preempt_notifier is
undefined. This is needed to build ppc asm-offsets.h.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

To allow TLB entries to be retained across VM entry and VM exit, the VMM
can now identify distinct address spaces through a new virtual-processor ID
(VPID) field of the VMCS.

[avi: drop vpid_sync_all()]
[avi: add "cc" to asm constraints]
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

The second page is only needed on archs that support pio.

Noted by Carsten Otte.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Currently an mmio guest pte is encoded in the shadow pagetable as a
not-present trapping pte, with the SHADOW_IO_MARK bit set.  However
nothing is ever done with this information, so maintaining it is a
useless complication.

This patch moves the check for mmio to before shadow ptes are instantiated,
so the shadow code is never invoked for ptes that reference mmio.  The code
is simpler, and with future work, can be made to handle mmio concurrently.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Opcodes 0x80-0x83
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Avi Kivity <avi@qumranet.com>

This adds group decoding for opcode 0x0f 0x01 (group 7).
Signed-off-by: Avi Kivity <avi@qumranet.com>

Add group decoding support for opcode 0xfe (group 4) and 0xff (group 5).
Signed-off-by: Avi Kivity <avi@qumranet.com>

This adds group decoding support for opcodes 0xf6, 0xf7 (group 3).
Signed-off-by: Avi Kivity <avi@qumranet.com>

This adds group decode support for opcode 0x8f.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Certain x86 instructions use bits 3:5 of the byte following the opcode as an
opcode extension, with the decode sometimes depending on bits 6:7 as well.
Add support for this in the main decoding table rather than an ad-hock
adaptation per opcode.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

A guest partial guest pte write will leave shadow_trap_nonpresent_pte
in spte, which generates a vmexit at the next guest access through that pte.

This patch improves this by reading the full guest pte in advance and thus
being able to update the spte and eliminate the vmexit.

This helps pae guests which use two 32-bit writes to set a single 64-bit pte.

[truncation fix by Eric]
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3:
  x86_64/mm: check and print vmemmap allocation continuous
  x86_64: fix setup_node_bootmem to support big mem excluding with memmap
  x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
  mm: allow reserve_bootmem() cross nodes
  mm: offset align in alloc_bootmem()
  mm: fix alloc_bootmem_core to use fast searching for all nodes
  mm: make mem_map allocation continuous

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: scripts/Makefile.modpost typo fix
  kbuild: soften MODULE_LICENSE check

On big systems with lots of memory, don't print out too much during
bootup, and make it easy to find if it is continuous.

on 256G 8 sockets system will get
 [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0
[ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs
 [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0
[ffffe20038700000-ffffe200387fffff] potential offnode page_structs
 [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1
 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2
 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2
[ffffe20054700000-ffffe200547fffff] potential offnode page_structs
 [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2
[ffffe20070700000-ffffe200707fffff] potential offnode page_structs
 [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3
 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4
 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4
[ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs
 [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4
[ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs
 [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5
 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6
 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6
[ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs
 [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6
 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7

instead of a very long print out...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

typical case: four sockets system, every node has 4g ram, and we are using:

	memmap=10g$4g

to mask out memory on node1 and node2

when numa is enabled, early_node_mem is used to get node_data and node_bootmap.

if it can not get memory from the same node with find_e820_area(), it will
use alloc_bootmem to get buff from previous nodes.

so check it and print out some info about it.

need to move early_res_to_bootmem into every setup_node_bootmem.
and it takes range that node has. otherwise alloc_bootmem could return addr
that reserved early.

depends on "mm: make reserve_bootmem can crossed the nodes".
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

"mm: make reserve_bootmem can crossed the nodes" provides new
reserve_bootmem(), let reserve_bootmem_generic() use that.

reserve_bootmem_generic() is used to reserve initramdisk, so this way
we can make sure even when bootloader or kexec load ranges cross the
node memory boundaries, reserve_bootmem still works.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

split reserve_bootmem_core() into two functions, one which checks
conflicts, and one which sets the bits.

and make reserve_bootmem to loop bdata_list to cross the nodes.

user could be crashkernel and ramdisk..., in case the range provided
by those externalities crosses the nodes.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

need offset alignment when node_boot_start's alignment is less than
the alignment required.

use local node_boot_start to match alignment - so don't add extra operation
in search loop.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Make the nodes other than node 0 use bdata->last_success for fast
search too.

We need to use __alloc_bootmem_core() for vmemmap allocation for other
nodes when numa and sparsemem/vmemmap are enabled.

Also, make fail_block path increase i with incr only after ALIGN
to avoid extra increase when size is larger than align.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

vmemmap allocation currently has this layout:

 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001800000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001c00000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810002000000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002400000 on node 0
...

note that there is a 2M hole between them - not optimal.

the root cause is that usemap (24 bytes) will be allocated after every 2M
mem_map, and it will push next vmemmap (2M) to the next (2M) alignment.

solution: try to allocate the mem_map continously.

after the patch, we get:

 [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001400000 on node 0
 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001800000 on node 0
 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001a00000 on node 0
 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810001c00000 on node 0
...

which is the ideal layout.

and usemap will share a page because of they are allocated continuously too:

sparse_early_usemap_alloc: usemap = ffff810024e00000 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00080 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00100 size = 24
sparse_early_usemap_alloc: usemap = ffff810024e00180 size = 24
...

so we make the bootmem allocation more compact and use less memory
for usemap => mission accomplished ;-)
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-generic-bitops-v3:
  x86, bitops: select the generic bitmap search functions
  x86: include/asm-x86/pgalloc.h/bitops.h: checkpatch cleanups - formatting only
  x86: finalize bitops unification
  x86, UML: remove x86-specific implementations of find_first_bit
  x86: optimize find_first_bit for small bitmaps
  x86: switch 64-bit to generic find_first_bit
  x86: generic versions of find_first_(zero_)bit, convert i386
  bitops: use __fls for fls64 on 64-bit archs
  generic: implement __fls on all 64-bit archs
  generic: introduce a generic __fls implementation
  x86: merge the simple bitops and move them to bitops.h
  x86, generic: optimize find_next_(zero_)bit for small constant-size bitmaps
  x86, uml: fix uml with generic find_next_bit for x86
  x86: change x86 to use generic find_next_bit
  uml: Kconfig cleanup
  uml: fix build error

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits)
  ide: constify struct ide_dma_ops
  ide: add struct ide_dma_ops (take 3)
  ide: add IDE_HFLAG_SERIALIZE_DMA host flag
  sl82c105: check bridge revision in sl82c105_init_one()
  au1xxx-ide: use ->init_dma method
  palm_bk3710: use ->init_dma method
  sgiioc4: use ->init_dma method
  icside: use ->init_dma method
  ide-pmac: use ->init_dma method
  ide: do complete DMA setup in ->init_dma method (take 2)
  au1xxx-ide: fix MWDMA support
  ide: cleanup ide_setup_dma()
  ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
  ide: export ide_allocate_dma_engine()
  ide: move ide_setup_dma() call out from ->init_dma method
  alim15x3: skip DMA initialization completely on revs < 0x20
  pdc202xx_old: remove init_dma_pdc202xx()
  ide: don't display "BIOS" settings in ide_setup_dma()
  ide: remove ->cds field from ide_hwif_t (take 2)
  ide: remove ide_dma_iobase()
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootparam:
  x86, boot: Document for linked list of struct setup_data
  x86, boot: export linked list of struct setup_data via debugfs
  x86, boot: add linked list of struct setup_data
  x86, boot: add free_early to early reservation machanism

* Export ide_dma_exec_cmd() and __ide_dma_test_irq().

* Constify struct ide_dma_ops.

* Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
  (it is later overriden by ide_init_port() if needed) and drop
  'const struct ide_port_info *d' argument.

While at it:

* Rename __ide_dma_test_irq() to ide_dma_test_irq().
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports
  if DMA is available and handle it in ide_init_port().

* Convert sl82c105 host driver to use this new flag.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make sl82c105_bridge_revision() return 'u8' instead of 'unsigned long'.

* Check bridge revision in sl82c105_init_one().

While at:

* Use proper KERN_ level for printk().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Pass 'ide_hwif_t *hwif' instead of '_auide_hwif *auide' to
  auide_ddma_init().

* Add 'const struct ide_port_info *d' argument to auide_ddma_init().

* Convert the driver to use ->init_dma method.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move DMA setup to palm_bk3710_init_dma().

* Convert the driver to use ->init_dma method.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>