- 01 Aug, 2021 2 commits
-
-
Gregory Williams authored
Removed space before comma, fixed if statements by putting trailing statements on new line, fixed unsigned int declaration, and removed not needed else statement after return. Signed-off-by:
Gregory Williams <gregwills85@gmail.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210731005328.GA19016@devbox
-
Alistair Francis authored
Add support for the 10.3" E Ink panel described at: https://www.eink.com/product.html?type=productdetail&id=7Signed-off-by:
Alistair Francis <alistair@alistair23.me> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
- 31 Jul, 2021 7 commits
-
-
Cai Huoqing authored
Remove including <linux/version.h> that don't need it. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Douglas Anderson authored
The Samsung ATNA33XC20 panel is an AMOLED eDP panel that has backlight control over the DP AUX channel. This panel is _almost_ able to be controlled in a "simple" way (and it originally was implemented in panel-simple.c), but it's really impossible to get the backlight semantics right there without adding wacky special-case code to panel-simple. Let's give up and clone the parts of panel-simple that we need and implement the power sequence that this panel needs. NOTE: we'll still leave the devicetree bindings alone. Even though the power-sequencing is non-standard the bindings are still "simple". Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit 18a1488b. Those delays were added to support the Samsung ATNA33XC20 panel. However, we've moving that to its own panel driver and out of panel-simple. That means we don't need the ability to specify this delay. NOTE: it's unlikely we want to keep this delay "just in case" some other panel needs it. The enable-gpio and the power supply are really supposed to be different ways to specify the same thing: the main enable of the panel. Supporting a delay between them doesn't really make sense. Signed-off-by:
-
Douglas Anderson authored
This reverts commit 4bfe6c8f. This panel's power sequencing really can't be handled properly by panel-simple because of the special sequencing needed for the EL_ON3 GPIO. The only way it was sorta working in the past was by trying to jam that signal into the "enable-gpio", but that really wasn't a good fit. We'll add a custom panel driver for this panel to do it right. Signed-off-by:
-
Douglas Anderson authored
The manual has always said that we need 100 us delays in a few places. Though it hasn't seemed to be a big deal to skip these, let's add them in case it makes something happier. NOTE: this fixes no known issues but it seems good to make it right. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
-
Douglas Anderson authored
When testing with a panel that's apparently a little more persnickety about the correct power sequence (specifically Samsung ATNA33XC20), we found that the ti-sn65dsi86 was doing things just slightly wrong. Looking closely at the ti-sn65dsi86's datasheet, the power off sequence is supposed to be: 1. Clear VSTREAM_ENABLE bit 2. Stop DSI stream from GPU. DSI lanes must be placed in LP11 state. 3. Program the ML_TX_MODE to 0x0 (OFF) 4. Program the DP_NUM_LANES register to 0x0 5. Clear the DP_PLL_EN bit. 6. Deassert the EN pin. 7. Remove power from supply pins Since we were doing the whole sequence in the "disable", I believe that step #2 (stopping the DSI stream from the GPU) wasn't happening. We also weren't setting DP_NUM_LANES to 0. Let's fix this. NOTE: things are a little asymmetric now. For instance, we turn the PLL on in "enable" but now we're not turning it off until "post_disable". It would seem to make sense to move the PLL turning on to "pre_enable" to match. Unfortunately, I don't believe that's allowed. It looks as if (in the non-refclk mode which probably nobody is using) we have to wait until the MIPI clock is there before we can enable the PLL. In any case, the way it is here won't really hurt--it'll just leave the PLL on a little longer. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by:
-
Douglas Anderson authored
The function drm_edp_backlight_init() is defined such that the "driver_pwm_freq_hz" parameter is optional--it's 0 if you don't want to futz with it. If you follow this variable through, you'll find out that if it's 0 we won't ever set the "bl->pwmgen_bit_count", leaving it as 0. That means that before using it in drm_edp_backlight_enable() we need to check to see if it's non-zero. Programming this field to zero was confusing the panel I tested with (Samsung ATNA33XC20). The backlight still worked somewhat but the brightness values didn't correspond to what they should have been. Fixes: 867cf9cd ("drm/dp: Extract i915's eDP backlight code into DRM helpers") Signed-off-by:
-
- 30 Jul, 2021 5 commits
-
-
Desmond Cheong Zhi Xi authored
The kerneldoc in drm_lease.c is unused because none of the functions are driver interfaces as the symbols are not exported. Since they aren't used and much of the existing comments don't provide any insights (e.g. they just repeat the function name or list out the function parameters), they should be removed to make them easier to maintain and to make useful info more obvious. As a note, many of the comments mention whether idr_mutex should be held, but these are mostly redundant in cases where the function contains lockdep assertions or grabs the mutex. To simplify review, here's the reasoning behind each update. drm_lease_owner: function name is self-descriptive _drm_find_lessee: function name is self-descriptive _drm_lease_held_master: function name and signature are self-descriptive _drm_has_leased: kerneldoc is summarized into a comment because the function name could be interpreted ambiguously (check if the object has been leased VS check if the master has a lease on the object) _drm_lease_held: Retain the idr_mutex comment because the function does not directly grab the mutex or use a lockdep assertion. Otherwise, the function name is self-descriptive. drm_lease_held: function name is self-descriptive drm_lease_filter_crtcs: Kerneldoc is summarized into a comment because the function name could be interpreted ambiguously (filter leases based on crtcs mask VS filter crtcs mask based on leases) drm_lease_create: Kerneldoc removed. Useful function details such as atomic leasing are retained. Errno interpretations are useful and retained. drm_lease_destroy: function name is self-descriptive. Additional information is also removed as they're already present as comments inside the function. _drm_lease_revoke: function name is self-descriptive drm_lease_revoke: function name is self-descriptive drm_mode_create_lease_ioctl: Kerneldoc removed, but useful function details retained. drm_mode_list_lessees_ioctl: function name is self-descriptive. Additional details restate what the code does. drm_mode_get_lease_ioctl: Function summary retained to clarify that it's the leased objects that are returned, not the lease structure. drm_mode_revoke_lease_ioctl: Kerneldoc removed, but useful function details retained. Signed-off-by:
Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210730051759.1570630-1-desmondcheongzx@gmail.com
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
An early pull for v5.15 (there'll be more coming in a week or two), consisting of the drm/scheduler conversion and a couple other small series that one was based one. Mostly sending this now because IIUC danvet wanted it in drm-next so he could rebase on it. (Daniel, if you disagree then speak up, and I'll instead include this in the main pull request once that is ready.) This also has a core patch to drop drm_gem_object_put_locked() now that the last use of it is removed. [airlied: add NULL to drm_sched_init] Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car DU shutdown fixes - R-Car DU conversion to bridge connector helper - Misc small fixes Signed-off-by:
-
- 29 Jul, 2021 12 commits
-
-
Maxime Ripard authored
Commit 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") removed the references to the vc4_hdmi_audio_component_drv structure, but not the structure itself resulting in a warning. Remove it. Fixes: 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
-
Maxime Ripard authored
The vc4_hdmi_audio_prepare function and the functions it's calling have in several occurences multiple dereferences of either the sample rate or the number of channels. It turns out that these variables are also passed through the hdmi codec parameters structure. Convert all the users to use this structure, and if it's used multiple times use a variable to store it instead of dereferencing it every time. Reviewed-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by:
-
Desmond Cheong Zhi Xi authored
We make the following changes to the documentation of drm leases to make it easier to reason about their usage. In particular, we clarify the lifetime and locking rules of lease fields in drm_master: 1. Make it clear that &drm_device.mode_config.idr_mutex protects the lease idr and list structures for drm_master. The lessor field itself doesn't need to be protected as it doesn't change after it's set in drm_lease_create. 2. Add descriptions for the lifetime of lessors and leases. 3. Add an overview DOC: section in drm-uapi.rst that defines the terminology for drm leasing, and explains how leases work and why they're used. Signed-off-by:
-
Luben Tuikov authored
Fix a bug in smu_cmn_send_msg_without_waiting() in that this function does not need to take the smu->message_lock mutex in order to send a message down to the SMU. The mutex is acquired by the caller of this function instead. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Changfeng Zhu <Changfeng.Zhu@amd.com> Cc: Huang Rui <ray.huang@amd.com> Fixes: 5810323b ("drm/amd/pm: Fix a bug communicating with the SMU (v5)") Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
Huang Rui authored
The function is ready on psp firmware, and enable it by default. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Likun Gao authored
Fence driver was enabled per ring when sw init on per IP block before. Change to enable all the fence driver at the same time after amdgpu_device_ip_init finished. Rename some function related to fence to make it reasonable for read. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
John Clements authored
Added BL loading support for soc/intf/dbg drivers Signed-off-by:
John Clements <john.clements@amd.com> Reviewed-by:
-
John Clements authored
Remove duplicate code Signed-off-by:
-
John Clements authored
Detect psp driver binaries packed into FW and try to load the FW Signed-off-by:
-
John Clements authored
Improved handling for scalling PSP FW binaries Signed-off-by:
-
Huang Rui authored
It won't need to clear the xxx_PSP_DEBUG registers, because firmware will handle this change. Signed-off-by:
-
Alex Deucher authored
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
- 28 Jul, 2021 14 commits
-
-
Linus Walleij authored
This converts the internal backlight in the Sony ACX424AKP driver to do it the canonical way: - Assign the panel->backlight during probe. - Let the panel framework handle the backlight. - Make the backlight .set_brightness() turn the backlight off completely if blank. - Fix some dev_err_probe() use cases along the way. Tested on the U8500 HREF520 reference design. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
Desmond Cheong Zhi Xi authored
Inside drm_is_current_master, using the outer drm_device.master_mutex to protect reads of drm_file.master makes the function prone to creating lock hierarchy inversions. Instead, we can use the drm_file.master_lookup_lock that sits at the bottom of the lock hierarchy. Reported-by:
-
Simon Ser authored
Add links to the issue tracker and the IRC channel for the amdgpu driver. Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Pan Xinhui <Xinhui.Pan@amd.com> Signed-off-by:
-
Alex Deucher authored
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Camille Cho <Camille.Cho@amd.com> Signed-off-by:
-
Evan Quan authored
Properly restore those committed and non-committed user customized OD settings. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Evan Quan authored
The customized OD settings can be divided into two parts: those committed ones and non-committed ones. - For those changes which had been fed to SMU before S3/S4/Runpm suspend kicked, they are committed changes. They should be properly restored and fed to SMU on S3/S4/Runpm resume. - For those non-committed changes, they are restored only without feeding to SMU. Signed-off-by: -
Eric Huang authored
This reverts commit 4bba567c. Revert reason: The issue has been resolved. Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Signed-off-by:
-
Eric Huang authored
This reverts commit 4e7b93ca. Revert reason: The issue has been resolved. Signed-off-by:
-
Eric Huang authored
This reverts commit 7ed9876c. Revert reason: The issue has been resolved. Signed-off-by:
-
Eric Huang authored
This reverts commit 024d8811. Revert reason: The issue has been resolved. Signed-off-by:
-
Eric Huang authored
This reverts commit 430f8e6e. Revert reason: Issue has been resolved. Signed-off-by:
-
Aric Cyr authored
This version brings along following fixed: - Guard DST_Y_PREFETCH register overflow in DCN21 - Add missing DCN21 IP parameter - Fix PSR command version - Add ETW logging for AUX failures - Add ETW log to dmub_psr_get_state - Fixed EdidUtility build errors - Fix missing reg offset for the dmcub test debug registers - Adding update authentication interface - Remove unused functions of opm state query support - Always wait for update lock status - Refactor riommu invalidation wa - Ensure dentist display clock update finished in DCN20 Reviewed-by:
Hsieh Mike <Mike.Hsieh@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Anthony Koo authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Dale Zhao authored
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by:
Dale Zhao <dale.zhao@amd.com> Tested-by:
-
