In the case where st->ch_map[GRTS_CH_PRESSURE] < GRTS_MAX_CHANNELS is false
and also st->ch_map[GRTS_CH_Z1] < GRTS_MAX_CHANNELS is false the variable
press is not initialized and contains garbage. In this situation
st->pressure is also false, so we do not actually use press value, but
it is impossible for the compiler to realize this, and it emits
"uninitialized variable" warning. Fix this by initializing press
to 0 and allows us to also remove an else clause that sets press to 0.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 60b7db91 ("Input: resistive-adc-touch - rework mapping of channels")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210603220809.155118-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral
is split into two peripherals: PON_HLOS and PON_PBS.  The
application processor only has write access to PON_HLOS which
limits it to only receiving PON interrupts.

Add support for the PMK8350 PON_HLOS peripheral so that its
KPDPWR_N and RESIN_N interrupts can be used to detect key
presses.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1620630064-16354-2-git-send-email-skakit@codeaurora.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add power key and resin compatible strings for the PMK8350 PMIC.
These are needed to distinguish key PON_HLOS register differences
between PMK8350 and previous PMIC PON modules.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620630064-16354-3-git-send-email-skakit@codeaurora.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.

The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.

Implement (optional) support for also enabling an "iovcc-supply".
The datasheet specifies a delay of ~ 10us before enabling VDD/VCC
after IOVCC is enabled, so make sure to enable IOVCC first.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.

The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.

Document (optional) support for controlling the regulator for IOVCC
using "iovcc-supply".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-1-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is nothing in include/linux/input/cyttsp.h that might be of interes
to the kernel at large, so let's move this information into the driver
code and remove the header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Ferruh's email has been bouncing for quite some time ans Linus has agreed
to look over the driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210531052307.1433979-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of iterating over channels establish and use channel map to
retrieve data. As a side effect this will silence "uninitialized variable"
warnings.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/YLXR2brkc4H54xtK@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is actually OF independent and doesn't need anything from OF (*).
Replace OF headers with mod_devicetable.h and property.h.

*) use of of_match_ptr() is actually wrong here, since it may provoke
   a compiler to warn about unused variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528151113.85943-2-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Validation script is not happy:

 resistive-adc-touch.c:53: warning: Function parameter or member 'x_plate_ohms' not described in 'grts_state'
 resistive-adc-touch.c:53: warning: Function parameter or member 'ch' not described in 'grts_state'

Describe parameters in kernel doc to make it happy.

Fixes: fb082cd5 ("Input: resistive-adc-touch - add support for z1 and z2 channels")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528151113.85943-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of forcing interrupt trigger to be "falling edge" let's rely on the
platform to set it up according to how it is set up on a given board based
on data in device tree or ACPI tables.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/YK7iO96g+7yIC0l1@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The CYTTSP TMA340 chips have two supplies: VCPIN and
VDD for analog and digital voltage respectively.
Add some minimal code to obtain and enable these
regulators if need be.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-3-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver (both SPI and I2C interface) should probe from the compatible
strings, cypress,cy8ctma340 etc when using device tree, not as now, where
it is probing implicitly from the I2C/SPI node name "cypress,cyttsp-i2c"
etc.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-2-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This converts the CYTTSP "Cypress TrueTouch Standard Product"
to YAML bindings and fixes and adds some things in the process:

- Rename the bindings file to cypress,cy8ctma340 after the main
  product in the series.
- Add proper compatibles for the two known products:
  CY8CTMA340 and CY8CTST341.
- Deprecate "cypress,cyttsp-spi" and "cypress,cyttsp-i2c"
  because device compatibles should be named after the
  hardware and not after which bus they are connected to.
  The topology implicitly tells us which bus it is and what
  interface to used.
- Add VCPIN and VDD supplies, these are present just like
  on the CY8CTMA140.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-1-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds support for the z1 and z2 channels. These are used to
calculate the applied pressure. As there is no common order of the
individual channels of a resistive touch ADC, support for
io-channel-names is added (although the DT bindings stated the driver
already supports these).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210525054634.9134-5-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

For pressure calculation based on plates resistance we need some additional
properties:
- z1 and z2 channels with additional measurements between plates
- actual resistance of the touchscreen. Currently we use only
  X-resistance.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-4-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

To calculate the pressure on a restrictive touchscreen we need to know
resistance at least of X plate. Some calculations need to use both X and
Y values. So let's add generic properties which can be used by all
drivers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-3-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the resistive-adc-touch binding to DT schema format using json-schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210525054634.9134-2-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with mainline to get the latest device tree bindings and kernel
APIs.

Unnecessary spaces have been replaced with tab space. This is done to
maintain code uniformity.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Link: https://lore.kernel.org/r/20210428091050.ryr7kxlxre7uhye4@kewl-virtual-machineSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is a left-over from commit 1a59d1b8 ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 156")

Axe an empty and useless comment block.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fda981546203427a0ac86ef47f231239ad18ecfe.1618520227.git.christophe.jaillet@wanadoo.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

trivial-devices.yaml already provide bindings for fsl-mma8450.
Since input/fsl-mma8450.txt provides no extra value, lets remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210521192210.12839-1-clabbe@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Return error code -EINVAL rather than '0' when the combo devices are not
supported.

Fixes: fa71c605 ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix potential NULL pointer dereference in the auxtrace option parser

 - Fix access to PID in an array when setting a PID filter in 'perf ftrace'

 - Fix error return code in the 'perf data' tool and in maps__clone(),
   found using a static analysis tool from Huawei

* tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf map: Fix error return code in maps__clone()
  perf ftrace: Fix access to pid in array when setting a pid filter
  perf auxtrace: Fix potential NULL pointer dereference
  perf data: Fix error return code in perf_data__create_dir()

Pull x86 perf fixes from Borislav Petkov:

 - Fix Broadwell Xeon's stepping in the PEBS isolation table of CPUs

 - Fix a panic when initializing perf uncore machinery on Haswell and
   Broadwell servers

* tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
  perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3

Pull locking fix from Borislav Petkov:
 "Fix ordering in the queued writer lock's slowpath"

* tag 'locking_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/qrwlock: Fix ordering in queued_write_lock_slowpath()

Pull scheduler fix from Borislav Petkov:
 "Fix a typo in a macro ifdeffery"

* tag 'sched_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt/dynamic: Fix typo in macro conditional statement

Pull x86 fix from Borislav Petkov:
 "Fix an out-of-bounds memory access when setting up a crash kernel with
  kexec"

* tag 'x86_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access

Pull kvm fix from Paolo Bonzini:
 "Fix SRCU bug introduced in the merge window"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/xen: Take srcu lock when accessing kvm_memslots()

This reverts commit 0c85a7e8.

The games with 'rm' are on (two separate instances) of a local variable,
and make no difference.

Quoting Aditya Pakki:
 "I was the author of the patch and it was the cause of the giant UMN
  revert.

  The patch is garbage and I was unaware of the steps involved in
  retracting it. I *believed* the maintainers would pull it, given it
  was already under Greg's list. The patch does not introduce any bugs
  but is pointless and is stupid. I accept my incompetence and for not
  requesting a revert earlier."

Link: https://lwn.net/Articles/854319/Requested-by: Aditya Pakki <pakki001@umn.edu>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull pin control fixes from Linus Walleij:
 "Late pin control fixes, would have been in the main pull request
  normally but hey I got lucky and we got another week to polish up
  v5.12 so here we go.

  One driver fix and one making the core debugfs work:

   - Fix the number of pins in the community of the Intel Lewisburg SoC

   - Show pin numbers for controllers with base = 0 in the new debugfs
     feature"

* tag 'pinctrl-v5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: core: Show pin numbers for the controllers with base = 0
  pinctrl: lewisburg: Update number of pins in community

Merge misc fixes from Andrew Morton:
 "5 patches.

  Subsystems affected by this patch series: coda, overlayfs, and
  mm (pagecache and memcg)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/cgroup/slabinfo.py: updated to work on current kernel
  mm/filemap: fix mapping_seek_hole_data on THP & 32-bit
  mm/filemap: fix find_lock_entries hang on 32-bit THP
  ovl: fix reference counting in ovl_mmap error path
  coda: fix reference counting in coda_file_mmap error path

Pull block fix from Jens Axboe:
 "A single fix for a behavioral regression in this series, when
  re-reading the partition table with partitions open"

* tag 'block-5.12-2021-04-23' of git://git.kernel.dk/linux-block:
  block: return -EBUSY when there are open partitions in blkdev_reread_part

slabinfo.py script does not work with actual kernel version.

First, it was unable to recognise SLUB susbsytem, and when I specified
it manually it failed again with

  AttributeError: 'struct page' has no member 'obj_cgroups'

.. and then again with

  File "tools/cgroup/memcg_slabinfo.py", line 221, in main
    memcg.kmem_caches.address_of_(),
  AttributeError: 'struct mem_cgroup' has no member 'kmem_caches'

Link: https://lkml.kernel.org/r/cec1a75e-43b4-3d64-2084-d9f98fda037f@virtuozzo.comSigned-off-by: Vasily Averin <vvs@virtuozzo.com>
Tested-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No problem on 64-bit, or without huge pages, but xfstests generic/285
and other SEEK_HOLE/SEEK_DATA tests have regressed on huge tmpfs, and on
32-bit architectures, with the new mapping_seek_hole_data().  Several
different bugs turned out to need fixing.

u64 cast to stop losing bits when converting unsigned long to loff_t
(and let's use shifts throughout, rather than mixed with * and /).

Use round_up() when advancing pos, to stop assuming that pos was already
THP-aligned when advancing it by THP-size.  (This use of round_up()
assumes that any THP has THP-aligned index: true at present and true
going forward, but could be recoded to avoid the assumption.)

Use xas_set() when iterating away from a THP, so that xa_index stays in
synch with start, instead of drifting away to return bogus offset.

Check start against end to avoid wrapping 32-bit xa_index to 0 (and to
handle these additional cases, seek_data or not, it's easier to break
the loop than goto: so rearrange exit from the function).

[hughd@google.com: remove unneeded u64 casts, per Matthew]
  Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2104221347240.1170@eggly.anvils

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2104211737410.3299@eggly.anvils
Fixes: 41139aa4 ("mm/filemap: add mapping_seek_hole_data")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

No problem on 64-bit, or without huge pages, but xfstests generic/308
hung uninterruptibly on 32-bit huge tmpfs.

Since commit 0cc3b0ec ("Clarify (and fix) in 4.13 MAX_LFS_FILESIZE
macros"), MAX_LFS_FILESIZE is only a PAGE_SIZE away from wrapping 32-bit
xa_index to 0, so the new find_lock_entries() has to be extra careful
when handling a THP.

Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2104211735430.3299@eggly.anvils
Fixes: 5c211ba2 ("mm: add and use find_lock_entries")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap_region() now calls fput() on the vma->vm_file.

Fix this by using vma_set_file() so it doesn't need to be handled
manually here any more.

Link: https://lkml.kernel.org/r/20210421132012.82354-2-christian.koenig@amd.com
Fixes: 1527f926 ("mm: mmap: fix fput in error path v2")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <stable@vger.kernel.org>	[5.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap_region() now calls fput() on the vma->vm_file.

So we need to drop the extra reference on the coda file instead of the
host file.

Link: https://lkml.kernel.org/r/20210421132012.82354-1-christian.koenig@amd.com
Fixes: 1527f926 ("mm: mmap: fix fput in error path v2")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <stable@vger.kernel.org>	[5.11+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kvm_memslots() will be called by kvm_write_guest_offset_cached() so we should
take the srcu lock. Let's pull the srcu lock operation from kvm_steal_time_set_preempted()
again to fix xen part.

Fixes: 30b5c851 ("KVM: x86/xen: Add support for vCPU runstate information")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1619166200-9215-1-git-send-email-wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>