- 27 Jul, 2009 28 commits
-
-
Julia Lawall authored
str has already been tested. It seems that this test should be on the recently returned value snr. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( *x == NULL | *x != NULL ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Neil Horman authored
Export garbage collector thresholds for xfrm[4|6]_dst_ops Had a problem reported to me recently in which a high volume of ipsec connections on a system began reporting ENOBUFS for new connections eventually. It seemed that after about 2000 connections we started being unable to create more. A quick look revealed that the xfrm code used a dst_ops structure that limited the gc_thresh value to 1024, and always dropped route cache entries after 2x the gc_thresh. It seems the most direct solution is to export the gc_thresh values in the xfrm[4|6] dst_ops as sysctls, like the main routing table does, so that higher volumes of connections can be supported. This patch has been tested and allows the reporter to increase their ipsec connection volume successfully. Reported-by:
Joe Nall <joe@nall.com> Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> ipv4/xfrm4_policy.c | 18 ++++++++++++++++++ ipv6/xfrm6_policy.c | 18 ++++++++++++++++++ 2 files changed, 36 insertions(+) Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Julia Lawall authored
entry was tested for NULL near the beginning of the function, followed by a return, and there is no intervening modification of its value. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( *x == NULL | *x != NULL ) // </smpl> Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
-
Julia Lawall authored
res has already been tested. It seems that this test should be on the recently returned value mmio. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( *x == NULL | *x != NULL ) // </smpl> Signed-off-by:
-
-
Dhananjay Phadke authored
Signed-off-by:
Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by:
-
Amit Kumar Salecha authored
Add support for ethtool -G to tune rx and tx ring sizes per interface basis. This is only supported for NX3031 based cards. Signed-off-by:
Amit Kumar Salecha <amit@netxen.com> Signed-off-by:
-
Dhananjay Phadke authored
Enable vlan tx acceleration for NX3031 if firmware advertises capability. Signed-off-by:
-
Dhananjay Phadke authored
Request 1532 bytes skb data size for NX3031. NX2031 firmware needs 1760 sized buffers. Signed-off-by:
-
Dhananjay Phadke authored
Move all net_device initialization into one function netxen_setup_netdev(). Signed-off-by:
-
Dhananjay Phadke authored
NX2031 firmware version will never be > 4.0.0, so replace (adapter->fw_major < 4) checks with pci revision ID check. Signed-off-by:
-
Dhananjay Phadke authored
Signed-off-by:
-
Dhananjay Phadke authored
o move all tso / checksum offload code into netxen_tso_check(). o optimize the tso header copy into simple loop. o clean up unnecessary unions from cmd_desc_type0 struct. Signed-off-by:
-
Dhananjay Phadke authored
o remove superfluous code to setup PCI dma watchdog for NX2031. o disable dma watchdog completely for NX3031 (not required). Signed-off-by:
-
Dhananjay Phadke authored
Initialize and configure interrupt coalesing defaults in the firmware, so that these also reflect in "ethool -c". Signed-off-by:
-
Dhananjay Phadke authored
NX3031 hardware requires local IP addresses for packet accumulation (LRO). IP address hashing is required to distinguish a local TCP flow from others (forwarded or guest). This patch adds listener for IP and netdev events and configures IP address in the firmware. Signed-off-by:
-
Dhananjay Phadke authored
o move dma mask update to netxen_start_firmware() so that if firmware changes across suspend (e.g. file -> flash) it reflects right dma mask. o re-read firmware capabilities after firmware reset. Signed-off-by:
-
Karsten Keil authored
Based on comments from Joe Perches <joe@perches.com>. Thanks. Fix IOFUNC_MEMIO macro. WriteFiFo##name##_MIO use the wrong struct name, this was missed because the macro was only called with this name. Clarify with _func that the defined types are functions. Add names to the parameters for better understanding the purpose. Signed-off-by:
Karsten Keil <keil@b1-systems.de> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
-
Eric Dumazet authored
net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Signed-off-by:Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
Eric Dumazet authored
[PATCH net-next-2.6] bnx2: Update vlan_features In order to get full use of some advanced features of BNX2, we now need to fill dev->vlan_features. Patch successfully tested with vlan devices built on top of bonding. (bond0 : one bnx2 slave, one tg3 slave (not yet vlan_features enabled) Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Tomas Winkler authored
1. add intel's sdio vendor id to sdio_ids.h 2. move iwmc3200 sdio devices' ids to sdio_ids.h Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Sridhar Samudrala authored
This helps avoid error messages with ethtool -k on devices that don't provide device specific routines. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> ------------------------------------------------------------------ Signed-off-by:
-
Eric Dumazet authored
Patrick said : "vlan_features doesn't need to be updated, the resulting dev->features of the VLAN device is computed as the intersection of dev->features and dev->vlan_features." Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Johannes Berg authored
We've had %pM for long enough now, time to deprecate print_mac() and remove the __maybe_unused attribute from DECLARE_MAC_BUF so that variables declared with that can be found and removed. Otherwise people are putting in new users of print_mac(). Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Acked-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
- 26 Jul, 2009 12 commits
-
-
David S. Miller authored
As reported by Oliver Hartkopp: net/phonet/pn_dev.c: In function ‘phonet_init_net’: net/phonet/pn_dev.c:221: error: implicit declaration of function ‘proc_net_fops_create’ net/phonet/pn_dev.c: In function ‘phonet_exit_net’: net/phonet/pn_dev.c:242: error: implicit declaration of function ‘proc_net_remove’ Signed-off-by: -
-
-
Alexander Duyck authored
This change resolves some warnings seen with DMA debugging enabled in which we were mapping skb->data with size + NET_IP_ALIGN and unmapping it with just size. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Alexander Duyck authored
The igb driver is currently initializing the mailbox function pointers after the phy. This causes issues as the phy init will return from the function early if there is no phy present. To resolve this I have moved the function pointer init to a location prior to the phy initialization so that serdes based adapters can also make use of SR-IOV. Signed-off-by:
-
Alexander Duyck authored
This patch cleans up the flow control configuration for igb to make it a bit more readable in regards to what the requested and current modes are. This should help with the maintainability of the current igb driver in regards to flow control. Signed-off-by:
-
Alexander Duyck authored
This change makes it so that we use buffer_info->dma instead of shinfo->nr_frags to determine if we need to unmap a received skb. By doing this we can avoid a cache miss on small packets since the buffer_info structure should already be prefetched. Signed-off-by:
-
Alexander Duyck authored
This patch adds support for a new 82576 mezzanine adapter. Signed-off-by:
-
Alexander Duyck authored
There is a switch statement in igb_set_wol that defaults to break and doesn't actually do anything. As such it should be removed. Signed-off-by:
-
Alexander Duyck authored
This update cleans up the receive address register initialization. The main purpose of this is to clean out some redundancy that was introduced due to having multiple ways of setting the receive address registers. Instead of having a specialized function to set one register and one to set all of them it makes more sense to just go through the list calling the function that is needed to set the individual registers. Signed-off-by:
-
Alexander Duyck authored
This patch moves all of the multicast addresses out of the free Receive address registers and instead programs them all into the multicast table array. As a result the multicast filtering may not be as precise, but it also greatly reduces the overhead for multicast addresses. Signed-off-by:
-
Alexander Duyck authored
The 82575 and 82576 hardware can both experience data corruption issues if a pci-e completion arrives after the timeout value. In order to avoid this we need to increase the timeout value while pci-e master is disabled. Signed-off-by:
-
