- 10 Dec, 2020 1 commit
-
-
Douglas Anderson authored
I would repeat the same commit message that was in commit 5e4b7e82 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 08 Dec, 2020 6 commits
-
-
Manivannan Sadhasivam authored
Add GDSC support to control the power supply of power domains in SDX55 GCC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-7-manivannan.sadhasivam@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Manivannan Sadhasivam authored
Add GDSC instances in SDX55 GCC block. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-6-manivannan.sadhasivam@linaro.orgAcked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Manivannan Sadhasivam authored
Add support for following clocks maintained by RPMh in SDX55 SoCs. * BI TCXO * RF_CLK1 * RF_CLK1_AO * RF_CLK2 * RF_CLK2_AO * QPIC (Qualcomm Technologies, Inc. Parallel Interface Controller) Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201126072844.35370-5-manivannan.sadhasivam@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Vinod Koul authored
Add compatible for SDX55 RPMHCC and DT include. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-4-manivannan.sadhasivam@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Naveen Yadav authored
Add Global Clock Controller (GCC) support for SDX55 SoCs from Qualcomm. Signed-off-by: Naveen Yadav <naveenky@codeaurora.org> [mani: converted to parent_data, commented critical clocks, cleanups] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-3-manivannan.sadhasivam@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Vinod Koul authored
Add device tree bindings for global clock controller on SDX55 SoCs. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201126072844.35370-2-manivannan.sadhasivam@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 27 Nov, 2020 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201126232400.15011-1-colin.king@canonical.comSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 25 Nov, 2020 2 commits
-
-
Thara Gopinath authored
Qualcomm CE clock resource that is managed by BCM is required by crypto driver to access the core clock. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201119155233.3974286-3-thara.gopinath@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Thara Gopinath authored
Add clock id forc CE clock resource which is required to bring up the crypto engine on sdm845. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20201119155233.3974286-2-thara.gopinath@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 14 Nov, 2020 3 commits
-
-
Dmitry Baryshkov authored
On SM8250 MMCX power domain is required to access MMDS_GDSC registers. This power domain is expressed as mmcx-supply regulator property. Use this regulator as MDSS_GDSC supply. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201023131925.334864-6-dmitry.baryshkov@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Stephen Boyd authored
Let's call pm_runtime_get() here instead of calling the PM clk APIs directly. This avoids a compilation problem on CONFIG_PM=n where the pm_clk_runtime_{resume,suspend}() functions don't exist and covers the intent, i.e. enable the clks for this device so we can program PLL settings. Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Taniya Das <tdas@codeaurora.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: 15d09e83 ("clk: qcom: camcc: Add camera clock controller driver for SC7180") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201114174408.579047-1-sboyd@kernel.org
-
Dan Carpenter authored
Clean up the first driver if the second driver can't be registered. Fixes: 4ee9fe3e ("clk: qcom: lpass-sc7180: Disentangle the two clock devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201113101419.GC168908@mwandaReviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 05 Nov, 2020 10 commits
-
-
Srinivas Kandagatla authored
LPASS Always ON Clock controller has one GFM mux to control VA and TX clocks to codec macro on LPASS. This patch adds support to this mux. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-5-srinivas.kandagatla@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Srinivas Kandagatla authored
GFM Muxes in AUDIO_CC control clocks to LPASS WSA and RX Codec Macros. This patch adds support to these muxes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-4-srinivas.kandagatla@linaro.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Srinivas Kandagatla authored
Always ON Clock controller is a block inside LPASS which controls 1 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-3-srinivas.kandagatla@linaro.orgReviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Srinivas Kandagatla authored
Audio Clock controller is a block inside LPASS which controls 2 Glitch free muxes to LPASS codec Macros. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20201026120221.18984-2-srinivas.kandagatla@linaro.orgReviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Douglas Anderson authored
The sc7180 lpass clock driver manages two different devices. These two devices were tangled together, using one probe and a lookup to figure out the real probe. I think it's cleaner to really separate the probe for these two devices since they're really different things, just both managed by the same driver. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201019154857.v5.2.I75c409497d4dea9daefa53ec5f93824081c4ecbe@changeidReviewed-by: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Douglas Anderson authored
Let's convert the lpass clock control driver to use devm. This is a few more lines of code, but it will be useful in a later patch which disentangles the two devices handled by this driver. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201019154857.v5.1.I4567b5e7e17bbb15ef063d447cb83fd43746cb18@changeidSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Taniya Das authored
Add support for the camera clock controller found on SC7180 based devices. This would allow camera drivers to probe and control their clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-5-git-send-email-tdas@codeaurora.org [sboyd@kernel.org: Mark hw array static, add UL to big vco numbers] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Taniya Das authored
The Camera Subsystem clock provider have a bunch of generic properties that are needed in a device tree. Add a YAML schemas for those. Add clock ids for camera clocks which are required to bring the camera subsystem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-4-git-send-email-tdas@codeaurora.orgReviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Taniya Das authored
Add programming sequence support for managing the Agera PLLs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-3-git-send-email-tdas@codeaurora.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
Taniya Das authored
Introduce clk_alpha_pll_write_config and alpha_pll_check_rate_margin helper functions to be across PLL configure functions and PLL set rate functions. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1602873815-1677-2-git-send-email-tdas@codeaurora.orgSigned-off-by: Stephen Boyd <sboyd@kernel.org>
-
- 25 Oct, 2020 17 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandomLinus Torvalds authored
Pull random32 updates from Willy Tarreau: "Make prandom_u32() less predictable. This is the cleanup of the latest series of prandom_u32 experimentations consisting in using SipHash instead of Tausworthe to produce the randoms used by the network stack. The changes to the files were kept minimal, and the controversial commit that used to take noise from the fast_pool (f227e3ec) was reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is fed from various sources of activities (networking, scheduling) to perturb the SipHash state using fast, non-trivially predictable data, instead of keeping it fully deterministic. The goal is essentially to make any occasional memory leakage or brute-force attempt useless. The resulting code was verified to be very slightly faster on x86_64 than what is was with the controversial commit above, though this remains barely above measurement noise. It was also tested on i386 and arm, and build- tested only on arm64" Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ * tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom: random32: add a selftest for the prandom32 code random32: add noise from network and scheduling activity random32: make prandom_u32() output unpredictable
-
Hans de Goede authored
Commit 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a41 ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
-