- 16 Jul, 2012 40 commits
-
-
Mike Snitzer authored
commit b0239faa upstream. If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and memory is fragmented and a sufficiently-large metadata device is used in a thin pool then the space map checker will fail to allocate the memory it requires. Switch from kmalloc to vmalloc to allow larger virtually contiguous allocations for the space map checker's internal count arrays. Reported-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 62662303 upstream. If CONFIG_DM_DEBUG_SPACE_MAPS is enabled and dm_sm_checker_create() fails, dm_tm_create_internal() would still return success even though it cleaned up all resources it was supposed to have created. This will lead to a kernel crash: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC ... RIP: 0010:[<ffffffff81593659>] [<ffffffff81593659>] dm_bufio_get_block_size+0x9/0x20 Call Trace: [<ffffffff81599bae>] dm_bm_block_size+0xe/0x10 [<ffffffff8159b8b8>] sm_ll_init+0x78/0xd0 [<ffffffff8159c1a6>] sm_ll_new_disk+0x16/0xa0 [<ffffffff8159c98e>] dm_sm_disk_create+0xfe/0x160 [<ffffffff815abf6e>] dm_pool_metadata_open+0x16e/0x6a0 [<ffffffff815aa010>] pool_ctr+0x3f0/0x900 [<ffffffff8158d565>] dm_table_add_target+0x195/0x450 [<ffffffff815904c4>] table_load+0xe4/0x330 [<ffffffff815917ea>] ctl_ioctl+0x15a/0x2c0 [<ffffffff81591963>] dm_ctl_ioctl+0x13/0x20 [<ffffffff8116a4f8>] do_vfs_ioctl+0x98/0x560 [<ffffffff8116aa51>] sys_ioctl+0x91/0xa0 [<ffffffff81869f52>] system_call_fastpath+0x16/0x1b Fix the space map checker code to return an appropriate ERR_PTR and have dm_sm_disk_create() and dm_tm_create_internal() check for it with IS_ERR. Reported-by:
-
Mike Snitzer authored
commit 25d7cd6f upstream. Cleanup the shadow table before destroying the transaction manager. Reference: leak was identified with kmemleak when running test_discard_random_sectors in the thinp-test-suite. Signed-off-by:
-
Milan Broz authored
commit 18068bdd upstream. Veritysetup is now part of cryptsetup package. Remove on-disk header description (which is not parsed in kernel) and point users to cryptsetup where it the format is documented. Mention units for block size paramaters. Fix target line specification and dmsetup parameters. Signed-off-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
majianpeng authored
commit 1850753d upstream. In ops_run_io(), the call to md_wait_for_blocked_rdev will decrement nr_pending so we lose the reference we hold on the rdev. So atomic_inc it first to maintain the reference. This bug was introduced by commit 73e92e51 md/raid5. Don't write to known bad block on doubtful devices. which appeared in 3.0, so patch is suitable for stable kernels since then. Signed-off-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit 055d3747 upstream. commit 58c54fcc md/raid10: handle further errors during fix_read_error better. in 3.1 added "r10_sync_page_io" which takes an IO size in sectors. But we were passing the IO size in bytes!!! This resulting in bio_add_page failing, and empty request being sent down, and a consequent BUG_ON in scsi_lib. [fix missing space in error message at same time] This fix is suitable for 3.1.y and later. Reported-by:
Christian Balzer <chibi@gol.com> Signed-off-by:
-
NeilBrown authored
commit fc448a18 upstream. If a RAID10 has an odd number of chunks - as might happen when there are an odd number of devices - the last chunk has no pair and so is not mirrored. We don't store data there, but when recovering the last device in an array we retry to recover that last chunk from a non-existent location. This results in an error, and the recovery aborts. When we get to that last chunk we should just stop - there is nothing more to do anyway. This bug has been present since the introduction of RAID10, so the patch is appropriate for any -stable kernel. Reported-by:
-
Shinya Kuribayashi authored
commit 476a7eeb upstream. Commit 300bab97 (hwspinlock/core: register a bank of hwspinlocks in a single API call, 2011-09-06) introduced 'hwspin_lock_register_single()' to register numerous (a bank of) hwspinlock instances in a single API, 'hwspin_lock_register()'. At which time, 'hwspin_lock_register()' accidentally passes 'local IDs' to 'hwspin_lock_register_single()', despite that ..._single() requires 'global IDs' to register hwspinlocks. We have to convert into global IDs by supplying the missing 'base_id'. Signed-off-by:
Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [ohad: fix error path of hwspin_lock_register, too] Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Ohad Ben-Cohen authored
commit e121aefa upstream. Remoteproc requires user space firmware loading support, so let's select FW_LOADER explicitly to avoid painful misconfigurations (which only show up in runtime). Reported-by:
Mark Grosen <mgrosen@ti.com> Signed-off-by:
-
Ohad Ben-Cohen authored
commit d5039426 upstream. OMAP_REMOTEPROC selects REMOTEPROC and RPMSG, both of which depend on EXPERIMENTAL, so let's have OMAP_REMOTEPROC depend on EXPERIMENTAL too, in order to avoid the below randconfig warnings. warning: (OMAP_REMOTEPROC) selects REMOTEPROC which has unmet direct dependencies (EXPERIMENTAL) warning: (OMAP_REMOTEPROC) selects RPMSG which has unmet direct dependencies (EXPERIMENTAL) Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Bruce Allan authored
commit 2e1706f2 upstream. Currently only used when packet split mode is enabled with jumbo frames, IP payload checksum (for fragmented UDP packets) is mutually exclusive with receive hashing offload since the hardware uses the same space in the receive descriptor for the hardware-provided packet checksum and the RSS hash, respectively. Users currently must disable jumbos when receive hashing offload is enabled, or vice versa, because of this incompatibility. Since testing has shown that IP payload checksum does not provide any real benefit, just remove it so that there is no longer a choice between jumbos or receive hashing offload but not both as done in other Intel GbE drivers (e.g. e1000, igb). Also, add a missing check for IP checksum error reported by the hardware; let the stack verify the checksum when this happens. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mark Rustad authored
commit 863555be upstream. Use rcu_dereference_protected to tell rcu that the ft_lport_lock is held during ft_lport_create. This resolved "suspicious RCU usage" warnings when debugging options are turned on. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Johannes Berg authored
commit eac9ac6d upstream. When authentication/association timed out, the driver would complain bitterly, printing the message ACTIVATE a non DRIVER active station id ... addr ... The cause turns out to be that when the AP station is added but we don't associate, the IWL_STA_UCODE_INPROGRESS is set but never cleared. This then causes iwl_restore_stations() to attempt to resend it because it uses the flag internally and uploads even if it didn't set it itself. To fix this issue and not upload the station again when it has already been removed by mac80211, clear the flag after adding it in case we add it only for association. Reviewed-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Junxiao Bi authored
commit 3e5d3c35 upstream. The unaligned io flag is set in the kiocb when an unaligned dio is issued, it should be cleared even when the dio fails, or it may affect the following io which are using the same kiocb. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Junxiao Bi authored
commit 2dfd0603 upstream. Ocfs2 uses kiocb.*private as a flag of unsigned long size. In commit a11f7e63 ocfs2: serialize unaligned aio, the unaligned io flag is involved in it to serialize the unaligned aio. As *private is not initialized in init_sync_kiocb() of do_sync_write(), this unaligned io flag may be unexpectly set in an aligned dio. And this will cause OCFS2_I(inode)->ip_unaligned_aio decreased to -1 in ocfs2_dio_end_io(), thus the following unaligned dio will hang forever at ocfs2_aiodio_wait() in ocfs2_file_aio_write(). Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Dan Carpenter authored
commit 48f8b641 upstream. The intent here was clearly to set result to true if the 0x40000000 flag was set. But instead there was a | vs & typo and we always set result to true. Artem: check the spec at wiki.laptop.org/images/5/5c/88ALP01_Datasheet_July_2007.pdf and this fix looks correct. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Linus Torvalds authored
commit 332a2e12 upstream. We already use them for openat() and friends, but fchdir() also wants to be able to use O_PATH file descriptors. This should make it comparable to the O_SEARCH of Solaris. In particular, O_PATH allows you to access (not-quite-open) a directory you don't have read persmission to, only execute permission. Noticed during development of multithread support for ksh93. Reported-by:
ольга крыжановская <olga.kryzhanovska@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stone Piao authored
commit f03ba7e9 upstream. After association, STA will go through eapol handshake with WPS enabled AP. It's observed that WPS handshake fails with some 11n AP. The reason for the failure is that the eapol packet is sent via 11n frame aggregation. The eapol packet should be sent directly without 11n aggregation. This patch fixes the problem by adding WPS session control while dequeuing Tx packets for transmission. Signed-off-by:
Stone Piao <piaoyun@marvell.com> Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Stone Piao authored
commit 92583924 upstream. Currently we check the sequence number of last packet received against start_win. If a sequence hole is detected, start_win is updated to next sequence number. Since the rx sequence number is initialized to 0, a corner case exists when BA setup happens immediately after association. As 0 is a valid sequence number, start_win gets increased to 1 incorrectly. This causes the first packet with sequence number 0 being dropped. Initialize rx sequence number as 0xffff and skip adjusting start_win if the sequence number remains 0xffff. The sequence number will be updated once the first packet is received. Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
-
Johannes Berg authored
commit 4b5ebccc upstream. When receiving an "individually addressed" action frame, the receiver is required to return it to the sender. mac80211 gets this wrong as it also returns group addressed (mcast) frames to the sender. Fix this and update the reference to the new 802.11 standards version since things were shuffled around significantly. Signed-off-by:
-
Eliad Peller authored
commit 88a9e31c upstream. ieee80211_set_disassoc() clears ifmgd->bssid before building DELBA frames, resulting in frames with invalid bssid ("00:00:00:00:00:00"). Fix it by clearing ifmgd->bssid only after building all the needed frames. After this change, we no longer need to save the bssid (before clearing it), so remove the local array. Reported-by:
Ido Yariv <ido@wizery.com> Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Larry Finger authored
commit f63d7dab upstream. The latest Realtek driver for the RTL8188CU and RTL8192CU chips adds three new USB IDs. Reported-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Mitch A Williams authored
commit 0e90b49c upstream. Using ethtool -C ethX rx-usecs 0 crashes with a divide by zero. Refactor this function to fix this issue and make it more clear what the intent of each conditional is. Add comment regarding using a setting of zero. CC: David Ahern <daahern@cisco.com> Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
H. Peter Anvin authored
commit 4ad33411 upstream. It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by:
Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Suresh Siddha authored
commit 0b91f45b upstream. Signal delivery compat path may not have the 'TS_COMPAT' flag (that flag indicates how we entered the kernel). So use test_thread_flag(TIF_IA32) instead of is_ia32_task(): one of the functions of TIF_IA32 is just what kind of signal frame we want. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1339722435.3475.57.camel@sbsiddha-desk.sc.intel.comSigned-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Will Deacon authored
commit e734568b upstream. The OProfile perf backend uses a static array to keep track of the perf events on the system. When compiling with CONFIG_CPUMASK_OFFSTACK=y && SMP, nr_cpumask_bits is not a compile-time constant and the build will fail with: oprofile_perf.c:28: error: variably modified 'perf_events' at file scope This patch uses NR_CPUs instead of nr_cpumask_bits for the array initialisation. If this causes space problems in the future, we can always move to dynamic allocation for the events array. Cc: Matt Fleming <matt@console-pimps.org> Reported-by:
Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Signed-off-by:
-
Bjørn Mork authored
commit d9b87068 upstream. usbnet_disconnect() will set intfdata to NULL before calling the minidriver unbind function. The cdc_wdm subdriver cannot know that it is disconnecting until the qmi_wwan unbind function has called its disconnect function. This means that we must be able to support the cdc_wdm subdriver operating normally while usbnet_disconnect() is running, and in particular that intfdata may be NULL. The only place this matters is in qmi_wwan_cdc_wdm_manage_power which is called from cdc_wdm. Simply testing for NULL intfdata there is sufficient to allow it to continue working at all times. Fixes this Oops where a cdc-wdm device was closed while the USB device was disconnecting, causing wdm_release to call qmi_wwan_cdc_wdm_manage_power after intfdata was set to NULL by usbnet_disconnect: [41819.087460] BUG: unable to handle kernel NULL pointer dereference at 00000080 [41819.087815] IP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] *pdpt = 000000000314f001 *pde = 0000000000000000 [41819.088028] Oops: 0002 [#1] SMP [41819.088028] Modules linked in: qmi_wwan option usb_wwan usbserial usbnet cdc_wdm nls_iso8859_1 nls_cp437 vfat fat usb_storage bnep rfcomm bluetooth parport_pc ppdev binfmt_misc iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables x_tables dm_crypt uvcvideo snd_hda_codec_realtek snd_hda_intel videobuf2_core snd_hda_codec joydev videodev videobuf2_vmalloc hid_multitouch snd_hwdep arc4 videobuf2_memops snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event ath9k mac80211 snd_seq ath9k_common ath9k_hw ath snd_timer snd_seq_device sparse_keymap dm_multipath scsi_dh coretemp mac_hid snd soundcore cfg80211 snd_page_alloc psmouse serio_raw microcode lp parport dm_mirror dm_region_hash dm_log usbhid hid i915 drm_kms_helper drm r8169 i2c_algo_bit wmi video [last unloaded: qmi_wwan] [41819.088028] [41819.088028] Pid: 23292, comm: qmicli Not tainted 3.4.0-5-generic #11-Ubuntu GIGABYTE T1005/T1005 [41819.088028] EIP: 0060:[<f8640458>] EFLAGS: 00010246 CPU: 1 [41819.088028] EIP is at qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] [41819.088028] EAX: 00000000 EBX: 00000000 ECX: 000000c3 EDX: 00000000 [41819.088028] ESI: c3b27658 EDI: 00000000 EBP: c298bea4 ESP: c298be98 [41819.088028] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [41819.088028] CR0: 8005003b CR2: 00000080 CR3: 3605e000 CR4: 000007f0 [41819.088028] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [41819.088028] DR6: ffff0ff0 DR7: 00000400 [41819.088028] Process qmicli (pid: 23292, ti=c298a000 task=f343b280 task.ti=c298a000) [41819.088028] Stack: [41819.088028] 00000000 c3b27658 e2a80d00 c298beb0 f864051a c3b27600 c298bec0 f9027099 [41819.088028] c2fd6000 00000008 c298bef0 c1147f96 00000001 00000000 00000000 f4e54790 [41819.088028] ecf43a00 ecf43a00 c2fd6008 c2fd6000 ebbd7600 ffffffb9 c298bf08 c1144474 [41819.088028] Call Trace: [41819.088028] [<f864051a>] qmi_wwan_cdc_wdm_manage_power+0x1a/0x20 [qmi_wwan] [41819.088028] [<f9027099>] wdm_release+0x69/0x70 [cdc_wdm] [41819.088028] [<c1147f96>] fput+0xe6/0x210 [41819.088028] [<c1144474>] filp_close+0x54/0x80 [41819.088028] [<c1046a65>] put_files_struct+0x75/0xc0 [41819.088028] [<c1046b56>] exit_files+0x46/0x60 [41819.088028] [<c1046f81>] do_exit+0x141/0x780 [41819.088028] [<c107248f>] ? wake_up_state+0xf/0x20 [41819.088028] [<c1053f48>] ? signal_wake_up+0x28/0x40 [41819.088028] [<c1054f3b>] ? zap_other_threads+0x6b/0x80 [41819.088028] [<c1047864>] do_group_exit+0x34/0xa0 [41819.088028] [<c10478e8>] sys_exit_group+0x18/0x20 [41819.088028] [<c15bb7df>] sysenter_do_call+0x12/0x28 [41819.088028] Code: 04 83 e7 01 c1 e7 03 0f b6 42 18 83 e0 f7 09 f8 88 42 18 8b 43 04 e8 48 9a dd c8 89 f0 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 <f0> ff 88 80 00 00 00 0f 94 c0 84 c0 75 b7 31 f6 8b 5d f4 89 f0 [41819.088028] EIP: [<f8640458>] qmi_wwan_manage_power+0x68/0x90 [qmi_wwan] SS:ESP 0068:c298be98 [41819.088028] CR2: 0000000000000080 [41819.149492] ---[ end trace 0944479ff8257f55 ]--- Reported-by:
Marius Bjørnstad Kotsbak <marius.kotsbak@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit b9f90eb2 upstream. Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by:
Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Signed-off-by:
-
Andrew Bird (Sphere Systems) authored
commit f7142e6c upstream. Signed-off-by:
Andrew Bird <ajb@spheresystems.co.uk> Acked-by:
-
Andrew Bird (Sphere Systems) authored
commit 00001880 upstream. Change the forced interface 4 whitelist to use the generic shared binder instead of the Gobi specific one. Certain ZTE devices (K3520-Z & K3765-Z) don't work with the Gobi version, but function quite happily with the generic. This has been tested with the following devices: K3520-Z K3565-Z K3765-Z K4505-Z It hasn't been tested with the ZTE MF820D, which is the only other device that uses this whitelist at present. Although Bjorn doesn't expect any problems, any testing with that device would be appreciated. Signed-off-by:
-
Hui Wang authored
commit 85f2f834 upstream. The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Hui Wang <jason77.wang@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Dan Carpenter authored
commit d9cb9bd6 upstream. (CAN_CTRLMODE_LISTENONLY & CAN_CTRLMODE_LOOPBACK) is (0x02 & 0x01) which is zero so the condition is never true. The intent here was to test that both flags were set. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Alexander Duyck authored
commit 57efd44c upstream. FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by:
-
Marek Lindner authored
commit 5870adc6 upstream. bug introduced with 59b699cd If the source or destination mac address of an ethernet packet could not be found in the translation table the packet was dropped if AP isolation was turned on. This behavior would make it impossible to send broadcast packets over the mesh as the broadcast address will never enter the translation table. Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Acked-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
-
Antonio Quartulli authored
commit 2c995ff8 upstream. skb_linearize(skb) possibly rearranges the skb internal data and then changes the skb->data pointer value. For this reason any other pointer in the code that was assigned skb->data before invoking skb_linearise(skb) must be re-assigned. In the current tt_query message handling code this is not done and therefore, in case of skb linearization, the pointer used to handle the packet header ends up in pointing to free'd memory. This bug was introduced by a73105b8 (batman-adv: improved client announcement mechanism) Signed-off-by:
-
Eliad Peller authored
commit fe20b39e upstream. reg_timeout_work() calls restore_regulatory_settings() which takes cfg80211_mutex. reg_set_request_processed() already holds cfg80211_mutex before calling cancel_delayed_work_sync(reg_timeout), so it might deadlock. Call the async cancel_delayed_work instead, in order to avoid the potential deadlock. This is the relevant lockdep warning: cfg80211: Calling CRDA for country: XX ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc5-wl+ #26 Not tainted ------------------------------------------------------- kworker/0:2/1391 is trying to acquire lock: (cfg80211_mutex){+.+.+.}, at: [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] but task is already holding lock: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((reg_timeout).work){+.+...}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c005b600>] wait_on_work+0x4c/0x154 [<c005c000>] __cancel_work_timer+0xd4/0x11c [<c005c064>] cancel_delayed_work_sync+0x1c/0x20 [<bf28b274>] reg_set_request_processed+0x50/0x78 [cfg80211] [<bf28bd84>] set_regdom+0x550/0x600 [cfg80211] [<bf294cd8>] nl80211_set_reg+0x218/0x258 [cfg80211] [<c03c7738>] genl_rcv_msg+0x1a8/0x1e8 [<c03c6a00>] netlink_rcv_skb+0x5c/0xc0 [<c03c7584>] genl_rcv+0x28/0x34 [<c03c6720>] netlink_unicast+0x15c/0x228 [<c03c6c7c>] netlink_sendmsg+0x218/0x298 [<c03933c8>] sock_sendmsg+0xa4/0xc0 [<c039406c>] __sys_sendmsg+0x1e4/0x268 [<c0394228>] sys_sendmsg+0x4c/0x70 [<c0013840>] ret_fast_syscall+0x0/0x3c -> #1 (reg_mutex){+.+.+.}: [<c008fd44>] validate_chain+0xb94/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28b2cc>] reg_todo+0x30/0x538 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 -> #0 (cfg80211_mutex){+.+.+.}: [<c008ed58>] print_circular_bug+0x68/0x2cc [<c008fb28>] validate_chain+0x978/0x10f0 [<c0090b68>] __lock_acquire+0x8c8/0x9b0 [<c0090d40>] lock_acquire+0xf0/0x114 [<c04734dc>] mutex_lock_nested+0x48/0x320 [<bf28ae00>] restore_regulatory_settings+0x34/0x418 [cfg80211] [<bf28b200>] reg_timeout_work+0x1c/0x20 [cfg80211] [<c0059f44>] process_one_work+0x2a0/0x480 [<c005a4b4>] worker_thread+0x1bc/0x2bc [<c0061148>] kthread+0x98/0xa4 [<c0014af4>] kernel_thread_exit+0x0/0x8 other info that might help us debug this: Chain exists of: cfg80211_mutex --> reg_mutex --> (reg_timeout).work Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((reg_timeout).work); lock(reg_mutex); lock((reg_timeout).work); lock(cfg80211_mutex); *** DEADLOCK *** 2 locks held by kworker/0:2/1391: #0: (events){.+.+.+}, at: [<c0059e94>] process_one_work+0x1f0/0x480 #1: ((reg_timeout).work){+.+...}, at: [<c0059e94>] process_one_work+0x1f0/0x480 stack backtrace: [<c001b928>] (unwind_backtrace+0x0/0x12c) from [<c0471d3c>] (dump_stack+0x20/0x24) [<c0471d3c>] (dump_stack+0x20/0x24) from [<c008ef70>] (print_circular_bug+0x280/0x2cc) [<c008ef70>] (print_circular_bug+0x280/0x2cc) from [<c008fb28>] (validate_chain+0x978/0x10f0) [<c008fb28>] (validate_chain+0x978/0x10f0) from [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) [<c0090b68>] (__lock_acquire+0x8c8/0x9b0) from [<c0090d40>] (lock_acquire+0xf0/0x114) [<c0090d40>] (lock_acquire+0xf0/0x114) from [<c04734dc>] (mutex_lock_nested+0x48/0x320) [<c04734dc>] (mutex_lock_nested+0x48/0x320) from [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) [<bf28ae00>] (restore_regulatory_settings+0x34/0x418 [cfg80211]) from [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) [<bf28b200>] (reg_timeout_work+0x1c/0x20 [cfg80211]) from [<c0059f44>] (process_one_work+0x2a0/0x480) [<c0059f44>] (process_one_work+0x2a0/0x480) from [<c005a4b4>] (worker_thread+0x1bc/0x2bc) [<c005a4b4>] (worker_thread+0x1bc/0x2bc) from [<c0061148>] (kthread+0x98/0xa4) [<c0061148>] (kthread+0x98/0xa4) from [<c0014af4>] (kernel_thread_exit+0x0/0x8) cfg80211: Calling CRDA to update world regulatory domain cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Signed-off-by:
-
Alan Stern authored
commit 0070513b upstream. This patch (as1560) reverts commit afff07e6 (usb-storage: Add 090c:1000 to unusal-devs). It is no longer needed, because usb-storage now tells the sd driver to try READ CAPACITY(10) before READ CAPACITY(16) for every USB mass-storage device. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Hans de Goede <hdegoede@redhat.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Alan Stern authored
commit 6a0bdffa upstream. Several bug reports have been received recently for USB mass-storage devices that don't handle READ CAPACITY(16) commands properly. They report bogus sizes, in some cases becoming unusable as a result. The bugs were triggered by commit 09b6b51b (SCSI & usb-storage: add flags for VPD pages and REPORT LUNS), which caused usb-storage to stop overriding the SCSI level reported by devices. By default, the sd driver will try READ CAPACITY(16) first for any device whose level is above SCSI_SPC_2. It seems likely that any device large enough to require the use of READ CAPACITY(16) (i.e., 2 TB or more) would be able to handle READ CAPACITY(10) commands properly. Indeed, I don't know of any devices that don't handle READ CAPACITY(10) properly. Therefore this patch (as1559) adds a new flag telling the sd driver to try READ CAPACITY(10) before READ CAPACITY(16), and sets this flag for every USB mass-storage device. If a device really is larger than 2 TB, sd will fall back to READ CAPACITY(16) just as it used to. This fixes Bugzilla #43391. Signed-off-by:
-
Craig Shelley authored
commit 3fcc8f96 upstream. This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by:
Craig Shelley <craig@microtron.org.uk> Signed-off-by:
-
Forest Bond authored
commit 065b07e7 upstream. This device is also known as the Verizon USB551L. Signed-off-by:
Forest Bond <forest.bond@rapidrollout.com> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
