- 06 Mar, 2019 7 commits
-
-
Chao Yu authored
As Dan reported: "We put an upper bound on ->write_io_size_bits but we don't have a lower bound." So let's add lower bound check for ->write_io_size_bits in parse_options(). [We don't allow configuring ->write_io_size_bits to zero, since at least we need to fill one dummy page for aligned IO.] Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
We use below condition to check inline_xattr_size boundary: if (!F2FS_OPTION(sbi).inline_xattr_size || F2FS_OPTION(sbi).inline_xattr_size >= DEF_ADDRS_PER_INODE - F2FS_TOTAL_EXTRA_ATTR_SIZE - DEF_INLINE_RESERVED_SIZE - DEF_MIN_INLINE_SIZE) There is there problems in that check: - we should allow inline_xattr_size equaling to min size of inline {data,dentry} area. - F2FS_TOTAL_EXTRA_ATTR_SIZE and inline_xattr_size are based on different size unit, previous one is 4 bytes, latter one is 1 bytes. - DEF_MIN_INLINE_SIZE only indicate min size of inline data area, however, we need to consider min size of inline dentry area as well, minimal inline dentry should at least contain two entries: '.' and '..', so that min inline_dentry size is 40 bytes. .bitmap 1 * 1 = 1 .reserved 1 * 1 = 1 .dentry 11 * 2 = 22 .filename 8 * 2 = 16 total 40 Signed-off-by: -
Sahitya Tummala authored
Fix below warning coming because of using mutex lock in atomic context. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98 in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh Preemption disabled at: __radix_tree_preload+0x28/0x130 Call trace: dump_backtrace+0x0/0x2b4 show_stack+0x20/0x28 dump_stack+0xa8/0xe0 ___might_sleep+0x144/0x194 __might_sleep+0x58/0x8c mutex_lock+0x2c/0x48 f2fs_trace_pid+0x88/0x14c f2fs_set_node_page_dirty+0xd0/0x184 Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with spin_lock() acquired. Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Reviewed-by:
-
Chao Yu authored
Previously, we changed lock from cp_rwsem to node_change, it solved the deadlock issue which was caused by below race condition: Thread A Thread B - f2fs_setattr - f2fs_lock_op -- read_lock - dquot_transfer - __dquot_transfer - dquot_acquire - commit_dqblk - f2fs_quota_write - f2fs_write_begin - f2fs_write_failed - write_checkpoint - block_operations - f2fs_lock_all -- write_lock - f2fs_truncate_blocks - f2fs_lock_op -- read_lock But it breaks the sematics of cp_rwsem, in other callers like: - f2fs_file_write_iter -> f2fs_write_begin -> f2fs_write_failed - f2fs_direct_IO -> f2fs_write_failed We allow to truncate dnode w/o cp_rwsem held, result in incorrect sit bitmap update, which can cause further data corruption. So this patch reverts previous fix implementation, and try to fix deadlock by skipping calling f2fs_truncate_blocks() in f2fs_write_failed() only for quota file, and keep the preallocated data/node in the tail of quota file, we can expecte that the preallocated space can be used to store quota info latter soon. Fixes: af033b2a ("f2fs: guarantee journalled quota data by checkpoint") Signed-off-by:Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
-
Chengguang Xu authored
When sb->s_root is NULL dput() will do nothing, so jump to label 'free_node_inode' instead of lable 'free_root_inode' when failing from d_make_root(). Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
Chao Yu authored
We missed to add document for inline_xattr_size mount option in f2fs.txt, add it. Signed-off-by:
-
zhengliang authored
v4: Rearrange the previous three versions. The following scenario could lead to data block override by mistake. TASK A | TASK kworker | TASK B | TASK C | | | open | | | write | | | close | | | | f2fs_write_data_pages | | | f2fs_write_cache_pages | | | f2fs_outplace_write_data | | | f2fs_allocate_data_block (get block in seg S, | | | S is full, and only | | | have this valid data | | | block) | | | allocate_segment | | | locate_dirty_segment (mark S as PRE) | | | f2fs_submit_page_write (submit but is not | | | written on dev) | | unlink | | | iput_final | | | f2fs_drop_inode | | | f2fs_truncate | | | (not evict) | | | | | write_checkpoint | | | flush merged bio but not wait file data writeback | | | set_prefree_as_free (mark S as FREE) | | | | update NODE/DATA | | | allocate_segment (select S) | writeback done | | So we need to guarantee io complete before truncate inode in f2fs_drop_inode. Reviewed-by:Zheng Liang <zhengliang6@huawei.com> Signed-off-by:
-
- 16 Feb, 2019 8 commits
-
-
Geliang Tang authored
lengh -> length Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Reviewed-by:
-
Gao Xiang authored
Let's use xattr_prefix instead of open code. No logic changes. Signed-off-by:
-
Jaegeuk Kim authored
Some works after roll-forward recovery can get an error which will release all the data structures. Let's flush them in order to make it clean. One possible corruption came from: [ 90.400500] list_del corruption. prev->next should be ffffffed1f566208, but was (null) [ 90.675349] Call trace: [ 90.677869] __list_del_entry_valid+0x94/0xb4 [ 90.682351] remove_dirty_inode+0xac/0x114 [ 90.686563] __f2fs_write_data_pages+0x6a8/0x6c8 [ 90.691302] f2fs_write_data_pages+0x40/0x4c [ 90.695695] do_writepages+0x80/0xf0 [ 90.699372] __writeback_single_inode+0xdc/0x4ac [ 90.704113] writeback_sb_inodes+0x280/0x440 [ 90.708501] wb_writeback+0x1b8/0x3d0 [ 90.712267] wb_workfn+0x1a8/0x4d4 [ 90.715765] process_one_work+0x1c0/0x3d4 [ 90.719883] worker_thread+0x224/0x344 [ 90.723739] kthread+0x120/0x130 [ 90.727055] ret_from_fork+0x10/0x18 Reported-by:
-
Jaegeuk Kim authored
After quota_off, we'll get some dirty blocks. If put_super don't have a chance to flush them by checkpoint, it causes NULL pointer exception in end_io after iput(node_inode). (e.g., by checkpoint=disable) Reviewed-by:
-
Jaegeuk Kim authored
If dcc_info is not set yet, we can get null pointer panic. Reviewed-by:
-
Jaegeuk Kim authored
Otherwise, it wakes up discard thread which will sleep again by busy IOs in a loop. Reviewed-by:
-
Jaegeuk Kim authored
If every discard were issued successfully, we can avoid further discard. Reviewed-by:
-
Jaegeuk Kim authored
This mode returns mount() quickly with EAGAIN. We can trigger this by shutdown(F2FS_GOING_DOWN_NEED_FSCK). Reviewed-by:
-
- 04 Feb, 2019 1 commit
-
-
Jaegeuk Kim authored
When we umount f2fs, we need to avoid long delay due to discard commands, which is actually taking tens of seconds, if storage is very slow on UNMAP. So, this patch introduces timeout-based work on it. By default, let me give 5 seconds for discard. Reviewed-by:
-
- 22 Jan, 2019 6 commits
-
-
Chao Yu authored
In order to record direct IO count, we add two additional type in enum count_type: F2FS_DIO_{WRITE,READ}, but those IO won't dirty filesystem metadata, so we don't need to set filesystem dirty in inc_page_count(), fix it. Fixes: 02b16d0a ("f2fs: add to account direct IO") Signed-off-by: -
Chao Yu authored
As Dan Carpenter as below: The patch df634f444ee9: "f2fs: use rb_*_cached friends" from Oct 4, 2018, leads to the following static checker warning: fs/f2fs/extent_cache.c:606 f2fs_update_extent_tree_range() error: uninitialized symbol 'leftmost'. And also Eric Biggers, and Kyungtae Kim reported, there is an UBSAN warning described as below: We report a bug in linux-4.20.2: "UBSAN: Undefined behaviour in fs/f2fs/extent_cache.c" kernel config: https://kt0755.github.io/etc/config_v4.20_stable repro: https://kt0755.github.io/etc/repro.4a3e7.c (f2fs is mounted on /mnt/f2fs/) This arose in f2fs_update_extent_tree_range (fs/f2fs/extent_cache.c:605). It seems that, for some reason, its last argument became "24" although that was supposed to be bool type. ========================================= UBSAN: Undefined behaviour in fs/f2fs/extent_cache.c:605:4 load of value 24 is not a valid value for type '_Bool' CPU: 0 PID: 6774 Comm: syz-executor5 Not tainted 4.20.2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xb1/0x118 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_load_invalid_value+0x17a/0x1be lib/ubsan.c:457 f2fs_update_extent_tree_range+0x1d4a/0x1d50 fs/f2fs/extent_cache.c:605 f2fs_update_extent_cache+0x2b6/0x350 fs/f2fs/extent_cache.c:804 f2fs_update_data_blkaddr+0x61/0x70 fs/f2fs/data.c:656 f2fs_outplace_write_data+0x1d6/0x4b0 fs/f2fs/segment.c:3140 f2fs_convert_inline_page+0x86d/0x2060 fs/f2fs/inline.c:163 f2fs_convert_inline_inode+0x6b5/0xad0 fs/f2fs/inline.c:208 f2fs_preallocate_blocks+0x78b/0xb00 fs/f2fs/data.c:982 f2fs_file_write_iter+0x31b/0xf40 fs/f2fs/file.c:3062 call_write_iter include/linux/fs.h:1857 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x538/0x6e0 fs/read_write.c:487 vfs_write+0x1b3/0x520 fs/read_write.c:549 ksys_write+0xde/0x1c0 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x7e/0xc0 fs/read_write.c:607 do_syscall_64+0xbe/0x4f0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4497b9 Code: e8 8c 9f 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 9b 6b fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1ea15edc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f1ea15ee6cc RCX: 00000000004497b9 RDX: 0000000000001000 RSI: 0000000020000140 RDI: 0000000000000013 RBP: 000000000071bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000bb50 R14: 00000000006f4bf0 R15: 00007f1ea15ee700 ========================================= As I checked, this uninitialized variable won't cause extent cache corruption, but in order to avoid such kind of warning of both UBSAN and smatch, fix to initialize related variable. Reported-by:
Eric Biggers <ebiggers@google.com> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Signed-off-by:
-
Sheng Yong authored
When setting /sys/fs/f2fs/<DEV>/iostat_enable with non-bool value, UBSAN reports the following warning. [ 7562.295484] ================================================================================ [ 7562.296531] UBSAN: Undefined behaviour in fs/f2fs/f2fs.h:2776:10 [ 7562.297651] load of value 64 is not a valid value for type '_Bool' [ 7562.298642] CPU: 1 PID: 7487 Comm: dd Not tainted 4.20.0-rc4+ #79 [ 7562.298653] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 7562.298662] Call Trace: [ 7562.298760] dump_stack+0x46/0x5b [ 7562.298811] ubsan_epilogue+0x9/0x40 [ 7562.298830] __ubsan_handle_load_invalid_value+0x72/0x90 [ 7562.298863] f2fs_file_write_iter+0x29f/0x3f0 [ 7562.298905] __vfs_write+0x115/0x160 [ 7562.298922] vfs_write+0xa7/0x190 [ 7562.298934] ksys_write+0x50/0xc0 [ 7562.298973] do_syscall_64+0x4a/0xe0 [ 7562.298992] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 7562.299001] RIP: 0033:0x7fa45ec19c00 [ 7562.299004] Code: 73 01 c3 48 8b 0d 88 92 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d dd eb 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ce 8f 01 00 48 89 04 24 [ 7562.299044] RSP: 002b:00007ffca52b49e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 7562.299052] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa45ec19c00 [ 7562.299059] RDX: 0000000000000400 RSI: 000000000093f000 RDI: 0000000000000001 [ 7562.299065] RBP: 000000000093f000 R08: 0000000000000004 R09: 0000000000000000 [ 7562.299071] R10: 00007ffca52b47b0 R11: 0000000000000246 R12: 0000000000000400 [ 7562.299077] R13: 000000000093f000 R14: 000000000093f400 R15: 0000000000000000 [ 7562.299091] ================================================================================ So, if iostat_enable is enabled, set its value as true. Signed-off-by:
-
Sheng Yong authored
Signed-off-by:
-
Sheng Yong authored
Dentry bitmap is not enough to detect incorrect dentries. So this patch also checks the namelen value of a dentry. Signed-off-by:
Gong Chen <gongchen4@huawei.com> Signed-off-by:
-
Chao Yu authored
While traversing dirents in f2fs_fill_dentries(), if bitmap is valid, filename length should not be zero, otherwise, directory structure consistency could be corrupted, in this case, let's print related info and set SBI_NEED_FSCK to trigger fsck for repairing. Signed-off-by:
-
- 09 Jan, 2019 3 commits
-
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: linux-f2fs-devel@lists.sourceforge.net Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Jaegeuk Kim authored
This exports pin_file status to user. Reviewed-by:
-
Chao Yu authored
Type of inject_rate is unsigned int, let's check new value's validity during configuring. Signed-off-by:
-
- 08 Jan, 2019 5 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: fs/f2fs/data.c: In function 'f2fs_dio_submit_bio': fs/f2fs/data.c:2585:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Zhikang Zhang authored
We meet these compile warnings below, which caused by missing declare structs: struct f2fs_io_info, struct extent, struct f2fs_sb_info. warning: 'struct f2fs_io_info' declared inside parameter list warning: 'struct extent_info' declared inside parameter list warning: 'struct f2fs_sb_info' declared inside parameter list Signed-off-by:
Zhikang Zhang <zhangzhikang1@huawei.com> Reviewed-by:
-
Chengguang Xu authored
The error case of failing allocating memory should return -ENOMEM. Signed-off-by:
-
Jaegeuk Kim authored
This fixes wrong access of address spaces of node and meta inodes after iput. Fixes: 60aa4d55 ("f2fs: fix use-after-free issue when accessing sbi->stat_info") Reviewed-by:
-
Jaegeuk Kim authored
Otherwise, we can get wrong counts incurring checkpoint hang. IO_W (CP: -24, Data: 24, Flush: ( 0 0 1), Discard: ( 0 0)) Thread A Thread B - f2fs_write_data_pages - __write_data_page - f2fs_submit_page_write - inc_page_count(F2FS_WB_DATA) type is F2FS_WB_DATA due to file is non-atomic one - f2fs_ioc_start_atomic_write - set_inode_flag(FI_ATOMIC_FILE) - f2fs_write_end_io - dec_page_count(F2FS_WB_CP_DATA) type is F2FS_WB_DATA due to file becomes atomic one Cc: <stable@vger.kernel.org> Reviewed-by:
-
- 07 Jan, 2019 4 commits
-
-
Masahiro Yamada authored
For some reasons, I accidentally got rid of "generic-y += shmparam.h" from some architectures. Restore them to fix building c6x, h8300, hexagon, m68k, microblaze, openrisc, and unicore32. Fixes: d6e4b3e3 ("arch: remove redundant UAPI generic-y defines") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
-
- 06 Jan, 2019 6 commits
-
-
Linus Torvalds authored
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: -
Linus Torvalds authored
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscryptLinus Torvalds authored
Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs -
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
-
