- 05 Jun, 2018 35 commits
-
-
Eugen Hristev authored
commit 76974ef9 upstream. We need to select the buffer code, otherwise we get build errors with undefined functions on the trigger and buffer, if we select just IIO and then AT91_SAMA5D2_ADC from menuconfig This adds a Kconfig 'select' statement like other ADC drivers have it already. Fixes: 5e1a1da0 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Kelly authored
commit 3d13de4b upstream. Currently, the following causes a kernel OOPS in memcpy: echo 1073741825 > buffer/length echo 1 > buffer/enable Note that using 1073741824 instead of 1073741825 causes "write error: Cannot allocate memory" but no OOPS. This is because 1073741824 == 2^30 and 1073741825 == 2^30+1. Since kfifo rounds up to the nearest power of 2, it will actually call kmalloc with roundup_pow_of_two(length) * bytes_per_datum. Using length == 1073741825 and bytes_per_datum == 2, we get: kmalloc(roundup_pow_of_two(1073741825) * 2 or kmalloc(2147483648 * 2) or kmalloc(4294967296) or kmalloc(UINT_MAX + 1) so this overflows to 0, causing kmalloc to return ZERO_SIZE_PTR and subsequent memcpy to fail once the device is enabled. Fix this by checking for overflow prior to allocating a kfifo. With this check added, the above code returns -EINVAL when enabling the buffer, rather than causing an OOPS. Signed-off-by:
Martin Kelly <mkelly@xevo.com> cc: <Stable@vger.kernel.org> Signed-off-by:
-
Martin Kelly authored
commit c043ec1c upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by:
-
Michael Nosthoff authored
commit 490fba90 upstream. This commit is a follow-up to changes made to ad_sigma_delta.h in staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ which broke ad7793 as it was not altered to match those changes. This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute instead of using IIO_DEV_ATTR_SAMP_FREQ() macro. Move code from the functions associated with IIO_DEV_ATTR_SAMP_FREQ() into respective read and write hooks with the mask set to IIO_CHAN_INFO_SAMP_FREQ. Fixes: a13e831f ("staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ") Signed-off-by:
Michael Nosthoff <committed@heine.so> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
commit 607065ba upstream. When using large tcp_rmem[2] values (I did tests with 500 MB), I noticed overflows while computing rcvwin. Lets fix this before the following patch. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sodagudi Prasad authored
commit 0a5f4176 upstream. Currently, GCC disables -Wunused-const-variable, but not -Wunused-variable, so warns unused variables if they are non-constant. While, Clang does not warn unused variables at all regardless of the const qualifier because -Wno-unused-const-variable is implied by the stronger option -Wno-unused-variable. Disable -Wunused-const-variable instead of -Wunused-variable so that GCC and Clang work in the same way. Signed-off-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
commit d3b56c56 upstream. Pointer request is being assigned but never used, so remove it. Cleans up the clang warning: drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to 'request' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
commit 271ef65b upstream. The pointer dma_dev_name is assigned but never read, it is redundant and can therefore be removed. Cleans up clang warning: sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to 'dma_dev_name' is never read Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Matthias Kaehlcke authored
commit fb239c12 upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Matthias Kaehlcke authored
commit 42b5122e upstream. In several locations the driver uses AMD_CG_STATE_UNGATE (type enum amd_clockgating_state) instead of AMD_PG_STATE_UNGATE (type enum amd_powergating_stat) and vice versa. Both constants have the same value, so this doesn't cause any problems, but we still want to pass the correct type. Fixing the mismatch resolves multiple warnings like this when building with clang: drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_clockpowergating.c:169:7: error: implicit conversion from enumeration type 'enum amd_powergating_state' to different enumeration type 'enum amd_clockgating_state' [-Werror,-Wenum-conversion] AMD_PG_STATE_UNGATE); Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Colin Ian King authored
commit 531beb06 upstream. sg_table is being initialized and is never read before it is updated again later on, hence making the initialization redundant. Remove the initialization. Detected by clang scan-build: "warning: Value stored to 'sg_table' during its initialization is never read" Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Chris Wilson authored
commit cad9946c upstream. When we do a locked idle we know that afterwards all requests have been completed and the engines have been cleared of tasks. For whatever reason, this doesn't always happen and we may go into a suspend with ELSP still full, and this causes an issue upon resume as we get very, very confused. If the engines refuse to idle, mark the device as wedged. In the process we get rid of the maybe unused open-coded version of wait_for_engines reported by Nick Desaulniers and Matthias Kaehlcke. v2: Suppress the -EIO before suspend, but keep it for seqno wrap. References: https://bugs.freedesktop.org/show_bug.cgi?id=101891 References: https://bugs.freedesktop.org/show_bug.cgi?id=102456Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Nick Desaulniers authored
commit df16aaac upstream. When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC targets. These were added in commit 61163efa ("kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang"). Clang does not support -fno-delete-null-pointer-checks, so adding it to HOSTCFLAGS if HOSTCC is clang does not make sense. It's not clear why the other warnings were disabled, and just for HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile with clang just fine. Suggested-by:
Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by:
-
Eric Biggers authored
commit 81459649 upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sachin Grover authored
commit efe3de79 upstream. Call trace: [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428 [<ffffff9203a8dbf8>] show_stack+0x28/0x38 [<ffffff920409bfb8>] dump_stack+0xd4/0x124 [<ffffff9203d187e8>] print_address_description+0x68/0x258 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0 [<ffffff9203d1927c>] kasan_report+0x5c/0x70 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0 [<ffffff9203d17cdc>] memcpy+0x34/0x68 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120 [<ffffff9203d75d68>] getxattr+0x100/0x2c8 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28 If user get root access and calls security.selinux setxattr() with an embedded NUL on a file and then if some process performs a getxattr() on that file with a length greater than the actual length of the string, it would result in a panic. To fix this, add the actual length of the string to the security context instead of the length passed by the userspace process. Signed-off-by:
Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2824f503 upstream. The snapshot trigger currently only affects the main ring buffer, even when it is used by the instances. This can be confusing as the snapshot trigger is listed in the instance. > # cd /sys/kernel/tracing > # mkdir instances/foo > # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger > # echo top buffer > trace_marker > # echo foo buffer > instances/foo/trace_marker > # touch /tmp/bar > # chown rostedt /tmp/bar > # cat instances/foo/snapshot # tracer: nop # # # * Snapshot is freed * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') > # cat snapshot # tracer: nop # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | bash-1189 [000] .... 111.488323: tracing_mark_write: top buffer Not only did the snapshot occur in the top level buffer, but the instance snapshot buffer should have been allocated, and it is still free. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 86b389ff upstream. If a instance has an event trigger enabled when it is freed, it could cause an access of free memory. Here's the case that crashes: # cd /sys/kernel/tracing # mkdir instances/foo # echo snapshot > instances/foo/events/initcall/initcall_start/trigger # rmdir instances/foo Would produce: general protection fault: 0000 [#1] PREEMPT SMP PTI Modules linked in: tun bridge ... CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:clear_event_triggers+0x3b/0x70 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0 Call Trace: event_trace_del_tracer+0x2a/0xc5 instance_rmdir+0x15c/0x200 tracefs_syscall_rmdir+0x52/0x90 vfs_rmdir+0xdb/0x160 do_rmdir+0x16d/0x1c0 __x64_sys_rmdir+0x17/0x20 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe This was due to the call the clears out the triggers when an instance is being deleted not removing the trigger from the link list. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
-
Benjamin Tissoires authored
commit 40f7090b upstream. New ICs (like the one on the Lenovo T480s) answer to ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack as i2c_smbus_read_block_data() uses the values returned by the i2c device to know how many data it need to return. i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX) and there is no safeguard on how many bytes are provided in the return value. Ensure we always have enough space for any future firmware. Also 0-initialize the values to prevent any access to uninitialized memory. Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit ad8fb554 upstream. This time, Lenovo decided to go with different pieces in its latest series of Thinkpads. For those we have been able to test: - the T480 is using Synaptics with an IBM trackpoint -> it behaves properly with or without intertouch, there is no point not using RMI4 - the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint -> the touchpad doesn't behave properly under PS/2 so we have to switch it to RMI4 if we do not want to have disappointed users - the X280 is using Synaptics with an ALPS trackpoint -> the recent fixes in the trackpoint handling fixed it so upstream now works fine with or without RMI4, and there is no point not using RMI4 - the T480s is using an Elan touchpad, so that's a different story Cc: <stable@vger.kernel.org> # v4.14.x, v4.15.x, v4.16.x Signed-off-by:
-
Aaron Ma authored
commit 5717a09a upstream. Synaptics devices reported it has Intertouch support, and it fails via PS/2 as following logs: psmouse serio2: Failed to reset mouse on synaptics-pt/serio0 psmouse serio2: Failed to enable mouse on synaptics-pt/serio0 Set these new devices to use SMBus to fix this issue, then they report SMBus version 3 is using, patch: https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and makes synaptics devices work fine on SMBus mode. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Edvard Holst authored
commit 15e2cffe upstream. Lenovo use two different trackpoints in the fifth generation Thinkpad X1 Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing. This patch is for the Elantech trackpoint specifically which also reports SMB version 3 so rmi_smbus needs to be updated in order to handle it. For the record, I was not the first one to come up with this patch as it has been floating around the internet for a while now. However, I have spent significant time with testing and my efforts to find the original author of the patch have been unsuccessful. Signed-off-by:
Edvard Holst <edvard.holst@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit 9b207102 upstream. The touchpad on Lenovo Carbon X1 Gen 5 (2017 - Kabylake) is accessible over SMBUS/RMI, so let's activate it by default. Cc: stable@vger.kernel.org Reviewed-by:
-
Brian Foster authored
commit a27ba260 upstream. The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by:
-
Dave Chinner authored
commit a78ee256 upstream. The AGFL size calculation is about to get more complex, so lets turn the macro into a function first and remove the macro. Signed-off-by:
Dave Chinner <dchinner@redhat.com> [darrick: forward port to newer kernel, simplify the helper] Signed-off-by:
-
Dexuan Cui authored
commit de0aa7b2 upstream. 1. With the patch "x86/vector/msi: Switch to global reservation mode", the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM with SR-IOV. This is because when we reach hv_compose_msi_msg() by request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup() -> __irq_startup() -> irq_domain_activate_irq() -> ... -> msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is disabled in __setup_irq(). Note: when we reach hv_compose_msi_msg() by another code path: pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... -> hv_compose_msi_msg(), local irq is not disabled. hv_compose_msi_msg() depends on an interrupt from the host. With interrupts disabled, a UP VM always hangs in the busy loop in the function, because the interrupt callback hv_pci_onchannelcallback() can not be called. We can do nothing but work it around by polling the channel. This is ugly, but we don't have any other choice. 2. If the host is ejecting the VF device before we reach hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg() forever, because at this time the host doesn't respond to the CREATE_INTERRUPT request. This issue exists the first day the pci-hyperv driver appears in the kernel. Luckily, this can also by worked around by polling the channel for the PCI_EJECT message and hpdev->state, and by checking the PCI vendor ID. Note: actually the above 2 issues also happen to a SMP VM, if "hbus->hdev->channel->target_cpu == smp_processor_id()" is true. Fixes: 4900be83 ("x86/vector/msi: Switch to global reservation mode") Tested-by:
Adrian Suhov <v-adsuho@microsoft.com> Tested-by:
Chris Valean <v-chvale@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Cc: <stable@vger.kernel.org> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit bd36ea57 which is commit a7aa75a2 upstream. There's been too many complaints about this. Personally I think it's going to blow up when people hit this in mainline, but hey, it's not my systems. At least we don't have to backport the mess to the stable kernels to give them some more life to live unscathed :) Reported-by:
Timur Tabi <timur@codeaurora.org> Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Borislav Petkov authored
commit 78ce2410 upstream. ... into a global, two-dimensional array and service subsequent reads from that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs disabled). In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage of the bank->blocks pointer. Fixes: 27bd5950 ("x86/mce/AMD: Get address from already initialized block") Reported-by:
Johannes Hirte <johannes.hirte@datenkhaos.de> Tested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20180414004230.GA2033@probookSigned-off-by:
-
Yazen Ghannam authored
commit 8a331f4a upstream. Carve out the SMCA code in get_block_address() into a separate helper function. No functional change. Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> [ Save an indentation level. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Josh Poimboeuf authored
commit 0afd0d9e upstream. Objtool has some crude logic for detecting static "noreturn" functions (aka "dead ends"). This is necessary for being able to correctly follow GCC code flow when such functions are called. It's remotely possible for two functions to call each other via sibling calls. If they don't have RET instructions, objtool's noreturn detection logic goes into a recursive loop: drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!) drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!) Instead of reporting an error in this case, consider the functions to be non-dead-ends. Reported-and-tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: damian <damian.tometzki@icloud.com> Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 7dec80cc upstream. With the following commit: fd35c88b ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec299 ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 6f5ec299 upstream. Typically a switch table can be found by detecting a .rodata access followed an indirect jump: 1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx 1970: 00 196d: R_X86_64_32S .rodata+0x438 1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a> 1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4 Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata access uses RIP-relative addressing: 19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8> 19c0: R_X86_64_PC32 .rodata+0x45c 19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd> 19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4 In this case the relocation addend needs to be adjusted accordingly in order to find the location of the switch table. The fix is for case 3 (as described in the comments), but also make the existing case 1 & 2 checks more precise by only adjusting the addend for R_X86_64_PC32 relocations. This fixes the following warnings: drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame Reported-by:
-
Josh Poimboeuf authored
commit fd35c88b upstream. With GCC 8, some issues were found with the objtool switch table detection. 1) In the .rodata section, immediately after the switch table, there can be another object which contains a pointer to the function which had the switch statement. In this case objtool wrongly considers the function pointer to be part of the switch table. Fix it by: a) making sure there are no pointers to the beginning of the function; and b) making sure there are no gaps in the switch table. Only the former was needed, the latter adds additional protection for future optimizations. 2) In find_switch_table(), case 1 and case 2 are missing the check to ensure that the .rodata switch table data is anonymous, i.e. that it isn't already associated with an ELF symbol. Fix it by adding the same find_symbol_containing() check which is used for case 3. This fixes the following warnings with GCC 8: drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72 net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48 drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24 drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
-
Josh Poimboeuf authored
commit 13810435 upstream. GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in .text.unlikely. Properly detect the new subfunctions and treat them as extensions of the original functions. This fixes a bunch of warnings like: kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame Reported-and-tested-by:
damian <damian.tometzki@icloud.com> Reported-by:
-
Hugh Dickins authored
commit 145e1a71 upstream. George Boole would have noticed a slight error in 4.16 commit 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page"). Fix it, to match both the comment above it, and the original behaviour. Although anonymous pages are not marked PageDirty at first, we have an old habit of calling SetPageDirty when a page is removed from swap cache: so there's a category of ex-swap pages that are easily migratable, but were inadvertently excluded from compaction's async migration in 4.16. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils Fixes: 69d763fc ("mm: pin address_space before dereferencing it while isolating an LRU page") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
Ivan Kalvachev <ikalvachev@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Al Viro authored
commit 4faa9996 upstream. If io_destroy() gets to cancelling everything that can be cancelled and gets to kiocb_cancel() calling the function driver has left in ->ki_cancel, it becomes vulnerable to a race with IO completion. At that point req is already taken off the list and aio_complete() does *NOT* spin until we (in free_ioctx_users()) releases ->ctx_lock. As the result, it proceeds to kiocb_free(), freing req just it gets passed to ->ki_cancel(). Fix is simple - remove from the list after the call of kiocb_cancel(). All instances of ->ki_cancel() already have to cope with the being called with iocb still on list - that's what happens in io_cancel(2). Cc: stable@kernel.org Fixes: 0460fef2 "aio: use cancellation list lazily" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
- 30 May, 2018 5 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 5815901c which is 03080e5e ("vti4: Don't override MTU passed on link creation via IFLA_MTU") upstream as it causes test failures. This commit should not have been backported to anything older than 4.16, despite what the changelog said as the mtu must be set in older kernels, unlike is needed in 4.16 and newer. Thanks to Alistair Strachan for the debugging help figuring this out, and for 'git bisect' for making my life a whole lot easier. Cc: Alistair Strachan <astrachan@google.com> Cc: Stefano Brivio <sbrivio@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit f766148e which is commit ad46e48c upstream. It breaks the build. Turns out we don't test perf on stable releases, we need to fix that :( Reported-by:
Pavlos Parissis <pavlos.parissis@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Greg Kroah-Hartman authored
perf wants matching .h files otherwise it complains during the build process. As these files have been modified over the past few 4.14.y releases, they are out of sync, so fix that problem by properly copying the respective versions to the tools/ mirror copies. Signed-off-by:
-
