On cards where there's a specific BAR for PRAMIN, we used to try and fall
back to the "legacy" aperture within the mmio BAR.

This is doomed to cause problems, so lets just fail completely as there's
obviously something else very wrong anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

It appears version 0x21 'U' and 'd' tables require us to take the SOR link
into account when selecting the appropriate table for a particular output.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

debug only

agd5f: rebased
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

agd5f: rebased
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This fixes FDO bug #28375, it's kind of regression, so quite important to have
it for .35.

V2: Fix on RV770+ as well. All other chipsets have only one clock mode per
state.

V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen.

agd5f: rebased
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

track the current voltage level and avoid setting it
if the requested voltage is already set.

v2: check voltage type before checking current voltage
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The vddc value in the power tables is not an actual voltage
like on discrete r6xx/r7xx/evergreen systems, but instead has
a symbolic meaning (e.g., NONE, LOW, HIGH, etc.).  See atombios.h

Most RS780/RS880 vbioses don't have a SetVoltage table anyway,
so it shouldn't be doing anything to the hardware at the moment.

I need to figure out how voltage is supposed to work on the newer
IGPs; until then, disable it.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

I forgot to fix this in 8e36ed00Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This adds an additional profile, mid, to the pm profile
code which takes the place of the old low profile.  The default
behavior remains the same, e.g., auto profile now selects between
mid and high profiles based on power source, however, you can now
manually force the low profile which was previously only available
as a dpms off state.  Enabling the low profile when the displays
are on has been known to cause display corruption in some cases.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

- don't rest the power state in pm_init()
We already boot up to the default power state.  Note this
patch relies on:
drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+
To make sure the default power state matches the boot up state.

- In the pm resume path asic init will have set the power state
back to the default so reset the tracking state values.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Noticed by Rafał Miłecki.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is needed to enable accel in the ddx.  However,
due to a bug in older versions of the ddx, it relies
on accel being disabled in order to load properly on
evergreen chips.  To maintain compatility, we add a new
get accel param and call that from the ddx.  The old one
always returns false for evergreen cards.

[this fixes a regression with older userspaces on newer kernels].
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

copy_to/from_user() returns the number of bytes remaining to be copied
but we want to return a negative error code here.  This gets returned to
userspace.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

copy_from_user() returns the number of bytes left to be copied but we
want to return a negative error code here.  This is in the ioctl handler
so the error code get returned to userspace.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

using DRM_ERROR, results in people blaming the drm code for the oops, and
not looking at the oops.

(sadly yes I've gotten reports).
Signed-off-by: Dave Airlie <airlied@redhat.com>

PM attemps to unmap objects that aren't actually mapped into userspace ever,
so just don't bother unmapping them at this point, since all you are doing
is nothing. We should be making sure all access to these objects are locked in
kernel space instead. In theory the VRAM gart table is already done, and both
the shaders and stolen vga memory blocks are never accessed at runtime.

fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16127Reported-by: Jure Repnic <jlp.bugs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The previous commit fixes the problem, these commits make sure we actually
fail properly if it happens again.

I've squashed the commits from Chris since they are all fixing one issue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

(regression fix since fbdev/kms rework).

My fb rework didn't remember about the 84/65s.
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 962400e8, which was
entirely bogus.

The code used to multiply the character offset by "vc->vc_cols", and
that's actually correct, because 'd' itself is an 'unsigned short'.  So
the pointer arithmetic already takes the size of a VGA character into
account.  Changing it to use vc_size_row (which is just "vc_cols"
shifted up to take the size of the character into account) ends up
multiplying with the VGA character size twice.

This got reported as bugs for various other subsystems, because what it
actually results in is writing the 16-bit vc_video_erase_char pattern
(usually 0x0720: 0x07 is the default attribute, 0x20 is ASCII space)
into some random other allocation.

So Markus ended up reporting this as a ext4 bug, while to Torsten Kaiser
it looked like a problem with KMS or libata.  Jeff Chua saw it in
different places.

And finally - Justin Mattock had slab poisoning enabled, and saw it as a
slab poison overwritten.  And bisected and reverted this to verify the
buggy commit.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Frank Pan <frankpzh@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Cursors need to be in the GTT domain when being accessed by the GPU.
Previously this was a fortuitous byproduct of userspace using pwrite()
to upload the image data into the cursor. The redundant clflush was
removed in commit 9b8c4a and so the image was no longer being flushed
out of the caches into main memory. One could also devise a scenario
where the cursor was rendered by the GPU, prior to being attached as the
cursor, resulting in similar corruption due to the missing MI_FLUSH.

Fixes:

  Bug 28335 - Cursor corruption caused by commit 9b8c4a0b
  https://bugs.freedesktop.org/show_bug.cgi?id=28335Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix remaining racy updates of EXT4_I(inode)->i_flags
  ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only files

A few functions were still modifying i_flags in a racy manner.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: improve xfs_isilocked
  xfs: skip writeback from reclaim context
  xfs: remove done roadmap item from xfs-delayed-logging-design.txt
  xfs: fix race in inode cluster freeing failing to stale inodes
  xfs: fix access to upper inodes without inode64
  xfs: fix might_sleep() warning when initialising per-ag tree
  fs/xfs/quota: Add missing mutex_unlock
  xfs: remove duplicated #include
  xfs: convert more trace events to DEFINE_EVENT
  xfs: xfs_trace.c: remove duplicated #include
  xfs: Check new inode size is OK before preallocating
  xfs: clean up xlog_align
  xfs: cleanup log reservation calculactions
  xfs: be more explicit if RT mount fails due to config
  xfs: replace E2BIG with EFBIG where appropriate

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  X25: remove duplicated #include
  tcp: use correct net ns in cookie_v4_check()
  rps: tcp: fix rps_sock_flow_table table updates
  ppp_generic: fix multilink fragment sizes
  syncookies: remove Kconfig text line about disabled-by-default
  ixgbe: only check pfc bits in hang logic if pfc is enabled
  net: check for refcount if pop a stacked dst_entry
  ixgbe: return IXGBE_ERR_RAR_INDEX when out of range
  act_pedit: access skb->data safely
  sfc: Store port number in net_device::dev_id
  epic100: Test __BIG_ENDIAN instead of (non-existent) CONFIG_BIG_ENDIAN
  tehuti: return -EFAULT on copy_to_user errors
  isdn/kcapi: return -EFAULT on copy_from_user errors
  e1000e: change logical negate to bitwise
  sfc: Get port number from CS_PORT_NUM, not PCI function number
  cls_u32: use skb_header_pointer() to dereference data safely
  TCP: tcp_hybla: Fix integer overflow in slow start increment
  act_nat: fix the wrong checksum when addr isn't in old_addr/mask
  net/fec: fix pm to survive to suspend/resume
  korina: count RX DMA OVR as rx_fifo_error
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: remove obsolete declarations of cache constructor and destructor
  nilfs2: fix style issue in nilfs_destroy_cachep

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Minix: Clean up left over label
  fix truncate inode time modification breakage
  fix setattr error handling in sysfs, configfs
  fcntl: return -EFAULT if copy_to_user fails
  wrong type for 'magic' argument in simple_fill_super()
  fix the deadlock in qib_fs
  mqueue doesn't need make_bad_inode()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix bne2 "gave up waiting for init of module libcrc32c"
  module: verify_export_symbols under the lock
  module: move find_module check to end
  module: make locking more fine-grained.
  module: Make module sysfs functions private.
  module: move sysfs exposure to end of load_module
  module: fix kdb's illicit use of struct module_use.
  module: Make the 'usage' lists be two-way

Problem: it's hard to avoid an init routine stumbling over a
request_module these days.  And it's not clear it's always a bad idea:
for example, a module like kvm with dynamic dependencies on kvm-intel
or kvm-amd would be neater if it could simply request_module the right
one.

In this particular case, it's libcrc32c:

	libcrc32c_mod_init
	 crypto_alloc_shash
	  crypto_alloc_tfm
	   crypto_find_alg
	    crypto_alg_mod_lookup
	     crypto_larval_lookup
	      request_module

If another module is waiting inside resolve_symbol() for libcrc32c to
finish initializing (ie. bne2 depends on libcrc32c) then it does so
holding the module lock, and our request_module() can't make progress
until that is released.

Waiting inside resolve_symbol() without the lock isn't all that hard:
we just need to pass the -EBUSY up the call chain so we can sleep
where we don't hold the lock.  Error reporting is a bit trickier: we
need to copy the name of the unfinished module before releasing the
lock.

Other notes:
1) This also fixes a theoretical issue where a weak dependency would allow
   symbol version mismatches to be ignored.
2) We rename use_module to ref_module to make life easier for the only
   external user (the out-of-tree ksplice patches).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tim Abbot <tabbott@ksplice.com>
Tested-by: Brandon Philips <bphilips@suse.de>

It disabled preempt so it was "safe", but nothing stops another module
slipping in before this module is added to the global list now we don't
hold the lock the whole time.

So we check this just after we check for duplicate modules, and just
before we put the module in the global list.

(find_symbol finds symbols in coming and going modules, too).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

I think Rusty may have made the lock a bit _too_ finegrained there, and
didn't add it to some places that needed it. It looks, for example, like
PATCH 1/2 actually drops the lock in places where it's needed
("find_module()" is documented to need it, but now load_module() didn't
hold it at all when it did the find_module()).

Rather than adding a new "module_loading" list, I think we should be able
to just use the existing "modules" list, and just fix up the locking a
bit.

In fact, maybe we could just move the "look up existing module" a bit
later - optimistically assuming that the module doesn't exist, and then
just undoing the work if it turns out that we were wrong, just before
adding ourselves to the list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Kay Sievers <kay.sievers@vrfy.org> reports that we still have some
contention over module loading which is slowing boot.

Linus also disliked a previous "drop lock and regrab" patch to fix the
bne2 "gave up waiting for init of module libcrc32c" message.

This is more ambitious: we only grab the lock where we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Brandon Philips <brandon@ifup.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>

These were placed in the header in ef665c1a to get the various
SYSFS/MODULE config combintations to compile.

That may have been necessary then, but it's not now.  These functions
are all local to module.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Randy Dunlap <randy.dunlap@oracle.com>

This means a little extra work, but is more logical: we don't put
anything in sysfs until we're about to put the module into the
global list an parse its parameters.

This also gives us a logical place to put duplicate module detection
in the next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Linus changed the structure, and luckily this didn't compile any more.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>

When adding a module that depends on another one, we used to create a
one-way list of "modules_which_use_me", so that module unloading could
see who needs a module.

It's actually quite simple to make that list go both ways: so that we
not only can see "who uses me", but also see a list of modules that are
"used by me".

In fact, we always wanted that list in "module_unload_free()": when we
unload a module, we want to also release all the other modules that are
used by that module.  But because we didn't have that list, we used to
first iterate over all modules, and then iterate over each "used by me"
list of that module.

By making the list two-way, we simplify module_unload_free(), and it
allows for some trivial fixes later too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (cleaned & rebased)

Remove duplicated #include('s) in drivers/net/wan/x25_asy.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Its better to make a route lookup in appropriate namespace.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I believe a moderate SYN flood attack can corrupt RFS flow table
(rps_sock_flow_table), making RPS/RFS much less effective.

Even in a normal situation, server handling short lived sessions suffer
from bad steering for the first data packet of a session, if another SYN
packet is received for another session.

We do following action in tcp_v4_rcv() :

	sock_rps_save_rxhash(sk, skb->rxhash);

We should _not_ do this if sk is a LISTEN socket, as about each
packet received on a LISTEN socket has a different rxhash than
previous one.
 -> RPS_NO_CPU markers are spread all over rps_sock_flow_table.

Also, it makes sense to protect sk->rxhash field changes with socket
lock (We currently can change it even if user thread owns the lock
and might use rxhash)

This patch moves sock_rps_save_rxhash() to a sock locked section,
and only for non LISTEN sockets.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bug in multilink fragment size calculation introduced by
commit 9c705260
"ppp: ppp_mp_explode() redesign"
Signed-off-by: Ben McKeegan <ben@netservers.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>