Due to that, smatch warns with:

	drivers/staging/media/atomisp/pci/css_2401_system/host/csi_rx.c:18:11:  warning: symbol 'N_SHORT_PACKET_LUT_ENTRIES' was not declared. Should it be static?
	drivers/staging/media/atomisp/pci/css_2401_system/host/csi_rx.c:24:11:  warning: symbol 'N_LONG_PACKET_LUT_ENTRIES' was not declared. Should it be static?
	drivers/staging/media/atomisp/pci/css_2401_system/host/csi_rx.c:30:11:  warning: symbol 'N_CSI_RX_FE_CTRL_DLANES' was not declared. Should it be static?
	drivers/staging/media/atomisp/pci/css_2401_system/host/csi_rx.c:37:11:  warning: symbol 'N_CSI_RX_BE_SID_WIDTH' was not declared. Should it be static?
	drivers/staging/media/atomisp/pci/css_2401_system/host/ibuf_ctrl.c:19:11:  warning: symbol 'N_IBUF_CTRL_PROCS' was not declared. Should it be static?
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

solve this smatch warning:
	drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c:842 gmin_v1p8_ctrl() warn: variable dereferenced before check 'gs' (see line 832)

By moving the check to happen before its usage.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are several warnings reported by sparse with regards to wrong
typecasts:

    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:73:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:73:13:     expected void *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:73:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:247:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:247:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:247:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:248:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:248:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:248:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:249:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:249:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:249:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:250:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:250:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:250:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:282:30:  warning: incorrect type in argument 2 (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:282:30:     expected void const *from
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:282:30:     got struct atomisp_3a_statistics [noderef] __user *kp
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:308:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:308:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:308:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:327:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:327:13:     expected void [noderef] __user *effective_width
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:327:13:     got unsigned int [usertype] *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:348:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:348:13:     expected void [noderef] __user *effective_width
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:348:13:     got unsigned int [usertype] *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:372:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:372:13:     expected unsigned int [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:372:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:433:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:433:13:     expected struct v4l2_framebuffer *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:433:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:462:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:462:13:     expected void [noderef] __user *frame
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:462:13:     got struct v4l2_framebuffer *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:496:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:496:13:     expected unsigned short *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:496:13:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:511:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:511:13:     expected void [noderef] __user *calb_grp_values
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:511:13:     got unsigned short *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:630:21:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:630:21:     expected unsigned short [usertype] *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:630:21:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:715:27:  warning: cast removes address space '__user' of expression
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:715:27:  warning: incorrect type in initializer (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:715:27:     expected struct <noident> [noderef] __user *karg
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:715:27:     got void *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:721:39:  warning: cast removes address space '__user' of expression
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:21:  warning: incorrect type in argument 1 (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:21:     expected void const volatile [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:21:     got unsigned int [usertype] *src
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:43:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:43:     expected void *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:725:43:     got void [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:741:21:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:741:21:     expected struct atomisp_shading_table *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:741:21:     got struct atomisp_shading_table [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:747:21:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:747:21:     expected struct atomisp_morph_table *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:747:21:     got struct atomisp_morph_table [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:753:21:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:753:21:     expected struct atomisp_dis_coefficients *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:753:21:     got struct atomisp_dis_coefficients [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:760:14:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:760:14:     expected struct atomisp_dvs_6axis_config *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:760:14:     got struct atomisp_dvs_6axis_config [noderef] __user *
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:817:13:  warning: incorrect type in assignment (different address spaces)
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:817:13:     expected struct atomisp_sensor_ae_bracketing_lut_entry *__pu_val
    drivers/staging/media/atomisp/pci/atomisp_compat_ioctl32.c:817:13:     got void [noderef] __user *

Use the same strategies used at v4l2-compat32.c, in order to
solve them and avoid warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:
	drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Instead of calling printk(), use pr_foo() macros.

While here, do some cleanup at the printed messages, as some
has __func__, while others have the module name (sometimes
spelled as "ttusb_dvb").
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:311 ttusb_boot_dsp() error: doing dma on the stack (b)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:321 ttusb_boot_dsp() error: doing dma on the stack (b)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:330 ttusb_boot_dsp() error: doing dma on the stack (b)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:351 ttusb_set_channel() error: doing dma on the stack (b)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:361 ttusb_del_channel() error: doing dma on the stack (b)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:412 ttusb_init_controller() error: doing dma on the stack (b0)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:416 ttusb_init_controller() error: doing dma on the stack (b1)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:422 ttusb_init_controller() error: doing dma on the stack (b2)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:425 ttusb_init_controller() error: doing dma on the stack (b3)
    drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:430 ttusb_init_controller() error: doing dma on the stack (get_version)

This driver still uses the USB stack for DMA transfers,
which is broken for a long time. I almost dropped this driver,
as there's a high chance that nobody is using it with upstream
Kernels, as we didn't receive any bug reports.

As fixing this won't be hard, I ended opting to fix.

While here, I dropped an ugly hack that implemented read via
a separate function that was just doing a memcpy().

It should be noticed that, during the init phase, there's
a "b4" register that were never initialized, as its buffer
were used just to store the results of "b3" initialization.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

	drivers/media/pci/saa7134/saa7134-alsa.c:267 saa7134_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type?

the number of patches should be unsigned long.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

	drivers/media/pci/cx88/cx88-alsa.c:286 cx88_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type?

the number of patches should be unsigned long.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

	drivers/media//pci/cx23885/cx23885-alsa.c:83 cx23885_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type?

the number of patches should be unsigned long.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

	drivers/media/pci/cx25821/cx25821-alsa.c:146 cx25821_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type?

the number of patches should be unsigned long.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:

	drivers/media/v4l2-core/videobuf-dma-sg.c:245 videobuf_dma_init_kernel() warn: should 'nr_pages << 12' be a 64 bit type?

The printk should not be using %d for the number of pages.

After looking better, the real problem here is that the
number of pages should be long int.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As warned by smatch:
	drivers/media/rc/serial_ir.c:550 serial_ir_probe() warn: should '8 << ioshift' be a 64 bit type?

the "8" constant should be unsigned long.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The usage of castings and float point when checking for
the setup based at the symbol_rate cause those warnings
with smatch:

	drivers/media/dvb-frontends/tda10021.c:153 tda10021_set_symbolrate() warn: unsigned 'symbolrate' is never less than zero.
	drivers/media/dvb-frontends/tda10021.c:155 tda10021_set_symbolrate() warn: unsigned 'symbolrate' is never less than zero.
	drivers/media/dvb-frontends/tda10021.c:157 tda10021_set_symbolrate() warn: unsigned 'symbolrate' is never less than zero.
	drivers/media/dvb-frontends/tda10021.c:159 tda10021_set_symbolrate() warn: unsigned 'symbolrate' is never less than zero.

While the code should work with gcc, as it will evaluate the
values into a constant before compiling, other compilers
could do otherwise. So, get rid of float pointing math on it,
avoiding the need of doing typecasts.

While here, cleanup some coding style issues at the related
code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sparse warns about this symbol:

	drivers/media/platform/qcom/venus/hfi_venus.c:133:5:  warning: symbol 'venus_fw_debug' was not declared. Should it be static?

Because hfi_venus.c doesn't include a header file with the
extern. So, move it to core.h, with is included by both
hfi_venus.c and dbgfs.c.

This way, if something changes with it, warnings or errors
will be produced.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As reported by smatch:
	drivers/media/radio/wl128x/fmdrv_common.c:736 fm_irq_handle_rdsdata_getcmd_resp() warn: potential spectre issue 'rds_fmt.data.groupdatabuff.buff>

Address it by using array_index_nospec().

While here, reorder the linux/ includes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While smatch reports an issue there:

	drivers/media/pci/ttpci/av7110_v4l.c:163 ves1820_set_tv_freq() warn: unsigned 'freq' is never less than zero.
	drivers/media/pci/ttpci/av7110_v4l.c:165 ves1820_set_tv_freq() warn: unsigned 'freq' is never less than zero.

The logic is actually fine. Yet, removing the typecast
shuts up smatch and makes the code more readable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As pointed by smatch:

	drivers/media/tuners/qt1010.c:239 qt1010_init_meas1() error: uninitialized symbol 'val2'.
	drivers/media/tuners/qt1010.c:273 qt1010_init_meas2() error: uninitialized symbol 'val'.

The logic is ok, but it is hard for static analyzers
to parse it, as it depends on a value read in the middle
of a loop.

Also, it takes a while for humans to verify.

Re-write the first function to use a more direct way.

At the second one, I opted to just initialize the read var,
in order to shut up the report.

While here, address a few coding style issues at the
function code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The original logic had an integer to unsigned integer
conversion, plus a float-point math. While gcc should be
able to do the match at compile time, other compilers might
not do the same. Also, those produce the following warnings
with static code analyzers:

	drivers/media/dvb-frontends/tda10086.c:300 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:303 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:306 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:309 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:312 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:315 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:318 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:321 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:324 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.
	drivers/media/dvb-frontends/tda10086.c:327 tda10086_set_symbol_rate() warn: unsigned 'symbol_rate' is never less than zero.

Change the logic to declare the reference constant as unsigned
and to not use float point math.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Upon running Sparse, "warning: dubious: !x | !y" is brought to notice
for this file.  Logical and bitwise OR are basically the same in this
context, so it doesn't cause a runtime bug.  But let's change it to
logical OR to make it a little bit cleaner and silence the Sparse
warning.
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When aspect_ratio_crop_init() fails, curr_stream needs
to be freed just like what we've done in the following
error paths. However, current code is returning directly
and ends up leaking memory.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are spelling mistakes in some dev_err messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

`find_gmin_subdev()` that returns a pointer to `struct
gmin_subdev` can return NULL.

In `gmin_v2p8_ctrl()` there's a call to this function but the
possibility of a NULL was not checked before its being dereferenced,
i.e.:

  /* Acquired here --------v */
  struct gmin_subdev *gs = find_gmin_subdev(subdev);

  /*  v------Dereferenced here */
  if (gs->v2p8_gpio >= 0) {
      ...
  }

With this change we're null checking `find_gmin_subdev()` result
and we return an error if that's the case. We also WARN()
for the sake of debugging.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Reported-by: Coverity Static Analyzer CID 1465536
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are a couple of debug messages using hardcoded function names
instead of the preferred __func__ magic constant.

Replace them:

WARNING: Prefer using '"%s...", __func__' to using 'misensor_rmw_reg', this function's name, in a string
215: FILE: ./media/atomisp/i2c/atomisp-mt9m114.c:215:
+       v4l2_err(client, "misensor_rmw_reg error exit, read failed\n");

WARNING: Prefer using '"%s...", __func__' to using 'misensor_rmw_reg', this function's name, in a string
236: FILE: ./media/atomisp/i2c/atomisp-mt9m114.c:236:
+       v4l2_err(client, "misensor_rmw_reg error exit, write failed\n");
Signed-off-by: Juan Antonio Aldea-Armenteros <juant.aldea@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix warnings and errors generated after running checkpatch.pl on pci/sh_css_firmware.c.
Signed-off-by: Rohit K Bharadwaj <bharadwaj.rohit8@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Replace deprecated MSI IRQ enabler and disabler
with pci_alloc_irq_vectors and pci_free_irq_vectors respectively.
And as a result handle the returned error as appropriate.
Compile tested.

[mchehab: solved a merge conflict that renamed dev->pdev]
Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are several bad whitespacing usage there. Remove them.

While here, place all Kconfig options for sensors at the
same place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Removed braces in 'if else' condition as it only consists of
one line each and according to coding style rules , in this case
the braces are not required.
Signed-off-by: Ankit Baluni <b18007@students.iitmandi.ac.in>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fix braces placement errors as reported by checkpatch.pl
Signed-off-by: Aditya Jain <aditya.jainadityajain.jain@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Removed braces for a 'if' condition as it contain only single line &
there is no need for braces for such case according to coding style
rules.
Signed-off-by: Ankit Baluni <b18007@students.iitmandi.ac.in>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This fixes some coding style issues of multiline comments to
correct a few checkpatch.pl warnings.
Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This removes whitespaces at the beginning of a few lines to fix
some checkpatch.pl warnings.
Signed-off-by: Rahul Gottipati <rahul.blr97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When we added support for omap3, back in 2010, we added a new
type of V4L2 devices that aren't fully controlled via the V4L2
device node.

Yet, we have never clearly documented in the V4L2 specification
the differences between the two types.

Let's document them based on the the current implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add a glossary of terms used within the media userspace API
documentation, as several concepts are complex enough to cause
misunderstandings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

minor numbers use to range between 0 to 255, but that
was changed a long time ago. While it still applies when
CONFIG_VIDEO_FIXED_MINOR_RANGES, when the minor number is
dynamically allocated, this may not be true. In any case,
this is not relevant, as udev will take care of it.

So, remove this useless misinformation.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, only kAPI documentation describes the device naming.
However, such description is needed at the uAPI too. Add it,
and describe how to get an unique identifier for a given device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some files that are dual licensed GPL and GFDL.

As SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:

	https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html

Let's remove the dual license text, replacing them by:

	SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some files that are dual licensed GPL and GFDL.

As SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:

	https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html

Let's remove the dual license text, replacing them by:

	SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:

	https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html

So, remove the license text, replacing them by this new SPDX license.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

SPDX v3.10 gained support for GFDL-1.1 with no invariant sections:

	https://spdx.org/licenses/GFDL-1.1-no-invariants-or-later.html

So, remove the license text, replacing them by this new SPDX
license.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>