- 26 Jan, 2012 3 commits
-
-
Ben Widawsky authored
This is only relevant when using module unloading, and really only helps get rid of a probably benign warning. I can't remember if I sent this out already, but it's not turning up in any of my searches. Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by:
Keith Packard <keithp@keithp.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
After the ILK vt-d workaround patches it became clear that we had introduced a bug. Chris Wilson tracked down the issue to recursive calls to unmap. This happens because we try to optimize waiting on requests by calling retire requests after the wait, which may drop the last reference on an object and end up freeing the object (and then unmap the object from the gtt). After the last patch we can now choose to defer processing the retire list. Kudos to Chris Wilson for tracking this one down. This patch fixes gem_unref_active_buffers from i-g-t. It was tested by forcing do_idle_maps to true. This also fixes tests/gem_linear_blits in intel-gpu-tools. Reported-by: guang.a.yang@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180Reviewed-by:
-
Ben Widawsky authored
Sometimes it may be the case when we idle the gpu or wait on something we don't actually want to process the retiring list. This patch allows callers to choose the behavior. Reviewed-by:
Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by:
-
- 25 Jan, 2012 2 commits
-
-
Eric Anholt authored
Older specs claimed this was bit 11, but newer specs and the actual simulator code say it was bit 12. Regardless, we don't use MI_FLUSH, or try to enable it any more. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
-
Eric Anholt authored
We have always been using the wrong bit -- it's bit 12. However, the bit also doesn't do anything -- hardware has always accepted the MI_FLUSH command even when it was specced not to. Given that there is only one MI_FLUSH emitted in all of the driver stack on gen6+ (in i965_video.c of the 2d driver, and it should be using other code to do its flush instead), just remove the MI_FLUSH enable instead of trying to fix it. Signed-off-by:
-
- 24 Jan, 2012 1 commit
-
-
Daniel Vetter authored
This was completely spamming dmesg on my i855gm. This issue was just shortly introduced with: commit 931872fc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jan 16 23:01:13 2012 +0000 drm/i915: Check that plane/pipe is disabled before removing the fb Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by:
-
- 21 Jan, 2012 3 commits
-
-
Eugeni Dodonov authored
Otherwise, we are left with pretty bogus message saying that the pixel format is not supported while leaving the details to the telepatic powers. v2: use DRM_DEBUG_KMS instead of DRM_ERROR Signed-off-by:
-
Jesse Barnes authored
Now that we're using the sprite WM fields, we need to take care not to clobber them in the main update_wm functions. While we're at it, make sure we mask out the old sprite wm value before or'ing in the new one when the sprite wm is updated. Signed-off-by:
-
Daniel Vetter authored
I've reviewed gen2 pageflip code to hunt down multiple prepare pageflip issues. The only thing I've found is a slight but functionally meaningless confusion about the length of the mi cmd. Fix it up and add a comment about what this dword should be (according to docs at least). Reviewed-by:
-
- 17 Jan, 2012 16 commits
-
-
Eugeni Dodonov authored
LLC is not SNB/IVB-specific, so we should check for it in a more generic way. Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
Some decent history digging indicates that this was to be used for the GLX_MESA_allocate_memory extension but never actually implemented for any released i915 userspace code. So just rip it out. v2: Fixup the Makefile. Acked-by:
Dave Airlie <airlied@gmail.com> Cc: Keith Whitwell <keithw@vmware.com> Reviewed-by:
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Adam Jackson authored
This is paranoid, but I am entirely willing to believe the hardware could come up with a condition where I get a status with both the 'done' and 'receive error' bits set. Signed-off-by:
Adam Jackson <ajax@redhat.com> Acked-by:
-
Adam Jackson authored
The default in the Sandybridge docs is 5, as on Ironlake, and I have no reason to believe 3 would work any better. Signed-off-by:
-
Adam Jackson authored
Matches the advice in the Sandybridge documentation. Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Simon Que authored
There is an error in i915_read_blc_pwm_ctl, where the register values are not being copied correctly. BLC_PWM_CTL and BLC_PWM_CTL2 are getting mixed up. This patch fixes that so that saveBLC_PWM_CTL2 and not saveBLC_PWM_CTL is copied to the BLC_PWM_CTL2 register. Signed-off-by:
Simon Que <sque@chromium.org> Signed-off-by:
-
Chris Wilson authored
Staring at an error state such as: PGTBL_ER: 0x00000400 Display B: Invalid tiling fence[0] = 05001001 valid, x-tiled, pitch: 512, start: 0x05000000, size: 1048576 Pinned [2]: 00000000 131072 0001 0001 00000000 P uncached 00020000 4096000 0041 0000 00000000 P uncached (name: 1) Plane [1]: CNTR: c0000000 # enabled | gamma STRIDE: 00001400 SIZE: 03ff04ff POS: 00000000 ADDR: 05000000 Suggests that we did not clear the DSPBCNTR prior to unpinning the framebuffer and reusing the GTT space. Impossible! Unless our DPMS bookkeeping ran afoul again... In the meantime add an assertion that the plane is decoupled from the framebuffer prior to release. Signed-off-by: -
Eugeni Dodonov authored
Fix function name in comments, a left-over from when i965_reset was renamed to i915_reset. Signed-off-by:
-
Jesse Barnes authored
This cleans up the mode set path a little further, making it easier to extend for future platforms. Signed-off-by:
-
Jesse Barnes authored
Makes the mode set routine a little cleaner and easier to extend. Signed-off-by:
-
Ben Widawsky authored
This is needed to run the simulator. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Eugeni Dodonov authored
After checking the specs and discussing with Jesse, turns out CxSR is not available on Ironlake and gen5, and its advertisement on the device description is misleading. Acked-by:
-
- 16 Jan, 2012 2 commits
-
-
Sean Paul authored
This patch enforces that the downclock clock source is the same as the preferred clock source for LVDS. This fixes a bug where the driver chooses a downclock clock source with a different P than the preferred mode clock source. This happened even if the preferred clock source implemented an acceptable rate for the downclock. The result of this bug is that downclock is disabled. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Adam Jackson authored
<@ajax> mjg59: how concerned should i be about [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions ? <@mjg59> ajax: Entirely unconcerned Signed-off-by:
-
- 10 Jan, 2012 3 commits
-
-
Dave Airlie authored
Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dan Carpenter authored
Add a cast here to silence a Gcc warning. drivers/gpu/drm/gma500/mid_bios.c:214:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Dan Carpenter authored
The "if (!p && !p->dev)" condition isn't right because || was intended instead of &&. But actually, "p" is the list cursor and so it's always non-NULL and we can just remove that bit. We can remove the another similar check as well. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
- 09 Jan, 2012 5 commits
-
-
Dan Carpenter authored
The second lock should be an unlock or it causes a deadlock. Signed-off-by:
-
Dan Carpenter authored
"bo_va" is dereferenced in the error message. Signed-off-by:
-
Daniel Vetter authored
Fallout from my "kill drm_sman" refactor. Unfortunately gcc seems to have failed me and not warned about this. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> (on via) Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <deathsimple@vodafone.de> Signed-off-by:
-
Alex Deucher authored
Add a VM manager enabled field and use it to check if vm is enabled. Signed-off-by:
-
- 06 Jan, 2012 5 commits
-
-
Dave Airlie authored
So we have a few places where the drm drivers would like to sleep to be nice to the system, mainly in the modesetting paths, but we also have two cases were atomic modesetting must take place, panic writing and kernel debugger. So provide a central inline to determine if a sleep or delay should be used and use this in the intel and radeon drivers. v2: drop intel_drv.h MSLEEP macro, nobody uses it. Based on patch from Michel Dänzer <michel.daenzer@amd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43941Reviewed-by:
-
Michel Dänzer authored
It would previously write basically random bits to PCI configuration space... Not very surprising that the GPU tended to stop responding completely. The resulting MCE even froze the whole machine sometimes. Now resetting the GPU after a lockup has at least a fighting chance of succeeding. Cc: stable@vger.kernel.org Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Jerome Glisse authored
ttm tt rework modified the way we allocate and populate the ttm_tt structure, the AGP side was missing some bit to properly work. Fix those and fix radeon and nouveau AGP support. Tested on radeon only so far. Signed-off-by:
-
Tormod Volden authored
Signed-off-by:
Tormod Volden <debian.tormod@gmail.com> Reviewed-by:
Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and don't try to free freed pages. The code to figure out how many pages to shrink the pool ends up capping the 'count' at _manager->options.max_size - which is OK. Except that the 'count' is also used when accounting for how many pages are recycled - which we end up with the invalid values. This fixes it by using a different value for the amount of pages to shrink. On top of that we would free the cached page pool - which is nonsense as they are deleted from the pool - so there are no free pages in that pool.. Also we also missed the opportunity to batch the amount of pages to free (similar to how ttm_page_alloc.c does it). This reintroduces the code that was lost during rebasing. Reviewed-by:
-
