- 09 Aug, 2016 39 commits
-
-
Thomas Petazzoni authored
The mv_cesa_ahash_cache_req() function always returns 0, which makes its return value pretty much useless. However, in addition to returning a useless value, it also returns a boolean in a variable passed by reference to indicate if the request was already cached. So, this commit changes mv_cesa_ahash_cache_req() to return this boolean. It consequently simplifies the only call site of mv_cesa_ahash_cache_req(), where the "ret" variable is no longer needed. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Thomas Petazzoni authored
The mv_cesa_ahash_init() function always returns 0, and the return value is anyway never checked. Turn it into a function returning void. Signed-off-by:
-
Thomas Petazzoni authored
The dma_iter parameter of mv_cesa_ahash_dma_add_cache() is never used, so get rid of it. Signed-off-by:
-
Thomas Petazzoni authored
The mv_cesa_dma_add_op() function builds a mv_cesa_tdma_desc structure to copy the operation description to the SRAM, but doesn't explicitly initialize the destination of the copy. It works fine because the operatin description must be copied at the beginning of the SRAM, and the mv_cesa_tdma_desc structure is initialized to zero when allocated. However, it is somewhat confusing to not have a destination defined. Signed-off-by:
-
Russell King authored
While debugging setkey issues, the following warnings were found while trying to reinsert the caam module. Fix this by avoiding the duplicated cleanup in the probe path after caam_remove(), which has already cleaned up the resources. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/mm/vmalloc.c:1490 __vunmap+0xcc/0xf4 Trying to vfree() nonexistent vm area (f2400000) Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e734>] (warn_slowpath_fmt+0x40/0x48) [<c002e6f8>] (warn_slowpath_fmt) from [<c0151708>] (__vunmap+0xcc/0xf4) [<c015163c>] (__vunmap) from [<c015177c>] (vunmap+0x4c/0x54) [<c0151730>] (vunmap) from [<c001f48c>] (__iounmap+0x2c/0x30) [<c001f460>] (__iounmap) from [<c001f118>] (iounmap+0x1c/0x20) [<c001f0fc>] (iounmap) from [<bf247ae4>] (caam_probe+0x3dc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1786 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:594 clk_core_disable+0xe4/0x26c Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b113c>] (clk_core_disable+0xe4/0x26c) [<c05b1058>] (clk_core_disable) from [<c05b2e3c>] (clk_core_disable_lock+0x20/0x2c) [<c05b2e1c>] (clk_core_disable_lock) from [<c05b2e6c>] (clk_disable+0x24/0x28) [<c05b2e48>] (clk_disable) from [<bf247b04>] (caam_probe+0x3fc/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1787 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:476 clk_core_unprepare+0x204/0x388 Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam] CPU: 0 PID: 2346 Comm: modprobe Tainted: G W 4.8.0-rc1+ #2014 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c) [<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc) [<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108) [<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30) [<c002e67c>] (warn_slowpath_null) from [<c05b0834>] (clk_core_unprepare+0x204/0x388) [<c05b0630>] (clk_core_unprepare) from [<c05b4c0c>] (clk_unprepare+0x2c/0x34) [<c05b4be0>] (clk_unprepare) from [<bf247b0c>] (caam_probe+0x404/0x1498 [caam]) [<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8) [<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8) [<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810 [<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90) [<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28) [<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200) [<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc) [<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c) [<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam]) [<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178) [<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8) [<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0) [<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0) [<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 34e3370d88bb1788 ]--- Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
Threaded interrupts can perform the function of the tasklet, and much more safely too - without races when trying to take the tasklet and interrupt down on device removal. With the old code, there is a window where we call tasklet_kill(). If the interrupt handler happens to be running on a different CPU, and subsequently calls tasklet_schedule(), the tasklet will be re-scheduled for execution. Switching to a hardirq/threadirq combination implementation avoids this, and it also means generic code deals with the teardown sequencing of the threaded and non-threaded parts. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
Add a helper to map the source scatterlist into the descriptor. Signed-off-by:
-
Russell King authored
Signed-off-by:
-
Russell King authored
Add a helper function to perform the descriptor allocation. Signed-off-by:
-
Russell King authored
Strictly, dma_map_sg() may coalesce SG entries, but in practise on iMX hardware, this will never happen. However, dma_map_sg() can fail, and we completely fail to check its return value. So, fix this properly. Arrange the code to map the scatterlist early, so we know how many scatter table entries to allocate, and then fill them in. This allows us to keep relatively simple error cleanup paths. Signed-off-by:
-
Russell King authored
Ensure that we clean up allocations and DMA mappings after encountering an error rather than just giving up and leaking memory and resources. Signed-off-by:
-
Russell King authored
Since the extended descriptor includes the hardware descriptor, and the sec4 scatterlist immediately follows this, we can declare it as a array at the very end of the extended descriptor. This allows us to get rid of an initialiser for every site where we allocate an extended descriptor. Signed-off-by:
-
Russell King authored
Mark the hardware descriptor as being cache line aligned; on DMA incoherent architectures, the hardware descriptor should sit in a separate cache line from the CPU accessed data to avoid polluting the caches. Signed-off-by:
-
Russell King authored
Rather than giving the descriptor as hw_desc[0], give it's real size. All places where we allocate an ahash_edesc incorporate DESC_JOB_IO_LEN bytes of job descriptor. Signed-off-by:
-
Russell King authored
Signed-off-by:
-
Russell King authored
caamhash contains this weird code: src_nents = sg_count(req->src, req->nbytes); dma_map_sg(jrdev, req->src, src_nents ? : 1, DMA_TO_DEVICE); ... edesc->src_nents = src_nents; sg_count() returns zero when sg_nents_for_len() returns zero or one. This means we don't need to use a hardware scatterlist. However, setting src_nents to zero causes problems when we unmap: if (edesc->src_nents) dma_unmap_sg_chained(dev, req->src, edesc->src_nents, DMA_TO_DEVICE, edesc->chained); as zero here means that we have no entries to unmap. This causes us to leak DMA mappings, where we map one scatterlist entry and then fail to unmap it. This can be fixed in two ways: either by writing the number of entries that were requested of dma_map_sg(), or by reworking the "no SG required" case. We adopt the re-work solution here - we replace sg_count() with sg_nents_for_len(), so src_nents now contains the real number of scatterlist entries, and we then change the test for using the hardware scatterlist to src_nents > 1 rather than just non-zero. This change passes my sshd, openssl tests hashing /bin and tcrypt tests. Signed-off-by:
-
Will Thomas authored
Properly allocate enough memory to respect the fallback. Signed-off-by:
Will Thomas <will.thomas@imgtec.com> Signed-off-by:
-
James Hartley authored
Currently the probe function only emits an output on success when debug is specifically enabled. It would be more useful if this happens by default. Signed-off-by:
James Hartley <james.hartley@imgtec.com> Reviewed-by:
-
James Hartley authored
Currently the img-hash accelerator does not probe successfully due to a change in the checks made during registration with the crypto framework. This is due to import and export functions not being defined. Correct this. Signed-off-by:
-
Govindraj Raja authored
Current img hash claims sys and periph gate clocks and this can be gated in system suspend scenarios. Add support for Device pm ops for img hash to gate the clocks claimed by img hash. Signed-off-by:
Govindraj Raja <Govindraj.Raja@imgtec.com> Reviewed-by:
-
Will Thomas authored
Burst length of 16 drives the hash accelerator out of spec and causes stability issues in some cases. Reduce this to stop data being lost. Signed-off-by:
-
Will Thomas authored
Move 0 length buffer to end of structure to stop overwriting fallback request data. This doesn't cause a bug itself as the buffer is never used alongside the fallback but should be changed. Signed-off-by:
-
Will Thomas authored
Sporadic null pointer exceptions came from here. Fix them. Signed-off-by:
-
Yanjiang Jin authored
"if (!ret == template[i].fail)" is confusing to compilers (gcc5): crypto/testmgr.c: In function '__test_aead': crypto/testmgr.c:531:12: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!ret == template[i].fail) { ^ Let there be 'if (template[i].fail == !ret) '. Signed-off-by:Yanjiang Jin <yanjiang.jin@windriver.com> Signed-off-by:
-
Gary R Hook authored
A second CCP is available, identical to the first, with its ownn PCI ID. Make it available for use by the crypto subsystem, as well as for DMA activity and random number generation. This device is not pre-configured at at boot time. The driver must configure it (during the probe) for use. Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Gary R Hook authored
Every CCP is capable of providing general DMA services. Register the device as a provider. Signed-off-by:
-
Gary R Hook authored
Signed-off-by:
-
Gary R Hook authored
Enable equivalent function on a v5 CCP. Add support for a version 5 CCP which enables AES/XTS/SHA services. Also, more work on the data structures to virtualize functionality. Signed-off-by:
-
Gary R Hook authored
Available queue space is used to decide (by counting free slots) if we have to put a command on hold or if it can be sent to the engine immediately. Signed-off-by:
-
Gary R Hook authored
Make the RNG support code common (where possible) in preparation for adding a v5 device. Signed-off-by:
-
Gary R Hook authored
Move the KSB access/management functions to the v3 device file, and add function pointers to the actions structure. At the operations layer all of the references to the storage block will be generic (virtual). This is in preparation for a version 5 device, in which the private storage block is managed differently. Signed-off-by:
-
Gary R Hook authored
Form and use of the local storage block in the CCP is particular to the device version. Much of the code that accesses the storage block can treat it as a virtual resource, and will under go some renaming. Device-specific access to the memory will be moved into device file. Service functions will be added to the actions structure. Signed-off-by:
-
Gary R Hook authored
Use more concise field names; "perform_" is too verbose. Signed-off-by:
-
Gary R Hook authored
Device-specific values for the BAR and offset should be found in the version data structure. Signed-off-by:
-
Gary R Hook authored
Adhere to the cryptodev comment convention. Signed-off-by:
-
Quentin Lambert authored
Most error branches following the call to npe_request contain a call to npe_request. This patch add a call to npe_release to error branches following the call to npe_request that do not have it. This issue was found with Hector. Signed-off-by:
Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by:
-
Quentin Lambert authored
Signed-off-by:
-
Russell King authored
Since 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)"), the AF_ALG interface requires userspace to provide a key to any algorithm that has a setkey method. However, the non-HMAC algorithms are not keyed, so setting a key is unnecessary. Fix this by removing the setkey method from the non-keyed hash algorithms. Fixes: 6de62f15 ("crypto: algif_hash - Require setkey before accept(2)") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Michael Ellerman authored
The optimised crc32c implementation depends on VMX (aka. Altivec) instructions, so the kernel must be built with Altivec support in order for the crc32c code to build. Fixes: 6dd7a82c ("crypto: powerpc - Add POWER8 optimised crc32c") Acked-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 08 Aug, 2016 1 commit
-
-
Horia Geantă authored
To be able to generate shared descriptors for AEAD, the authentication size needs to be known. However, there is no imposed order of calling .setkey, .setauthsize callbacks. Thus, in case authentication size is not known at .setkey time, defer it until .setauthsize is called. The authsize != 0 check was incorrectly removed when converting the driver to the new AEAD interface. Cc: <stable@vger.kernel.org> # 4.3+ Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
