- 29 May, 2017 2 commits
-
-
Chen-Yu Tsai authored
The ACIN pins of the AXP209 PMIC on the Cubieboard 2 are tied to the DC jack on the board. Enable the ACIN power supply. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Chen-Yu Tsai authored
We want to keep node references in alphabetical order, except for instances where node must be #included first. Move the usb_otg node reference so that all references to non-AXP209 device nodes are in alphabetical order. Signed-off-by:
-
- 22 May, 2017 5 commits
-
-
Chen-Yu Tsai authored
The Cubietruck Plus has an optical SPDIF out connector. Enable SPDIF audio output for this board. Signed-off-by:
-
Chen-Yu Tsai authored
The Cubietruck Plus has 4 LEDs in different colors. Add device nodes for them. Signed-off-by:
-
Chen-Yu Tsai authored
The A83T SoC has an SPDIF transmitter block. According to the vendor BSP kernel, it is compatible with the one found on the H3 SoC. Add a device node and pinmux setting for it. Signed-off-by:
-
Chen-Yu Tsai authored
The A83T SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by:
-
Fabio Estevam authored
"bcrmf" is a typo and "wifi" is the preferred form to describe such node, so change it accordingly. Reported-by:
Andreas Färber <afaerber@suse.de> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
- 19 May, 2017 4 commits
-
-
Chen-Yu Tsai authored
The datasheets for Allwinner SoCs set strict requirements on the stability of the external crystal oscillators. Add the accuracy for the main 24MHz oscillator to the device tree. Signed-off-by:
-
Chen-Yu Tsai authored
Now that we have support for the A83T CCU, add a device node for it, and replace any existing placeholder clock phandles with the correct ones. Signed-off-by:
-
Maxime Ripard authored
The A10s Olinuxino has an HDMI connector. Make sure we can use it. Acked-by:
-
Maxime Ripard authored
The A10s has an HDMI controller connected to the second TCON channel. Add it to our DT. Since the TV Encoder was the only channel 1 user so far, also add the property now that we have several users. Signed-off-by:
-
- 18 May, 2017 2 commits
-
-
Icenowy Zheng authored
Allwinner V3s SoC has a SPI controller, muxed with the MMC2 controller at PC bank. The controller itself is identical to the one in H3 SoC. Add device tree node and the only pinmux node for it. Tested with a Winbond W25Q128FV SPI NOR soldered on the Lichee Pi early sample. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Icenowy Zheng authored
The Lichee Pi Zero board has a "dock board" which needs to be soldered with the 1.27mm stamp holes on a Lichee Pi Zero board. It features: - Onboard MIC and headphone jack (not supported yet) - Ethernet port (not supported yet) - An extra MicroSD slot connected to MMC1 controller - four keys connected to the LRADC. As it needs to be soldered with the main board to use, add a stand-alone device tree for it. Signed-off-by:
-
- 15 May, 2017 3 commits
-
-
Icenowy Zheng authored
The dock board of Lichee Pi Zero features a MicroSD slot on MMC1, which can be used with a MicroSD card or the MicroSD-slot Wi-Fi card provided by Lichee Pi Zero. Add pinmux for the mmc1 controller, and specify it in the mmc1 device node as it's the only pinmux for mmc1. Signed-off-by:
-
Icenowy Zheng authored
Allwinner V3s features a LRADC like the ones in older SoCs. Add a device tree node for it. Signed-off-by:
-
Icenowy Zheng authored
All the used CCU definitions are stripped from the V3s DTSI file when it's merged, as the DTSI file and the CCU device tree binding headers went to different trees. As they're all in Linus's tree now, restore the usage of the definitions. Signed-off-by:
-
- 14 May, 2017 17 commits
-
-
Oleksij Rempel authored
This names the GPIO lines on the Banana Pi board in accordance with the A20_Banana_Pi v1.4 Specification. This will make these line names reflect through to user space so that they can easily be identified and used with the new character device ABI. Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Marcus Cooper authored
The Orange Pi 2 routes the LINEOUT pins through a SGM8900 PA which needs to be enabled. The onboard microphone is routed to MIC1, with MBIAS providing power. Signed-off-by:
Marcus Cooper <codekipper@gmail.com> Signed-off-by:
-
Chen-Yu Tsai authored
We should use hyphens and not underscores in device node names. Replace the ones that were just added. Signed-off-by:
-
Chen-Yu Tsai authored
Kbuild now complains about leading zeroes in the address portion of device node names. Get rid of them all, except for the uart device node. U-boot currently hard codes the device node path. We can remove the leading zero for the uart once we teach U-boot to use the aliases or stdout-path property. Signed-off-by:
-
Chen-Yu Tsai authored
tcon0 contains a muxing register used to mux tcon output to downstream hdmi or mipi dsi encoders. tcon0 must be available for the mux to be configured. Whether the display subsystem is enabled or not is now solely controlled by the display-engine node. Signed-off-by:
-
Chen-Yu Tsai authored
The Allwinner A31/A31s SoCs have 2 display pipelines, as in 2 display frontends, backends, and tcons each. The relationship between the backends and tcons are 1:1, but the frontends can feed either backend. Add device nodes and of graph nodes describing this relationship. Signed-off-by:
-
Quentin Schulz authored
The NextThing Co. CHIP has an AXP209 PMIC with battery connector. This enables the battery power supply subnode. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by:
-
Quentin Schulz authored
The Sinlinx SinA33 has an AXP223 PMIC and a battery connector, thus, we enable the battery power supply subnode in its Device Tree. Signed-off-by:
-
Quentin Schulz authored
The X-Powers AXP22X PMIC exposes battery supply various data such as the battery status (charging, discharging, full, dead), current max limit, current current, battery capacity (in percentage), voltage max limit, current voltage, and battery capacity (in Ah). This adds the battery power supply subnode for AXP22X PMIC. Signed-off-by:
-
Quentin Schulz authored
The X-Powers AXP209 PMIC exposes battery supply various data such as the battery status (charging, discharging, full, dead), current max limit, current current, battery capacity (in percentage), voltage max and min limits, current voltage, and battery capacity (in Ah). This adds the battery power supply subnode for AXP20X PMIC. Signed-off-by:
-
Viresh Kumar authored
Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by:
Krzysztof Kozlowski <krzk@kernel.org> Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
The Bananapi M2 Plus has a USB OTG port that can be used in both powered host mode and peripheral mode. When in peripheral mode, the port does not power the board. There is no VBUS sensing on the port. This patch adds the regulator controlling VBUS on the OTG port, the GPIO for the ID detect pin, and enables the USB OTG and host controllers. Signed-off-by:
-
Chen-Yu Tsai authored
The Orange Pi PC, PC Plus, and Plus 2E all have a USB OTG port that can be used in both powered host mode and peripheral mode. When in peripheral mode, the port does not power the board. There is no VBUS sensing on the port. All three boards have all related pins routed the same way. The device tree file for the Orange Pi Plus 2E is based on the Orange Pi PC Plus, which itself is based on the Orange Pi PC. Changes to the base Orange Pi PC device tree file affects all 3 boards. This patch adds the regulator controlling VBUS on the OTG port, the GPIO for the ID detect pin, and enables the USB OTG and host controllers. Signed-off-by:
-
Chen-Yu Tsai authored
As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the mmc0_cd_pin_reference_design pinmux setting for the default mmc0 card detect GPIO pin. Signed-off-by:
-
Chen-Yu Tsai authored
As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the pinmux settings for the common regulators defined in sunxi-common-regulators.dtsi. Signed-off-by:
-
Chen-Yu Tsai authored
The pinmux setting nodes all have an address element in their node names, however the pinctrl node does not have #address-cells. Rename the existing pinmux setting nodes and labels in sun8i-a83t.dtsi, dropping identifiers for functions that only have one possible setting, and using the pingroup name if the function is identically available on different pingroups. Signed-off-by:
-
Chen-Yu Tsai authored
skeleton.dtsi is deprecated. Remove it from sun8i-a83t.dtsi and add the needed device nodes directly. Also drop an extra, non-style-conforming line in the copyright license header. Signed-off-by:
-
- 13 May, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "No new stuff, just fixes" * 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add missing NR_CPUS include um: Fix to call read_initrd after init_bootmem um: Include kbuild.h instead of duplicating its macros um: Fix PTRACE_POKEUSER on x86_64 um: Set number of CPUs um: Fix _print_addr()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages
-
- 12 May, 2017 2 commits
-
-
Roman Gushchin authored
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.comSigned-off-by:Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
Although there are a ton of free swap and anonymous LRU page in elgible zones, OOM happened. balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null), order=0, oom_score_adj=0 CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x21d/0x3f0 out_of_memory+0xd8/0x390 __alloc_pages_slowpath+0xbc1/0xc50 __alloc_pages_nodemask+0x1a5/0x1c0 pte_alloc_one+0x20/0x50 __pte_alloc+0x1e/0x110 __handle_mm_fault+0x919/0x960 handle_mm_fault+0x77/0x120 __do_page_fault+0x27a/0x550 trace_do_page_fault+0x43/0x150 do_async_page_fault+0x2c/0x90 async_page_fault+0x28/0x30 Mem-Info: active_anon:424716 inactive_anon:65314 isolated_anon:0 active_file:52 inactive_file:46 isolated_file:0 unevictable:0 dirty:27 writeback:0 unstable:0 slab_reclaimable:3967 slab_unreclaimable:4125 mapped:133 shmem:43 pagetables:1674 bounce:0 free:4637 free_pcp:225 free_cma:0 Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 992 992 1952 DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB lowmem_reserve[]: 0 0 0 959 Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB 378 total pagecache pages 17 pages in swap cache Swap cache stats: add 17325, delete 17302, find 0/27 Free swap = 978940kB Total swap = 1048572kB 524157 pages RAM 0 pages HighMem/MovableOnly 12629 pages reserved 0 pages cma reserved 0 pages hwpoisoned [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name [ 433] 0 433 4904 5 14 3 82 0 upstart-udev-br [ 438] 0 438 12371 5 27 3 191 -1000 systemd-udevd With investigation, skipping page of isolate_lru_pages makes reclaim void because it returns zero nr_taken easily so LRU shrinking is effectively nothing and just increases priority aggressively. Finally, OOM happens. The problem is that get_scan_count determines nr_to_scan with eligible zones so although priority drops to zero, it couldn't reclaim any pages if the LRU contains mostly ineligible pages. get_scan_count: size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx); size = size >> sc->priority; Assumes sc->priority is 0 and LRU list is as follows. N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H (Ie, small eligible pages are in the head of LRU but others are almost ineligible pages) In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from tail of the LRU are not eligible pages. If get_scan_count counts skipped pages, it doesn't reclaim any pages remained after scanning 4 pages so it ends up OOM happening. This patch makes isolate_lru_pages try to scan pages until it encounters eligible zones's pages. [akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.orgSigned-off-by:Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
