- 11 Jul, 2019 2 commits
-
-
Heng Xiao authored
In umount, we give an constand time to handle pending discard, previously, in __issue_discard_cmd() we missed to check timeout condition in loop, result in delaying long time, fix it. Signed-off-by:
Heng Xiao <heng.xiao@unisoc.com> [Chao Yu: add commit message] Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Jaegeuk Kim authored
This patch allows users to pin files. Reviewed-by:
-
- 03 Jul, 2019 1 commit
-
-
Jaegeuk Kim authored
Signed-off-by:
-
- 02 Jul, 2019 10 commits
-
-
Jaegeuk Kim authored
This patch allows fallocate to allocate physical blocks for pinned file. Reviewed-by:
-
Sahitya Tummala authored
The discard thread should issue upto dpolicy->max_requests at once and wait for all those discard requests at once it reaches dpolicy->max_requests. It should then sleep for dpolicy->min_interval timeout before issuing the next batch of discard requests. But in the current code of is_idle(), it checks for dcc_info->queued_discard and aborts issuing the discard batch of max_requests. This dcc_info->queued_discard will be true always once one discard command is issued. It is thus resulting into this type of discard request pattern - - Issue discard request#1 - is_idle() returns false, discard thread waits for request#1 and then sleeps for min_interval 50ms. - Issue discard request#2 - is_idle() returns false, discard thread waits for request#2 and then sleeps for min_interval 50ms. - and so on for all other discard requests, assuming f2fs is idle w.r.t other conditions. With this fix, the pattern will look like this - - Issue discard request#1 - Issue discard request#2 and so on upto max_requests of 8 - Issue discard request#8 - wait for min_interval 50ms. Signed-off-by:
Sahitya Tummala <stummala@codeaurora.org> Reviewed-by:
-
Jaegeuk Kim authored
Two paths to update quota and f2fs_lock_op: 1. - lock_op | - quota_update `- unlock_op 2. - quota_update - lock_op `- unlock_op But, we need to make a transaction on quota_update + lock_op in #2 case. So, this patch introduces: 1. lock_op 2. down_write 3. check __need_flush 4. up_write 5. if there is dirty quota entries, flush them 6. otherwise, good to go Signed-off-by: -
Chao Yu authored
If xattr is corrupted, let's print kernel message and set SBI_NEED_FSCK for further repair. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Chao Yu authored
f2fs uses EFAULT as error number to indicate filesystem is corrupted all the time, but generic filesystems use EUCLEAN for such condition, we need to change to follow others. This patch adds two new macros as below to wrap more generic error code macros, and spread them in code. EFSBADCRC EBADMSG /* Bad CRC detected */ EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */ Reported-by:
-
Geert Uytterhoeven authored
Replace the open-coded divisions with round-up by calls to the DIV_ROUND_UP() helper macro. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Chao Yu authored
As Pavel reported, once we detect filesystem inconsistency in f2fs_inplace_write_data(), it will be better to print kernel message as we did in other places. Reported-by:
-
Joe Perches authored
- Add and use f2fs_<level> macros - Convert f2fs_msg to f2fs_printk - Remove level from f2fs_printk and embed the level in the format - Coalesce formats and align multi-line arguments - Remove unnecessary duplicate extern f2fs_msg f2fs.h Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Chao Yu authored
No logic change. Signed-off-by:
-
Qiuyang Sun authored
This ioctl shrinks a given length (aligned to sections) from end of the main area. Any cursegs and valid blocks will be moved out before invalidating the range. This feature can be used for adjusting partition sizes online. History of the patch: Sahitya Tummala: - Add this ioctl for f2fs_compat_ioctl() as well. - Fix debugfs status to reflect the online resize changes. - Fix potential race between online resize path and allocate new data block path or gc path. Others: - Rename some identifiers. - Add some error handling branches. - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range. - Implement this interface as ext4's, and change the parameter from shrunk bytes to new block count of F2FS. - During resizing, force to empty sit_journal and forbid adding new entries to it, in order to avoid invalid segno in journal after resize. - Reduce sbi->user_block_count before resize starts. - Commit the updated superblock first, and then update in-memory metadata only when the former succeeds. - Target block count must align to sections. - Write checkpoint before and after committing the new superblock, w/o CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if resize fails after the new superblock is committed. - In free_segment_range(), reduce granularity of gc_mutex. - Add protection on curseg migration. - Add freeze_bdev() and thaw_bdev() for resize fs. - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation. - Recover super_block and FS metadata when resize fails. - No need to clear CP_FSCK_FLAG in update_ckpt_flags(). - Clean up the sb and fs metadata update functions for resize_fs. Geert Uytterhoeven: - Use div_u64*() for 64-bit divisions Arnd Bergmann: - Not all architectures support get_user() with a 64-bit argument: ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined! Use copy_from_user() here, this will always work. Signed-off-by:Qiuyang Sun <sunqiuyang@huawei.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 21 Jun, 2019 3 commits
-
-
Wang Shilong authored
It doesn't make any sense to have project inherit bits for regular files, even though this won't cause any problem, but it is better fix this. Cc: Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Wang Shilong <wshilong@ddn.com> Reviewed-by:
-
Eric Biggers authored
f2fs copied all the on-disk i_flags from ext4, and along with it the assumption that the on-disk i_flags are the same as the bits used by FS_IOC_GETFLAGS and FS_IOC_SETFLAGS. This is problematic because reserving an on-disk inode flag in either filesystem's i_flags or in these ioctls effectively reserves it in all the other places too. In fact, most of the "f2fs i_flags" are not used by f2fs at all. Fix this by separating f2fs's i_flags from the ioctl bits and ext4's i_flags. In the process, un-reserve all "f2fs i_flags" that aren't actually supported by f2fs. This included various flags that were not settable at all, as well as various flags that were settable by FS_IOC_SETFLAGS but didn't actually do anything. There's a slight chance we'll need to add some flag(s) back to FS_IOC_SETFLAGS in order to avoid breaking users who expect f2fs to accept some random flag(s). But hopefully such users don't exist. Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
-
Kimberly Brown authored
The kobj_type default_attrs field is being replaced by the default_groups field. Replace the default_attrs fields in f2fs_sb_ktype and f2fs_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro to create f2fs_groups and f2fs_feat_groups. Fixes: fef4129e ("f2fs: fix to be aware discard/preflush/dio command in is_idle()") Signed-off-by:
Kimberly Brown <kimbrownkd@gmail.com> Reviewed-by:
-
- 03 Jun, 2019 4 commits
-
-
Daniel Rosenberg authored
This extends the checkpoint option to allow checkpoint=disable:%u[%] This allows you to specify what how much of the disk you are willing to lose access to while mounting with checkpoint=disable. If the amount lost would be higher, the mount will return -EAGAIN. This can be given as a percent of total space, or in blocks. Currently, we need to run garbage collection until the amount of holes is smaller than the OVP space. With the new option, f2fs can mark space as unusable up front instead of requiring garbage collection until the number of holes is small enough. Signed-off-by:
Daniel Rosenberg <drosen@google.com> Reviewed-by:
-
Daniel Rosenberg authored
Fixes possible underflows when dealing with unusable blocks. Signed-off-by:
-
Daniel Rosenberg authored
On a remount, you can currently set root reserved if it was not previously set. This can cause an underflow if reserved has been set to a very high value, since then root reserved + current reserved could be greater than user_block_count. inc_valid_block_count later subtracts out these values from user_block_count, causing an underflow. Signed-off-by:
-
Daniel Rosenberg authored
The existing threshold for allowable holes at checkpoint=disable time is too high. The OVP space contains reserved segments, which are always in the form of free segments. These must be subtracted from the OVP value. The current threshold is meant to be the maximum value of holes of a single type we can have and still guarantee that we can fill the disk without failing to find space for a block of a given type. If the disk is full, ignoring current reserved, which only helps us, the amount of unused blocks is equal to the OVP area. Of that, there are reserved segments, which must be free segments, and the rest of the ovp area, which can come from either free segments or holes. The maximum possible amount of holes is OVP-reserved. Now, consider the disk when mounting with checkpoint=disable. We must be able to fill all available free space with either data or node blocks. When we start with checkpoint=disable, holes are locked to their current type. Say we have H of one type of hole, and H+X of the other. We can fill H of that space with arbitrary typed blocks via SSR. For the remaining H+X blocks, we may not have any of a given block type left at all. For instance, if we were to fill the disk entirely with blocks of the type with fewer holes, the H+X blocks of the opposite type would not be used. If H+X > OVP-reserved, there would be more holes than could possibly exist, and we would have failed to find a suitable block earlier on, leading to a crash in update_sit_entry. If H+X <= OVP-reserved, then the holes end up effectively masked by the OVP region in this case. Signed-off-by:
-
- 30 May, 2019 5 commits
-
-
Chao Yu authored
make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__" CHECK dir.c dir.c:842:50: warning: cast from restricted __le32 CHECK node.c node.c:2759:40: warning: restricted __le32 degrades to integer Signed-off-by:
-
Sahitya Tummala authored
Fix f2fs_show_options to show nodiscard mount option. Signed-off-by:
-
Sahitya Tummala authored
Add error prints to get more details on the mount failure. Signed-off-by:
-
Chao Yu authored
As Jungyeon Reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203233 - Reproduces gcc poc_13.c ./run.sh f2fs - Kernel messages F2FS-fs (sdb): Bitmap was wrongly set, blk:4608 kernel BUG at fs/f2fs/segment.c:2133! RIP: 0010:update_sit_entry+0x35d/0x3e0 Call Trace: f2fs_allocate_data_block+0x16c/0x5a0 do_write_page+0x57/0x100 f2fs_do_write_node_page+0x33/0xa0 __write_node_page+0x270/0x4e0 f2fs_sync_node_pages+0x5df/0x670 f2fs_write_checkpoint+0x364/0x13a0 f2fs_sync_fs+0xa3/0x130 f2fs_do_sync_file+0x1a6/0x810 do_fsync+0x33/0x60 __x64_sys_fsync+0xb/0x10 do_syscall_64+0x43/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The testcase fails because that, in fuzzed image, current segment was allocated with LFS type, its .next_blkoff should point to an unused block address, but actually, its bitmap shows it's not. So during allocation, f2fs crash when setting bitmap. Introducing sanity_check_curseg() to check such inconsistence of current in-used segment. Signed-off-by:
-
Jaegeuk Kim authored
This patch cleans up documentation to cover missing sysfs entries. Reviewed-by:
-
- 23 May, 2019 6 commits
-
-
Chao Yu authored
As Hagbard Celine reported: [ 615.697824] INFO: task kworker/u16:5:344 blocked for more than 120 seconds. [ 615.697825] Not tainted 5.0.15-gentoo-f2fslog #4 [ 615.697826] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 615.697827] kworker/u16:5 D 0 344 2 0x80000000 [ 615.697831] Workqueue: writeback wb_workfn (flush-259:0) [ 615.697832] Call Trace: [ 615.697836] ? __schedule+0x2c5/0x8b0 [ 615.697839] schedule+0x32/0x80 [ 615.697841] schedule_preempt_disabled+0x14/0x20 [ 615.697842] __mutex_lock.isra.8+0x2ba/0x4d0 [ 615.697845] ? log_store+0xf5/0x260 [ 615.697848] f2fs_write_data_pages+0x133/0x320 [ 615.697851] ? trace_hardirqs_on+0x2c/0xe0 [ 615.697854] do_writepages+0x41/0xd0 [ 615.697857] __filemap_fdatawrite_range+0x81/0xb0 [ 615.697859] f2fs_sync_dirty_inodes+0x1dd/0x200 [ 615.697861] f2fs_balance_fs_bg+0x2a7/0x2c0 [ 615.697863] ? up_read+0x5/0x20 [ 615.697865] ? f2fs_do_write_data_page+0x2cb/0x940 [ 615.697867] f2fs_balance_fs+0xe5/0x2c0 [ 615.697869] __write_data_page+0x1c8/0x6e0 [ 615.697873] f2fs_write_cache_pages+0x1e0/0x450 [ 615.697878] f2fs_write_data_pages+0x14b/0x320 [ 615.697880] ? trace_hardirqs_on+0x2c/0xe0 [ 615.697883] do_writepages+0x41/0xd0 [ 615.697885] __filemap_fdatawrite_range+0x81/0xb0 [ 615.697887] f2fs_sync_dirty_inodes+0x1dd/0x200 [ 615.697889] f2fs_balance_fs_bg+0x2a7/0x2c0 [ 615.697891] f2fs_write_node_pages+0x51/0x220 [ 615.697894] do_writepages+0x41/0xd0 [ 615.697897] __writeback_single_inode+0x3d/0x3d0 [ 615.697899] writeback_sb_inodes+0x1e8/0x410 [ 615.697902] __writeback_inodes_wb+0x5d/0xb0 [ 615.697904] wb_writeback+0x28f/0x340 [ 615.697906] ? cpumask_next+0x16/0x20 [ 615.697908] wb_workfn+0x33e/0x420 [ 615.697911] process_one_work+0x1a1/0x3d0 [ 615.697913] worker_thread+0x30/0x380 [ 615.697915] ? process_one_work+0x3d0/0x3d0 [ 615.697916] kthread+0x116/0x130 [ 615.697918] ? kthread_create_worker_on_cpu+0x70/0x70 [ 615.697921] ret_from_fork+0x3a/0x50 There is still deadloop in below condition: d A - do_writepages - f2fs_write_node_pages - f2fs_balance_fs_bg - f2fs_sync_dirty_inodes - f2fs_write_cache_pages - mutex_lock(&sbi->writepages) -- lock once - __write_data_page - f2fs_balance_fs_bg - f2fs_sync_dirty_inodes - f2fs_write_data_pages - mutex_lock(&sbi->writepages) -- lock again Thread A Thread B - do_writepages - f2fs_write_node_pages - f2fs_balance_fs_bg - f2fs_sync_dirty_inodes - .cp_task = current - f2fs_sync_dirty_inodes - .cp_task = current - filemap_fdatawrite - .cp_task = NULL - filemap_fdatawrite - f2fs_write_cache_pages - enter f2fs_balance_fs_bg since .cp_task is NULL - .cp_task = NULL Change as below to avoid this: - add condition to avoid holding .writepages mutex lock in path of data flush - introduce mutex lock sbi.flush_lock to exclude concurrent data flush in background. Signed-off-by: -
Park Ju Hyung authored
This allows more aggressive discards and balancing job to be done under gc_urgent. Signed-off-by:
Park Ju Hyung <qkrwngud825@gmail.com> Reviewed-by:
-
Chao Yu authored
SQLite in Wal mode may trigger sequential IPU write in db-wal file, after commit d1b3e72d ("f2fs: submit bio of in-place-update pages"), we lost the chance of merging page in inner managed bio cache, result in submitting more small-sized IO. So let's add temporary bio in writepages() to cache mergeable write IO as much as possible. Test case: 1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync" 2. xfs_io -f /mnt/f2fs/file -c "pwrite 0 65536" -c "fsync" Before: f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65552, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65560, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65568, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65576, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65584, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65592, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65600, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65608, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65616, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65624, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65632, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65640, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65648, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65656, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65664, size = 4096 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57352, size = 4096 After: f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), DATA, sector = 65544, size = 65536 f2fs_submit_write_bio: dev = (251,0)/(251,0), rw = WRITE(S), NODE, sector = 57368, size = 4096 Signed-off-by:
-
Jaegeuk Kim authored
This patch allows to use ssr during checkpoint is disabled. Reviewed-by:
-
Chao Yu authored
As Ju Hyung reported: " I was semi-forced today to use the new kernel and test f2fs. My Ubuntu initramfs got a bit wonky and I had to boot into live CD and fix some stuffs. The live CD was using 4.15 kernel, and just mounting the f2fs partition there corrupted f2fs and my 4.19(with 5.1-rc1-4.19 f2fs-stable merged) refused to mount with "SIT is corrupted node" message. I used the latest f2fs-tools sent by Chao including "fsck.f2fs: fix to repair cp_loads blocks at correct position" It spit out 140M worth of output, but at least I didn't have to run it twice. Everything returned "Ok" in the 2nd run. The new log is at http://arter97.com/f2fs/final After fixing the image, I used my 4.19 kernel with 5.2-rc1-4.19 f2fs-stable merged and it mounted. But, I got this: [ 1.047791] F2FS-fs (nvme0n1p3): layout of large_nat_bitmap is deprecated, run fsck to repair, chksum_offset: 4092 [ 1.081307] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.161520] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.162418] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7e00 But after doing a reboot, the message is gone: [ 1.098423] F2FS-fs (nvme0n1p3): Found nat_bits in checkpoint [ 1.177771] F2FS-fs (nvme0n1p3): recover fsync data on readonly fs [ 1.178365] F2FS-fs (nvme0n1p3): Mounted with checkpoint version = 761c7eda I'm not exactly sure why the kernel detected that I'm still using the old layout on the first boot. Maybe fsck didn't fix it properly, or the check from the kernel is improper. " Although we have rebuild the old deprecated checkpoint with new layout during repair, we only repair last checkpoint park, the other old one is remained. Once the image was mounted, we will 1) sanity check layout and 2) decide which checkpoint park to use according to cp_ver. So that we will print reported message unnecessarily at step 1), to avoid it, we simply move layout check into f2fs_sanity_check_ckpt() after step 2). Reported-by:
-
Jaegeuk Kim authored
This patch reverts: commit fb40d618 ("f2fs: don't clear CP_QUOTA_NEED_FSCK_FLAG"). We were missing error handlers used in f2fs quota ops. Reviewed-by:
-
- 14 May, 2019 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight updates from Lee Jones: "Fix-ups: - Remove unused BACKLIGHT_LCD_SUPPORT symbol - Remove unused BACKLIGHT_CLASS_DEVICE dependencies - Add DT support to lm3630a_bl Bug Fixes: - Fix error path issues in lm3630a_bl" * tag 'backlight-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: lm3630a: Add firmware node support dt-bindings: backlight: Add lm3630a bindings backlight: lm3630a: Return 0 on success in update_status functions video: lcd: Remove useless BACKLIGHT_CLASS_DEVICE dependencies video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbol
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ... -
Linus Torvalds authored
Merge misc updates from Andrew Morton: - a few misc things and hotfixes - ocfs2 - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (139 commits) kernel/memremap.c: remove the unused device_private_entry_fault() export mm: delete find_get_entries_tag mm/huge_memory.c: make __thp_get_unmapped_area static mm/mprotect.c: fix compilation warning because of unused 'mm' variable mm/page-writeback: introduce tracepoint for wait_on_page_writeback() mm/vmscan: simplify trace_reclaim_flags and trace_shrink_flags mm/Kconfig: update "Memory Model" help text mm/vmscan.c: don't disable irq again when count pgrefill for memcg mm: memblock: make keeping memblock memory opt-in rather than opt-out hugetlbfs: always use address space in inode for resv_map pointer mm/z3fold.c: support page migration mm/z3fold.c: add structure for buddy handles mm/z3fold.c: improve compression by extending search mm/z3fold.c: introduce helper functions mm/page_alloc.c: remove unnecessary parameter in rmqueue_pcplist mm/hmm: add ARCH_HAS_HMM_MIRROR ARCH_HAS_HMM_DEVICE Kconfig mm/vmscan.c: simplify shrink_inactive_list() fs/sync.c: sync_file_range(2) may use WB_SYNC_ALL writeback xen/privcmd-buf.c: convert to use vm_map_pages_zero() xen/gntdev.c: convert to use vm_map_pages() ...
-
Christoph Hellwig authored
This export has been entirely unused since it was added more than 1 1/2 years ago. Link: http://lkml.kernel.org/r/20190429115535.12793-1-hch@lst.deSigned-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
I removed the only user of this and hadn't noticed it was now unused. Link: http://lkml.kernel.org/r/20190430152929.21813-1-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Ross Zwisler <zwisler@google.com> Signed-off-by:
-
Bharath Vedartham authored
__thp_get_unmapped_area is only used in mm/huge_memory.c. Make it static. Tested by building and booting the kernel. Link: http://lkml.kernel.org/r/20190504102353.GA22525@bharath12345-Inspiron-5559Signed-off-by:
Bharath Vedartham <linux.bhar@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Mike Rapoport authored
Since 0cbe3e26 ("mm: update ptep_modify_prot_start/commit to take vm_area_struct as arg") the only place that uses the local 'mm' variable in change_pte_range() is the call to set_pte_at(). Many architectures define set_pte_at() as macro that does not use the 'mm' parameter, which generates the following compilation warning: CC mm/mprotect.o mm/mprotect.c: In function 'change_pte_range': mm/mprotect.c:42:20: warning: unused variable 'mm' [-Wunused-variable] struct mm_struct *mm = vma->vm_mm; ^~ Fix it by passing vma->mm to set_pte_at() and dropping the local 'mm' variable in change_pte_range(). [liu.song.a23@gmail.com: fix missed conversions] Link: http://lkml.kernel.org/r/CAPhsuW6wcQgYLHNdBdw6m0YiR4RWsS4XzfpSKU7wBLLeOCTbpw@mail.gmail.comLink: http://lkml.kernel.org/r/1557305432-4940-1-git-send-email-rppt@linux.ibm.comSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
-
Yafang Shao authored
Recently there have been some hung tasks on our server due to wait_on_page_writeback(), and we want to know the details of this PG_writeback, i.e. this page is writing back to which device. But it is not so convenient to get the details. I think it would be better to introduce a tracepoint for diagnosing the writeback details. Link: http://lkml.kernel.org/r/1556274402-19018-1-git-send-email-laoar.shao@gmail.comSigned-off-by:
Yafang Shao <laoar.shao@gmail.com> Reviewed-by:
-
