- 23 Apr, 2020 36 commits
-
-
Eric Sandeen authored
[ Upstream commit c96e2b85 ] Under some circumstances we may encounter a filesystem error on a read-only block device, and if we try to save the error info to the superblock and commit it, we'll wind up with a noisy error and backtrace, i.e.: [ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode # ------------[ cut here ]------------ generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2) WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0 ... To avoid this, commit the error info in the superblock only if the block device is writable. Reported-by:
Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.netSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thomas Richter authored
[ Upstream commit 4141b6a5 ] When perf record -e SF_CYCLES_BASIC_DIAG runs with very high frequency, the samples arrive faster than the perf process can save them to file. Eventually, for longer running processes, this leads to the siutation where the trace buffers allocated by perf slowly fills up. At one point the auxiliary trace buffer is full and the CPU Measurement sampling facility is turned off. Furthermore a warning is printed to the kernel log buffer: cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling mode is full The number of allocated pages for the auxiliary trace buffer is shown as zero pages. That is wrong. Fix this by saving the number of allocated pages before entering the work loop in the interrupt handler. When the interrupt handler processes the samples, it may detect the buffer full condition and stop sampling, reducing the buffer size to zero. Print the correct value in the error message: cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling mode is full Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit af6cf95c ] When building ppc64 defconfig, Clang errors (trimmed for brevity): arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] machine_device_initcall(maple, maple_cpc925_edac_setup); ^ machine_device_initcall expands to __define_machine_initcall, which in turn has the macro machine_is used in it, which declares mach_##name with an __attribute__((weak)). define_machine actually defines mach_##name, which in this file happens before the declaration, hence the warning. To fix this, move define_machine after machine_device_initcall so that the declaration occurs before the definition, which matches how machine_device_initcall and define_machine work throughout arch/powerpc. While we're here, remove some spaces before tabs. Fixes: 8f101a05 ("edac: cpc925 MC platform device setup") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Ilie Halip <ilie.halip@gmail.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.comSigned-off-by:
-
Alexander Gordeev authored
[ Upstream commit 872f2710 ] /proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: shortened commit message] Signed-off-by:
-
Misono Tomohiro authored
[ Upstream commit 8605cf0e ] When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is initialized to 2. Therefore we need to call nfs_direct_req_release() twice to release the allocated dreq. Usually it is called in nfs_file_direct_{read, write}() and nfs_direct_complete(). However, current code only calls nfs_direct_req_relese() once if nfs_get_lock_context() fails in nfs_file_direct_{read, write}(). So, that case would result in memory leak. Fix this by adding the missing call. Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit d911c57a ] Make sure to test the stateid for validity so that we catch instances where the server may have been reusing stateids in nfs_layout_find_inode_by_stateid(). Fixes: 7b410d9c ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers") Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit 9cf4789e ] The RTC IRQ is requested before the struct rtc_device is allocated, this may lead to a NULL pointer dereference in the IRQ handler. To fix this issue, allocating the rtc_device struct before requesting the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device to register the RTC device. Also remove the unnecessary error message as the core already prints the info. Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit e0ea2d11 ] Currently we wait only until the PGC inverts the isolation setting before disabling the peripheral clocks. This doesn't ensure that the reset is properly propagated through the peripheral devices in the power domain. Wait until the PGC signals that the power up request is done and wait a bit for resets to propagate before disabling the clocks. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Sowjanya Komatineni authored
[ Upstream commit 6fe38aa8 ] Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 583b53ec ] The driver fails to probe with -EPROBE_DEFER if battery's power supply (charger driver) isn't ready yet and this results in a bit noisy error message in KMSG during kernel's boot up. Let's silence the harmless error message. Signed-off-by:
Andrew F. Davis <afd@ti.com> Reviewed-by:
Pali Rohár <pali@kernel.org> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Claudiu Beznea authored
[ Upstream commit b0ecf1c6 ] clk_hw_round_rate() may call round rate function of its parents. In case of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are controlled by clk-sam9x60-pll.c driver. The round rate function for this driver is sam9x60_pll_round_rate() which call in turn sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the proper range (rate < characteristics->output[0].min && rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will return a negative number to its caller (called by clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in case a negative number is returned by clk_core_round_rate_nolock(). With this, the USB clock will continue its rate computation even caller of clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60 may not chose the best parent. I detected this after a suspend/resume cycle on SAM9X60. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Tianyu Lan authored
[ Upstream commit f3a99e76 ] When oops happens with panic_on_oops unset, the oops thread is killed by die() and system continues to run. In such case, guest should not report crash register data to host since system still runs. Check panic_on_oops and return directly in hyperv_report_panic() when the function is called in the die() and panic_on_oops is unset. Fix it. Fixes: 7ed4325a ("Drivers: hv: vmbus: Make panic reporting to be more useful") Signed-off-by:
Tianyu Lan <Tianyu.Lan@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200406155331.2105-7-Tianyu.Lan@microsoft.comSigned-off-by:
Wei Liu <wei.liu@kernel.org> Signed-off-by:
-
Tianyu Lan authored
[ Upstream commit 040026df ] When sysctl_record_panic_msg is not set, the panic will not be reported to Hyper-V via hyperv_report_panic_msg(). So the crash should be reported via hyperv_report_panic(). Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
Tianyu Lan authored
[ Upstream commit 73f26e52 ] When a guest VM panics, Hyper-V should be notified only once via the crash synthetic MSRs. Current Linux code might write these crash MSRs twice during a system panic: 1) hyperv_panic/die_event() calling hyperv_report_panic() 2) hv_kmsg_dump() calling hyperv_report_panic_msg() Fix this by not calling hyperv_report_panic() if a kmsg dump has been successfully registered. The notification will happen later via hyperv_report_panic_msg(). Fixes: 7ed4325a ("Drivers: hv: vmbus: Make panic reporting to be more useful") Reviewed-by:
-
Tianyu Lan authored
[ Upstream commit 7f11a2cc ] If kmsg_dump_register() fails, hv_panic_page will not be used anywhere. So free and reset it. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
Tianyu Lan authored
[ Upstream commit 74347a99 ] When kdump is not configured, a Hyper-V VM might still respond to network traffic after a kernel panic when kernel parameter panic=0. The panic CPU goes into an infinite loop with interrupts enabled, and the VMbus driver interrupt handler still works because the VMbus connection is unloaded only in the kdump path. The network responses make the other end of the connection think the VM is still functional even though it has panic'ed, which could affect any failover actions that should be taken. Fix this by unloading the VMbus connection during the panic process. vmbus_initiate_unload() could then be called twice (e.g., by hyperv_panic_event() and hv_crash_handler(), so reset the connection state in vmbus_initiate_unload() to ensure the unload is done only once. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
Magnus Karlsson authored
[ Upstream commit 99e3a236 ] Add a check that the headroom cannot be larger than the available space in the chunk. In the current code, a malicious user can set the headroom to a value larger than the chunk size minus the fixed XDP headroom. That way packets with a length larger than the supported size in the umem could get accepted and result in an out-of-bounds write. Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Reported-by:
Bui Quang Minh <minhquangbui99@gmail.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225 Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.comSigned-off-by:
-
Ilya Dryomov authored
[ Upstream commit 952c48b0 ] rbd_dev_unprobe() is supposed to undo most of rbd_dev_image_probe(), including rbd_dev_header_info(), which means that rbd_dev_header_info() isn't supposed to be called after rbd_dev_unprobe(). However, rbd_dev_image_release() calls rbd_dev_unprobe() before rbd_unregister_watch(). This is racy because a header update notify can sneak in: "rbd unmap" thread ceph-watch-notify worker rbd_dev_image_release() rbd_dev_unprobe() free and zero out header rbd_watch_cb() rbd_dev_refresh() rbd_dev_header_info() read in header The same goes for "rbd map" because rbd_dev_image_probe() calls rbd_dev_unprobe() on errors. In both cases this results in a memory leak. Fixes: fd22aef8 ("rbd: move rbd_unregister_watch() call into rbd_dev_image_release()") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
[ Upstream commit 0e4e1de5 ] rbd_unregister_watch() flushes notifies and therefore cannot be called under header_rwsem because a header update notify takes header_rwsem to synchronize with "rbd map". If mapping an image fails after the watch is established and a header update notify sneaks in, we deadlock when erroring out from rbd_dev_image_probe(). Move watch registration and unregistration out of the critical section. The only reason they were put there was to make header_rwsem management slightly more obvious. Fixes: 811c6688 ("rbd: fix rbd map vs notify races") Signed-off-by:
-
Nathan Chancellor authored
commit 864eb1af upstream. Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/video/fbdev/sis/init301.c:851:42: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/video/fbdev/sis/init301.c:851:42: note: remove extraneous parentheses around the comparison to silence this warning } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~ ^ ~ drivers/video/fbdev/sis/init301.c:851:42: note: use '=' to turn this equality comparison into an assignment } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ^~ = 1 warning generated. Remove the parentheses and while we're at it, clean up the commented code, which has been here since the beginning of git history. Link: https://github.com/ClangBuiltLinux/linux/issues/118Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
ndesaulniers@google.com authored
commit 1ad3935b upstream. Clang warns: vector initializers are not compatible with NEON intrinsics in big endian mode [-Wnonportable-vector-initialization] While this is usually the case, it's not an issue for this case since we're initializing the uint8x16_t (16x uint8_t's) with the same value. Instead, use vdupq_n_u8 which both compilers lower into a single movi instruction: https://godbolt.org/z/vBrgzt This avoids the static storage for a constant value. Link: https://github.com/ClangBuiltLinux/linux/issues/214Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Tianyu Lan authored
commit a1158956 upstream. We want to notify Hyper-V when a Linux guest VM crash occurs, so there is a record of the crash even when kdump is enabled. But crash_kexec_post_notifiers defaults to "false", so the kdump kernel runs before the notifiers and Hyper-V never gets notified. Fix this by always setting crash_kexec_post_notifiers to be true for Hyper-V VMs. Fixes: 81b18bce ("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic") Reviewed-by:
-
Frank Rowand authored
commit 478ff649 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 4 of 5. target_path was not freed in the non-error path. Fixes: e0a58f3e ("of: overlay: remove a dependency on device node full_name") Reported-by:
Erhard F. <erhard_f@mailbox.org> Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Frank Rowand authored
commit 145fc138 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 3 of 5. of_unittest_overlay_high_level() failed to kfree the newly created property when the property named 'name' is skipped. Fixes: 39a751a4 ("of: change overlay apply input data from unflattened to FDT") Reported-by:
-
Frank Rowand authored
commit 216830d2 upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50 ("of/selftest: add testcase for nodes with same name and address") Reported-by:
-
Frank Rowand authored
commit b3fb36ed upstream. kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 1 of 5. of_unittest_changeset() reaches deeply into the dynamic devicetree functions. Several nodes were left with an elevated reference count and thus were not properly cleaned up. Fix the reference counts so that the memory will be freed. Fixes: 201c910b ("of: Transactional DT support.") Reported-by:
-
Takashi Iwai authored
commit 25faa4bd upstream. At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object. Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too. Fixes: 5cb543db ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zenghui Yu authored
commit edfc23f6 upstream. Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60e ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.comSigned-off-by:
-
Pablo Neira Ayuso authored
commit d9583cdf upstream. EINVAL should be used for malformed netlink messages. New userspace utility and old kernels might easily result in EINVAL when exercising new set features, which is misleading. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Martin Fuzzey authored
commit 4141f1a4 upstream. In order to wake from suspend by ethernet magic packets the GPC must be used as intc does not have wakeup functionality. But the FEC DT node currently uses interrupt-extended, specificying intc, thus breaking WoL. This problem is probably fallout from the stacked domain conversion as intc used to chain to GPC. So replace "interrupts-extended" by "interrupts" to use the default parent which is GPC. Fixes: b923ff6a ("ARM: imx6: convert GPC to stacked domains") Signed-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Luke Nelson authored
commit bb9562cf upstream. The current arm BPF JIT does not correctly compile RSH or ARSH when the immediate shift amount is 0. This causes the "rsh64 by 0 imm" and "arsh64 by 0 imm" BPF selftests to hang the kernel by reaching an instruction the verifier determines to be unreachable. The root cause is in how immediate right shifts are encoded on arm. For LSR and ASR (logical and arithmetic right shift), a bit-pattern of 00000 in the immediate encodes a shift amount of 32. When the BPF immediate is 0, the generated code shifts by 32 instead of the expected behavior (a no-op). This patch fixes the bugs by adding an additional check if the BPF immediate is 0. After the change, the above mentioned BPF selftests pass. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Co-developed-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Signed-off-by:
-
Michael Walle authored
commit ea104a9e upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48 ("watchdog: sp805: add restart handler") Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.ccSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Roman Gushchin authored
commit d87f6392 upstream. Since commit a8ac900b ("ext4: use non-movable memory for the superblock") buffers for ext4 superblock were allocated using the sb_bread_unmovable() helper which allocated buffer heads out of non-movable memory blocks. It was necessarily to not block page migrations and do not cause cma allocation failures. However commit 85c8f176 ("ext4: preload block group descriptors") broke this by introducing pre-reading of the ext4 superblock. The problem is that __breadahead() is using __getblk() underneath, which allocates buffer heads out of movable memory. It resulted in page migration failures I've seen on a machine with an ext4 partition and a preallocated cma area. Fix this by introducing sb_breadahead_unmovable() and __breadahead_gfp() helpers which use non-movable memory for buffer head allocations and use them for the ext4 superblock readahead. Reviewed-by:
Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.comSigned-off-by:
-
Li Bin authored
commit 849f8583 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c704 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Josh Poimboeuf authored
commit b401efc1 upstream. If a switch jump table's indirect branch is in a ".cold" subfunction in .text.unlikely, objtool doesn't detect it, and instead prints a false warning: drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame Fix it by comparing the function, instead of the section and offset. Fixes: 13810435 ("objtool: Support GCC 8's cold subfunctions") Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.comSigned-off-by:
-
Luke Nelson authored
commit 4178417c upstream. This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b ("ARM: net: bpf: fix LDX instructions") Co-developed-by:
-
- 21 Apr, 2020 4 commits
-
-
Greg Kroah-Hartman authored
-
Austin Kim authored
commit 7ea36242 upstream. If !area->pages statement is true where memory allocation fails, area is freed. In this case 'area->pages = pages' should not executed. So move 'area->pages = pages' after if statement. [akpm@linux-foundation.org: give area->pages the same treatment] Link: http://lkml.kernel.org/r/20190830035716.GA190684@LGEARND20B15Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Roman Penyaev <rpenyaev@suse.de> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Karthick Gopalasubramanian authored
commit 32dcfe83 upstream. Reset file is not used and may cause race conditions with operational driver if used. Signed-off-by:
Karthick Gopalasubramanian <kargop@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Dedy Lansky authored
commit 61e5ec04 upstream. When enlarging rx_ring_order module param, wil6210 fails to load because there are not enough Rx buffers. Fix this by enlarging number of Rx buffers at startup, if needed based on rx_ring_order. Signed-off-by:
Dedy Lansky <dlansky@codeaurora.org> Signed-off-by:
-
