- 06 Feb, 2018 9 commits
-
-
Rodrigo Vivi authored
If the table result is out of bounds on the array map there is something really wrong with VBT pin so we don't return that vbt_pin, but only return 0 instead. This basically reverts commit 'a8e6f388 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")' Also this properly fixes commit 9c3b2689 ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.") v2: Do in a way that we don't break other platforms. (Jani) v3: Keep debug message (Jani) v4: Don't mess with 0 mapping was noticed by Jani and addressed with a simple solution suggested by Lucas that makes this even simpler. Fixes: a8e6f388 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.") Fixes: 9c3b2689 ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.") Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Suggested-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com (cherry picked from commit 3393ce1e) Signed-off-by:
-
Rodrigo Vivi authored
Let's ignore VBT request if the pin is clearly wrong. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139 Cc: Kai Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> (cherry picked from commit a8e6f388) Signed-off-by:
-
Michal Srb authored
The command MEDIA_VFE_STATE checks bits at offset +2 dwords. However, it is possible to have MEDIA_VFE_STATE command with length = 0 + LENGTH_BIAS = 2. In that case check_cmd will read bits from the following command, or even past the end of the buffer. If the offset ends up outside of the command length, reject the command. Fixes: 351e3db2 ("drm/i915: Implement command buffer parsing logic") Signed-off-by:
Michal Srb <msrb@suse.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180205151745.29292-1-msrb@suse.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Michal Srb authored
The find_reg function was assuming that there is always at least one table in reg_tables. It is not always true. In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0, implying that no register-accessing commands are allowed. However, the command tables include commands such as MI_STORE_REGISTER_MEM. When trying to check such command, the find_reg would dereference NULL pointer. Now it will just return NULL meaning that the register was not found and the command will be rejected. Fixes: 76ff480e ("drm/i915/cmdparser: Use binary search for faster register lookup") Signed-off-by:
-
Imre Deak authored
Currently we see sporadic timeouts during CDCLK changing both on BXT and GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by changing the frequency in a tight loop after blanking the display. The upper bound for the completion time is 800us based on my tests, so increase it from the current 500us to 2ms; with that I couldn't trigger the problem either on BXT or GLK. Note that timeouts happened during both the change notification and the voltage level setting PCODE request. (For the latter one BSpec doesn't require us to wait for completion before further HW programming.) This issue is similar to commit 2c7d0602 ("drm/i915/gen9: Fix PCODE polling during CDCLK change notification") but there the PCODE request does complete (as shown by the mbox busy flag), only the reply we get from PCODE indicates a failure. So there we keep resending the request until a success reply, here we just have to increase the timeout for the one PCODE request we send. v2: - s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.4+ Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com (cherry picked from commit e76019a8) Signed-off-by:
-
Tina Zhang authored
For KVMGT, the guest opregion, which is handled by VFIO, is actually a piece of guest memory which won't be accessed by devices. So, its mfn shouldn't be obtained through VFIO interface. This patch uses KVM r/w interface to access the data in guest opregion. Fix the guest opregion accessing issue when host "intel_iommu=on". v3: - Remove mapped flag for KVM/VFIO usage, as it's useless for KVM. v2: - Set the gpa correctly when invoking KVM r/w operations. (Zhenyu) Signed-off-by:
Tina Zhang <tina.zhang@intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
Changbin Du authored
When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest is emulated. But the vgpu_aperture_rw() function take wrong offset when do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture. This mistake cause GPU command in guest get lost and so the seqno is not updated in engine HWSP. This patch fix this, and it also move the emulation code to kvmgt. Because only vfio need to emulate it. Put aperture rw to MMIO emulation path breaks assumptions in xengt. v2: Remove PAGE_ALIGN for size (zhenyu) Fixes: f090a00d ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
Weinan Li authored
Only reset vgpu execlist state of the exact engine which gets reset request from VM. After read context status from HWSP enabled, KMD will use the saved CSB read pointer but not always read from MMIO. When one engine reset happen, only the read pointer of this engine will be reset, in GVT-g host side also need to align with this policy, otherwise VM may get wrong CSB status after one engine reset compeleted. v2: Split refine and fix patch, code refine(Zhenyu) v3: Move active flag of vgpu scheduler into sched_data(Zhenyu) Cc: Fred Gao <fred.gao@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Weinan Li <weinan.z.li@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Weinan Li authored
Using per engine ops will be more flexible, here refine sub-ops(init, clean) as per engine operation align with reset operation. This change also will be used in next fix patch for VM engine reset. Cc: Fred Gao <fred.gao@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
-
- 05 Feb, 2018 2 commits
-
-
git://github.com/skeggsb/linuxDave Airlie authored
- initial kepler clock gating support - atomic gamma handling fixes - support for gp108 "secure boot" (enables acceleration, finally) * 'linux-4.16' of git://github.com/skeggsb/linux: drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning drm/nouveau/mmu: Fix trailing semicolon drm/nouveau: Introduce NvPmEnableGating option drm/nouveau: Add support for SLCG for Kepler2 drm/nouveau: Add support for BLCG on Kepler2 drm/nouveau: Add support for BLCG on Kepler1 drm/nouveau: Add support for basic clockgating on Kepler1 drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets drm/nouveau/kms/nv50: use "low res" lut for indexed mode drm/nouveau/kms/nv50: prepare for double-buffered LUTs drm/nouveau/bo: add helper functions for handling pinned+mapped buffers drm/nouveau/fbcon: add module parameter to select bits-per-pixel drm/nouveau/secboot/gp108: implement on top of acr_r370 drm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode drm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation drm/nouveau: nouveau: use correct string length drm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings drm/nouveau/pmu/fuc: don't use movw directly anymore
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-02-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Fixes for GPU hangs and other bugs around hangcheck and result; Fix for regression on suspend case with vgaswitcheroo; Fixes for eDP and HDMI blank screens Fix for protecting WC allocation to avoid overflow on page vec; Cleanup around unpublished GLK firmware blobs, and other small fixes. This also contains GVT pull request mostly with regression fixes on vGPU display dmabuf, mmio switch and other misc changes. * tag 'drm-intel-next-fixes-2018-02-01' of git://anongit.freedesktop.org/drm/drm-intel: (21 commits) drm/i915/ppgtt: Pin page directories before allocation drm/i915: Always run hangcheck while the GPU is busy Revert "drm/i915: mark all device info struct with __initconst" drm/i915/edp: Do not do link training fallback or prune modes on EDP drm/i915: Check for fused or unused pipes drm/i915: Protect WC stash allocation against direct reclaim drm/i915: Only attempt to scan the requested number of shrinker slabs drm/i915: Always call to intel_display_set_init_power() in resume_early. drm/i915/gvt: cancel scheduler timer when no vGPU exists drm/i915/gvt: cancel virtual vblank timer when no vGPU exists drm/i915/gvt: Keep obj->dma_buf link NULL during exporting drm/i915/pmu: Reconstruct active state on starting busy-stats drm/i915: Stop getting the fault address from RING_FAULT_REG drm/i915/guc: Add uc_fini_wq in gem_init unwind path drm/i915: Fix using BIT_ULL() vs. BIT() for power domain masks drm/i915: Try EDID bitbanging on HDMI after failed read drm/i915/glk: Disable Guc and HuC on GLK drm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs array drm/i915/gvt: validate gfn before set shadow page entry drm/i915/gvt: add PLANE_KEYMAX regs to mmio track list ...
-
- 02 Feb, 2018 19 commits
-
-
Arnd Bergmann authored
gcc thinks that interpreting a multiplication result as a bool is confusing: drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c: In function 'read_pll': drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:133:8: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] Adding a temporary variable to contain the divisor helps make it clear what is going on and avoids that warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Luis de Bethencourt authored
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by:
Luis de Bethencourt <luisbg@kernel.org> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Lyude Paul authored
This adds the NvPmEnableGating config option to nouveau, which can be used to enable or disable clockgating for supported chipsets. Enabling can be done by passing config=NvPmEnableGating=1 To nouveau. If your chipset supports it, you'll see a message in your kernel log indicating that clockgating is enabled. Since clockgating has only had limited testing thus far, we leave this option disabled by default for now. Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Lyude Paul authored
That's right, there's still more power saving to go! Starting with kepler 2, nvidia hardware has an additional level of clockgating known as second level clockgating. The details of this are not exact, but it seems to work by waiting for a collection of dependent hardware blocks to be gated before taking affect. As with the previous series, this results in another noticeable drop in power consumption and is programmed in the same manner. Signed-off-by:
-
Lyude Paul authored
Same as the previous patch, but for Kepler2 now Signed-off-by:
-
Lyude Paul authored
This enables BLCG optimization for kepler1. When using clockgating, nvidia's firmware has a set of registers which are initially programmed by the vbios with various engine delays and other mysterious settings that are safe enough to bring up the GPU. However, the values used by the vbios are more power hungry then they need to be, so the nvidia driver writes it's own more optimized set of BLCG settings before enabling CG_CTRL. This adds support for programming the optimized BLCG values during engine/subdev init, which enables rather significant power savings. This introduces the nvkm_therm_clkgate_init() helper, which we use to program the optimized BLCG settings before enabling clockgating with nvkm_therm_clkgate_enable. As well, this commit shares a lot more code with Fermi since BLCG is mostly the same there as far as we can tell. In the future, it's likely we'll reformat the clkgate_packs for kepler1 so that they share a list of mmio packs with Fermi. Signed-off-by:
-
Lyude Paul authored
This adds support for enabling automatic clockgating on nvidia GPUs for Kepler1. While this is not technically a clockgating level, it does enable clockgating using the clockgating values initially set by the vbios (which should be safe to use). This introduces two therm helpers for controlling basic clockgating: nvkm_therm_clkgate_enable() - enables clockgating through CG_CTRL, done after initializing the GPU fully nvkm_therm_clkgate_fini() - prepares clockgating for suspend or driver unload A lot of this code was originally going to be based off of fermi; however it turns out that while Fermi's the first line of GPUs that introduced this kind of power saving, Fermi requires more fine tuned control of the CG_CTRL registers from the driver while reclocking that we don't entirely understand yet. For the simple parts we will be sharing with Fermi for certain however, we at least add those into a new subdev/therm/gf100.h header. Signed-off-by:
-
Ben Skeggs authored
We've still been directly using the legacy crtc gamma_set() hook even after conversion to atomic modesetting. For userspace clients this was fine, however, fbcon will use the atomic property when it's running on an atomic driver, which means we miss its colormap updates - which is particularly bad for 8bpp framebuffers! This commit converts the driver to use the atomic property + the helper function implementing the legacy hook on top of atomic. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675Signed-off-by:
-
Ben Skeggs authored
For some reason forgotten by history, we've been using a 1025-entry LUT mode, and sparsely filling it with the 256-entry LUT we're handed. Until we land support for the full atomic colour management properties, this commit switches to using the 257-entry mode to fix colour mapping with depth 30 framebuffers. Reported-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ilia Mirkin authored
This is what was done prior to the big refactor in kernel 3.8, and what was done by xf86-video-nv. Experimentally, it seems like there's some sort of issue with the high-res lut to be used there. Tested on G92. This ends up mattering because fbcon/fbdev chooses the C8 fb format for low-vram systems, which can occur with some IGP-based configurations with little "stolen" vram. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675Signed-off-by:
-
Ben Skeggs authored
We need to double-buffer LUTs to handle their update atomically. Signed-off-by: -
Ben Skeggs authored
This is a common, awkward sequence. Let's wrap it up! Signed-off-by: -
Ben Skeggs authored
Useful for debugging. Signed-off-by: -
Ben Skeggs authored
Signed-off-by:
Gourav Samaiya <gsamaiya@nvidia.com>
-
Ben Skeggs authored
Signed-off-by:
-
Ben Skeggs authored
It's entirely possibly that the other r375 code is relevant to r370 too, but I've not confirmed this, so I'll leave it where it is for now. NVIDIA's copyright headers maintained, as it's still all their code. Signed-off-by:
-
Arnd Bergmann authored
gcc-8 reports drivers/gpu/drm/nouveau/nvkm/engine/pm/base.c: In function 'nvkm_perfmon_mthd': include/linux/string.h:265:9: error: '__builtin_strncpy' specified bound 64 equals destination size [-Werror=stringop-truncation] We need one less byte or call strlcpy() to make it a nul-terminated string. Signed-off-by:
-
Christoph Böhmwalder authored
The kbuild test bot complained about a new coccinelle warning nearby, which sparked a discussion about the assignment to 'memory' inside of the conditional expression. See Link below for the original post. Fix the assignment to silence the coccinelle warning and also make the code look a little nicer. Link: https://lists.freedesktop.org/archives/nouveau/2017-November/029242.htmlSigned-off-by:
Christoph Böhmwalder <christoph@boehmwalder.at> Signed-off-by:
-
Karol Herbst authored
Fixes failure to compile with recent envyas as a result of the 'movw' alias being removed for v5. A bit of history: v3 only has a 16-bit sign-extended immediate mov op. In order to set the high bits, there's a separate 'sethi' op. envyas validates that the value passed to mov(imm) is between -0x8000 and 0x7fff. In order to simplify macros that load both the low and high word, a 'movw' alias was added which takes an unsigned 16-bit immediate. However the actual hardware op still sign extends. v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op is gone (loads 0 into the dst reg). However due to a bug in envyas, the movw alias still existed, and selected the no-longer-present v3 16-bit immediate mov op. As a result usage of movw on v5 is the same as mov with a 0x0 argument. The proper fix throughout is to only ever use the 'movw' alias in combination with 'sethi'. Anything else should get the sign-extended validation to ensure that the intended value ends up in the destination register. Changes in fuc3 binaries is the result of a different encoding being selected for a mov with an 8-bit value. v2: added commit message written by Ilia, thanks for that! v3: messed up rebasing, now it should apply Signed-off-by:
-
- 01 Feb, 2018 10 commits
-
-
Chris Wilson authored
Commit e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes") believed that because it did not insert its freshly allocated page directory into the pd tree, it was safe from the shrinker. I failed to heed the lesson learnt from commit dd19674b ("drm/i915: Remove bitmap tracking for used-ptes") that we need to pin all the levels in the tree before hitting the shrinker or else the shrinker may free an upper layer as we proceed to allocate the tree. Thus leaving dangling pointers everywhere and a GPF should we hit direct reclaim at just the wrong moment. CPU: 0 PID: 7374 Comm: chromium Tainted: P O 4.14.13-1-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017 task: ffff994f696c2c40 task.stack: ffffb1a789d4c000 RIP: 0010:gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: 0018:ffffb1a789d4f940 EFLAGS: 00010206 RAX: 81c1788cc4f68138 RBX: ffff994f54db8000 RCX: ffff994f696c2c40 RDX: 000000023bc73003 RSI: ffff994d598b6b80 RDI: ffff994f54db8000 RBP: ffff994d598b6b80 R08: 0000000000000000 R09: 0000000000000000 R10: ffffb1a789d4f550 R11: ffff994eaf3c3208 R12: 0000000000000027 R13: 0000000000005000 R14: 0000000004e8f000 R15: ffff994f54dba000 FS: 00007f585886aa00(0000) GS:ffff994faec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004ac8e8 CR3: 00000002552c8004 CR4: 00000000003606f0 Call Trace: gen8_ppgtt_alloc_pdp+0x178/0x320 [i915] gen8_ppgtt_alloc_4lvl+0x5f/0x150 [i915] ppgtt_bind_vma+0x30/0x70 [i915] i915_vma_bind+0x68/0xd0 [i915] __i915_vma_do_pin+0x2d6/0x3a0 [i915] eb_lookup_vmas+0x7a2/0xb50 [i915] i915_gem_do_execbuffer+0x4d7/0x10e0 [i915] ? sock_wfree+0x34/0x60 ? unix_stream_read_generic+0x1f9/0x7e0 ? import_iovec+0x37/0xd0 ? i915_gem_execbuffer2+0x5d/0x390 [i915] i915_gem_execbuffer2+0x1b7/0x390 [i915] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] drm_ioctl_kernel+0x59/0xb0 [drm] drm_ioctl+0x2d5/0x370 [drm] ? i915_gem_execbuffer+0x2d0/0x2d0 [i915] ? __seccomp_filter+0x3b/0x260 do_vfs_ioctl+0xa1/0x610 ? syscall_trace_enter+0xdb/0x2b0 SyS_ioctl+0x74/0x80 do_syscall_64+0x55/0x110 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f584fa82d27 RSP: 002b:00007ffee14a7828 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000003b0126a1030 RCX: 00007f584fa82d27 RDX: 00007ffee14a7870 RSI: 0000000040406469 RDI: 0000000000000080 RBP: 00007ffee14a7870 R08: 0000000000000002 R09: 0000000000000077 R10: 00007f5839f2b780 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000080 R14: 00007f5842b00040 R15: 0000000000000000 Code: 01 00 83 81 58 0a 00 00 01 48 2b 05 13 9d fd c9 48 c1 f8 06 48 c1 e0 0c 48 8d 04 d0 48 8b 56 08 48 03 05 0c 9d fd c9 48 83 ca 03 <48> 89 10 83 a9 58 0a 00 00 01 65 ff 0d 37 03 fb 3e 74 02 f3 c3 RIP: gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: ffffb1a789d4f940 Reported-by:
Eric Blau <eblau@eblau.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104773 Fixes: e2b763ca ("drm/i915: Remove bitmap tracking for used-pdpes") References: dd19674b ("drm/i915: Remove bitmap tracking for used-ptes") Testcase: igt/drv_selftest/live_gtt (igt_ppgtt_shrink_boom) Signed-off-by:
Matthew Auld <matthew.auld@intel.com> (cherry picked from commit b715a2f0) Signed-off-by:
-
Chris Wilson authored
Previously, we relied on only running the hangcheck while somebody was waiting on the GPU, in order to minimise the amount of time hangcheck had to run. (If nobody was watching the GPU, nobody would notice if the GPU wasn't responding -- eventually somebody would care and so kick hangcheck into action.) However, this falls apart from around commit 4680816b ("drm/i915: Wait first for submission, before waiting for request completion"), as not all waiters declare themselves to hangcheck and so we could switch off hangcheck and miss GPU hangs even when waiting under the struct_mutex. If we enable hangcheck from the first request submission, and let it run until the GPU is idle again, we forgo all the complexity involved with only enabling around waiters. We just have to remember to be careful that we do not declare a GPU hang when idly waiting for the next request to be come ready, as we will run hangcheck continuously even when the engines are stalled waiting for external events. This should be true already as we should only be tracking requests submitted to hardware for execution as an indicator that the engine is busy. Fixes: 4680816b ("drm/i915: Wait first for submission, before waiting for request completion" Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 88923048) Signed-off-by:
-
Lionel Landwerlin authored
This reverts commit 5b54eddd. Conflicts: drivers/gpu/drm/i915/i915_pci.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104805Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Manasi Navare authored
In case of eDP because the panel has a fixed mode, the link rate and lane count at which it is trained corresponds to the link BW required to support the native resolution of the panel. In case of panles with lower resolutions where fewer lanes are hooked up internally, that number is reflected in the MAX_LANE_COUNT DPCD register of the panel. So it is pointless to fallback to lower link rate/lane count in case of link training failure on eDP connector since the lower link BW will not support the native resolution of the panel and we cannot prune the preferred mode on the eDP connector. In case of Link training failure on the eDP panel, something is wrong in the HW internally and hence driver errors out with a loud and clear DRM_ERROR message. v2: * Fix the DEBUG_ERROR and add {} in else (Ville Syrjala) Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Mika Kahola authored
We may have fused or unused pipes in our system. Let's check that the pipe in question is within limits of accessible pipes. In case, that we are not able to access the pipe, we return early with a warning. v2: Rephrasing of the commit message (Jani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206Reported-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Jaswinder Singh Rajput <jaswinder@perfectintelligent.com> Suggested-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Chris Wilson authored
As we attempt to allocate pages for use in a new WC stash, direct reclaim may run underneath us and fill up the WC stash. We have to be careful then not to overflow the pvec. Fixes: 66df1014 ("drm/i915: Keep a small stash of preallocated WC pages") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109Signed-off-by:
-
Chris Wilson authored
Since commit 4e773c3a ("drm/i915: Wire up shrinkctl->nr_scanned"), we track the number of objects we scan and do not wish to exceed that as it will overly penalise our own slabs under mempressure. Given that we now know the target number of objects to scan, use that as our guide for deciding to shrink as opposed to the number of objects we manage to shrink (which doesn't correspond to the numbers we report to shrinkctl). Fixes: 4e773c3a ("drm/i915: Wire up shrinkctl->nr_scanned") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> (cherry picked from commit 29d384e3) Signed-off-by:
-
Maarten Lankhorst authored
intel_power_domains_init_hw() calls set_init_power, but when using runtime power management this call is skipped. This prevents hw readout from taking place. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172 Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com Fixes: bc87229f ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle") Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by:
-
Zhenyu Wang authored
Stop gvt scheduler timer if no vGPU exists, otherwise it keeps gvt service thread busy to handle request schedule event but no actual schedule activity required. Reviewed-by:
-
Zhenyu Wang authored
Stop irq timer for virtual vblank timer emulation if no vGPU exists, otherwise it will keep gvt service thread busy to handle virtual vblank but no use. Reviewed-by:
-
