- 21 Jan, 2012 24 commits
-
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This is used on az6007. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This driver were written to use a previous solution for MFE at dvb-usb. Due to the internal API changes, change the binding to work with the new way. Signed-off-by: -
Mauro Carvalho Chehab authored
Use the newly dvb-usb MFE support added by changeset 9bd9e3bd. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The code still needs to be commented, as there's a mutex missing at the az6007_read() call. A mutex there is needed, in order to prevent RC (or CI) calls while other operations are in progress. Signed-off-by: -
Mauro Carvalho Chehab authored
Everything to reset the demod is already at az6007_frontend_poweron(). Signed-off-by: -
Mauro Carvalho Chehab authored
This patch introduces no functional changes. It basically defines a macro for each different req found at the driver, and cleans the code to use them, making easier to understand the code. With regards to the IR handling code, although the original code doesn't define what's the request, it is clear, from the USB logs, that 0xc5 is for IR polling. Signed-off-by: -
Mauro Carvalho Chehab authored
Use usb_device for those routines, as it allows using them on all places. While there, rename to better express the meaning. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Move the ngene/ddbridge firmware into their drivers. There are two reasons for that: 1) The firmware used there didn't work for a few devices I tested here (Terratec H5, H6 and H7); 2) At least Terratec H7 doesn't seem to require a firmware for it to work. After this change, if firmware is not specified, the driver will use a rom-based firmware (this seems to be the case for Terratec H7, although I need to better check the USB dumps to be sure about that). In any case, the firmware seems to be optional, as the DRX-K driver don't return the firmware load error. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The comments there is wrong. Signed-off-by: -
Mauro Carvalho Chehab authored
The header file serves for no purpose and exports some things that should be static. Signed-off-by: -
Mauro Carvalho Chehab authored
make checkpatch.pl happy Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The mutex is there to protect the I2C gate. However, for some reason, it is being called twice: [ 2103.542796] usbcore: registered new interface driver dvb_usb_az6007 [ 2103.772392] az6007: drxk_gate_ctrl: enable [ 2103.793900] az6007: drxk_gate_ctrl: enable For now, let's just comment, to allow the driver to run. Signed-off-by: -
Mauro Carvalho Chehab authored
mt2063 uses a one-byte transfer. This requires a special handling inside the i2c code. Fix it to properly accept i2c reads. This is needed to make the mt2063 to be detected. Signed-off-by: -
Mauro Carvalho Chehab authored
Add some fixes to allow frontend attachment. The patch is not complete yet, as just the frontend 0 is initialized. So, more changes will be needed, including some changes at dvb-usb core. Signed-off-by: -
Mauro Carvalho Chehab authored
Some changes are needed, in order to make az6007 compile with the upstream tree. Most of the changes are due to the upstream drxk module. Even allowing its compilation, the driver is not working yet. Signed-off-by: -
Mauro Carvalho Chehab authored
Import the az6007 driver from Terratec H7 source, as-is. It won't compile or run, so latter patches are needed in order to fix it. Signed-off-by:
-
- 18 Jan, 2012 16 commits
-
-
Laurent Pinchart authored
The as3645a driver calls kzalloc(). Include slab.h. Reported-by:
Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sachin Kamat authored
Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Signed-off-by:
-
Dan Carpenter authored
The intent here was to test if the FE_HAS_LOCK was set. The current test is equivalent to "if (status) { ..." Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
Several control names used inconsistent capitalization or were inconsistent in other ways. I also corrected a spelling mistake and fixed four strings that were too long (>31 characters). Harmless, but the string is cut off when it is returned with QUERYCTRL. Signed-off-by:
-
Jiri Slaby authored
Add an override of read_status to intercept lock status. This allows us to switch LEDs appropriately on and off with signal un/locked. The second phase is to override sleep to properly turn off both. This is a hackish way to achieve that. Thanks to Mike Krufky for his help. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Jiri Slaby authored
This means cut & paste from the former f. attach. But while at it write to the right GPIO to turn on the right LED. Also turn the other two off jsut for sure. Signed-off-by:
-
Jiri Slaby authored
The start is common for both stk7070pd and novatd specific routine. This is just a preparation for the next patch. Signed-off-by:
-
Jiri Slaby authored
To properly support the three LEDs which are on the stick, we need a special handling in the ->frontend_attach function. Thus let's have a separate ->frontend_attach instead of ifs in the common one. The hadnling itself will be added in further patches. Signed-off-by:
-
Patrick Boettcher authored
The dib0700 needs a binary firmware file. This patch added the MODULE_FIRMWARE-macro. Signed-off-by:
Christoph Anton Mitterer <calestyo@scientia.net> Signed-off-by:
-
Patrick Boettcher authored
This small patch removes superfluous DTV_CMDs from dvb_frontend.c which were added in the initially when ISBD-T support was added. They were there unnoticed even though compilers should have warning about those duplicates. Finally they did and now we can remove them. Thanks to Dan Carpenter <dan.carpenter@oracle.com> for pointing that out. Signed-off-by:
-
Marek Szyprowski authored
queue_setup callback has been extended with struct v4l2_format *fmt parameter in 2d86401c commit. This patch adds this parameter to s5p-jpeg driver. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Kamil Debski authored
Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Kamil Debski authored
Signed-off-by:
-
Julia Lawall authored
Rewrite a duplicated test to test the correct value The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
-
Julia Lawall authored
Rewrite a duplicated test to test the correct value The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by:
-
