- 11 Oct, 2015 6 commits
-
-
Jon Ringle authored
Signed-off-by:
Jon Ringle <jringle@gridpoint.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-10-08 Here's another set of Bluetooth & 802.15.4 patches for the 4.4 kernel. 802.15.4: - Many improvements & fixes to the mrf24j40 driver - Fixes and cleanups to nl802154, mac802154 & ieee802154 code Bluetooth: - New chipset support in btmrvl driver - Fixes & cleanups to btbcm, btmrvl, bpa10x & btintel drivers - Support for vendor specific diagnostic data through common API - Cleanups to the 6lowpan code - New events & message types for monitor channel Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
wangweidong authored
we have two processes to do: P1#: ifconfig eth0 down; which will call bnx2_close, then will , and set Null to stats_blk P2#: ifconfig eth0; which will call bnx2_get_stats64, it will use stats_blk. In one case: --P1#-- --P2#-- stats_blk(no null) bnx2_free_mem ->bp->stats_blk = NULL GET_64BIT_NET_STATS then it will cause 'NULL Pointer' Problem. it is as well with 'ethtool -S ethx'. Allocate the statistics block at probe time so that this problem is impossible Signed-off-by:Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
-
Eric Dumazet authored
selinux needs few changes to accommodate fact that SYNACK messages can be attached to a request socket, lacking sk_security pointer (Only syncookies are still attached to a TCP_LISTEN socket) Adds a new sk_listener() helper, and use it in selinux and sch_fq Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported by: kernel test robot <ying.huang@linux.intel.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Hariprasad Shenai authored
t4_check_fw_version() can return several error codes (-EINVAL, -EBUSY, -EAGAIN). The present code sets the adapter state to UNINIT only if its an EFAULT. In all the error cases set the adapter to uninitialized state. In t4_check_fw_version() if call to t4_get_fw_version() fails, repeat the operation a few times before returning failure. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Alexei Starovoitov authored
eBPF socket filter programs may see junk in 'u32 cb[5]' area, since it could have been used by protocol layers earlier. For socket filter programs used in af_packet we need to clean 20 bytes of skb->cb area if it could be used by the program. For programs attached to TCP/UDP sockets we need to save/restore these 20 bytes, since it's used by protocol layers. Remove SK_RUN_FILTER macro, since it's no longer used. Long term we may move this bpf cb area to per-cpu scratch, but that requires addition of new 'per-cpu load/store' instructions, so not suitable as a short term fix. Fixes: d691f9e8 ("bpf: allow programs to write to certain skb fields") Reported-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
- 09 Oct, 2015 24 commits
-
-
David S. Miller authored
Paul Gortmaker says: ==================== make non-modular code explicitly non-modular [v2: drop m68k patches that Geert converted to modules; add one ARM driver patch ; update net-next baseline to today; switch to ARM for build testing.] In a previous merge window, we made changes to allow better delineation between modular and non-modular code in commit 0fd972a7 ("module: relocate module_init from init.h to module.h"). This allows us to now ensure module code looks modular and non-modular code does not accidentally look modular just to avoid suffering build breakage. Here we target code that is, by nature of their Makefile and/or Kconfig settings, only available to be built-in, but implicitly presenting itself as being possibly modular by way of using modular headers, macros, and functions. The goal here is to remove that illusion of modularity from these files, but in a way that leaves the actual runtime unchanged. In doing so, we remove code that has never been tested and adds no value to the tree. And we continue the process of expecting a level of consistency between the Kconfig/Makefile of code and the code in use itself. Fortuntately the net subsystem has relatively few instances, given the overall amount of code and drivers it contains. For comparison there are over 300 instances tree wide, resulting in a possible net removal of on the order of 5000 lines of unused code. Build tested on net-next from today, on ARM, since that is the arch where the one ethernet driver changed here is available. ==================== Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/net/ethernet/ti/Kconfig:config TI_CPSW_PHY_SEL drivers/net/ethernet/ti/Kconfig: bool "TI CPSW Switch Phy sel Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: net/sched/Kconfig:menuconfig NET_SCHED net/sched/Kconfig: bool "QoS and/or fair queueing" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag since all that information is already contained at the top of the file in the comments. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: net/dcb/Kconfig:config DCB net/dcb/Kconfig: bool "Data Center Bridging support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We also delete the MODULE_LICENSE tag etc. since all that information is (or is now) already contained at the top of the file in the comments. Cc: "David S. Miller" <davem@davemloft.net> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Anish Bhatt <anish@chelsio.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Shani Michaeli <shanim@mellanox.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Makefile currently controlling compilation of this code lists it under "obj-y" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We can change to one of the other priority initcalls (subsys?) at any later date, if desired. We can't remove module.h since the file uses other module related stuff even though it is not modular itself. We move the information from the MODULE_LICENSE tag to the top of the file, since that information is not captured anywhere else. The MODULE_ALIAS_NET_PF_PROTO becomes a no-op in the non modular case, so it is removed. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Craig Gallek <kraig@google.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
David S. Miller authored
Yaowei Bai says: ==================== net: small improvement This patchset makes several functions in net return bool to improve readability and/or simplicity because these functions only use one or zero as their return value. No functional changes. ==================== Signed-off-by: -
Yaowei Bai authored
This patch makes lockdep_rtnl_is_held return bool due to this particular function only using either one or zero as its return value. In another patch lockdep_is_held is also made return bool. No functional change. Signed-off-by:
Yaowei Bai <bywxiaobai@163.com> Signed-off-by:
-
Yaowei Bai authored
This patch makes bad_mask return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes inet_ifa_match return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes dccp_bad_service_code return bool due to these particular functions only using either one or zero as their return value. dccp_list_has_service is also been made return bool in this patchset. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes dccp_list_has_service return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes can_dropped_invalid_skb return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Yaowei Bai authored
This patch makes lockdep_nfnl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes ieee80211_is_* return bool to improve readability due to these particular functions only using either one or zero as their return value. No functional change. Signed-off-by:
-
Yaowei Bai authored
This patch makes lockdep_genl_is_held return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ============================== Mellanox driver update for net-next Some small fixes and small enhancements from the team. Series applies over net-next commit acb4a6bf "tcp: ensure prior synack rtx behavior with small backlogs". ============================== Signed-off-by:
-
Saeed Mahameed authored
The 'for' loop when undoing rb-tree insertions and list-adds in the error flow in add_res_range had errors, fix them. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that. Signed-off-by:
-
Ido Shamay authored
Changed the receive control flow in a way that steering rules are added only when the RSS object is already in RTR/RTS mode. Some optimization features, which are enabled by the device firmware, require this condition in order to be effective. Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use a single threaded work queue for each device in the system instead of using one thread for any device. This is required so we can concurrently process system error handling for all the devices that need that. Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Use ioread function to read health buffer data. In addition, print the firmware version as a string for readability and also use dev_err to have the device string to be printed. Signed-off-by:
-
Eli Cohen authored
In preparation to handling system errors at the mlx5_core level, change the interface of cmd_work_handler to accept a 64 bit argument for the vector. This allows to encode a flag that signifies when the handler is called as a result of a driver logic that wishes to terminate commands that the hardware may not be able to terminate. Such command completions are detected at the handler and proper return status is encoded. To be able to terminate page handler commands, we make sure to set the corresponding bit in the bitmask. Signed-off-by:
-
Eli Cohen authored
Improve the messages printed by the mlx5 macros to include the device string. In addition, prefix names used by the macros with two underscores to avoid possible name collisions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-10-08 This series contains updates to i40e and i40evf only (again). Jesse fixes an issue where the driver was issuing a WARN_ON during ring size changes because the code was cloning the rx_ring struct but not zeroing out the pointers before allocating new memory, so simply zero out the pointers. Also reduced the function call overhead by moving the interrupt enable function by moving it to the header file, which it in turn allows us to inline it. Also does a thorough job of code cleanup to fix spaces after declarations, remove unnecessary braces and breaks, remove another __func__ use and general code tidiness. Mitch adds mover verbose error messages when the number of supported VFs is reported in driver init and it different from the number reported in config space. Updated the VF driver to now detect a reset with the VF_ARQLEN register since the enable bit is cleared when the VF is reset and it stays cleared until the VF driver processes the reset and re-enables the admin queue which is more reliable than using the VFGEN_RSTAT as previously. Neerav adds parsing for CEE DCBx TLVs from the LLDP MIB since there is a need to get the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer for debug and other application purposes. Carolyn fixes a problem where the PF's Flow Director filter table would have an entry that the hardware was unable to add, when this occurs an invalid entry gets replayed and a valid one is lost. Matt fixes an issue where multiple link up messages can be logged resulting from admin queue link status timing when link properties are changed. Shannon adds the ability to control the period link polling through ethtool to be able to switch it off and on for debugging link issues. Serey explicitly assigns the enum index for each VSI type so that the PF and VF always reference to the same VSI type event if the enum lists are different. ==================== Signed-off-by:
-
- 08 Oct, 2015 10 commits
-
-
Jesse Brandeburg authored
To help users and developers know what compile options and hardware features are enabled at compile time, print VxLAN is available. Change-ID: I3162f3b7678dc725a597f964217920eb218b480b Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
The VF really doesn't care about the QOS handle but it will in the future. Since the VF only uses TC0, send it that handle. On the VF side, save the handle and use it to populate the QOS params when we call into the client interface. Change-ID: I76f41b070baeaa09b19383e9168bc677837e0761 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
Use the capabilities passed to us by the PF driver to control VF driver behavior. In the process, clean up the VLAN add/remove code so it's not a horrible morass of ifdefs. Change-ID: I1050eaf12b658a26fea6813047c9964163c70a73 Signed-off-by:
-
Jesse Brandeburg authored
I found a code indent that was avoidable because a whole function is inside an if block, reverse the if and move the code back a tab. Change-ID: I9989c8750ee61678fbf96a3b0fd7bf7cc7ef300a Signed-off-by:
-
Jesse Brandeburg authored
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Using VFGEN_RSTAT to detect a VF reset is an endeavor that is fraught with peril. It's entirely too easy to miss a reset because none of the bits are sticky. By the time the VF driver reads the register, the reset may have been processed and cleaned up by the PF driver, leaving the register in the same state that it was before the reset. Instead, detect a reset with the VF_ARQLEN register. When the VF is reset, the enable bit in this register is cleared, and it stays cleared until the VF driver processes the reset and re-enables the admin queue. Because we now deal with multiple registers in the reset and watchdog tasks, rename the rstat_val variable to reg_val. Change-ID: Id1df17045c0992e607da0162d31807f7fc20d199 Signed-off-by:
-
Greg Bowers authored
Changes parsing of AQ command Get CEE DCBX OPER CFG (0x0A07). Change is required because FW creates the oper_prio_tc nibbles reversed from those in the CEE Priority Group sub-TLV. Change-ID: I7d9d8641bb430d30e286fc3fac909866ef8a0de8 Signed-off-by:
Greg Bowers <gregory.j.bowers@intel.com> Tested-by:
-
Serey Kong authored
Ran into an issue where PF's VSI type list was different from VF's, which was resulted in different enum index. The VSI type list can be different depending on what build flag is used for PF and VF. The change is to explicitly assign enum index for each VSI type so that PF and VF always reference to the same VSI type event if the enum lists are different. Change-ID: I8c0e5fdb515f324f7964df863a458073cf467e57 Signed-off-by:
Serey Kong <serey.kong@intel.com> Tested-by:
-
Shannon Nelson authored
There's been some need for controlling the periodic link polling for debugging link issues. This patch enables switching it off and on through an ethtool private flag. The link poll remains on by default, but can be turned off with ethtool --set-priv-flags p261p1 LinkPolling off and later turned back on with ethtool --set-priv-flags p261p1 LinkPolling on To check the current status, use ethtool --show-priv-flags p261p1 Change-ID: I32e4ab654ff3eec90a06cf144899971b82d71c40 Signed-off-by:
-
Matt Jared authored
This patch addresses an issue where multiple link up messages can be logged resulting from aq link status timing when link properties are changed (fc, speed, etc.); solved by using a single function to handle status printing and adding a mechanism to track whether link state (up or down) has actually changed. Change-ID: Ied6ed6e49dc397c77d992adc0bc9ed3767152b9d Signed-off-by:
Matt Jared <matthew.a.jared@intel.com> Tested-by:
-
