- 16 Nov, 2020 34 commits
-
-
Hans Verkuil authored
The vivid driver is a bit flaky w.r.t. the kthread timing, esp. when running inside a virtual machine. This is caused by calling schedule_timeout_uninterruptible(1) which can actually take more than one jiffie. A while loop with schedule() turns out to be a lot more precise. Also, if mutex_trylock() fails, then just call schedule() instead of schedule_timeout_uninterruptible(1). There is no need to wait until the next jiffer, just schedule(), then try to get the lock again. This is still not precise enough, it is still relatively easy to get missed frames. This really should be converted to use a proper timer, but for now this solves the worst problems. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Colin Ian King authored
There is a spelling mistake in a pci_err error message. Fix this and make the error message a little more meaningful. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hans Verkuil authored
The description of the V4L2_COLORSPACE_470_SYSTEM_BG stated that it was superseded by SMPTE 170M. That is incorrect. The probably root cause of this is that the HDMI standard does not support this colorspace and, unless otherwise signaled, will fall back to SMPTE 170M for SDTV. However, EBU Tech. 3321 states that sources should signal Rec. 709 as the colorimetry when using HDMI since the difference between Rec. 709 and Tech. 3213 are negligible. Update the text accordingly. Also drop a spurious " at the end of the Tech 3213 title in the bibliography. Signed-off-by:
-
Ezequiel Garcia authored
In preparation for making the interface public, document all the structures. Special care is taken to annotate those fields that depart from the H264 syntax. This commit only adds documentation and doesn't affect functionality in any way. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
The quantization handling is already documented in the file rkisp1.rst so this item can be removed. Fixes: 66167269 (media: staging: rkisp1: allow quantization setting by userspace on the isp source pad) Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Niklas Söderlund authored
The mandatory compatible value 'renesas,rcar-gen2-vin' was added to all Gen2 DTS files in 2017, remove the redundant device specific values from the driver. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
YueHaibing authored
If CONFIG_PM is n, gcc warns: drivers/media/platform/marvell-ccic/mmp-driver.c:324:12: warning: ‘mmpcam_runtime_suspend’ defined but not used [-Wunused-function] static int mmpcam_runtime_suspend(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~~ drivers/media/platform/marvell-ccic/mmp-driver.c:310:12: warning: ‘mmpcam_runtime_resume’ defined but not used [-Wunused-function] static int mmpcam_runtime_resume(struct device *dev) ^~~~~~~~~~~~~~~~~~~~~ Mark them as __maybe_unused to fix this. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
Julia Lawall authored
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Arnd Bergmann authored
There are no remaining conversions in v4l2_compat_ioctl32(), so all the infrastructure for it can be removed, with the only remaining bit being the compat_ioctl32() callback into drivers that implement their own incompatible data structures. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
There are eight remaining ioctl commands handled by copying incompatible data structures in v4l2_compat_ioctl32(), all of them fairly simple. Change them to instead go through the native ioctl infrastructure and only special-case the data copy. Signed-off-by:
-
Arnd Bergmann authored
Now that the 'clips' array is accessed by common code in the native ioctl handler, the same can be done for the compat version, greatly simplifying the compat code for these four ioctl commands. [hverkuil: fix: CHECK: Alignment should match open parenthesis] Signed-off-by:
-
Arnd Bergmann authored
The v4l2_format based ioctls can have an indirect pointer to an array of v4l2_clip structures for overlay mode, depending on the 'type' member. There are only five drivers that use the overlay mode and copy the data through the __user pointer. Change the five drivers to use memcpy() instead, and copy the data in common code using the check_array_args() helpers. This allows for a subsequent patch that use the same mechanism for compat ioctl handlers. Note that there is another pointer for a 'bitmap' that is only used in the 'vivid' driver and nowhere else. There is no easy way to use the same trick without adding complexity to the common code, so this remains a __user pointer. [hverkuil: fix: CHECK: spaces preferred around that '*' (ctx:VxV)] [hverkuil: fix: CHECK: Alignment should match open parenthesis] Signed-off-by:
-
Arnd Bergmann authored
The ioctl commands based on v4l2_buffer have two sets of compat calls, one for native time32 structures, and one for compat structures on 64-bit architectures. Change the compat version to use the same approach as the other simpler one, for both versions of the structure. In an earlier version of the patch, I unified the v4l2_buffer_time32 and v4l2_buffer32_time32 compatibility handling into a single implementation, but that relied on having it all in one file, rather than having the in_compat_syscall() version in v4l2-compat-ioctl32.c. [hverkuil: fix various trivial checkpatch issues] Signed-off-by:
-
Arnd Bergmann authored
The v4l2_ext_controls ioctl handlers use an indirect pointer to an incompatible data structure, making the conversion particularly tricky. Moving the compat implementation to use the new v4l2_compat_get_user()/v4l2_compat_put_user() helpers makes it noticeably simpler. In v4l2_compat_get_array_args()/v4l2_compat_put_array_args(), the 'file' argument needs to get passed to determine the exact format, which is a bit unfortunate, as no other conversion needs these. [hverkuil: fix: WARNING: Missing a blank line after declarations] [hverkuil: fix: CHECK: Please don't use multiple blank lines] Signed-off-by:
-
Arnd Bergmann authored
These seven commands are all compatible and do not need any conversion handlers. The existing ones just copy 32-bit integers around, and those are always compatible. Signed-off-by:
-
Arnd Bergmann authored
The v4l2-compat-ioctl32() currently takes an extra round trip through user space pointers when converting the data structure formats. In particular, this involves using the compat_alloc_user_space() and copy_in_user() helpers that often lead to worse compat handlers compared to using in_compat_syscall() checks when copying the data. The native implementation already gained a simpler method to deal with the conversion for the time32 conversion. Hook into the same places to provide a location for reading and writing user space data from inside of the generic video_usercopy() helper. Hans Verkuil rewrote the video_get_user() function here to simplify the zeroing of the extra input fields and fixed a couple of bugs in the original implementation. [hverkuil: fix: CHECK: Please don't use multiple blank lines] Co-developed-by:
-
- 25 Oct, 2020 6 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
