When Independent-HP mode is changed for VIA, the driver needs to
re-issue the auto-mute check so that the line-out pins are set properly
without influence of HP pin state.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the line-jack is plugged/unplugged, the driver must check also
the headphone jack state in addition to the line-out jack.  Currently
it checks only the line-out state and ignores the headphone.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of checking the model quirk, use a fixup table for workaround
of 44kHz-fixed PCM for Lenovo IdeaPad with ALC269.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Conflicts:
	sound/pci/hda/patch_realtek.c

It's harmless but annyoing.
  sound/pci/hda/patch_realtek.c: In function ‘alc_cap_getput_caller’:
  sound/pci/hda/patch_realtek.c:2722:9: warning: ‘err’ may be used uninitialized in this function
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now all alc*_parse_auto_config() do almost same thing except for the
NID list to ignore and the PINs for SSID-check, we can merge all these
to a single function.  A good amount of code reduction.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Finally the last one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

One more code reduction.  This codec has less DACs, thus the wiring
to DAC can't be filled uniquely for all output pins, i.e. some outputs
share the same volume control.
Except for that, all seems working fine.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now coming to ALC268/269 parser codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge more auto-parser code in patch_realtek.c, now for ALC861.
The topology of this codec is pretty simple, and can be parsed well
by the current starndard parser.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

query_amp_caps() may return non-zero if the amp cap isn't supported
by the codec.  Thus one needs to check widget-caps first, then check
the corresponding amp-caps.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The existing standard auto-parser can work well with this codec, too.
Let's merge.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

A regression fix from commit 21268961
  ALSA: hda - More flexible dynamic-ADC switching for Realtek codecs

The auto-mic wasn't detected properly when no ADC-switch is needed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For VT1812, add dac_mixer_idx for initialization.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Typical off-by-one thinko.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Remove redundant definitions.  Ideally, all init functions should be
identical in future.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Improved the standard Realtek auto-parser to support the codec topology
like ALC680.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The BIOS provides bogus pin configs, and also invalid SSID.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For VT2002P, VT1802 and VT1812 codecs, to create Independent HP
control.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For VT2002P, VT1802 and VT1812 codecs, there're only two DACs. So smart51
control shouldn't be created.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For VT2002P, VT1802 and VT1812 codecs, the original activate_output_path()
function can't initialize output and hp path correctly, since mixers connected to
output pin widgets are not considered. So modify the activate_output_path()
function to satisify this kind of codec.
Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Put the all static quirk codes out of patch_realtek.c, split into the
file for each codec model.  For controlling the build of quirk codes,
a new Kconfig, CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS is introduced.
By setting this off, all quirk codes won't be built, thus you can save
lots of memory.

The codes in patch_realtek.c are also shuffled and more comments are
given, but the contents aren't changed.  This is just a refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Avoid open-codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch changes the auto-parser and the auto-mic handling codes to
allow more flexible dynamic ADC-switching with Realtek codecs.

In the new code, the following strategy is taken:

- When a cap-src can't handle all input-sources, either skip it, or
  switch to the ADC-switching mode.  In ADC-switching mode, like the
  former dual-ADC mode for ALC275, it changes ADC on the fly according
  to the current input source.
- When auto-mic is possible, always assign imux.  If the mic pins are
  set statically via a quirk, rebuild imux according to the pins.
  In the auto-mic mode, the driver always changes the imux (although
  the imux isn't exposed as a mixer element).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The digital out pin on ALC882 may have multiple connections.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of assigning each default hda_pcm_stream pointers, do NULL-checks
and assign default values in alc_build_pcms().
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The only different implmentation was alc880_auto_init_input_src(),
and now it covers this variant, and we can use the single function
for all codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now with the new code for looking for ADCs and MUXs, we can replace
the whole ADC assignment with the parsed results.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

All alc*_auto_init_analog_input() calls are identical, so let's use
the same function more clearly without aliases.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Parse ADCs and cap-srcs in alc_auto_create_input_ctls() by itself
instead of passing explicitly from the caller.  By this change, all
alc*_auto_create_input_ctls() can be unified to the same calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the same common code for auto-parsing the output paths and their
initializations, based on the existing ALC662 code, which is smarter
than the old ALC880/2 code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When multiple inputs are present on the mixer widget (typically a DAC
and a loopback), mute/unmute both inputs with the corresponding mixer
element.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The initialization of DACs was missing in ALC662 parser code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In alc662_auto_fill_dac_nids(), the HP and speaker DACs aren't parsed
when the corresponding pins aren't fixed with single DACs.
Now check these DACs even for non-fixed pins.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the dual-adc switching mode is active in Realtek auto-parser,
we need to couple all ADCs as a single capture-volume.  Currently, the
volume control changes only the first ADC, thus others may remain silent.
This patch fixes the problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the support of ALC269VC codec.
Also delete the unnecessary codec_variant type enum list:
now only three variants (ALC269VA ALC269VB ALC269VC) are needed.

In addition, added some aliases:
 - Add ALC269VB alias name ALC277
 - Add ALC269VC alias name ALC259 ALC281X
 - Add ALC269VC for Lenovo device 0x21f3 name ALC3202
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since we now route the front DAC via aa-mix widget, adding the aa-mix
to surrounds will result in a mix-up of both front and surround PCM
signals.  For avoiding this, the aa-mix routes have to be disabled
for surround paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

When the individual DAC is available for the headphone output, the driver
should create the DAC for its volume control.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>