- 17 May, 2010 8 commits
-
-
Thomas Abraham authored
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_p100' clock. 2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_p100 with clk_pclk_msys clock. 4. Adds clk_pclk_msys into list of clocks to be registered. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h133' clock. 2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'. 3. Replace all usage of clk_h133 with clk_hclk_psys clock. 4. Adds clk_hclk_psys into list of clocks to be registered. 5. Removes the clock rate calculation of hclk133 and replaces it with code that derives the HCLK PSYS clock rate from the clk_hclk_psys clock. 6. Modify printing of the system clock rates. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of type 'struct clk' whereas on S5PV210, this clock is suitable to be of type clksrc_clk clock (since it has a choice of clock source and a pre-divider). So this patch replaces the 'struct clk' type clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock. This patch modifies the following. 1. Remove definitions and usage of 'clk_h166' clock. 2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock sources for the DSYS HCLK clock. 3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'. 4. Replace all usage of clk_h166 with clk_hclk_dsys clock. 5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to be registered. 6. Removes the clock rate calculation of hclk166 and replaces it with code that derives the HCLK DSYS clock rate from the clk_hclk_dsys clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
The clk_h200 represents the HCLK for the MSYS domain. This clock is of type 'struct clk' but on V210, it is more suitable to be of type 'struct clksrc_clk' (since it is a divided version of the armclk). The replacement clock is renamed as clk_hclk_msys to indicate that it represents the HCLK for MSYS domain. This patch modifies the following. 1. Removes the usage of the clk_h200 clock. 2. Adds the new clock 'clk_hclk_msys'. 3. Adds clk_hclk_msys to the list of sysclks to be registered. 4. Modifies the hclk_msys clock rate calculation procedure to be based on the new clk_hclk_msys clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
This patch modifies the following. 1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type. 2. Adds arm clock to the list of system clocks 'sysclks' for registering it along with other system clocks. 3. Modifies the armclk clock rate calculation procedure to be based on the new clk_armclk clock. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
The assignment of clock rates for fout apll/mpll/epll is moved further up in the s5pv210_setup_clocks function because the subsequent patches require the clock rate of fout clocks to be setup. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
This patch modifies the following. 1. Registers the mout_apll clksrc_clk clock. 2. The mout_mpll and mout_epll clocks were registered as 'struct clk' types and then their parents were setup using the s3c_set_clksrc function. This patch reduces the two steps into one by registering the mout_mpll and mout_epll clocks using the s3c_register_clksrc function. 3. As per point 2 above, the init_parents array is no longer required. So the mout clocks are now put together in a new array named 'sysclks'. The sysclks array will list the system level clocks and more clocks will be added to it in the subsequent patches. 4. The clks array is left empty because of the movement of mpll and epll clocks into the sysclks array. It is not deleted since subsequent patches will add clocks into this array. Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com> Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
Thomas Abraham authored
The system clock definitions are currently defined below the peripheral clock definitions in the V210 clock code. For the V210 clock updates that follow this patch, it is required that the system clock definitions such as the mout_apll and mout_mpll be defined prior to the device clock definitions. This patch re-arranges the system clock defintions for the clock updates that follow this patch. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
-
- 05 May, 2010 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/legacy: only enable load detection property on DVI-I drm/radeon/kms: fix panel scaling adjusted mode setup drivers/gpu/drm/drm_sysfs.c: sysfs files error handling drivers/gpu/drm/radeon/radeon_atombios.c: range check issues gpu: vga_switcheroo, fix lock imbalance drivers/gpu/drm/drm_memory.c: fix check for end of loop drivers/gpu/drm/via/via_video.c: fix off by one issue drm/radeon/kms/agp The wrong AGP chipset can cause a NULL pointer dereference drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfill
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: powernow-k8: Fix frequency reporting x86: Fix parse_reservetop() build failure on certain configs x86: Fix NULL pointer access in irq_force_complete_move() for Xen guests x86: Fix 'reservetop=' functionality
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: KEYS: Fix RCU handling in key_gc_keyring() KEYS: Fix an RCU warning in the reading of user keys
-
David Howells authored
key_gc_keyring() needs to either hold the RCU read lock or hold the keyring semaphore if it's going to scan the keyring's list. Given that it only needs to read the key list, and it's doing so under a spinlock, the RCU read lock is the thing to use. Furthermore, the RCU check added in e7b0a61b is incorrect as holding the spinlock on key_serial_lock is not grounds for assuming a keyring's pointer list can be read safely. Instead, a simple rcu_dereference() inside of the previously mentioned RCU read lock is what we want. Reported-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
David Howells authored
Fix an RCU warning in the reading of user keys: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/user_defined.c:202 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by keyctl/3637: #0: (&key->sem){+++++.}, at: [<ffffffff811a80ae>] keyctl_read_key+0x9c/0xcf stack backtrace: Pid: 3637, comm: keyctl Not tainted 2.6.34-rc5-cachefs #18 Call Trace: [<ffffffff81051f6c>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff811aa55f>] user_read+0x47/0x91 [<ffffffff811a80be>] keyctl_read_key+0xac/0xcf [<ffffffff811a8a06>] sys_keyctl+0x75/0xb7 [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Alex Deucher authored
DVI-D doesn't have analog. This matches the avivo behavior. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
This should duplicate exactly what the ddx does for both legacy and avivo. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 04 May, 2010 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Avoid a gcc warning in ocfs2_wipe_inode(). ocfs2: Avoid direct write if we fall back to buffered I/O ocfs2_dlmfs: Fix math error when reading LVB. ocfs2: Update VFS inode's id info after reflink. ocfs2: potential ERR_PTR dereference on error paths ocfs2: Add directory entry later in ocfs2_symlink() and ocfs2_mknod() ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod error path ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_symlink error path ocfs2: add OCFS2_INODE_SKIP_ORPHAN_DIR flag and honor it in the inode wipe code ocfs2: Reset status if we want to restart file extension. ocfs2: Compute metaecc for superblocks during online resize. ocfs2: Check the owner of a lockres inside the spinlock ocfs2: one more warning fix in ocfs2_file_aio_write(), v2 ocfs2_dlmfs: User DLM_* when decoding file open flags.
-
David Howells authored
The x86_64 call_rwsem_wait() treats the active state counter part of the R/W semaphore state as being 16-bit when it's actually 32-bit (it's half of the 64-bit state). It should do "decl %edx" not "decw %dx". Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: Use per-adapter userspace device lists i2c: Fix probing of FSC hardware monitoring chips i2c-core: Erase pointer to clientdata on removal
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix resource leak in failure path of perf_event_open()
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Fix RCU lockdep splat on freezer_fork path rcu: Fix RCU lockdep splat in set_task_cpu on fork path mutex: Don't spin when the owner CPU is offline or other weird cases
-
Jean Delvare authored
Using a single list for all userspace devices leads to a dead lock on multiplexed buses in some circumstances (mux chip instantiated from userspace). This is solved by using a separate list for each bus segment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
-
Jean Delvare authored
Some FSC hardware monitoring chips (Syleus at least) doesn't like quick writes we typically use to probe for I2C chips. Use a regular byte read instead for the address they live at (0x73). These are the only known chips living at this address on PC systems. For clarity, this fix should not be needed for kernels 2.6.30 and later, as we started instantiating the hwmon devices explicitly based on DMI data. Still, this fix is valuable in the following two cases: * Support for recent FSC chips on older kernels. The DMI-based device instantiation is more difficult to backport than the device support itself. * Case where the DMI-based device instantiation fails, whatever the reason. We fall back to probing in that case, so it should work. This fixes kernel bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org
-
Wolfram Sang authored
After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Joel Becker authored
gcc warns that a variable is uninitialized. It's actually handled, but an early return fools gcc. Let's just initialize the variable to a garbage value that will crash if the usage is ever broken. Signed-off-by: Joel Becker <joel.becker@oracle.com>
-
- 03 May, 2010 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: remove bad auth_x kmem_cache ceph: fix lockless caps check ceph: clear dir complete, invalidate dentry on replayed rename ceph: fix direct io truncate offset ceph: discard incoming messages with bad seq # ceph: fix seq counting for skipped messages ceph: add missing #includes ceph: fix leaked spinlock during mds reconnect ceph: print more useful version info on module load ceph: fix snap realm splits ceph: clear dir complete on d_move
-
Sage Weil authored
It's useless, since our allocations are already a power of 2. And it was allocated per-instance (not globally), which caused a name collision when we tried to mount a second file system with auth_x enabled. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The __ variant requires caller to hold i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
truncate_inode_pages_range wants the end offset to align with the last byte in a page. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
We can get old message seq #'s after a tcp reconnect for stateful sessions (i.e., the MDS). If we get a higher seq #, that is an error, and we shouldn't see any bad seq #'s for stateless (mon, osd) connections. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Increment in_seq even when the message is skipped for some reason. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Decouple the client version from the server side. Print relevant protocol and map version info instead. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The snap realm split was checking i_snap_realm, not the list_head, to determine if an inode belonged in the new realm. The check always failed, which meant we always moved the inode, corrupting the old realm's list and causing various crashes. Also wait to release old realm reference to avoid possibility of use after free. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by: Sage Weil <sage@newdream.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
-
Ryusuke Konishi authored
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. And nilfs does not set s_bdi anywhere. I noticed this problem by the warning introduced by the recent commit 5129a469 ("Catch filesystem lacking s_bdi"). WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e() Hardware name: PowerEdge 2850 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38 Call Trace: [<c1028422>] warn_slowpath_common+0x60/0x90 [<c102845f>] warn_slowpath_null+0xd/0x10 [<c1095936>] vfs_kern_mount+0xc5/0x14e [<c1095a03>] do_kern_mount+0x32/0xbd [<c10a811e>] do_mount+0x671/0x6d0 [<c1073794>] ? __get_free_pages+0x1f/0x21 [<c10a684f>] ? copy_mount_options+0x2b/0xe2 [<c107b634>] ? strndup_user+0x48/0x67 [<c10a81de>] sys_mount+0x61/0x8f [<c100280c>] sysenter_do_call+0x12/0x32 This ensures to set s_bdi for nilfs and fixes the sync silent failure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mark Langsdorf authored
With F10, model 10, all valid frequencies are in the ACPI _PST table. Cc: <stable@kernel.org> # 33.x 32.x Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> LKML-Reference: <1270065406-1814-6-git-send-email-bp@amd64.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Wim Van Sebroeck authored
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-