- 10 Jan, 2022 1 commit
-
-
Paul Blakey authored
Netfilter conntrack maintains NAT flags per connection indicating whether NAT was configured for the connection. Openvswitch maintains NAT flags on the per packet flow key ct_state field, indicating whether NAT was actually executed on the packet. When a packet misses from tc to ovs the conntrack NAT flags are set. However, NAT was not necessarily executed on the packet because the connection's state might still be in NEW state. As such, openvswitch wrongly assumes that NAT was executed and sets an incorrect flow key NAT flags. Fix this, by flagging to openvswitch which NAT was actually done in act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so the packet flow key NAT flags will be correctly set. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 09 Jan, 2022 5 commits
-
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-01-09 The first patch is by Johan Hovold and fixes a mem leak in the error path of the softing_cs driver. The next patch is by me and fixes a set but not used variable warning in the softing driver. Jiasheng Jiang's patch for the xilinx_can driver adds the missing error checking when getting the IRQ. Lad Prabhakar contributes a patch for the rcar_canfd driver to fix a mem leak in the error path. The last patch is by Brian Silverman and properly initializes the send USB messages to avoid spurious CAN error frames. * tag 'linux-can-fixes-for-5.16-20220109' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved} can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device can: xilinx_can: xcan_probe(): check for error irq can: softing: softing_startstop(): fix set but not used variable warning can: softing_cs: softingcs_probe(): fix memleak on registration failure ==================== Link: https://lore.kernel.org/r/20220109134040.1945428-1-mkl@pengutronix.deSigned-off-by:
-
Brian Silverman authored
No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by:
Brian Silverman <brian.silverman@bluerivertech.com> [mkl: initialize the reserved member, too] Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Lad Prabhakar authored
Make sure we free CAN network device in the error path. There are several jumps to fail label after allocating the CAN network device successfully. This patch places the free_candev() under fail label so that in failure path a jump to fail label frees the CAN network device. Fixes: 76e9353a ("can: rcar_canfd: Add support for RZ/G2L family") Link: https://lore.kernel.org/all/20220106114801.20563-1-prabhakar.mahadev-lad.rj@bp.renesas.comReported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jiasheng Jiang authored
For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: b1201e44 ("can: xilinx CAN controller support") Link: https://lore.kernel.org/all/20211224021324.1447494-1-jiasheng@iscas.ac.cnSigned-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
Marc Kleine-Budde authored
In the function softing_startstop() the variable error_reporting is assigned but not used. The code that uses this variable is commented out. Its stated that the functionality is not finally verified. To fix the warning: | drivers/net/can/softing/softing_fw.c:424:9: error: variable 'error_reporting' set but not used [-Werror,-Wunused-but-set-variable] remove the comment, activate the code, but add a "0 &&" to the if expression and rely on the optimizer rather than the preprocessor to remove the code. Link: https://lore.kernel.org/all/20220109103126.1872833-1-mkl@pengutronix.de Fixes: 03fd3cf5 ("can: add driver for Softing card") Cc: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by:
-
- 08 Jan, 2022 2 commits
-
-
Johan Hovold authored
In case device registration fails during probe, the driver state and the embedded platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). Fixes: 0a0b7a5f ("can: add driver for Softing card") Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org Cc: stable@vger.kernel.org # 2.6.38 Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sunil Goutham authored
Fixed interrupt name string logic which currently results in wrong memory location being accessed while dumping /proc/interrupts. Fixes: 48260907 ("octeontx2-af: Enable CPT HW interrupts") Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/1641538505-28367-1-git-send-email-sbhatta@marvell.comSigned-off-by:
-
- 07 Jan, 2022 22 commits
-
-
Dan Carpenter authored
This needs to copy an unsigned int from user space instead of a long to avoid breaking user space with an API change. I have updated all the integer overflow checks from ULONG to UINT as well. This is a slight API change but I do not expect it to affect anything in real life. Fixes: 3087a6f3 ("netrom: fix copying in user data in nr_setsockopt") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "opt" variable is unsigned long but we only copy 4 bytes from the user so the lower 4 bytes are uninitialized. I have changed the integer overflow checks from ULONG to UINT as well. This is a slight API change but I don't expect it to break anything. Fixes: a7b75c5a ("net: pass a sockptr_t into ->setsockopt") Signed-off-by:
-
David S. Miller authored
Subbaraya Sundeep says: ==================== octeontx2: Fix PTP bugs This patchset addresses two problems found when using ptp. Patch 1 - Increases the refcount of ptp device before use which was missing and it lead to refcount increment after use bug when module is loaded and unloaded couple of times. Patch 2 - PTP resources allocated by VF are not being freed during VF teardown. This patch fixes that. ==================== Signed-off-by: -
Rakesh Babu Saladi authored
When a VF is removed respective PTP resources are not being freed currently. This patch fixes it. Fixes: 43510ef4 ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF") Signed-off-by:
Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
Before using the ptp pci device by AF driver increment the reference count of it. Fixes: a8b90c9d ("octeontx2-af: Add PTP device id for CN10K and 95O silcons") Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Fixes for buffer reclaim and option writing Here are three fixes dealing with a syzkaller crash MPTCP triggers in the memory manager in 5.16-rc8, and some option writing problems. Patches 1 and 2 fix some corner cases in MPTCP option writing. Patch 3 addresses a crash that syzkaller found a way to trigger in the mm subsystem by passing an invalid value to __sk_mem_reduce_allocated(). ==================== Signed-off-by: -
Mat Martineau authored
syzbot found a page counter underflow that was triggered by MPTCP's reclaim code: page_counter underflow: -4294964789 nr_pages=4294967295 WARNING: CPU: 2 PID: 3785 at mm/page_counter.c:56 page_counter_cancel+0xcf/0xe0 mm/page_counter.c:56 Modules linked in: CPU: 2 PID: 3785 Comm: kworker/2:6 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:page_counter_cancel+0xcf/0xe0 mm/page_counter.c:56 Code: c7 04 24 00 00 00 00 45 31 f6 eb 97 e8 2a 2b b5 ff 4c 89 ea 48 89 ee 48 c7 c7 00 9e b8 89 c6 05 a0 c1 ba 0b 01 e8 95 e4 4b 07 <0f> 0b eb a8 4c 89 e7 e8 25 5a fb ff eb c7 0f 1f 00 41 56 41 55 49 RSP: 0018:ffffc90002d4f918 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff88806a494120 RCX: 0000000000000000 RDX: ffff8880688c41c0 RSI: ffffffff815e8f28 RDI: fffff520005a9f15 RBP: ffffffff000009cb R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815e2cfe R11: 0000000000000000 R12: ffff88806a494120 R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de21000 CR3: 000000005ad59000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> page_counter_uncharge+0x2e/0x60 mm/page_counter.c:160 drain_stock+0xc1/0x180 mm/memcontrol.c:2219 refill_stock+0x139/0x2f0 mm/memcontrol.c:2271 __sk_mem_reduce_allocated+0x24d/0x550 net/core/sock.c:2945 __mptcp_rmem_reclaim net/mptcp/protocol.c:167 [inline] __mptcp_mem_reclaim_partial+0x124/0x410 net/mptcp/protocol.c:975 mptcp_mem_reclaim_partial net/mptcp/protocol.c:982 [inline] mptcp_alloc_tx_skb net/mptcp/protocol.c:1212 [inline] mptcp_sendmsg_frag+0x18c6/0x2190 net/mptcp/protocol.c:1279 __mptcp_push_pending+0x232/0x720 net/mptcp/protocol.c:1545 mptcp_release_cb+0xfe/0x200 net/mptcp/protocol.c:2975 release_sock+0xb4/0x1b0 net/core/sock.c:3306 mptcp_worker+0x51e/0xc10 net/mptcp/protocol.c:2443 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> __mptcp_mem_reclaim_partial() could call __mptcp_rmem_reclaim() with a negative value, which passed that negative value to __sk_mem_reduce_allocated() and triggered the splat above. Check for a reclaim amount that is positive and large enough for __mptcp_rmem_reclaim() to actually adjust rmem_fwd_alloc (much like the sk_mem_reclaim_partial() code the function is based on). v2: Use '>' instead of '>=', since SK_MEM_QUANTUM - 1 would get right-shifted into nothing by __mptcp_rmem_reclaim. Fixes: 6511882c ("mptcp: allocate fwd memory separately on the rx and tx path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/252 Reported-and-tested-by: syzbot+bc9e2d2dbcb347dd215a@syzkaller.appspotmail.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
'ptr += 1;' was omitted in the original code. If the DSS is the last option -- which is what we have most of the time -- that's not an issue. But it is if we need to send something else after like a RM_ADDR or an MP_PRIO. Fixes: 1bff1e43 ("mptcp: optimize out option generation") Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
-
Matthieu Baerts authored
When these two options had to be sent -- which is not common -- the DSS size was not being taken into account in the remaining size. Additionally in this situation, the reported size was only the one of the MP_FAIL which can cause issue if at the end, we need to write more in the TCP options than previously said. Here we use a dedicated variable for MP_FAIL size to keep the WARN_ON_ONCE() just after. Fixes: c25aeb4e ("mptcp: MP_FAIL suboption sending") Acked-and-tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2022-01-06 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong. 2) Use socat in netfilter selftests, from Hangbin Liu. 3) Skip layer checksum 4 update for IP fragments. 4) Missing allocation of pcpu scratch maps on clone in nft_set_pipapo, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone netfilter: nft_payload: do not update layer 4 checksum when mangling fragments selftests: netfilter: switch to socat for tests using -q option netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check() ==================== Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.orgSigned-off-by:
-
Moshe Shemesh authored
This reverts commit 410bd754. The reverted commit had added a retry mechanism to the command entry index allocation. The previous patch ensures that there is a free command entry index once the command work handler holds the command semaphore. Thus the retry mechanism is not needed. Fixes: 410bd754 ("net/mlx5: Add retry mechanism to the command entry index allocation") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Moshe Shemesh authored
Avoid a race where command work handler may fail to allocate command entry index, by holding the command semaphore down till command entry index is being freed. Fixes: 410bd754 ("net/mlx5: Add retry mechanism to the command entry index allocation") Signed-off-by:
-
Maor Dickman authored
Currently during NIC profile disablement all VXLAN udp ports offloaded to the HW are flushed and during its enablement the driver send notification to the stack to inform the core that the entire UDP tunnel port state has been lost, uplink representor doesn't have the same behavior which can cause VXLAN udp ports offload to be in bad state while moving between modes while VXLAN interface exist. Fixed by aligning the uplink representor profile behavior to the NIC behavior. Fixes: 84db6612 ("net/mlx5e: Move set vxlan nic info to profile init") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Shay Drory authored
Even when SF devices are supported, the SF device table allocation can still fail. In such case mlx5_sf_dev_supported still reports true, but SF device table is invalid. This can result in NULL table access. Hence, fix it by adding NULL table check. Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
Paul Blakey authored
Tunnel device follows RFC 6040, and during decapsulation inner ip_ecn might change depending on inner and outer ip_ecn as follows: +---------+----------------------------------------+ |Arriving | Arriving Outer Header | | Inner +---------+---------+---------+----------+ | Header | Not-ECT | ECT(0) | ECT(1) | CE | +---------+---------+---------+---------+----------+ | Not-ECT | Not-ECT | Not-ECT | Not-ECT | <drop> | | ECT(0) | ECT(0) | ECT(0) | ECT(1) | CE* | | ECT(1) | ECT(1) | ECT(1) | ECT(1)* | CE* | | CE | CE | CE | CE | CE | +---------+---------+---------+---------+----------+ Cells marked above are changed from original inner packet ip_ecn value. Tc then matches on the modified inner ip_ecn, but hw offload which matches the inner ip_ecn value before decap, will fail. Fix that by mapping all the cases of outer and inner ip_ecn matching, and only supporting cases where we know inner wouldn't be changed by decap, or in the outer ip_ecn=CE case, inner ip_ecn didn't matter. Fixes: bcef735c ("net/mlx5e: Offload TC matching on tos/ttl for ip tunnels") Signed-off-by:
Oz Shlomo <ozsh@nvidia.com> Reviewed-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
-
Aya Levin authored
This reverts commit 54e1217b. Although the NIC doesn't support offload of outer header CSUM, using gso_partial_features allows offloading the tunnel's segmentation. The driver relies on the stack CSUM calculation of the outer header. For this, NETIF_F_GSO_GRE_CSUM must be a member of the device's features. Fixes: 54e1217b ("net/mlx5e: Block offload of outer header csum for GRE tunnel") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
-
Aya Levin authored
This reverts commit 6d6727dd. Although the NIC doesn't support offload of outer header CSUM, using gso_partial_features allows offloading the tunnel's segmentation. The driver relies on the stack CSUM calculation of the outer header. For this, NETIF_F_GSO_UDP_TUNNEL_CSUM must be a member of the device's features. Fixes: 6d6727dd ("net/mlx5e: Block offload of outer header csum for UDP tunnels") Signed-off-by:
-
Maor Dickman authored
Routes with nexthop objects is currently not supported by multipath offload and any attempts to use it is blocked, however this also block adding SW routes with nexthop. Resolve this by returning NOTIFY_DONE instead of an error which will allow such a route to be created in SW but not offloaded. This fix also solve an issue which block adding such routes on different devices due to missing check if the route FIB device is one of multipath devices. Fixes: 6a87afc0 ("mlx5: Fail attempts to use routes with nexthop objects") Signed-off-by:
-
Maor Dickman authored
Creating routes with nexthop objects while in switchdev mode leads to access to un-allocated memory and trigger bellow call trace due to hitting WARN_ON. This is caused due to illegal usage of fib_info_nh in TC tunnel FIB event handling to resolve the FIB device while fib_info built in with nexthop. Fixed by ignoring attempts to use nexthop objects with routes until support can be properly added. WARNING: CPU: 1 PID: 1724 at include/net/nexthop.h:468 mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core] CPU: 1 PID: 1724 Comm: ip Not tainted 5.15.0_for_upstream_min_debug_2021_11_09_02_04 #1 RIP: 0010:mlx5e_tc_tun_fib_event+0x448/0x570 [mlx5_core] RSP: 0018:ffff8881349f7910 EFLAGS: 00010202 RAX: ffff8881492f1980 RBX: ffff8881349f79e8 RCX: 0000000000000000 RDX: ffff8881349f79e8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8881349f7950 R08: 00000000000000fe R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88811e9d0000 R13: ffff88810eb62000 R14: ffff888106710268 R15: 0000000000000018 FS: 00007f1d5ca6e800(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffedba44ff8 CR3: 0000000129808004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> atomic_notifier_call_chain+0x42/0x60 call_fib_notifiers+0x21/0x40 fib_table_insert+0x479/0x6d0 ? try_charge_memcg+0x480/0x6d0 inet_rtm_newroute+0x65/0xb0 rtnetlink_rcv_msg+0x2af/0x360 ? page_add_file_rmap+0x13/0x130 ? do_set_pte+0xcd/0x120 ? rtnl_calcit.isra.0+0x120/0x120 netlink_rcv_skb+0x4e/0xf0 netlink_unicast+0x1ee/0x2b0 netlink_sendmsg+0x22e/0x460 sock_sendmsg+0x33/0x40 ____sys_sendmsg+0x1d1/0x1f0 ___sys_sendmsg+0xab/0xf0 ? __mod_memcg_lruvec_state+0x40/0x60 ? __mod_lruvec_page_state+0x95/0xd0 ? page_add_new_anon_rmap+0x4e/0xf0 ? __handle_mm_fault+0xec6/0x1470 __sys_sendmsg+0x51/0x90 ? internal_get_user_pages_fast+0x480/0xa10 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 8914add2 ("net/mlx5e: Handle FIB events to update tunnel endpoint device") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
-
Dima Chumak authored
Deleting a Tc rule with multiple outputs, one of which is internal port, like this one: tc filter del dev enp8s0f0_0 ingress protocol ip pref 5 flower \ dst_mac 0c:42:a1:d1:d0:88 \ src_mac e4:ea:09:08:00:02 \ action tunnel_key set \ src_ip 0.0.0.0 \ dst_ip 7.7.7.8 \ id 8 \ dst_port 4789 \ action mirred egress mirror dev vxlan_sys_4789 pipe \ action mirred egress redirect dev enp8s0f0_1 Triggers a call trace: BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:del_sw_hw_rule+0x2b/0x1f0 [mlx5_core] Call Trace: tree_remove_node+0x16/0x30 [mlx5_core] mlx5_del_flow_rules+0x51/0x160 [mlx5_core] __mlx5_eswitch_del_rule+0x4b/0x170 [mlx5_core] mlx5e_tc_del_fdb_flow+0x295/0x550 [mlx5_core] mlx5e_flow_put+0x1f/0x70 [mlx5_core] mlx5e_delete_flower+0x286/0x390 [mlx5_core] tc_setup_cb_destroy+0xac/0x170 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x15e/0x170 [cls_flower] fl_delete+0x36/0x80 [cls_flower] tc_del_tfilter+0x3a6/0x6e0 rtnetlink_rcv_msg+0xe5/0x360 ? rtnl_calcit.isra.0+0x110/0x110 netlink_rcv_skb+0x46/0x110 netlink_unicast+0x16b/0x200 netlink_sendmsg+0x202/0x3d0 sock_sendmsg+0x33/0x40 ____sys_sendmsg+0x1c3/0x200 ? copy_msghdr_from_user+0xd6/0x150 ___sys_sendmsg+0x88/0xd0 ? ___sys_recvmsg+0x88/0xc0 ? do_futex+0x10c/0x460 __sys_sendmsg+0x59/0xa0 do_syscall_64+0x48/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix by disabling offloading for flows matching esw_is_chain_src_port_rewrite() which have more than one output. Fixes: 10742efc ("net/mlx5e: VF tunnel TX traffic offloading") Signed-off-by:Dima Chumak <dchumak@nvidia.com> Reviewed-by:
-
Aya Levin authored
Driver initiates DMA sync, hence it may skip CPU sync. Add DMA_ATTR_SKIP_CPU_SYNC as input attribute both to dma_map_page and dma_unmap_page to avoid redundant sync with the CPU. When forcing the device to work with SWIOTLB, the extra sync might cause data corruption. The driver unmaps the whole page while the hardware used just a part of the bounce buffer. So syncing overrides the entire page with bounce buffer that only partially contains real data. Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Fixes: db05815b ("net/mlx5e: Add XSK zero-copy support") Signed-off-by:
-
- 06 Jan, 2022 9 commits
-
-
Wen Gu authored
SMC connections might fail to be registered in a link group due to unable to find a usable link during its creation. As a result, smc_conn_create() will return a failure and most resources related to the connection won't be applied or initialized, such as conn->abort_work or conn->lnk. If smc_conn_free() is invoked later, it will try to access the uninitialized resources related to the connection, thus causing a warning or crash. This patch tries to fix this by resetting conn->lgr to NULL if an abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the access to uninitialized resources in smc_conn_free(). Meanwhile, the new created link group should be terminated if smc connections can't be registered in it. So smc_lgr_cleanup_early() is modified to take care of link group only and invoked to terminate unusable link group by smc_conn_create(). The call to smc_conn_free() is moved out from smc_lgr_cleanup_early() to smc_conn_abort(). Fixes: 56bc3b20 ("net/smc: assign link to a new connection") Suggested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Acked-by:
-
Jiasheng Jiang authored
As the possible failure of the allocation, the devm_ioremap() may return NULL pointer. Take tgec_initialization() as an example. If allocation fails, the params->base_addr will be NULL pointer and will be assigned to tgec->regs in tgec_config(). Then it will cause the dereference of NULL pointer in set_mac_address(), which is called by tgec_init(). Therefore, it should be better to add the sanity check after the calling of the devm_ioremap(). Fixes: 39339616 ("fsl/fman: Add FMan MAC driver") Signed-off-by:
-
Dan Carpenter authored
This code is holding the &ofdpa->flow_tbl_lock spinlock so it is not allowed to sleep. That means we have to pass the OFDPA_OP_FLAG_NOWAIT flag to ofdpa_flow_tbl_del(). Fixes: 936bd486 ("rocker: use FIB notifications instead of switchdev calls") Signed-off-by:
-
Eric Dumazet authored
It seems pretty clear ppp layer assumed user space would always be kind to provide enough data in their write() to a ppp device. This patch makes sure user provides at least 2 bytes. It adds PPP_PROTO_LEN macro that could replace in net-next many occurrences of hard-coded 2 value. I replaced only one occurrence to ease backports to stable kernels. The bug manifests in the following report: BUG: KMSAN: uninit-value in ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 ppp_send_frame+0x28d/0x27c0 drivers/net/ppp/ppp_generic.c:1740 __ppp_xmit_process+0x23e/0x4b0 drivers/net/ppp/ppp_generic.c:1640 ppp_xmit_process+0x1fe/0x480 drivers/net/ppp/ppp_generic.c:1661 ppp_write+0x5cb/0x5e0 drivers/net/ppp/ppp_generic.c:513 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] ppp_write+0x11d/0x5e0 drivers/net/ppp/ppp_generic.c:501 do_iter_write+0xb0c/0x1500 fs/read_write.c:853 vfs_writev fs/read_write.c:924 [inline] do_writev+0x645/0xe00 fs/read_write.c:967 __do_sys_writev fs/read_write.c:1040 [inline] __se_sys_writev fs/read_write.c:1037 [inline] __x64_sys_writev+0xe5/0x120 fs/read_write.c:1037 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2022-01-06 1) Fix xfrm policy lookups for ipv6 gre packets by initializing fl6_gre_key properly. From Ghalem Boudour. 2) Fix the dflt policy check on forwarding when there is no policy configured. The check was done for the wrong direction. From Nicolas Dichtel. 3) Use the correct 'struct xfrm_user_offload' when calculating netlink message lenghts in xfrm_sa_len(). From Eric Dumazet. 4) Tread inserting xfrm interface id 0 as an error. From Antony Antony. 5) Fail if xfrm state or policy is inserted with XFRMA_IF_ID 0, xfrm interfaces with id 0 are not allowed. From Antony Antony. 6) Fix inner_ipproto setting in the sec_path for tunnel mode. From Raed Salem. ==================== Signed-off-by: -
Florian Westphal authored
This is needed in case a new transaction is made that doesn't insert any new elements into an already existing set. Else, after second 'nft -f ruleset.txt', lookups in such a set will fail because ->lookup() encounters raw_cpu_ptr(m->scratch) == NULL. For the initial rule load, insertion of elements takes care of the allocation, but for rule reloads this isn't guaranteed: we might not have additions to the set. Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by:
etkaar <lists.netfilter.org@prvy.eu> Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
IP fragments do not come with the transport header, hence skip bogus layer 4 checksum updates. Fixes: 18140969 ("netfilter: nft_payload: layer 4 checksum adjustment for pseudoheader fields") Reported-and-tested-by:
Steffen Weinreich <steve@weinreich.org> Signed-off-by:
-
Hangbin Liu authored
The nc cmd(nmap-ncat) that distributed with Fedora/Red Hat does not have option -q. This make some tests failed with: nc: invalid option -- 'q' Let's switch to socat which is far more dependable. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.16-20220105' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-01-05 It consists of 2 patches, both by me. The first one fixes the use of an uninitialized variable in the gs_usb driver the other one a skb_over_panic in the ISOTP stack in case of reception of too large ISOTP messages. * tag 'linux-can-fixes-for-5.16-20220105' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: isotp: convert struct tpcon::{idx,len} to unsigned int can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data ==================== Link: https://lore.kernel.org/r/20220105205443.1274709-1-mkl@pengutronix.deSigned-off-by:
-
- 05 Jan, 2022 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski" "Networking fixes, including fixes from bpf, and WiFi. One last pull request, turns out some of the recent fixes did more harm than good. Current release - regressions: - Revert "xsk: Do not sleep in poll() when need_wakeup set", made the problem worse - Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register", broke EPROBE_DEFER handling - Revert "net: usb: r8152: Add MAC pass-through support for more Lenovo Docks", broke setups without a Lenovo dock Current release - new code bugs: - selftests: set amt.sh executable Previous releases - regressions: - batman-adv: mcast: don't send link-local multicast to mcast routers Previous releases - always broken: - ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY - sctp: hold endpoint before calling cb in sctp_transport_lookup_process - mac80211: mesh: embed mesh_paths and mpp_paths into ieee80211_if_mesh to avoid complicated handling of sub-object allocation failures - seg6: fix traceroute in the presence of SRv6 - tipc: fix a kernel-infoleak in __tipc_sendmsg()" * tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) selftests: set amt.sh executable Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks" sfc: The RX page_ring is optional iavf: Fix limit of total number of queues to active queues of VF i40e: Fix incorrect netdev's real number of RX/TX queues i40e: Fix for displaying message regarding NVM version i40e: fix use-after-free in i40e_sync_filters_subtask() i40e: Fix to not show opcode msg on unsuccessful VF MAC change ieee802154: atusb: fix uninit value in atusb_set_extended_addr mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh mac80211: initialize variable have_higher_than_11mbit sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc netrom: fix copying in user data in nr_setsockopt udp6: Use Segment Routing Header for dest address if present icmp: ICMPV6: Examine invoking packet for Segment Route Headers. seg6: export get_srh() for ICMP handling Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register" ipv6: Do cleanup if attribute validation fails in multipath route ipv6: Continue processing multipath route even if gateway attribute is invalid net/fsl: Remove leftover definition in xgmac_mdio ...
-
