- 31 Aug, 2005 1 commit
-
-
Jeff Garzik authored
Dumb typo spotted by Mark Lord.
-
- 30 Aug, 2005 24 commits
-
-
Jeff Garzik authored
ATAPI is getting close to being ready. To increase exposure, we enable the code in the upstream kernel, but default it to off (present behavior). Users must pass atapi_enabled=1 as a module option (if module) or on the kernel command line (if built in) to turn on discovery of their ATAPI devices.
-
Linus Torvalds authored
Merge refs/heads/upstream-fixes from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Andrew Morton authored
Damir Perisa <damir.perisa@solnet.ch> reports: drivers/net/s2io.h:765: error: invalid lvalue in assignment drivers/net/s2io.h:766: error: invalid lvalue in assignment That's a gcc4 error. I don't see why the casts are there anyway.. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
David Gibson authored
The {BEGIN,END}_FTR_SECTION asm macros used in ppc64 to nop out sections of code at runtime cannot be nested. However, we do nest them in hash_low.S. We get away with it there, because there is nothing between the BEGIN markers for each section. However, that's confusing to someone reading the code. This patch removes the nested ifset and ifclr feature sections, replacing them with a single feature section in the full mask/value form. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Joel Schopp authored
This patch fixes a rare memory leak found by Coverity. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Joel Schopp authored
Coverity found more unused code. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Anton Blanchard authored
While ppc64 has the CONFIG_HZ Kconfig option, it wasnt actually being used. Connect it up and set all platforms to 250Hz. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jake Moilanen authored
Here's the 970MP's PVR (processor version register) entry for oprofile. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Olof Johansson authored
Some RS64-based machines (p620, F80, others) have problems with firmware returning 0xdeadbeef instead of failure to allocations that end at the 1GB mark. We have two options: 1. Detect the undocumented 0xdeadbeef return value and interpret it as a failure. 2. Avoid allocating that high. (2) is really the cleaner solution here. 768MB is plenty of room so use that as the max alloc_top instead of 1GB. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
They differed in either simple comments or in the protecting ifdefs. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Move the identical files from include/asm-ppc{,64}/ to include/asm-powerpc/. Remove hdreg.h completely as it is unused in the tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
The ppc and ppc64 trees are hopefully going to merge over time, so this patch begins the process by creating a place for the merging of the header files. Create include/asm-powerpc (and move linkage.h into it from asm-{ppc,ppc64} since we don't like empty directories). Modify the ppc and ppc64 Makefiles to cope. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Take some assignments out of vio_register_device_common and rename it to vio_register_device. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Formatting changes to vio.c to bring it closer to the kernel coding standard. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
gcc 3.4 (at least the build we are using) puts the gcc generated .ident string into a .note section at the end of the files it compiles (gcc 3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section). This means that the lparmap.s file we produce in the iSeries build may end with a .note section. When we include it into head.S, the assembler can no longer resolve some of the conditional branches since the target label ends up too far away. This patch just forces us back to the .text section after including lparmap.s. The breakage was caused by my patch "iSeries build with newer assemblers and compilers" (sha1-id: 2ad56496). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
A mistake rebasing the series of ppc64 head.S cleanup patches meant the #include of lparmap.s, needed for iSeries was lost. This patch puts it back again. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Andrew Morton authored
With CONFIG_HUGETLB_PAGE=n: In file included from kernel/sysctl.c:37: include/linux/hugetlb.h:104:1: warning: "hugetlb_free_pgd_range" redefined In file included from include/linux/mm.h:36, from kernel/sysctl.c:23: include/asm/pgtable.h:492:1: warning: this is the location of the previous definition Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
-
Nick Piggin authored
Defer copying of ptes until fault time when it is possible to reconstruct the pte from backing store. Idea from Andi Kleen and Nick Piggin. Thanks to input from Rik van Riel and Linus and to Hugh for correcting my blundering. Ray Fucillo <fucillo@intersystems.com> reports: "I applied this latest patch to a 2.6.12 kernel and found that it does resolve the problem. Prior to the patch on this machine, I was seeing about 23ms spent in fork for ever 100MB of shared memory segment. After applying the patch, fork is taking about 1ms regardless of the shared memory size." Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
- 29 Aug, 2005 15 commits
-
-
Arnaldo Carvalho de Melo authored
This makes the send rate calculations behave way more closely to what is specified, with the jitter previously seen on x and x_recv disappearing completely on non lossy setups. This resembles the tcp_data_snd_check code, that possibly we'll end up using in DCCP as well, perhaps moving this code to inet_connection_sock. For now I'm doing the simplest implementation tho. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
So that applications can set dccp_sock->dccps_pkt_size, that in turn is used in the CCID3 half connection init routines to set ccid3hc[tr]x_s and use it in its rate calculations. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harald Welte authored
This target allows users to modify the hoplimit header field of the IPv6 header. Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Harald Welte authored
This new iptables target allows manipulation of the TTL of an IPv4 packet. Signed-off-by: Harald Welte <laforge@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Renaming it to dccp_rx_hist_detect_loss. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Renaming it to dccp_rx_hist_add_packet. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
I'll now take a look at the other proposed TFRC DCCP CCIDs to find more code that is now in ccid3.c and move to this module, the loss event rate, calc_X, etc most probably will be moved there. The main goal of these changes is to pave the way for the implementation of more TFRC based DCCP CCIDs and to shrink ccid3.c, reducing its complexity and helping in getting it rock solid. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
And put this into net/dccp/ccids/lib/, where packet_history.[ch] will also be moved and then we'll have a tfrc_lib.ko module that will be used by dccp_ccid3.ko and other CCIDs that are variations of TFRC (RFC 3448). Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
To avoid open coding this all over the place. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Introducing functions to add to or subtract from a timeval variable and renaming now_delta to timeval_new_delta that calls do_gettimeofday and then timeval_delta, that should be used when there are several deltas made relative to the current time or setting variables to it, so as to avoid calling do_gettimeofday excessively. I'm leaving these "timeval_" prefixed funcions internal to DCCP for a while till we're sure there are no subtle bugs in it. It also is more correct as it checks if the number of usecs added to or subtracted from a tv_usec field is more than 2 seconds. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
No code changes. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
This is not quite what I think we should have long term but improves performance for now, so lets use it till we get CCID3 working well, then we can think about using sk_write_queue, perhaps using some ideas from Juwen Lai's old stack for 2.4.20. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-