- 25 May, 2017 40 commits
-
-
Johan Hovold authored
commit 65f92164 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit fff1abc4 upstream. Make sure to release the snd_card also on a late allocation error. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Alyssa Milburn authored
commit 950e252c upstream. Otherwise the i2c transfer functions can read or write beyond the end of stack or heap buffers. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
Alyssa Milburn authored
commit 821117dc upstream. Return an error rather than memcpy()ing beyond the end of the buffer. Internal callers use appropriate sizes, but digitv_i2c_xfer may not. Signed-off-by:
-
Daniel Scheller authored
commit 158f0328 upstream. Fixes "w_scan -f c" complaining with This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org) Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Acked-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Alyssa Milburn authored
commit ee0fe833 upstream. This code copies actual_length-128 bytes from the header, which will underflow if the received buffer is too small. Signed-off-by:
-
Johan Hovold authored
commit d5823511 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
commit a5cb00eb upstream. Clock should be turned off after calling s5p_mfc_init_hw() from the watchdog worker, like it is already done in the s5p_mfc_open() which also calls this function. Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit aa58fedb upstream. Make sure to check the number of endpoints to avoid accessing memory beyond the endpoint array should a device lack the expected endpoints. Note that, as far as I can tell, the gspca framework has already made sure there is at least one endpoint in the current alternate setting so there should be no risk for a NULL-pointer dereference here. Fixes: b517af72 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams") Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Marek Szyprowski authored
commit 0c32b8ec upstream. Interrupt routine must wake process waiting for given interrupt AFTER updating driver's internal structures and contexts. Doing it in-between is a serious bug. This patch moves all calls to the wake() function to the end of the interrupt processing block to avoid potential and real races, especially on multi-core platforms. This also fixes following issue reported from clock core (clocks were disabled in interrupt after being unprepared from the other place in the driver, the stack trace however points to the different place than s5p_mfc driver because of the race): WARNING: CPU: 1 PID: 18 at drivers/clk/clk.c:544 clk_core_unprepare+0xc8/0x108 Modules linked in: CPU: 1 PID: 18 Comm: kworker/1:0 Not tainted 4.10.0-next-20170223-00070-g04e18bc99ab9-dirty #2154 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: pm pm_runtime_work [<c010d8b0>] (unwind_backtrace) from [<c010a534>] (show_stack+0x10/0x14) [<c010a534>] (show_stack) from [<c033292c>] (dump_stack+0x74/0x94) [<c033292c>] (dump_stack) from [<c011cef4>] (__warn+0xd4/0x100) [<c011cef4>] (__warn) from [<c011cf40>] (warn_slowpath_null+0x20/0x28) [<c011cf40>] (warn_slowpath_null) from [<c0387a84>] (clk_core_unprepare+0xc8/0x108) [<c0387a84>] (clk_core_unprepare) from [<c0389d84>] (clk_unprepare+0x24/0x2c) [<c0389d84>] (clk_unprepare) from [<c03d4660>] (exynos_sysmmu_suspend+0x48/0x60) [<c03d4660>] (exynos_sysmmu_suspend) from [<c042b9b0>] (pm_generic_runtime_suspend+0x2c/0x38) [<c042b9b0>] (pm_generic_runtime_suspend) from [<c0437580>] (genpd_runtime_suspend+0x94/0x220) [<c0437580>] (genpd_runtime_suspend) from [<c042e240>] (__rpm_callback+0x134/0x208) [<c042e240>] (__rpm_callback) from [<c042e334>] (rpm_callback+0x20/0x80) [<c042e334>] (rpm_callback) from [<c042d3b8>] (rpm_suspend+0xdc/0x458) [<c042d3b8>] (rpm_suspend) from [<c042ea24>] (pm_runtime_work+0x80/0x90) [<c042ea24>] (pm_runtime_work) from [<c01322c4>] (process_one_work+0x120/0x318) [<c01322c4>] (process_one_work) from [<c0132520>] (worker_thread+0x2c/0x4ac) [<c0132520>] (worker_thread) from [<c0137ab0>] (kthread+0xfc/0x134) [<c0137ab0>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) ---[ end trace 1ead49a7bb83f0d8 ]--- Fixes: af935746 ("[media] MFC: Add MFC 5.1 V4L2 driver") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Lee Jones authored
commit 43c0c039 upstream. Currently when the RC Core is enabled (reachable) core code located in cec_register_adapter() attempts to populate the RC structure with a pointer to the 'parent' passed in by the caller. Unfortunately if the caller did not specify RC capability when calling cec_allocate_adapter(), then there will be no RC structure to populate. This causes a "NULL pointer dereference" error. Fixes: f51e8080 ("[media] cec: pass parent device in register(), not allocate()") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Srinivas Pandruvada authored
commit 5d9854ea upstream. This change undo the change done by 'commit 3bec2474 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3")' as this breaks some USB/i2c sensor hubs. Instead of relying on HW for restoring poll and hysteresis, driver stores and restores on resume (S3). In this way user space modified settings are not lost for any kind of sensor hub behavior. In this change, whenever user space modifies sampling frequency or hysteresis driver will get the feature value from the hub and store in the per device hid_sensor_common data structure. On resume callback from S3, system will set the feature to sensor hub, if user space ever modified the feature value. Fixes: 3bec2474 ("iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3") Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
Song, Hongyan <hongyan.song@intel.com> Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Matt Ranostay authored
commit 84ca8e36 upstream. AS3935_WRITE_DATA macro bit is incorrect and the actual write sequence is two leading zeros. Cc: George McCollister <george.mccollister@gmail.com> Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Dan Carpenter authored
commit ee0d8d84 upstream. We should call ipxitf_put() if the copy_to_user() fails. Reported-by:
李强 <liqiang6-s@360.cn> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Johan Hovold authored
commit bec444cd upstream. Add missing sanity check on the non-SuperSpeed hub-descriptor length in order to avoid parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes (or a compound-device debug statement). Note that we only make sure that the DeviceRemovable field is always present (and specifically ignore the unused PortPwrCtrlMask field) in order to continue support any hubs with non-compliant descriptors. As a further safeguard, the descriptor buffer is also cleared. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Johan Hovold authored
commit 2c25a2c8 upstream. A SuperSpeed hub descriptor does not have any variable-length fields so bail out when reading a short descriptor. This avoids parsing and leaking two bytes of uninitialised slab data through sysfs removable-attributes. Fixes: dbe79bbe ("USB 3.0 Hub Changes") Cc: John Youn <John.Youn@synopsys.com> Acked-by:
-
Johan Hovold authored
commit 6aeb75e6 upstream. Fix a division-by-zero in set_termios when debugging is enabled and a high-enough speed has been requested so that the divisor value becomes zero. Instead of just fixing the offending debug statement, cap the baud rate at the base as a zero divisor value also appears to crash the firmware. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reviewed-by:
-
Johan Hovold authored
commit 26cede34 upstream. Drop erroneous cpu_to_le32 when setting the baud rate, something which corrupted the divisor on big-endian hosts. Found using sparse: warning: incorrect type in argument 1 (different base types) expected unsigned int [unsigned] [usertype] val got restricted __le32 [usertype] <noident> Fixes: af2ac1a0 ("USB: serial mct_usb232: move DMA buffers to heap") Reviewed-by:
Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by:
-
Bjørn Mork authored
commit 8d7a10dd upstream. In their infinite wisdom, and never ending quest for end user frustration, Lenovo has decided to use new USB device IDs for the wwan modules in their 2017 laptops. The actual hardware is still the Sierra Wireless EM7455 or EM7430, depending on region. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Daniele Palmas authored
commit 40dd4604 upstream. This patch adds support for Telit ME910 PID 0x1100. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit dd5ca753 upstream. Drop erroneous le16_to_cpu when returning the USB device speed which is already in host byte order. Found using sparse: warning: cast to restricted __le16 Fixes: 946b960d ("USB: add driver for iowarrior devices.") Signed-off-by:
-
Tony Lindgren authored
commit 3c50ffef upstream. Commit d8e5f0ec ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") caused a regression where musb keeps trying to enable host mode with no cable connected. This seems to be caused by the fact that now phy is enabled earlier, and we are wrongly trying to force USB host mode on an OTG port. The errors we are getting are "trying to suspend as a_idle while active". For ports configured as OTG, we should not need to do anything to try to force USB host mode on it's OTG port. Trying to force host mode in this case just seems to completely confuse the musb state machine. Let's fix the issue by making musb_host_setup() attempt to force the mode only if port_mode is configured for host mode. Fixes: d8e5f0ec ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error") Cc: Johan Hovold <johan@kernel.org> Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reported-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
commit 6df2b42f upstream. We have one register for each EP to set the maximum packet size for both TX and RX. If for example an RX programming would happen before the previous TX transfer finishes we would reset the TX packet side. To fix this issue, only modify the TX or RX part of the register. Fixes: 550a7375 ("USB: Add MUSB and TUSB support") Signed-off-by:
-
Thinh Nguyen authored
commit d325a1de upstream. The dwc3 driver can overwite its previous events if its top-half IRQ handler (TH) gets invoked again before processing the events in the cache. We see this as a hang in the file transfer and the host will attempt to reset the device. TH gets the event count and deasserts the interrupt line by writing DWC3_GEVNTSIZ_INTMASK to DWC3_GEVNTSIZ. If there's a new event coming between reading the event count and interrupt deassertion, dwc3 will lose previous pending events. More generally, we will see 0 event count, which should not affect anything. This shouldn't be possible in the current dwc3 implementation. However, through testing and reading the PCIe trace, the TH occasionally still gets invoked one more time after HW interrupt deassertion. (With PCIe legacy interrupts, TH is called repeatedly as long as the interrupt line is asserted). We suspect that there is a small detection delay in the SW. To avoid this issue, Check DWC3_EVENT_PENDING flag to determine if the events are processed in the bottom-half IRQ handler. If not, return IRQ_HANDLED and don't process new event. Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Ben Hutchings authored
commit bf05b65a upstream. dvb-usb-dibusb-mc-common is licensed under GPLv2, and if we don't say so then it won't even load since it needs a GPL-only symbol. Fixes: e91455a1 ("[media] dvb-usb: split out common parts of dibusb") Reported-by:
Dominique Dumont <dod@debian.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alyssa Milburn authored
commit a12b8ab8 upstream. Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and heap buffers. Signed-off-by:
-
Johan Hovold authored
commit 03eb2a55 upstream. Make sure to check for the required out endpoint to avoid dereferencing a NULL-pointer in mce_request_packet should a malicious device lack such an endpoint. Note that this path is hit during probe. Fixes: 66e89522 ("V4L/DVB: IR: add mceusb IR receiver driver") Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Johan Hovold authored
commit eacb975b upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 2a9f8b5d ("V4L/DVB (5206): Usbvision: set alternate interface modification") Cc: Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Johan Hovold authored
commit 75cf0679 upstream. Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by:
-
Peter Chen authored
commit 7480d912 upstream. According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit a0c16630 upstream. Intel Denverton microserver is Atom based and need the PME and CAS quirks as well. Signed-off-by:
-
Alan Stern authored
commit 63aea0db upstream. With threaded interrupts, bottom-half handlers are called with interrupts enabled. Therefore they can't safely use spin_lock(); they have to use spin_lock_irqsave(). Lockdep warns about a violation occurring in xhci_irq(): ========================================================= [ INFO: possible irq lock inversion dependency detected ] 4.11.0-rc8-dbg+ #1 Not tainted --------------------------------------------------------- swapper/7/0 just changed the state of lock: (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>] ehci_hrtimer_func+0x29/0xc0 [ehci_hcd] but this lock took another, HARDIRQ-unsafe lock in the past: (hcd_urb_list_lock){+.....} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hcd_urb_list_lock); local_irq_disable(); lock(&(&ehci->lock)->rlock); lock(hcd_urb_list_lock); <Interrupt> lock(&(&ehci->lock)->rlock); *** DEADLOCK *** no locks held by swapper/7/0. the shortest dependencies between 2nd lock and 1st lock: -> (hcd_urb_list_lock){+.....} ops: 252 { HARDIRQ-ON-W at: __lock_acquire+0x602/0x1280 lock_acquire+0xd5/0x1c0 _raw_spin_lock+0x2f/0x40 usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore] xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd] finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd] xhci_irq+0xdd6/0x1fa0 [xhci_hcd] usb_hcd_irq+0x26/0x40 [usbcore] irq_forced_thread_fn+0x2f/0x70 irq_thread+0x149/0x1d0 kthread+0x113/0x150 ret_from_fork+0x2e/0x40 This patch fixes the problem. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 4b148d51 upstream. platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Matthias Lange authored
commit 5db851cf upstream. There is no reason to restrict allocations to the first 16MB ISA DMA addresses. It is causing problems in a virtualization setup with enabled IOMMU (x86_64). The result is that USB is not working in the VM. Signed-off-by:
Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by:
-
Mathias Nyman authored
commit 604d02a2 upstream. In 4.11 TRB completion codes were renamed to match spec. Completion codes for command ring stopped and endpoint stopped were mixed, leading to failures while handling a stopped command ring. Use the correct completion code for command ring stopped events. Fixes: 0b7c105a ("usb: host: xhci: rename completion codes to match spec") Signed-off-by:
-
Yazen Ghannam authored
commit eb77e6b8 upstream. The wrong index into the csbases/csmasks arrays was being passed to the function to compute the chip select sizes, which resulted in the wrong size being computed. Address that so that the correct values are computed and printed. Also, redo how we calculate the number of pages in a CS row. Reported-by:
Benjamin Bennett <benbennett@gmail.com> Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1493313114-11260-1-git-send-email-Yazen.Ghannam@amd.com [ Remove unneeded integer math comment, minor cleanups. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jan Kara authored
commit 13e451fd upstream. Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Toshi Kani authored
commit 8d13c029 upstream. ND_CMD_CLEAR_ERROR command returns 'clear_err.cleared', the length of error actually cleared, which may be smaller than its requested 'len'. Change nvdimm_clear_poison() to call nvdimm_forget_poison() with 'clear_err.cleared' when this value is valid. Fixes: e046114a ("libnvdimm: clear the internal poison_list when clearing badblocks") Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
David Howells authored
commit deccf497 upstream. stat/lstat/fstatat need to pass AT_NO_AUTOMOUNT to vfs_statx() as the pre-statx code didn't set LOOKUP_AUTOMOUNT, even though fstatat() accepted the AT_NO_AUTOMOUNT flag. Fixes: a528d35e ("statx: Add a system call to make enhanced file info available") Reported-by:
Ian Kent <raven@themaw.net> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Johan Hovold authored
commit 63afd5cc upstream. Add missing endianness conversion when applying the Alea timeout quirk. Found using sparse: warning: restricted __le16 degrades to integer Fixes: e4a886e8 ("hwrng: chaoskey - Fix URB warning due to timeout on Alea") Cc: Bob Ham <bob.ham@collabora.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Keith Packard <keithp@keithp.com> Signed-off-by:
-
