The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.

Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.comSigned-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.

Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.comSigned-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.

Here's an example, if you enable the following events:

echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable

Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:

echo 0 > /debug/tracing/events/net/net_dev_xmit/enable

and look at the trace:

cat /debug/tracing/trace
            sshd-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
            sshd-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
            sshd-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
            sshd-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:

cat /debug/tracing/trace
           <...>-2672  [001] ..s2   375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s1   376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
           <...>-2672  [001] ..s2   377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s1   377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
           <...>-2672  [001] ..s2   377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
           <...>-2672  [001] ..s1   377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0

The stored "sshd" comm has been flushed out and we get a useless "<...>".

But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

If comm recording is not enabled when trace_printk() is used then
you just get this type of output:

[ adding trace_printk("hello! %d", irq); in do_IRQ ]

           <...>-2843  [001] d.h.    80.812300: do_IRQ: hello! 14
           <...>-2734  [002] d.h2    80.824664: do_IRQ: hello! 14
           <...>-2713  [003] d.h.    80.829971: do_IRQ: hello! 14
           <...>-2814  [000] d.h.    80.833026: do_IRQ: hello! 14

By enabling the comm recorder when trace_printk is enabled:

       hackbench-6715  [001] d.h.   193.233776: do_IRQ: hello! 21
            sshd-2659  [001] d.h.   193.665862: do_IRQ: hello! 21
          <idle>-0     [001] d.h1   193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.

This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.

On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.

Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.comSigned-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".

Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsitaSigned-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().

There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

 * remove old string conversions with kstrto*

Link: http://lkml.kernel.org/r/20120926200838.GC1244@0x90.atSigned-off-by: Daniel Walter <sahne@0x90.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

FYI, there are new sparse warnings:

 arch/x86/kernel/cpu/perf_event.c:1356:18: sparse: symbol 'events_attr' was not declared. Should it be static?

This patch makes it static and also adds the static keyword to
fix arch/x86/kernel/cpu/perf_event.c:1344:9: warning: symbol
'events_sysfs_show' was not declared.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: fengguang.wu@intel.com
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-lerdpXlnruh0yvWs2owwuizl@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements, fixes and code move from Arnaldo Carvalho de Melo:

 * Initialize 'page_size' variable in the python binding, this was sent
   for perf/urgent by mistake, then when merging Ingo removed it, fixing
   the problem for perf/urgent, but when perf/urgent was merged with
   perf/core, where that initialization is needed, made the python
   binding mmap call to fail, fix it by initializing page_size again.

 * Add a browser for 'perf script' and make it available from the report
   and annotate browsers. It does filtering to find the scripts that
   handle events found in the perf.data file used. From Feng Tang

 * Move some functions from symbol.c to more appropriate files, creating
   dso.[ch] in the process, no code changes. From Jiri Olsa

 * Fix mmap error output message for when perf_mmap fails and returns
   !-EPERM, where the default for mmap_pages, INT_MAX, was causing a
   !power of 2 error message, fix from Jiri Olsa.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

The commit 0c1fe6b:

 'perf tools: Have the page size value available for all tools'

Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.

Fix it by initializing it on the binding init routine.
Reported-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The mmap_pages default value is not power of 2 (UINT_MAX).

Together with perf_evlist__mmap function returning error value different
from EPERM, we get misleading error message: "--mmap_pages/-m value must
be a power of two."

Fixing this by adding extra check for UINT_MAX value for this error
condition.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350743599-4805-12-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

With this function, other modules can basically check whether a file is
a legal perf data file by checking its first 8 bytes against all
possible perf magic numbers.

Change the function name from check_perf_magic to more meaningful
is_perf_magic as suggested by acme.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-7-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Integrate the script browser into "perf report" framework, users can use
function key 'r' or the drop down menu to list all perf scripts and
select one of them, just like they did for the annotation.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-6-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Integrate the script browser into annotation, users can press function
key 'r' to list all perf scripts and select one of them to run that
script, the output will be shown in a separate browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-5-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Create a script browser, so that user can check all the available
scripts for current perf data file and run them inside the main perf
report or annotation browsers, for all perf samples or for samples
belong to one thread/symbol.

Please be noted: current script browser is only for report use, and
doesn't cover the record phase, IOW it must run against one existing
perf data file.

The work flow is, users can use function key to list all the available
scripts for current perf data file in system and chose one, which will
be executed with popen("perf script -s xxx.xx",) and all the output
lines are put into one ui browser, pressing 'q' or left arrow key will
make it return to previous browser.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-4-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As suggested by Arnaldo, many scripts have their own usages and need
capture specific events or tracepoints, so only those scripts whose
target events match the events in current perf data file should be
listed in the script browser menu.

This patch will add the event match checking, by opening "xxx-record"
script to cherry pick out all events name and comparing them with
those inside the perf data file.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-3-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.

Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:

1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.

2. For further feature like runtime switching to another perf data file,
this variable can also help.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Moving dso_* related functions into dso object.

Keeping symbol loading related functions still in the symbol object as
it seems more convenient.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Moving strxfrchar function into string object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Moving hex2u64 function into util object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Moving BUILD_ID_SIZE define into build-id object, plus include related
changes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Moving build_id__sprintf function into build-id object.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The callers of parse_events usually have their own error handling.  Move
the fprintf for a bad event to parse_events_options, which is the only
one who should need it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351283415-13170-25-git-send-email-andi@firstfloor.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements from Arnaldo Carvalho de Melo:

 * perf inject changes to allow showing where a task sleeps, from Andrew Vagin.

 * Makefile improvements from Namhyung Kim.

 * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.

So provide --pre and --post command hooks to allow doing just that.

  perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
	-- make -s -j64 O=defconfig-build/ bzImage
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Otherwise they will be not written in an output file.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-5-git-send-email-avagin@openvz.org
[ committer note: Fixed up wrt changes made in the immediate previous patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

You may want to know where and how long a task is sleeping. A callchain
may be found in sched_switch and a time slice in stat_iowait, so I add
handler in perf inject for merging this events.

My code saves sched_switch event for each process and when it meets
stat_iowait, it reports the sched_switch event, because this event
contains a correct callchain. By another words it replaces all
stat_iowait events on proper sched_switch events.

I use the next sequence of commands for testing:

  perf record -e sched:sched_stat_sleep -e sched:sched_switch \
	      -e sched:sched_process_exit -g -o ~/perf.data.raw \
	      ~/test-program
  perf inject -v -s -i ~/perf.data.raw -o ~/perf.data
  perf report --stdio -i ~/perf.data
   100.00%	foo  [kernel.kallsyms]  [k] __schedule
               	|
                --- __schedule
                    schedule
                   |
                   |--79.75%-- schedule_hrtimeout_range_clock
                   |          schedule_hrtimeout_range
                   |          poll_schedule_timeout
                   |          do_select
                   |          core_sys_select
                   |          sys_select
                   |          system_call_fastpath
                   |          __select
                   |          __libc_start_main
                   |
                    --20.25%-- do_nanosleep
                              hrtimer_nanosleep
                              sys_nanosleep
                              system_call_fastpath
                              __GI___libc_nanosleep
                              __libc_start_main

 And here is test-program.c:

 #include<unistd.h>
 #include<time.h>
 #include<sys/select.h>

 int main()
 {
	struct timespec ts1;
	struct timeval tv1;
	int i;
	long s;

	for (i = 0; i <  10; i++) {
		ts1.tv_sec = 0;
		ts1.tv_nsec = 10000000;
		nanosleep(&ts1, NULL);

		tv1.tv_sec = 0;
		tv1.tv_usec = 40000;
		select(0, NULL, NULL, NULL,&tv1);
	}
	return 1;
 }
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org
[ committer note: Made it use evsel->handler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Before this patch "perf inject" can only handle data from pipe.

I want to use "perf inject" for reworking events. Look at my following patch.

v2: add information about new options in tools/perf/Documentation/
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-2-git-send-email-avagin@openvz.org
[ committer note: fixed it up to cope with 5852a445, 5ded57ac, 002439e8 & f62d3f0f ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently checking mmap support in libelf failed due to wrong flags.

    CHK libelf
    CHK libdw
    CHK libunwind
    CHK -DLIBELF_MMAP
/tmp/ccYJwdR0.o: In function `main':
:(.text+0x18): undefined reference to `elf_begin'
collect2: error: ld returned 1 exit status

This cannot happen since we checked the elf_begin() when checking
libelf and it succeeded.

Fix it by using a same flag with libelf checking.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-5-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It might be useful to see what's happening behind us rather than just
waiting few seconds during the config checking.

Also align the CHK message with other ones.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-4-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This will show directory change info in a consistent form.  Also it can
be converted again into David Howell's descend command.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-3-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Documentation targets handling rules are duplicate.  Consolidate them
with DOC_TARGETS and INSTALL_DOC_TARGETS.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-2-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ingo reported (again!) that 'make clean' on perf/traceevent does not
work due to some reason with system header file. Quotes Ingo:

 "Note that the old dependency related build failure thought to be
  fixed in commit 860df583 is back:

   make[1]: *** No rule to make target
   `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  'make clean' itself does not work in libtraceevent:

   comet:~/tip/tools/lib/traceevent> make clean
   make: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  So I had to clean it out manually:

   comet:~/tip/tools/lib/traceevent> git ls-files --others | xargs rm
   comet:~/tip/tools/lib/traceevent>

  and then things build fine."

Try to fix it by excluding system headers from dependency generation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351241752-2919-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core trace improvements from Arnaldo Carvalho de Melo:

 * Don't stop synthesizing threads when one vanishes, this is for
   the existing threads when we start a tool like trace.

 * Use sched:sched_stat_runtime to provide a thread summary, this
   produces the same output as the 'trace summary' subcommand of
   tglx's original "trace" tool.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

[root@sandy ~]# perf trace --sched --duration 0.100 --pid `pidof firefox`
<SNIP>
 17079.847 ( 0.009 ms): 17643 poll(ufds: 140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
 17079.892 ( 0.010 ms): 17643 read(fd: 4, buf: 140038178943092, count: 4096         ) = -1 EAGAIN Resource temporarily unavailable
 17079.921 ( 0.013 ms): 17643 poll(ufds: 140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
 17079.949 ( 0.009 ms): 17643 read(fd: 4, buf: 140038178943092, count: 4096         ) = -1 EAGAIN Resource temporarily unavailable
^C
 _____________________________________________________________________
 __)    Summary of events    (__

              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]
 _____________________________________________________________________

             firefox - 17643 :      18013   [ 72.2% ]    359.110 ms
             firefox - 17663 :         41   [  0.2% ]     21.439 ms
             firefox - 17664 :       6840   [ 27.4% ]    133.642 ms
             firefox - 17667 :         46   [  0.2% ]      0.682 ms
[root@sandy ~]#

This is equivalent to the 'perf trace summary' subcomand in the tmp.perf/trace2
branch.

Another example, setting a huge duration filter to get just a system
wide summary:

[root@sandy ~]# perf trace --duration 10000.0 --sched
^C
 _____________________________________________________________________
 __)    Summary of events    (__

              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]
 _____________________________________________________________________

           scsi_eh_1 - 258   :         15   [  0.0% ]      0.133 ms
        kworker/0:1H - 322   :         13   [  0.0% ]      0.032 ms
         jbd2/dm-0-8 - 384   :          4   [  0.0% ]      0.115 ms
         flush-253:0 - 470   :          1   [  0.0% ]      0.027 ms
             firefox - 950   :       4783   [  0.1% ]     24.863 ms
             firefox - 992   :       1883   [  0.1% ]      6.808 ms
             firefox - 995   :         35   [  0.0% ]      0.111 ms
         ksoftirqd/6 - 4362  :          2   [  0.0% ]      0.005 ms
         ksoftirqd/7 - 4365  :          1   [  0.0% ]      0.007 ms
                Xorg - 4671  :        148   [  0.0% ]      0.912 ms
     gnome-settings- - 4846  :         14   [  0.0% ]      0.086 ms
     seahorse-daemon - 4847  :         14   [  0.0% ]      0.092 ms
         gnome-panel - 4875  :         46   [  0.0% ]      0.159 ms
     gnome-power-man - 4918  :         16   [  0.0% ]      0.065 ms
     gvfs-afc-volume - 4992  :         77   [  0.0% ]      0.136 ms
     gnome-screensav - 5114  :         24   [  0.0% ]      0.128 ms
               xchat - 8082  :        466   [  0.0% ]      2.019 ms
            synergyc - 8369  :        941   [  0.0% ]      3.291 ms
            synergyc - 8371  :         85   [  0.0% ]      1.817 ms
         jbd2/dm-4-8 - 9352  :          4   [  0.0% ]      0.109 ms
             rpcbind - 9786  :          3   [  0.0% ]      0.017 ms
        rtkit-daemon - 12802 :         10   [  0.0% ]      0.038 ms
        rtkit-daemon - 12803 :          8   [  0.0% ]      0.000 ms
       udisks-daemon - 13020 :         27   [  0.0% ]      0.240 ms
         kworker/7:0 - 14651 :        669   [  0.0% ]      2.616 ms
         kworker/5:1 - 16220 :          2   [  0.0% ]      0.069 ms
         kworker/4:0 - 19776 :         13   [  0.0% ]      0.176 ms
             openvpn - 20131 :        133   [  0.0% ]      0.762 ms
     plugin-containe - 20508 :      60658   [  1.7% ]    131.153 ms
        npviewer.bin - 20520 :      72208   [  2.0% ]    138.945 ms
        npviewer.bin - 20542 :         35   [  0.0% ]      0.074 ms
        npviewer.bin - 20543 :         30   [  0.0% ]      0.074 ms
        npviewer.bin - 20547 :         35   [  0.0% ]      0.092 ms
        npviewer.bin - 20552 :         35   [  0.0% ]      0.093 ms
                sshd - 20645 :         32   [  0.0% ]      0.071 ms
        npviewer.bin - 21053 :         35   [  0.0% ]      0.074 ms
        npviewer.bin - 21054 :         35   [  0.0% ]      0.097 ms
         kworker/0:2 - 21169 :        149   [  0.0% ]      1.143 ms
         kworker/3:0 - 22171 :        113   [  0.0% ]     96.892 ms
         flush-253:4 - 22410 :          1   [  0.0% ]      0.028 ms
         kworker/6:0 - 24581 :         25   [  0.0% ]      0.275 ms
         kworker/1:0 - 25572 :          4   [  0.0% ]      0.103 ms
         kworker/2:1 - 26299 :        138   [  0.0% ]      1.440 ms
         kworker/0:0 - 26325 :          1   [  0.0% ]      0.003 ms
                perf - 26330 :    3506967   [ 96.1% ]   6648.310 ms
[root@sandy ~]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-mzuli0srnxyi1o029py6537x@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The nr_events in trace__run was local, but we will need it in other
trace methods, move it to struct trace.

We'll also need the number of events per thread, so introduce a
nr_events method for that in struct thread_trace.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ksutaz0mtejnf7e6az3ca1td@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf_event__synthesize_threads routine synthesizes all the existing
threads in the system, because we don't have any kernel facilities to
ask for PERF_RECORD_{FORK,MMAP,COMM} for existing threads.

It was returning an error as soon as one thread couldn't be synthesized,
which is a bit extreme when, for instance, a forkish workload is
running, like a kernel compile.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i7oas1eodpoer2bx38fwyasv@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>