Currently ALSA sequencer core tries to process the queued events as
much as possible when they become dispatchable.  If applications try
to queue too massive events to be processed at the very same timing,
the sequencer core would still try to process such all events, either
in the interrupt context or via some notifier; in either away, it
might be a cause of RCU stall or such problems.

As a potential workaround for those problems, this patch adds the
upper limit of the amount of events to be processed.  The remaining
events are processed in the next batch, so they won't be lost.

For the time being, it's limited up to 1000 events per queue, which
should be high enough for any normal usages.
Reported-by: Zqiang <qiang.zhang1211@gmail.com>
Reported-by: syzbot+bb950e68b400ab4f65f8@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211102033222.3849-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/r/20211207165146.2888-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The miXart timer notification is a variable length, and if a hardware
is screwed up, we may access over the actual data size.  Let's add a
sanity check and bail out if an invalid value is received.

Link: https://lore.kernel.org/r/20211207153323.27098-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Clang warns:

sound/ppc/beep.c:103:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
        case SND_TONE: break;
        ^
sound/ppc/beep.c:103:2: note: insert 'break;' to avoid fall-through
        case SND_TONE: break;
        ^
        break;
1 warning generated.

Clang is more pedantic than GCC, which does not warn when failing
through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst.
Add athe missing break to silence the warning.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20211207110053.695712-1-anders.roxell@linaro.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

The mixart_timer_notify structure was larger than could be represented
by the mixart_msg_data array storage. Adjust the size to as large as
possible to fix the warning seen with -Warray-bounds builds:

sound/pci/mixart/mixart_core.c: In function 'snd_mixart_threaded_irq':
sound/pci/mixart/mixart_core.c:447:50: error: array subscript 'struct mixart_timer_notify[0]' is partly outside array bounds of 'u32[128]' {aka 'unsigned int[128]'} [-Werror=array-bounds]
  447 |                                 for(i=0; i<notify->stream_count; i++) {
      |                                                  ^~
sound/pci/mixart/mixart_core.c:328:12: note: while referencing 'mixart_msg_data'
  328 | static u32 mixart_msg_data[MSG_DEFAULT_SIZE / 4];
      |            ^~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207062941.2413679-1-keescook@chromium.orgSigned-off-by: Takashi Iwai <tiwai@suse.de>

Practically seen, CONFIG_PM is almost mandatory.
Let's drop the ugly ifdef lines and simplify the code.

Link: https://lore.kernel.org/r/20211202084053.18201-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Tis patch try to remove useless NULL check before kfree
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Link: https://lore.kernel.org/r/20211206014135.320720-1-bernard@vivo.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some comments and include guards are not consistent with the name of the
file where they can be found.

This is likely some typo or cut'n'paste issues.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7b2bcbda298f02a34d46d8b6593daaaed9a09a45.1638602790.git.christophe.jaillet@wanadoo.frSigned-off-by: Takashi Iwai <tiwai@suse.de>

The vendor ID of Presonus Studio 1810c had a superfluous '0' in its
USB ID.  Drop it.

Fixes: 8dc5efe3 ("ALSA: usb-audio: Add support for Presonus Studio 1810c")
Link: https://lore.kernel.org/r/20211202083833.17784-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

There's a system that reports a bogus HDMI audio interface:
$ cat eld#2.0
monitor_present         1
eld_valid               1
monitor_name
connection_type         DisplayPort
eld_version             [0x2] CEA-861D or below
edid_version            [0x3] CEA-861-B, C or D
manufacture_id          0xe430
product_id              0x690
port_id                 0x0
support_hdcp            0
support_ai              0
audio_sync_delay        0
speakers                [0xffff] FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
sad_count               0

Since playing audio is not possible without SAD, also consider ELD is
invalid for this case.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211202073338.1384768-1-kai.heng.feng@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix compile error when OSS_DEBUG is enabled:
    sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger':
    sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first
    use in this function); did you mean 'csubstream'?
      pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
              ^

Fixes: 61efcee8 ("ALSA: oss: Use standard printk helpers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Link: https://lore.kernel.org/r/1638349134-110369-1-git-send-email-cuibixuan@linux.alibaba.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

With NHLT enriched with new search functions, remove local code in
favour of them. This also fixes broken behaviour: search should be based
on significant bits count rather than container size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211126140355.1042684-4-cezary.rojewski@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Only DMIC endpoint presence is relevant, not its configuration.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211126140355.1042684-3-cezary.rojewski@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Two key operations missings are: endpoint presence-check and retrieval
of matching endpoint hardware configuration (blob). Add operations for
both use cases.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211126140355.1042684-2-cezary.rojewski@intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

HDA uses a timecounter to read a hardware clock running at 24 MHz. The
conversion factor is set with a mult value of 125 and a shift value of 0,
which is not converting the hardware clock to nanoseconds, it is converting
to 1/3 nanoseconds because the conversion factor from 24Mhz to nanoseconds
is 125/3. The usage sites divide the "nanoseconds" value returned by
timecounter_read() by 3 to get a real nanoseconds value.

There is a lengthy comment in azx_timecounter_init() explaining this
choice. That comment makes blatantly wrong assumptions about how
timecounters work and what can overflow.

The comment says:

     * Applying the 1/3 factor as part of the multiplication
     * requires at least 20 bits for a decent precision, however
     * overflows occur after about 4 hours or less, not a option.

timecounters operate on time deltas between two readouts of a clock and use
the mult/shift pair to calculate a precise nanoseconds value:

    delta_nsec = (delta_clock * mult) >> shift;

The fractional part is also taken into account and preserved to prevent
accumulated rounding errors. For details see cyclecounter_cyc2ns().

The mult/shift pair has to be chosen so that the multiplication of the
maximum expected delta value does not result in a 64bit overflow. As the
counter wraps around on 32bit, the maximum observable delta between two
reads is (1 << 32) - 1 which is about 178.9 seconds.

That in turn means the maximum multiplication factor which fits into an u32
will not cause a 64bit overflow ever because it's guaranteed that:

     ((1 << 32) - 1) ^ 2 < (1 << 64)

The resulting correct multiplication factor is 2796202667 and the shift
value is 26, i.e. 26 bit precision. The overflow of the multiplication
would happen exactly at a clock readout delta of 6597069765 which is way
after the wrap around of the hardware clock at around 274.8 seconds which
is off from the claimed 4 hours by more than an order of magnitude.

If the counter ever wraps around the last read value then the calculation
is off by the number of wrap arounds times 178.9 seconds because the
overflow cannot be observed.

Use clocks_calc_mult_shift(), which calculates the most accurate mult/shift
pair based on the given clock frequency, and remove the bogus comment along
with the divisions at the readout sites.

Fixes: 5d890f59 ("ALSA: hda: support for wallclock timestamps")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/871r35kwji.ffs@tglxSigned-off-by: Takashi Iwai <tiwai@suse.de>

Fix a sparse warning that complains about the inconsistent type
assignment for iface, which is a restricted type of
snd_ctl_elem_iface_t.

Fixes: a135dfb5 ("ALSA: led control - add sysfs kcontrol LED marking layer")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/202111201028.xduVYgH5-lkp@intel.com
Link: https://lore.kernel.org/r/20211123170247.2962-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The previous fix for more comprehensive runtime PM calls turned out to
be not good as hoped; a few calls including pm_runtime_enable() and
pm_runtime_disable() are rather utterly superfluous for PCI devices,
even triggering a kernel error message.  Better to drop those calls.

Note that the problem we wanted to solve with that commit seems
irrelevant with the fix itself; the original bug (a GPF at
azx_remove()) was likely a regression by the recent PCI core cleanup,
and the buggy PCI change has been already reverted.  So basically we
were scratching a wrong surface.  OTOH, making the runtime PM calls
symmetric for both probe and remove is more consistent, and maybe
that's a sensible outcome.

Fixes: 4f66a9ef ("ALSA: hda: intel: More comprehensive PM runtime setup for controller driver")
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d9d76980-966a-e031-70d1-3254ba5be5eb@gmail.com
Link: https://lore.kernel.org/r/20211119162730.24423-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The HD-audio codec driver remove may happen also at dynamically
unbinding during operation, hence it needs manual triggers of
snd_device_disconnect() calls, while it's missing for the jack objects
that are associated with the codec.

This patch adds the manual disconnection call for jacks when the
remove happens without card->shutdown (i.e. not under the full
removal).

Link: https://lore.kernel.org/r/20211117133040.20272-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

This is a second attempt to unify the x86-specific SG-buffer handling
code with the new standard non-contiguous page handler.

The first try (in commit 2d9ea399) failed due to the wrong page
and address calculations, hence reverted.  (And the second try failed
due to a copy&paste error.)  Now it's corrected with the previous fix
for noncontig pages, and the proper sg page iteration by this patch.

After the migration, SNDRV_DMA_TYPE_DMA_SG becomes identical with
SNDRV_DMA_TYPE_NONCONTIG on x86, while others still fall back to
SNDRV_DMA_TYPE_DEV.
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Harald Arnesen <harald@skogtun.org>
Link: https://lore.kernel.org/r/20211017074859.24112-4-tiwai@suse.de
Link: https://lore.kernel.org/r/20211109062235.22310-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20211116073358.19741-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

When a codec is unbound dynamically via sysfs while its stream is in
use, we may face a potential deadlock at the proc remove or a UAF.
This happens since the hda_pcm is managed by a linked list, as it
handles the hda_pcm object release via kref.

When a PCM is opened at the unbinding time, the release of hda_pcm
gets delayed and it ends up with the close of the PCM stream releasing
the associated hda_pcm object of its own.  The hda_pcm destructor
contains the PCM device release that includes the removal of procfs
entries.  And, this removal has the sync of the close of all in-use
files -- which would never finish because it's called from the PCM
file descriptor itself, i.e. it's trying to shoot its foot.

For addressing the deadlock above, this patch changes the way to
manage and release the hda_pcm object.  The kref of hda_pcm is
dropped, and instead a simple refcount is introduced in hda_codec for
keeping the track of the active PCM streams, and at each PCM open and
close, this refcount is adjusted accordingly.  At unbinding, the
driver calls snd_device_disconnect() for each PCM stream, then
synchronizes with the refcount finish, and finally releases the object
resources.

Fixes: bbbc7e85 ("ALSA: hda - Allocate hda_pcm objects dynamically")
Link: https://lore.kernel.org/r/20211116072459.18930-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: d13bd412 ("ALSA: hda - Manage kcontrol lists")
Link: https://lore.kernel.org/r/20211116071314.15065-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: a8ff48cb ("ALSA: pcm: Free chmap at PCM free callback, too")
Link: https://lore.kernel.org/r/20211116071314.15065-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

snd_ctl_remove() has to be called with card->controls_rwsem held (when
called after the card instantiation).  This patch add the missing
rwsem calls around it.

Fixes: 9058cbe1 ("ALSA: jack: implement kctl creating for jack devices")
Link: https://lore.kernel.org/r/20211116071314.15065-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Bose Revolve+ SoundLink (0a57:40fa) advertises invalid dB level for
the speaker volume.  This patch provides the correction in the mixer
map quirk table entry.

Note that this requires the prerequisite change to add min_mute flag
to the dB map table.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1192375
Link: https://lore.kernel.org/r/20211116065415.11159-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Some devices do mute the volume at the minimal volume, and for such
devices, we need to set SNDRV_CTL_TLVT_DB_MINMAX_MUTE to the TLV
information.  It corresponds to setting usb_mixer_elem_info.min_mute
flag in the USB-audio driver.

This patch adds a new field min_mute in usbmix_dB_map so that the
mixer map entry can pass the flag.

Link: https://lore.kernel.org/r/20211116065415.11159-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The values in usbmix_dB_map should be rather signed while we're using
u32.  As the copied target (usb_mixer_elem_info.dBmin and dBmax) is
int, let's make them also int.

Link: https://lore.kernel.org/r/20211116065415.11159-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Currently we haven't explicitly enable and allow/forbid the runtime PM
at the probe and the remove phases of HD-audio controller driver, and
this was the reason of a GPF mentioned in the commit e81478bb
("ALSA: hda: fix general protection fault in azx_runtime_idle");
namely, even after the resources are released, the runtime PM might be
still invoked by the bound graphics driver during the remove of the
controller driver.  Although we've fixed it by clearing the drvdata
reference, it'd be also better to cover the runtime PM issue more
properly.

This patch adds a few more pm_runtime_*() calls at the probe and the
remove time for setting and cleaning up the runtime PM.  Particularly,
now more explicitly pm_runtime_enable() and _disable() get called as
well as pm_runtime_forbid() call at the remove callback, so that a
use-after-free should be avoided.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211110210307.1172004-1-kai.vehmanen@linux.intel.com
Link: https://lore.kernel.org/r/20211115075944.6972-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.

The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.

Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.

This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)

Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs cleanups from Darrick Wong:
 "The most 'exciting' aspect of this branch is that the xfsprogs
  maintainer and I have worked through the last of the code
  discrepancies between kernel and userspace libxfs such that there are
  no code differences between the two except for #includes.

  IOWs, diff suffices to demonstrate that the userspace tools behave the
  same as the kernel, and kernel-only bits are clearly marked in the
  /kernel/ source code instead of just the userspace source.

  Summary:

   - Clean up open-coded swap() calls.

   - A little bit of #ifdef golf to complete the reunification of the
     kernel and userspace libxfs source code"

* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: sync xfs_btree_split macros with userspace libxfs
  xfs: #ifdef out perag code for userspace
  xfs: use swap() to make dabtree code cleaner

Pull more parisc fixes from Helge Deller:
 "Fix a build error in stracktrace.c, fix resolving of addresses to
  function names in backtraces, fix single-stepping in assembly code and
  flush userspace pte's when using set_pte_at()"

* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/entry: fix trace test in syscall exit path
  parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
  parisc: Fix implicit declaration of function '__kernel_text_address'
  parisc: Fix backtrace to always include init funtion names

Pull arch/sh updates from Rich Felker.

* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
  sh: pgtable-3level: Fix cast to pointer from integer of different size
  sh: fix READ/WRITE redefinition warnings
  sh: define __BIG_ENDIAN for math-emu
  sh: math-emu: drop unused functions
  sh: fix kconfig unmet dependency warning for FRAME_POINTER
  sh: Cleanup about SPARSE_IRQ
  sh: kdump: add some attribute to function
  maple: fix wrong return value of maple_bus_init().
  sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
  sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
  sh: boards: Fix the cacography in irq.c
  sh: check return code of request_irq
  sh: fix trivial misannotations

Pull ARM fixes from Russell King:

 - Fix early_iounmap

 - Drop cc-option fallbacks for architecture selection

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9156/1: drop cc-option fallbacks for architecture selection
  ARM: 9155/1: fix early early_iounmap()

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h

Pull timer fix from Thomas Gleixner:
 "A single fix for POSIX CPU timers to address a problem where POSIX CPU
  timer delivery stops working for a new child task because
  copy_process() copies state information which is only valid for the
  parent task"

* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem

  Core code:

   - A regression fix for the Open Firmware interrupt mapping code where
     a interrupt controller property in a node caused a map property in
     the same node to be ignored.

  Interrupt chip drivers:

   - Workaround a limitation in SiFive PLIC interrupt chip which
     silently ignores an EOI when the interrupt line is masked.

   - Provide the missing mask/unmask implementation for the CSKY MP
     interrupt controller.

  PCI/MSI:

   - Prevent a use after free when PCI/MSI interrupts are released by
     destroying the sysfs entries before freeing the memory which is
     accessed in the sysfs show() function.

   - Implement a mask quirk for the Nvidia ION AHCI chip which does not
     advertise masking capability despite implementing it. Even worse
     the chip comes out of reset with all MSI entries masked, which due
     to the missing masking capability never get unmasked.

   - Move the check which prevents accessing the MSI[X] masking for XEN
     back into the low level accessors. The recent consolidation missed
     that these accessors can be invoked from places which do not have
     that check which broke XEN. Move them back to he original place
     instead of sprinkling tons of these checks all over the code"

* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  of/irq: Don't ignore interrupt-controller when interrupt-map failed
  irqchip/sifive-plic: Fixup EOI failed when masked
  irqchip/csky-mpintc: Fixup mask/unmask implementation
  PCI/MSI: Destroy sysfs before freeing entries
  PCI: Add MSI masking quirk for Nvidia ION AHCI
  PCI/MSI: Deal with devices lying about their MSI mask capability
  PCI/MSI: Move non-mask check back into low level accessors

Pull x86 static call update from Thomas Gleixner:
 "A single fix for static calls to make the trampoline patching more
  robust by placing explicit signature bytes after the call trampoline
  to prevent patching random other jumps like the CFI jump table
  entries"

* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  static_call,x86: Robustify trampoline patching

Pull scheduler fixes from Borislav Petkov:

 - Avoid touching ~100 config files in order to be able to select the
   preemption model

 - clear cluster CPU masks too, on the CPU unplug path

 - prevent use-after-free in cfs

 - Prevent a race condition when updating CPU cache domains

 - Factor out common shared part of smp_prepare_cpus() into a common
   helper which can be called by both baremetal and Xen, in order to fix
   a booting of Xen PV guests

* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Restore preemption model selection configs
  arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
  sched/fair: Prevent dead task groups from regaining cfs_rq's
  sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
  x86/smp: Factor out parts of native_smp_prepare_cpus()

Pull perf fixes from Borislav Petkov:

 - Prevent unintentional page sharing by checking whether a page
   reference to a PMU samples page has been acquired properly before
   that

 - Make sure the LBR_SELECT MSR is saved/restored too

 - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
   residual data left

* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Avoid put_page() when GUP fails
  perf/x86/vlbr: Add c->flags to vlbr event constraints
  perf/x86/lbr: Reset LBR_SELECT during vlbr reset

Pull x86 fixes from Borislav Petkov:

 - Add the model number of a new, Raptor Lake CPU, to intel-family.h

 - Do not log spurious corrected MCEs on SKL too, due to an erratum

 - Clarify the path of paravirt ops patches upstream

 - Add an optimization to avoid writing out AMX components to sigframes
   when former are in init state

* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add Raptor Lake to Intel family
  x86/mce: Add errata workaround for Skylake SKX37
  MAINTAINERS: Add some information to PARAVIRT_OPS entry
  x86/fpu: Optimize out sigframe xfeatures when in init state

Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Hardware tracing:

   - ARM:
      * Print the size of the buffer size consistently in hexadecimal in
        ARM Coresight.
      * Add Coresight snapshot mode support.
      * Update --switch-events docs in 'perf record'.
      * Support hardware-based PID tracing.
      * Track task context switch for cpu-mode events.

   - Vendor events:
      * Add metric events JSON file for power10 platform

  perf test:

   - Get 'perf test' unit tests closer to kunit.

   - Topology tests improvements.

   - Remove bashisms from some tests.

  perf bench:

   - Fix memory leak of perf_cpu_map__new() in the futex benchmarks.

  libbpf:

   - Add some more weak libbpf functions o allow building with the
     libbpf versions, old ones, present in distros.

  libbeauty:

   - Translate [gs]setsockopt 'level' argument integer values to
     strings.

  tools headers UAPI:

   - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
     with the kernel sources.

  Documentation:

   - Add documentation to 'struct symbol'.

   - Synchronize the definition of enum perf_hw_id with code in
     tools/perf/design.txt"

* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
  perf tests: Remove bash constructs from stat_all_pmu.sh
  perf tests: Remove bash construct from record+zstd_comp_decomp.sh
  perf test: Remove bash construct from stat_bpf_counters.sh test
  perf bench futex: Fix memory leak of perf_cpu_map__new()
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync sound/asound.h with the kernel sources
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools headers UAPI: Sync arch prctl headers with the kernel sources
  perf tools: Add more weak libbpf functions
  perf bpf: Avoid memory leak from perf_env__insert_btf()
  perf symbols: Factor out annotation init/exit
  perf symbols: Bit pack to save a byte
  perf symbols: Add documentation to 'struct symbol'
  tools headers UAPI: Sync files changed by new futex_waitv syscall
  perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
  perf arm-spe: Support hardware-based PID tracing
  perf arm-spe: Save context ID in record
  perf arm-spe: Update --switch-events docs in 'perf record'
  perf arm-spe: Track task context switch for cpu-mode events
  ...