- 02 Sep, 2019 5 commits
-
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc_probe_link_components() has paired soc_remove_link_components(), but, these are implemented at different place. So it is difficult to confirm code. This patch moves soc_probe_link_components() next to soc_remove_link_components(). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o90g7lbd.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc-dapm has snd_soc_dapm_free() which cleanups debugfs, widgets, list. But, there is no paired initialize function. This patch adds snd_soc_dapm_init() and initilaizing dapm Signed-off-by:
-
Kuninori Morimoto authored
Current ASoC setups some dapm related member at snd_soc_component_initialize() which is called when component was registered, and setups remaining member at soc_probe_component() which is called when component was probed. This kind of setup separation is no meanings, and it is very difficult to read and confusable. This patch setups all dapm settings at one place. Signed-off-by:
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc_probe_comonent() has paired soc_remove_comonent(), but, these are implemented at different place. So it is difficult to confirm code. This patch moves soc_probe_component() next to soc_remove_component(). Signed-off-by:
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. soc_rtd_init() was soc_post_component_init(), but there was no its paired soc_post_component_free(), but it is done at soc_remove_link_dais(). This means it is difficult to find related code. This patch adds soc_rtd_free() which is paired soc_rtd_init(). soc_rtd_xxx() will be more cleanuped in the future. Signed-off-by:
-
- 30 Aug, 2019 15 commits
-
-
Maxime Ripard authored
The Allwinner A64 SoC has an embedded audio codec that uses a separate controller to drive its analog part, which is supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/20190828125209.28173-5-mripard@kernel.orgReviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Ripard authored
The Allwinner A33 SoC have an embedded audio codec that is supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by:
-
Maxime Ripard authored
Even though the H6 compatible has been properly added, the exeption for the number of DMA channels hasn't been updated, leading in a validation warning. Fix this. Fixes: b2045303 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible") Signed-off-by:
-
Tzung-Bi Shih authored
Fix space issues: - No space before ';'. - No trailing blank line. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20190830074240.195166-5-tzungbi@google.comSigned-off-by:
-
Tzung-Bi Shih authored
The forward declaration of mt8183_mt6358_ts3a227_max98357_headset_init is for cyclic dependency between card, headset_dev, and headset_init. It used to be: - card depends on headset_dev - headset_dev depends on headset_init - headset_init depends on card Commit a962a809 ("ASoC: mediatek: mt8183: make headset codec optional") removed the cyclic dependency. Thus, it is safe to remove the forward declaration. Signed-off-by:
-
Tzung-Bi Shih authored
Move headset jack descriptor from module global scope to card-specific storage to make its ownership more explicit. Signed-off-by:
-
Tzung-Bi Shih authored
Move private structure to the beginning of file to declare earlier so that most functions can see it. Signed-off-by:
-
Pierre-Louis Bossart authored
We should only select SND_INTEL_NHLT when ACPI is defined. This was done for the legacy HDAudio driver but not for DSP-enabled cases, leading to compilation errors with randconfig. Fix by aligning on the same solution. For the Skylake driver this is overkill since there is a top-level dependency on ACPI, but it doesn't hurt and it's better to have consistency. Fixes: 68b953ae ('ASoC: SOF: Intel: hda: fixup HDaudio topology name with DMIC number') Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190829214213.11653-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Cezary Rojewski authored
With legacy ADSP private context adjusted, there is no need for double safety. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190822113616.22702-5-cezary.rojewski@intel.comTested-by:
-
Cezary Rojewski authored
With legacy ADSP private context adjusted, there is no need for double safety. Signed-off-by:
-
Cezary Rojewski authored
With legacy ADSP private context adjusted, there is no need for double safety. Signed-off-by:
-
Cezary Rojewski authored
Apart from Haswell machines, all other devices have their private data set to snd_soc_acpi_mach instance. Changes for HSW/ BDW boards introduced with series: https://patchwork.kernel.org/cover/10782035/ added support for dai_link platform_name adjustments within card probe routines. These take for granted private_data points to snd_soc_acpi_mach whereas for Haswell, it's sst_pdata instead. Change private context of platform_device - representing machine board - to address this. Fixes: e87055d7 ("ASoC: Intel: haswell: platform name fixup support") Fixes: 7e40ddcf ("ASoC: Intel: bdw-rt5677: platform name fixup support") Fixes: 2d067b28 ("ASoC: Intel: broadwell: platform name fixup support") Signed-off-by:
-
Peter Ujfalusi authored
The davinci McBSP (davinci-i2s) driver does not implement the set_sysclk callback, which is fine and should not be treated as error. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190830103841.25128-5-peter.ujfalusi@ti.comSigned-off-by:
-
Peter Ujfalusi authored
Most of the daVinci devices does not boot with DT. In this case the DMA channel is looked up with dma_slave_map and for that the chan_names[] must be configured. Both McASP and ASP/McBSP uses "tx" and "rx" as channel names, so we can just do this when the dev->of_node is not valid. Signed-off-by:
-
Peter Ujfalusi authored
ASP/McBSP can support 8/16/20/24/32 bits word in theory. I have only tested S16_LE and S32_LE, the other formats might not work so only extend the supported formats with S32_LE for now. Signed-off-by:
-
- 28 Aug, 2019 4 commits
-
-
Srinivas Kandagatla authored
On this codec SLIMBus RX path supports 384000 rate on primary interpolator. Add this missing rate as supported rate. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20190822095653.7200-3-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Vidyakumar Athota authored
Most of the modern codecs supports 352.8KHz and 384KHz sample rates. Currenlty HW params fails to set 352.8Kz and 384KHz sample rate as these are not in known rates list. Add these new rates to known list to allow them. This patch also adds defines in pcm.h so that drivers can use it. Signed-off-by:
Vidyakumar Athota <vathota@codeaurora.org> Signed-off-by:
Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
-
Jiaxin Yu authored
This patch correct tdm out bck inverse register to AUDIO_TOP_CON3[3]. Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/1566621445-26989-4-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Jiaxin Yu authored
This patch refined tdm driver code, and allow tdm hw to support two configurations in machine driver to output tdm signal or i2s signal. Signed-off-by:
-
- 27 Aug, 2019 13 commits
-
-
Michał Mirosław authored
Enable support for left-justified data mode for SSC-codec link. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/44fa6b700421e80778f20ff9ead2b148cf6d2e92.1566677788.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Michał Mirosław authored
Rework DAI format calculation in preparation for adding more formats later. As a side-effect this enables all CBM/CBS x CFM/CFS combinations for supported formats. (Note: the additional modes are not tested.) Note: this changes FSEDGE to POSITIVE for I2S CBM_CFS mode as the TXSYN interrupt is not used anyway. Signed-off-by:
-
Michał Mirosław authored
Allow SSC to be used on platforms described using audio-graph-card in Device Tree. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/233d5461f4448df151755de7b69a0cd3ad310d5c.1566677788.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Shengjiu Wang authored
Use force_suspend/resume to make sure clocks are disabled/enabled accordingly during system suspend/resume. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1566944026-18113-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Amadeusz Sławiński authored
Currently topology is kept in memory while driver is running. It's unnecessary, as it's only needed during parsing. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-6-amadeuszx.slawinski@linux.intel.comReviewed-by:
-
Amadeusz Sławiński authored
When we are printing module params, we were actually printing module id instead of type, but debug message was saying that number we get is type. So print module type, as it is useful when debugging paths, but also keep printing module id, as it is used in all other logs. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Link: https://lore.kernel.org/r/20190827141712.21015-5-amadeuszx.slawinski@linux.intel.comReviewed-by:
-
Dan Carpenter authored
The device_link_add() function only returns NULL on error, it doesn't return error pointers. Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Maxime Ripard authored
The last set of reworks included some fixes to change the A83t behaviour and "fix" it. It turns out that the controller described in the datasheet and the one supported here are not the same, yet the A83t has the two of them, and the one supported in the driver wasn't the one described in the datasheet. Fix this by reintroducing the proper quirks. Fixes: 69e450e5 ("ASoC: sun4i-i2s: Fix the LRCK period on A83t") Fixes: bf943d52 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t") Fixes: 2e04fc4d ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t") Fixes: 515fcfbc ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs") Fixes: c1d3a921 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs") Fixes: fb19739d ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs") Fixes: 71137bcd ("ASoC: sun4i-i2s: Move the format configuration to a callback") Fixes: d70be625 ("ASoC: sun4i-i2s: Move the channel configuration to a callback") Reported-by:
Chen-Yu Tsai <wens@csie.org> Tested-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap_wc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 202acc56 ("ASoC: SOF: imx: Add i.MX8 HW support") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Tzung-Bi Shih authored
Remove unused variable mt8183_mt6358_ts3a227_max98357_dapm_widgets and mt8183_mt6358_ts3a227_max98357_dapm_routes. They are accidentially included when rebasing commits. Fixes: 6191cbde ("ASoC: mediatek: mt8183: switch tdm pins gpio function when playback on or off") Signed-off-by:
-
Maxime Ripard authored
This reverts commit 3e9acd7a (ASoC: sun4i-i2s: Remove duplicated quirks structure"). It turns out that while one I2S controller is described in the A83t datasheet, the driver supports another, undocumented, one that has been inherited from the older SoCs, while the documented one uses the new design. Fixes: 3e9acd7a ("ASoC: sun4i-i2s: Remove duplicated quirks structure") Signed-off-by:
-
Shengjiu Wang authored
This platform device is registered from "fsl_audmix", which is its parent device. If use pdev->dev.parent for the priv->card.dev, the value set by dev_set_drvdata in parent device will be covered by the value in child device. Fixes: b86ef536 ("ASoC: fsl: Add Audio Mixer machine driver") Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
-
YueHaibing authored
Fix sparse warnings: sound/soc/sof/imx/imx8.c:104:6: warning: symbol 'imx8_dsp_handle_reply' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:115:6: warning: symbol 'imx8_dsp_handle_request' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:336:5: warning: symbol 'imx8_get_bar_index' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:341:6: warning: symbol 'imx8_ipc_msg_data' was not declared. Should it be static? sound/soc/sof/imx/imx8.c:348:5: warning: symbol 'imx8_ipc_pcm_params' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
- 23 Aug, 2019 1 commit
-
-
Kuninori Morimoto authored
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. From function name point of view, "soc_post_component_init()" sounds like "component initialize function". But in reality it is rtd setup function. This patch renames soc_post_component_init() to soc_rtd_init() Signed-off-by:
-
- 22 Aug, 2019 2 commits
-
-
Kuninori Morimoto authored
Initialize component related list at random place is very difficult to read. This patch initialize it at snd_soc_component_initialize(). Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87y2zozazp.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Jaska Uimonen authored
sof_get_control_data returns negative values even though the return value is defined unsigned (size_t). So change the return value type to int and add the data size as pointer argument to sof_get_control_data to avoid ambiquity in the meaning of the return type. Fixes: cac974a5 ("ASoC: SOF: topology: use set_get_data in process load") Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jaska Uimonen <jaska.uimonen@intel.com> Link: https://lore.kernel.org/r/20190821211138.14618-1-jaska.uimonen@linux.intel.comSigned-off-by:
-
