Use kobj_to_dev() instead of container_of()

Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210607122451.36708-1-yuehaibing@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use kobj_to_dev() instead of container_of()

Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210607122533.10608-1-yuehaibing@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use kobj_to_dev() API instead of container_of().
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1624025283-56360-1-git-send-email-zhouchuangao@vivo.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the Sitronix st1232/st1633 touchscreen controller Device Tree
binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Martin Kepplinger <martink@posteo.de>
Link: https://lore.kernel.org/r/fbba650cff07780c28ad6dd8dbef5cc1451b7762.1623418065.git.geert+renesas@glider.beSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This trivial patch fixes two spelling typos in i8042.c:

- 'i8042_unlock_ship()' to 'i8042_unlock_chip()'
- 'i8042_controller init' to 'i8042_controller_init'
Signed-off-by: Tyson Moore <tyson@tyson.me>
Link: https://lore.kernel.org/r/20210612060753.28968-1-tyson@tyson.meSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

A simple analog joystick built on Low Power ATtiny85 Microcontroller.
Directional movements are measured with two 10 kΩ potentiometers
connected with a gimbal mechanism that separates the horizontal and
vertical movements. This joystick also has a select button that is actuated
when the joystick is pressed down.

Input events polled over the I2C bus.

Product page:
https://www.sparkfun.com/products/15168
Firmware and hardware sources:
https://github.com/sparkfun/Qwiic_Joystick

Tested on RPi4B and O4-iMX-NANO boards.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20210608223130.16830-2-oleg@kaa.org.uaSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add vendor prefix for SparkFun Electronics.
Update trivial-devices.yaml with SparkFun Qwiic Joystick description.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210608223130.16830-1-oleg@kaa.org.uaSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of legacy gpio API let's use newer gpiod API. This also allows us
to get rid of platform data.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-7-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This simplifies error handling paths and allows to get rid of
cy8ctmg110_remove() method.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-6-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Switch to using be16_to_cpup() instead of shifting and combining data by
hand.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-5-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

I2C core already configures interrupt as wakeup source when device is
registered using I2C_CLIENT_WAKE flag, so let's rely on it instead of
configuring it ourselves.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-4-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let platform specify whether the controller should be a wakeup source
by registering as I2C_CLIENT_WAKE.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-3-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Rely on the platform to set up interrupt polarity/type properly instead
of hard-coding falling edge.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of using platform data to specify GPIO that is used as interrupt
source, rely on the platform and I2C core to set it up properly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210603043726.3793876-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In the case where st->ch_map[GRTS_CH_PRESSURE] < GRTS_MAX_CHANNELS is false
and also st->ch_map[GRTS_CH_Z1] < GRTS_MAX_CHANNELS is false the variable
press is not initialized and contains garbage. In this situation
st->pressure is also false, so we do not actually use press value, but
it is impossible for the compiler to realize this, and it emits
"uninitialized variable" warning. Fix this by initializing press
to 0 and allows us to also remove an else clause that sets press to 0.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 60b7db91 ("Input: resistive-adc-touch - rework mapping of channels")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210603220809.155118-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral
is split into two peripherals: PON_HLOS and PON_PBS.  The
application processor only has write access to PON_HLOS which
limits it to only receiving PON interrupts.

Add support for the PMK8350 PON_HLOS peripheral so that its
KPDPWR_N and RESIN_N interrupts can be used to detect key
presses.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1620630064-16354-2-git-send-email-skakit@codeaurora.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add power key and resin compatible strings for the PMK8350 PMIC.
These are needed to distinguish key PON_HLOS register differences
between PMK8350 and previous PMIC PON modules.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620630064-16354-3-git-send-email-skakit@codeaurora.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.

The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.

Implement (optional) support for also enabling an "iovcc-supply".
The datasheet specifies a delay of ~ 10us before enabling VDD/VCC
after IOVCC is enabled, so make sure to enable IOVCC first.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.

The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.

Document (optional) support for controlling the regulator for IOVCC
using "iovcc-supply".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-1-stephan@gerhold.netSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

There is nothing in include/linux/input/cyttsp.h that might be of interes
to the kernel at large, so let's move this information into the driver
code and remove the header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Ferruh's email has been bouncing for quite some time ans Linus has agreed
to look over the driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210531052307.1433979-1-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of iterating over channels establish and use channel map to
retrieve data. As a side effect this will silence "uninitialized variable"
warnings.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/YLXR2brkc4H54xtK@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver is actually OF independent and doesn't need anything from OF (*).
Replace OF headers with mod_devicetable.h and property.h.

*) use of of_match_ptr() is actually wrong here, since it may provoke
   a compiler to warn about unused variable.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528151113.85943-2-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Validation script is not happy:

 resistive-adc-touch.c:53: warning: Function parameter or member 'x_plate_ohms' not described in 'grts_state'
 resistive-adc-touch.c:53: warning: Function parameter or member 'ch' not described in 'grts_state'

Describe parameters in kernel doc to make it happy.

Fixes: fb082cd5 ("Input: resistive-adc-touch - add support for z1 and z2 channels")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210528151113.85943-1-andriy.shevchenko@linux.intel.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of forcing interrupt trigger to be "falling edge" let's rely on the
platform to set it up according to how it is set up on a given board based
on data in device tree or ACPI tables.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/YK7iO96g+7yIC0l1@google.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The CYTTSP TMA340 chips have two supplies: VCPIN and
VDD for analog and digital voltage respectively.
Add some minimal code to obtain and enable these
regulators if need be.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-3-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The driver (both SPI and I2C interface) should probe from the compatible
strings, cypress,cy8ctma340 etc when using device tree, not as now, where
it is probing implicitly from the I2C/SPI node name "cypress,cyttsp-i2c"
etc.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-2-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This converts the CYTTSP "Cypress TrueTouch Standard Product"
to YAML bindings and fixes and adds some things in the process:

- Rename the bindings file to cypress,cy8ctma340 after the main
  product in the series.
- Add proper compatibles for the two known products:
  CY8CTMA340 and CY8CTST341.
- Deprecate "cypress,cyttsp-spi" and "cypress,cyttsp-i2c"
  because device compatibles should be named after the
  hardware and not after which bus they are connected to.
  The topology implicitly tells us which bus it is and what
  interface to used.
- Add VCPIN and VDD supplies, these are present just like
  on the CY8CTMA140.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-1-linus.walleij@linaro.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds support for the z1 and z2 channels. These are used to
calculate the applied pressure. As there is no common order of the
individual channels of a resistive touch ADC, support for
io-channel-names is added (although the DT bindings stated the driver
already supports these).
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210525054634.9134-5-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

For pressure calculation based on plates resistance we need some additional
properties:
- z1 and z2 channels with additional measurements between plates
- actual resistance of the touchscreen. Currently we use only
  X-resistance.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-4-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

To calculate the pressure on a restrictive touchscreen we need to know
resistance at least of X plate. Some calculations need to use both X and
Y values. So let's add generic properties which can be used by all
drivers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210525054634.9134-3-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the resistive-adc-touch binding to DT schema format using json-schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210525054634.9134-2-o.rempel@pengutronix.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with mainline to get the latest device tree bindings and kernel
APIs.

Unnecessary spaces have been replaced with tab space. This is done to
maintain code uniformity.
Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com>
Link: https://lore.kernel.org/r/20210428091050.ryr7kxlxre7uhye4@kewl-virtual-machineSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is a left-over from commit 1a59d1b8 ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 156")

Axe an empty and useless comment block.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fda981546203427a0ac86ef47f231239ad18ecfe.1618520227.git.christophe.jaillet@wanadoo.frSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

trivial-devices.yaml already provide bindings for fsl-mma8450.
Since input/fsl-mma8450.txt provides no extra value, lets remove it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210521192210.12839-1-clabbe@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Return error code -EINVAL rather than '0' when the combo devices are not
supported.

Fixes: fa71c605 ("Input: combine hil_kbd and hil_ptr drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix potential NULL pointer dereference in the auxtrace option parser

 - Fix access to PID in an array when setting a PID filter in 'perf ftrace'

 - Fix error return code in the 'perf data' tool and in maps__clone(),
   found using a static analysis tool from Huawei

* tag 'perf-tools-fixes-for-v5.12-2021-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf map: Fix error return code in maps__clone()
  perf ftrace: Fix access to pid in array when setting a pid filter
  perf auxtrace: Fix potential NULL pointer dereference
  perf data: Fix error return code in perf_data__create_dir()

Pull x86 perf fixes from Borislav Petkov:

 - Fix Broadwell Xeon's stepping in the PEBS isolation table of CPUs

 - Fix a panic when initializing perf uncore machinery on Haswell and
   Broadwell servers

* tag 'perf_urgent_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
  perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3