- 29 Aug, 2019 34 commits
-
-
Neil Armstrong authored
Add the Amlogic SM1 based Khadas VIM3L, sharing all the same features as the G12B based VIM3, but: - a different DVFS support since only a single cluster is available - audio is still not available on SM1 Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Tested-by:
-
Neil Armstrong authored
The Khadas VIM3 is also available as VIM3L with the Pin-to-pin compatible Amlogic SM1 SoC in the S905D3 variant package. Change the description to match the S905X3/D3/Y3 variants like the G12A description, and add the khadas,vim3l compatible. Signed-off-by:
-
Neil Armstrong authored
To prepare support of the Amlogic SM1 based Khadas VIM3, move the non-G12B specific nodes (all except DVFS and Audio) to a new meson-khadas-vim3.dtsi Signed-off-by:
-
Jerome Brunet authored
Add the reset to the TDM formatters of the g12a. This helps with channel mapping when a playback/capture uses more than 1 lane. Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Jerome Brunet authored
The clock controller dedicated to audio clocks also provides reset lines on the g12 SoC family Reviewed-by:
-
Neil Armstrong authored
This enables DVFS for the Amlogic SM1 based SEI610 board by: - Adding the SM1 SoC OPPs taken from the vendor tree - Selecting the SM1 Clock controller instead of the G12A one - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes. Each power supply can achieve 0.69V to 1.05V using a single PWM output clocked at 666KHz with an inverse duty-cycle. DVFS has been tested by running the arm64 cpuburn at [1] and cycling between all the possible cpufreq translations of the cpu cluster and checking the final frequency using the clock-measurer, script at [2]. [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25fSigned-off-by:
-
Christian Hewitt authored
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE. Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Signed-off-by:
-
Christian Hewitt authored
add the rc-tx3mini keymap to the ir node Signed-off-by:
-
Christian Hewitt authored
Swap to the rc-khadas keymap that maps the mouse button to KEY_MUTE. Signed-off-by:
-
Christian Hewitt authored
add the rc-wetek-play2 keymap to the ir node Signed-off-by:
-
Christian Hewitt authored
add the rc-wetek-hub keymap to the ir node Signed-off-by:
-
Christian Hewitt authored
add the rc-x96max keymap to the ir node Signed-off-by:
-
Christian Hewitt authored
add the rc-odroid keymap to the ir node Signed-off-by:
-
Neil Armstrong authored
Add the USB properties for the Amlogic SM1 Based SEI610 Board in order to support the USB DRD Type-C port and the USB3 Type A port. The USB DRD Type-C controller uses the ID signal to toggle the USB role between the DWC3 Host controller and the DWC2 Device controller. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Neil Armstrong authored
Add the HDMI support nodes for the Amlogic SM1 Based SEI610 Board. Signed-off-by:
-
Neil Armstrong authored
Replace the VPU-centric power domain controller by the generic system-wide Everything-Else power domain controller and setup the right power-domains properties on the VPU, Ethernet & USB nodes. Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-gxbb-odroidc2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p200.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-hwacom-amazetv.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxbb-p201.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: Additional items are not allowed (1800000, 1 were unexpected) meson-g12b-odroid-n2.dt.yaml: gpio-regulator-tf_io: states:0: [3300000, 0, 1800000, 1] is too long meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: Additional items are not allowed (3300000, 1 were unexpected) meson-gxl-s905x-nexbox-a95x.dt.yaml: gpio-regulator: states:0: [1800000, 0, 3300000, 1] is too long Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-p201.dt.yaml: ethernet@c9410000: snps,reset-delays-us: [[0, 10000, 1000000]] is too short Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: /: 'model' is a required property Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-g12a-x96-max.dt.yaml: /: compatible: ['amediatech,x96-max', 'amlogic,u200', 'amlogic,g12a'] is not valid under any of the given schemas Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-g12a-u200.dt.yaml: reset-controller@1004: compatible:0: 'amlogic,meson-g12a-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset'] meson-g12a-sei510.dt.yaml: reset-controller@1004: compatible:0: 'amlogic,meson-g12a-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-axg-s400.dt.yaml: mailbox@ff63c404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxl-s805x-libretech-ac.dt.yaml: ethernet-phy@8: compatible: ['ethernet-phy-id0181.4400', 'ethernet-phy-ieee802.3-c22'] is not valid under any of the given schemas Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' meson-gxl-s805x-libretech-ac.dt.yaml: periphs@c8834000: $nodename:0: 'periphs@c8834000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] meson-gxl-s805x-libretech-ac.dt.yaml: mailbox@404: compatible:0: 'amlogic,meson-gx-mhu' is not one of ['amlogic,meson-gxbb-mhu'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt'] meson-gxl-s805x-libretech-ac.dt.yaml: watchdog@98d0: compatible:0: 'amlogic,meson-gx-wdt' is not one of ['amlogic,meson-gxbb-wdt'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxl-s805x-libretech-ac.dt.yaml: spi@8c80: compatible:0: 'amlogic,meson-gx-spifc' is not one of ['amlogic,meson6-spifc', 'amlogic,meson-gxbb-spifc'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxbb-nanopi-k2.dt.yaml: reset-controller@4404: compatible:0: 'amlogic,meson-gx-reset' is not one of ['amlogic,meson8b-reset', 'amlogic,meson-gxbb-reset', 'amlogic,meson-axg-reset'] Signed-off-by:
-
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: Additional items are not allowed ('dmc' was unexpected) meson-gxl-s805x-libretech-ac.dt.yaml: vpu@d0100000: reg-names: ['vpu', 'hhi', 'dmc'] is too long The 'dmc' register area was replaced by the amlogic,canvas property which was introduced in commit f1726043 ("arm64: dts: meson-gx: add dmcbus and canvas nodes.") and commit cf342879 ("arm64: dts: meson-gx: Add canvas provider node to the vpu") Signed-off-by: -
Neil Armstrong authored
This fixes the following DT schemas check errors: meson-axg-s400.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-axg-s400.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-g12a-u200.dt.yaml: soc: ethernet@ff3f0000:reg:0: [0, 4282318848, 0, 65536, 0, 4284695872, 0, 8] is too long meson-g12a-u200.dt.yaml: ethernet@ff3f0000: reg: [[0, 4282318848, 0, 65536, 0, 4284695872, 0, 8]] is too short meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too long meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@c9410000:reg:0: [0, 3376480256, 0, 65536, 0, 3364046144, 0, 4] is too lon while here, also drop the redundant reg property from meson-gxl.dtsi because it had the same value as meson-gx.dtsi from which it inherits. Signed-off-by:
-
Kevin Hilman authored
Tested-by:
-
git://github.com/BayLibre/clk-mesonKevin Hilman authored
Amlogic clk dt bindings changes for v5.4 - 3rd round * add sm1 peripheral controller bindings
-
Kevin Hilman authored
Merge tag 'amlogic-drivers-2.1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into v5.4/dt64-2 soc: amlogic: updates for v5.4 (round 2) - add power domain controller
-
Neil Armstrong authored
Add the bindings for the Amlogic Everything-Else power domains, controlling the Everything-Else peripherals power domains. The bindings targets the Amlogic G12A and SM1 compatible SoCs, support for earlier SoCs will be added later. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 28 Aug, 2019 1 commit
-
-
Neil Armstrong authored
Add support for the General Purpose Amlogic Everything-Else Power controller, with the first support for G12A and SM1 SoCs dedicated to the VPU, PCIe, USB, NNA, GE2D and Ethernet Power Domains. Signed-off-by:
-
- 26 Aug, 2019 1 commit
-
-
Neil Armstrong authored
Update the documentation to support clock driver for the Amlogic SM1 SoC and expose the GP1, DSU and the CPU 1, 2 & 3 clocks. SM1 clock tree is very close, the main differences are : - each CPU core can achieve a different frequency, albeit a common PLL - a similar tree as the clock tree has been added for the DynamIQ Shared Unit - has a new GP1 PLL used for the DynamIQ Shared Unit - SM1 has additional clocks like for CSI, NanoQ an other components Signed-off-by:
-
- 20 Aug, 2019 4 commits
-
-
Nishka Dasgupta authored
The variable np in function meson_gx_socinfo_init takes the return value of of_find_compatible_node, which gets a node but does not put it. If this node is not put it may cause a memory leak. Hence put np after its usefulness has been exhausted. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by:
-
Neil Armstrong authored
Add support for the Amlogic SM1 Based SEI610 board. The SM1 SoC is a derivative of the G12A SoC Family with : - Cortex-A55 core instead of A53 - more power domains, including USB & PCIe - a neural network co-processor (NNA) - a CSI input and image processor - some changes in the audio complex, thus not yet enabled The SEI610 board is a derivative of the SEI510 board with : - removed ADC based touch button, replaced with 3x GPIO buttons - physical switch disabling on-board MICs - USB-C port for USB 2.0 OTG - On-board FTDI USB2SERIAL port for Linux console Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled. Signed-off-by:
-
Neil Armstrong authored
Add the compatible for the Amlogic SM1 Based SEI610 board. Signed-off-by:
-
Neil Armstrong authored
Add bindings for the new Amlogic SM1 SoC Family. It a derivative of the G12A SoC Family with : - Cortex-A55 core instead of A53 - more power domains - a neural network co-processor - a CSI input and image processor Signed-off-by:
-
