- 21 Jul, 2016 13 commits
-
-
Benjamin Herrenschmidt authored
Moving probe_machine() to after mmu init will cause the ppc_md fields relative to the hash table management to be overwritten. Since we have essentially disconnected the machine type from the hash backend ops, finish the job by moving them to a different structure. The only callback that didn't quite fix is update_partition_table since this is not specific to hash, so I moved it to a standalone variable for now. We can revisit later if needed. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fix ppc64e build failure in kexec] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Benjamin Herrenschmidt authored
pmac_declare_of_platform_devices() is already a machine initcall, thus it won't be called on a non-powermac machine. Testing for chrp there is pointless. Signed-off-by:
-
Benjamin Herrenschmidt authored
Instead, check for FW_FEATURE_SPLPAR. This should be roughtly equivalent as all pseries machiens that can have an HEA also support SPLPAR and no other machine type does. Signed-off-by:
-
Benjamin Herrenschmidt authored
Use the device-tree instead as we'll be moving probe_machine() out of early_setup Signed-off-by:
-
Benjamin Herrenschmidt authored
These days, memblocks is available later, so we can just allocate it as part of iob_init. Signed-off-by:
-
Benjamin Herrenschmidt authored
We move it into early_mmu_init() based on firmware features. For PS3, we have to move the setting of these into early_init_devtree(). Signed-off-by:
-
Benjamin Herrenschmidt authored
The SMU command buffer needs to be allocated below 2G using memblock. In the past, this had to be done very early from the arch code as memblock wasn't available past that point. That is no longer the case though, smu_init() is called from setup_arch() when memblock is still functional these days. So move the allocation to the SMU driver itself. Signed-off-by:
-
Benjamin Herrenschmidt authored
The various calls to establish exception endianness and AIL are now done from a single point using already established CPU and FW feature bits to decide what to do. Signed-off-by:
-
Benjamin Herrenschmidt authored
We move the function itself to pseries/firmware.c and call it along with almost all other flat device-tree parsers from early_init_devtree() Signed-off-by:
-
Benjamin Herrenschmidt authored
Instead of punching a hole in the linear mapping, just use normal cachable memory, and apply the flush sequence documented in the CPC625 (aka U3) user manual. This allows us to remove quite a bit of code related to the early allocation of the DART and the hole in the linear mapping. We can also get rid of the copy of the DART for suspend/resume as the original memory can just be saved/restored now, as long as we properly sync the caches. Signed-off-by:
-
Benjamin Herrenschmidt authored
There is really no need to do them that early, early_setup() runs before MMU is on, we should do the strict minimum there to get the MMU going. Signed-off-by:
-
Benjamin Herrenschmidt authored
Make it part of early_setup() as we really want the feature fixups to be applied before we turn on the MMU since they can have an impact on the various assembly path related to MMU management and interrupts. This makes 64-bit match what 32-bit does. Signed-off-by:
-
Benjamin Herrenschmidt authored
32 and 64-bit do a similar set of calls early on, we move it all to a single common function to make the boot code more readable. Signed-off-by:
-
- 20 Jul, 2016 2 commits
-
-
Benjamin Herrenschmidt authored
This provides an equivalent of of_fdt_match() for non-flat trees. This is more practical than matching an array of of_device_id structs when converting a bunch of existing users of of_fdt_match(). Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Tyrel Datwyler authored
The underlying slot hotplug registration code assumed multiple slots, but the actual implementation is broken for multiple slots. This went unnoticed for years do to the fact that PowerVM seems to only ever provide a single hotplug slot per PHB. Under qemu/kvm the hotplug slot model aligns more with x86 where multiple slots are presented under a single PHB. As seen in the following each additional slot after the first fails to register due to each slot always being compared against the first child node of the PHB in the device tree. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [Slot 0] registered rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 The registration logic is fixed so that each slot is compared against the existing child devices of the PHB in the device tree to determine present slots vs empty slots. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [C0] registered rpaphp: Slot [C1] registered rpaphp: Slot [C2] registered rpaphp: Slot [C3] registered rpaphp: Slot [C4] registered Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> [mpe: Massage changelog] Signed-off-by:
-
- 19 Jul, 2016 10 commits
-
-
Kevin Hao authored
It is seldom used in the kernel code and can be easily replaced by either RELOCATABLE or PPC32. So there is no reason to keep a separate kernel option for this. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Kevin Hao authored
It makes no sense to keep two separate RELOCATABLE config entries for ppc32 and ppc64 respectively. Merge them into one and move it to a common place. Signed-off-by:
-
Kevin Hao authored
In the current code, the RELOCATABLE will be forcedly enabled when enabling CRASH_DUMP. But for ppc32, the RELOCABLE also depend on ADVANCED_OPTIONS and select NONSTATIC_KERNEL. This will cause the following build error when CRASH_DUMP=y && ADVANCED_OPTIONS=n because the select of NONSTATIC_KERNEL doesn't take effect. arch/powerpc/include/asm/io.h: In function 'virt_to_phys': arch/powerpc/include/asm/page.h:113:26: error: 'virt_phys_offset' undeclared (first use in this function) #define VIRT_PHYS_OFFSET virt_phys_offset ^ It doesn't have any strong reasons to make the RELOCATABLE depend on ADVANCED_OPTIONS. So remove this dependency to fix this issue. Signed-off-by: -
John Allen authored
The sysfs interface used to handle PowerVM hotplug events should use the hotplug queue as well. PRRN events will soon be placing many hotplug events on the queue at once and we will need ordinary hotplug events to use the queue as well in order to ensure these events will still be handled and that proper serialization is maintained during the PRRN event. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Reviewed-by:
-
John Allen authored
Add handler for new hotplug interrupt. For memory and CPU hotplug events, we will add the hotplug errorlog to the hotplug workqueue. Since PCI hotplug is not currently supported in the kernel, PCI hotplug events are written to the rtas_log_bug and are handled by rtas_errd. Signed-off-by:
-
John Allen authored
In support of PAPR changes to add a new hotplug interrupt, introduce a hotplug workqueue to avoid processing hotplug events in interrupt context. We will also take advantage of the queue on PowerVM to ensure hotplug events initiated from different sources (HMC and PRRN events) are handled and serialized properly. Signed-off-by:
-
Andrew Donnellan authored
If kzalloc() fails when allocating adapter->guest in cxl_guest_init_adapter(), we call free_adapter() before erroring out. free_adapter() in turn attempts to dereference adapter->guest, which in this case is NULL. In free_adapter(), skip the adapter->guest cleanup if adapter->guest is NULL. Fixes: 14baf4d9 ("cxl: Add guest-specific code") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
-
Andrew Donnellan authored
Remove the CXL_KERNEL_API and CXL_EEH Kconfig options, as they were only needed to coordinate the merging of the cxlflash driver. Also remove the stub implementation of cxl_perst_reloads_same_image() in cxlflash which is only used if CXL_EEH isn't defined (i.e. never). Suggested-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Ian Munsie authored
pnv_cxl_enable_phb_kernel_api() grabs a reference to the cxl module to prevent it from being unloaded after the PHB has been switched to CX4 mode. This breaks the build when CONFIG_MODULES=n as module_mutex doesn't exist. However, if we don't have modules, we don't need to protect against the case of the cxl module being unloaded. As such, split the relevant code out into a function surrounded with #if IS_MODULE(CXL) so we don't try to compile it if cxl isn't being compiled as a module. Fixes: 5918dbc9b4ec ("powerpc/powernv: Add support for the cxl kernel api on the real phb") Reported-by: -
Aneesh Kumar K.V authored
This makes it easy to verify we are not overloading the bits. No functionality change by this patch. mpe: Cleanup more. Completely fixup whitespace, convert all UL values to ASM_CONST(), and replace all occurrences of 63-x with the actual shift. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
- 17 Jul, 2016 15 commits
-
-
Aneesh Kumar K.V authored
This patch adds the kernel command line disable_radix which disable the radix MMU mode even if firmware indicates radix support via ibm,pa-features device tree node. This helps in testing different MMU mode easily. Signed-off-by:
-
Aneesh Kumar K.V authored
We add a tlb flush variant, to flush LPID mappings. Signed-off-by:
-
Aneesh Kumar K.V authored
This update the machine dep callback such that we can use the same callback to register process table. The interface is updated such that we can easily call H_REGISTER_PROC_TBL hcall. The HCALL itself is introduced in a later patch. No functionality change introduced by this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
Update the PID switch as per ISA doc. slbia is needed in radix to invalidate any implementation specific lookaside information. We use the .long format due to build errors with the below compiler version. gcc (Ubuntu 5.3.1-14ubuntu2.1) 5.3.1 20160413 GNU assembler (GNU Binutils for Ubuntu) 2.26 CC arch/powerpc/mm//mmu_context_book3s64.o {standard input}: Assembler messages: {standard input}:506: Error: junk at end of line: `0x7' scripts/Makefile.build:291: recipe for target 'arch/powerpc/mm//mmu_context_book3s64.o' failed make[1]: *** [arch/powerpc/mm//mmu_context_book3s64.o] Error 1 Signed-off-by: -
Aneesh Kumar K.V authored
ISA 3.0 document hash table size in bytes = 2^(HTABSIZE + 18) No functionality change by this patch. Signed-off-by:
-
Aneesh Kumar K.V authored
This helps in easily identifying the MMU mode with which the kernel is operating. Signed-off-by:
-
Aneesh Kumar K.V authored
As per ISA, we need to do this only for architecture version 2.02 and earlier. This continued to work even for 2.07. But let's not do this for anything after 2.02. ISA 3.0 requires these top bits to be not cleared. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Currently we depend on mmu_has_feature to evalute to zero based on MMU_FTRS_POSSIBLE mask. In a later patch, we want to update radix_enabled() to runtime update the conditional operation to a jump instruction. This implies we cannot depend on MMU_FTRS_POSSIBLE mask. Instead define radix_enabled to return 0 if RADIX_MMU is not enabled. Signed-off-by:
-
Aneesh Kumar K.V authored
This switch few of the page table accessor to use the __raw variant and does the cpu to big endian conversion of constants. This helps in generating better code. For ex: a pgd_none(pgd) check with and without fix is listed below Without fix: ------------ 2240: 20 00 61 eb ld r27,32(r1) /* PGD level */ typedef struct { __be64 pgd; } pgd_t; static inline unsigned long pgd_val(pgd_t x) { return be64_to_cpu(x.pgd); 2244: 22 00 66 78 rldicl r6,r3,32,32 2248: 3e 40 7d 54 rotlwi r29,r3,8 224c: 0e c0 7d 50 rlwimi r29,r3,24,0,7 2250: 3e 40 c5 54 rotlwi r5,r6,8 2254: 2e c4 7d 50 rlwimi r29,r3,24,16,23 2258: 0e c0 c5 50 rlwimi r5,r6,24,0,7 225c: 2e c4 c5 50 rlwimi r5,r6,24,16,23 2260: c6 07 bd 7b rldicr r29,r29,32,31 2264: 78 2b bd 7f or r29,r29,r5 if (pgd_none(pgd)) 2268: 00 00 bd 2f cmpdi cr7,r29,0 226c: 54 03 9e 41 beq cr7,25c0 <__get_user_pages_fast+0x500> With fix: --------- 2370: 20 00 61 eb ld r27,32(r1) if (pgd_none(pgd)) 2374: 00 00 bd 2f cmpdi cr7,r29,0 2378: a8 03 9e 41 beq cr7,2720 <__get_user_pages_fast+0x530> break; Signed-off-by: -
Aneesh Kumar K.V authored
PowerISA 3.0 requires the MMU mode (radix vs. hash) of the hypervisor to be mirrored in the LPCR register, in addition to the partition table. This is done to avoid fetching from the table when deciding, among other things, how to perform transitions to HV mode on some interrupts. So let's set it up appropriately Signed-off-by:
-
Balbir Singh authored
The .longs with the shifts are harder to read, use more meaningful names for the opcodes. PPC_TLBIE_5 is introduced for the 5 opcode variation of the instruction due to an existing op-code for the 2 opcode variant. Signed-off-by:
-
Benjamin Herrenschmidt authored
When we know we will reassign all resources, trying (and failing) to allocate them initially is fairly pointless and leads to a lot of scary messages in the kernel log Signed-off-by:
-
Benjamin Herrenschmidt authored
If the firmware encounters an error (internal or HW) during initialization of a PHB, it might leave the device-node in the tree but mark it disabled using the "status" property. We should check it. Signed-off-by:
-
Benjamin Herrenschmidt authored
M64's are the configurable 64-bit windows that cover the 64-bit MMIO space. We used to hard code 16 windows. Newer chips might have a variable number and might need to reserve some as well (for example on PHB4/POWER9, M32 and M64 are actually unified and we use M64#0 to map the 32-bit space). So newer OPALs will provide a property we can use to know what range of windows is available. The property is named so that it can eventually support multiple ranges but we only use the first one for now. Signed-off-by:
-
Benjamin Herrenschmidt authored
If we don't find registers for the PHB or don't know the model specific invalidation method, use OPAL calls instead. Signed-off-by:
-
